Beruflich Dokumente
Kultur Dokumente
P R O D U C T I N F O R M A T I O N
Y H E
A
R A
P
D
S
S
®
TABLE OF CONTENTS
SRS Nozzles
Product Overview .................................................................................8
Product Features and Benefits ..............................................................9
Product Comparisons .......................................................................... 11
Product Performance ..........................................................................15
Installation and Maintenance ..............................................................15
Bubblers ..............................................................................................15
PS Spray Sprinklers
Product Overview ...............................................................................16
Product Features and Benefits ............................................................16
Product Performance ..........................................................................16
Product Comparisons ..........................................................................16
Technical Information .........................................................................16
Installation and Maintenance ..............................................................16
Specification Drawings .......................................................................16
ii
SRS Spray Bodies
PRODUCT OVERVIEW
S S P
R
R
S
A
Y
1
®
2
SRS Spray Bodies
Ratcheting Riser...
Quick arc alignment
The pop-up stem’s position can be quickly
and easily aligned by turning the riser assembly
to “ratchet” to the correct position. This
adjustment can be made while the sprinkler is
operating, allowing you to see exactly where
the water is going.
3
®
PRODUCT COMPARISON
FEATURES Hunter ® Rain Bird ® Rain Bird ® Toro ® Nelson ® Hardie ® HIT ®
SRS 1800 Uni-Spray 570Z PRO 6300 HS Proline
Exposed diameter 300 Stream Rotor 2" (5 cm) 21/4" (6 cm) 11/4" (4 cm) 2" (5 cm) 2" (5 cm) 17/8" (5 cm) 2" (5 cm)
Accepts popular female threaded nozzles � � � � � �
No flow by wiper seal � � � � � � �
Serviceable wiper seal � � � � � �
Optional field installed drain check valve � � � � �
Standard side-inlet on 6" or 12" � � � � � �
Adjustable arc nozzle available � � � � � �
Reclaimed water cap � � � �
Flush plug attached � � � � � � �
SPECIFICATION GUIDE
EXAMPLE: SRS - 04 - 10H
MODEL POP-UP HEIGHT NOZZLE SERIES PATTERN
SRS 00 = Shrub 8 = 8 Series A = Adjustable
02 = 2" Pop-up 10 = 10 Series Q = Quarter-Circle
04 = 4" Pop-up 12 = 12 Series H = Half-Circle
06 = 6" Pop-up 15 = 15 Series F = Full-Circle
12 = 12" Pop-up 17 = 17 Series
Note: Bodies and nozzles sold separately. Also compatible with Hunter's
bubbler and specialty nozzles.
TECHNICAL INFORMATION
4
SRS Spray Sprinklers
INSTALLATION DETAILS
FINISH GRADE
MODEL SRS-06
SPRAY HEAD
PVC TEE
R
Hunter
T.
PA
U.S.
21
1 , 5
24 2 ,
SRS-04 SRS-06
® ®
SRS-04. SRS-06SI.
FINISH GRADE
MODEL SRS-12
SPRAY HEAD
FINISH GRADE
PVC TEE
MODEL SRS-06
24 2 ,5
1 , U.S
21 . PAT
.
SPRAY HEAD
Hunter
R
R
PVC TEE
PVC LATERAL LINE
R
,24 2 ,
1 5
21
U.S
. PA
T.
Hunter R
R
R
SRS-06 SRS-12
® ®
SRS-06SJ. SRS-12SJ.
5
®
PRODUCT OVERVIEW
Compare one spray head to another and The clear advantage of the Adjustable
you’ll find what makes the difference are Arc nozzle is that there is no need to keep
the nozzles. That said, no other spray head an inventory of the many different odd arc
manufacturer can lay claim to a collection of nozzles seldom used on jobs.
nozzles as efficient as those made by Hunter.
With adjustable arc, fixed arc, side and corner When bubblers are selected to water
strips, stream sprays, and bubblers, Hunter plantings, Hunter has a better solution: the
spray head nozzles cover all the bases. When it PCN nozzle. This nozzle is a bubbler designed
comes to Hunter technology, if you can’t beat to fit onto a spray body. The nozzle threads
‘em, join ‘em. directly onto any female-thread spray head
body, allowing it to pop down to ground level
Hunter’s famous patented female-thread and it places water in an umbrella pattern like a
Adjustable Arc nozzles quickly became a bubbler. The result is no more unsightly risers
popular item for SRS spray head users. Now, sticking up out of the landscape. Because its
Hunter is proud to offer another soon-to-be ability to remain out of sight reduces vandalism
favorite–a collection of new female-thread and liability, the PCN is your best choice for
Fixed Arc nozzles. traditional bubbler applications.
While the Adjustable Arc nozzles are fully With its many body options of various
adjustable from 25-360 degrees, the Fixed Arc pop-up heights and nozzle selections, the SRS
nozzles are factory set at a quarter, half, or spray line is complete providing solutions to
full circle pattern. As with the adjustable arc every landscape spray head application.
nozzles, the fixed arc nozzles are color-coded
in brown, red, green, black, and gray for fast
and easy identification. They are also available
in radius ranges of 8', 10', 12', 15', and 17',
(2.4 m, 3.0 m, 3.7 m, 4.6 m, 5.2 m) which can
be reduced if needed for fine-tuning.
6
Spray Nozzles
Adjusted To:
7
®
PRODUCT COMPARISONS
Hunter ® Toro ® Rain-Bird ®
FEATURES - Adjustable Arc Nozzle ADJ V-15 VAN
Popular Female Threaded Nozzle � �
Arc adjustable without using tools � �
Multiple Radius Ranges available � �
Matched Precipitation across radius ranges �
Filter screen included � � �
8
Spray Nozzles
PRODUCT PERFORMANCE
®
Pro-Spray Nozzles Performance Data
8 Foot Radius 10 Foot Radius 12 Foot Radius 15 Foot Radius 17 Foot Radius
Fixed (Quarter, Half, Full) Nozzle Fixed (Quarter, Half, Full) Nozzle Fixed (Quarter, Half, Full) Nozzle Fixed (Quarter, Half, Full) Nozzle Fixed (Quarter) Nozzle
Trajectory: 0° Trajectory: 15° Trajectory: 28° Trajectory: 28° Trajectory: 28°
Color Code: Brown 8 Color Code: Red 10 Color Code: Green 12 Color Code: Black 15 Color Code: Gray 17
Pressure Radius Flow Precip in/hr Radius Flow Precip in/hr Radius Flow Precip in/hr Radius Flow Precip in/hr Radius Flow Precip in/hr
Arc PSI Pattern ft. GPM ft. GPM ft. GPM ft. GPM ft. GPM
20 7' 0.17 1.34 1.54 9' 0.30 1.43 1.65 11' 0.50 1.59 1.84 14' 0.77 1.51 1.75 16' 0.97 1.46 1.68
90° 25 8' 0.19 1.14 1.32 10' 0.33 1.27 1.47 12' 0.55 1.47 1.70 15' 0.86 1.47 1.70 17' 1.13 1.51 1.74
30
35
Q 8'
9'
0.24
0.33
1.44
1.57
1.67
1.81
10'
11'
0.39
0.49
1.50
1.56
1.73
1.80
12'
13'
0.63
0.73
1.68
1.66
1.95
1.92
15'
16'
0.93
1.03
1.59
1.55
1.84
1.79
17'
18'
1.20
1.25
1.60 1.85
1.49 1.72
40 10' 0.48 1.85 2.13 12' 0.63 1.68 1.95 14' 0.84 1.65 1.91 17' 1.13 1.51 1.74 19' 1.38 1.47 1.70
20 7' 0.34 1.34 1.54 9' 0.60 1.43 1.65 11' 1.00 1.59 1.84 14' 1.54 1.51 1.75 16' 1.94 1.46 1.68
180° 25 8' 0.38 1.14 1.32 10' 0.66 1.27 1.47 12' 1.10 1.47 1.70 15' 1.72 1.47 1.70 17' 2.26 1.51 1.74
30
35
H 8'
9'
0.48
0.66
1.44
1.57
1.67
1.81
10'
11'
0.82
0.98
1.58
1.56
1.82
1.80
12'
13'
1.31
1.46
1.75
1.66
2.02
1.92
15'
16'
1.86
2.06
1.59
1.55
1.84
1.79
17'
18'
2.40
2.50
1.60 1.85
1.49 1.72
40 10' 0.96 1.85 2.13 12' 1.26 1.68 1.95 14' 1.68 1.65 1.91 17' 2.26 1.51 1.74 19' 2.76 1.47 1.70
20 7' 0.68 1.34 1.54 9' 1.20 1.43 1.65 11' 2.00 1.59 1.84 14' 3.08 1.51 1.75
360° 25 8' 0.76 1.14 1.32 10' 1.32 1.27 1.47 12' 2.20 1.47 1.70 15' 3.44 1.47 1.70
30
35
F 8'
9'
0.95
1.32
1.43
1.57
1.65
1.81
10'
11'
1.62
1.96
1.56
1.56
1.80
1.80
12'
13'
2.65
2.92
1.77
1.66
2.05
1.92
15'
16'
3.72
4.12
1.59
1.55
1.84
1.79
40 10' 1.92 1.85 2.13 12' 2.52 1.68 1.95 14' 3.36 1.65 1.91 17' 4.54 1.51 1.74
Note: The Institutional Spray’s built-in pressure regulation controls output to a maximum of 30 PSI. All preciptation rates calculated for 360 degree operation.
9
®
PRODUCT PERFORMANCE
Strip Pattern Nozzle Performance Data Model S-16A Stream Spray Nozzle
Color Code: Blue
Performance Data
Nozzle Pressure Width Flow Precip Adjustable from 25° to 360°
Model PSI x Length GPM in/hr Color Code: Blue
20 4' x 14' 0.55 0.95 Pressure Radius Flow Precip in/hr
LCS-515 25 5' x 15' 0.60 0.77 Arc PSI ft. GPM
30 5' x 15' 0.65 0.83 20 15 0.40 0.68 0.79
Left-Corner 90°
Strip 35 5' x 15' 0.70 0.90 25 16 0.46 0.69 0.80
40 5' x 15' 0.75 0.96 30 16 0.50 0.75 0.87
20 4' x 14' 0.55 0.95 35 17 0.54 0.72 0.83
RCS-515 25 5' x 15' 0.60 0.77 40 18 0.57 0.68 0.78
30 5' x 15' 0.65 0.83 20 15 0.67 0.57 0.66
Right-Corner 180°
Strip 35 5' x 15' 0.70 0.90 25 16 0.80 0.60 0.69
40 5' x 15' 0.75 0.96 30 16 0.88 0.66 0.76
20 4' x 28' 1.10 0.95 35 17 0.97 0.65 0.75
SS-530 25 5' x 30' 1.20 0.77 40 18 1.04 0.62 0.71
30 5' x 30' 1.30 0.83 20 15 1.19 0.51 0.59
Side Strip 35 5' x 30' 1.40 0.90 360° 25 16 1.46 0.55 0.63
40 5' x 30' 1.50 0.96 30 16 1.66 0.62 0.72
35 17 1.82 0.61 0.70
40 18 1.99 0.59 0.68
10
Spray Nozzles
Strip Pattern Nozzle Performance Data – Metric Model S-16A Stream Spray Nozzle
Color Code: Blue
Performance Data – Metric
Nozzle Pressure Width Flow Precip Adjustable from 25° to 360°
Model Bars kPa x Length m3/hr l/min mm/hr Color Code: Blue
1.4 137 1.2 m x 4.3 m 0.12 2.1 24 Pressure Radius Flow Precip mm/hr
LCS-515 1.7 172 1.5 m x 4.6 m 0.14 2.3 20 Arc Bars kPa m m3/hr l/min
2.1 206 1.5 m x 4.6 m 0.15 2.5 21 1.4 138 4.6 0.09 1.5 17 20
Left-Corner 90°
Strip 2.4 241 1.5 m x 4.6 m 0.16 2.6 23 1.7 172 4.9 0.10 1.7 18 20
2.8 275 1.5 m x 4.6 m 0.17 2.8 24 2.1 207 4.9 0.11 1.9 19 22
1.4 137 1.2 m x 4.3 m 0.12 2.1 24 2.4 241 5.2 0.12 2.0 18 21
RCS-515 1.7 172 1.5 m x 4.6 m 0.14 2.3 20 2.8 276 5.5 0.13 2.2 17 20
2.1 206 1.5 m x 4.6 m 0.15 2.5 21 1.4 138 4.6 0.15 2.5 15 17
Right-Corner 180°
Strip 2.4 241 1.5 m x 4.6 m 0.16 2.6 23 1.7 172 4.9 0.18 3.0 15 18
2.8 275 1.5 m x 4.6 m 0.17 2.8 24 2.1 207 4.9 0.20 3.3 17 19
1.4 137 1.2 m x 8.5 m 0.25 4.2 24 2.4 241 5.2 0.21 3.7 16 19
SS-530 1.7 172 1.5 m x 9.1 m 0.27 4.5 20 2.8 276 5.5 0.24 3.9 16 18
2.1 206 1.5 m x 9.1 m 0.30 4.9 21 1.4 138 4.6 0.27 4.5 13 15
Side Strip 2.4 241 1.5 m x 9.1 m 0.32 5.3 23 360° 1.7 172 4.9 0.33 5.5 14 16
2.8 275 1.5 m x 9.1 m 0.34 5.7 24 2.1 207 4.9 0.38 6.3 16 18
2.4 241 5.2 0.41 6.9 15 18
2.8 276 5.5 0.45 7.5 15 17
11
®
Radius Adjustment
Hold the nozzle arc stationary
with fingers, or with two pins on
the side of the Hunter wrench
between any of the nozzle spokes.
Then, adjust the radius with a
flat-bladed screwdriver by turning
the center screw clockwise.
The radius should not be reduced more than
25%. The nozzles are preset at the factory for
maximum radius.
12
Bubbler Nozzles
PCN Nozzle & PCB Performance Data PCN Nozzle & PCB Performance Data – Metric
Pressure Flow Pattern Pressure Flow Pattern
Model PSI GPM Type Model Bars kPa m3/hr l/min Type
25 30 0.25 Trickle 25 2.1 206 0.06 0.9 Trickle
50 30 0.50 Trickle 50 2.1 206 0.11 1.9 Trickle
10 30 1.00 Umbrella 10 2.1 206 0.23 3.8 Pattern
20 30 2.00 Umbrella 20 2.1 206 0.45 7.6 Pattern
Note: Typical spacing 1 to 3 ft. Note: Typical spacing 0.3 to 0.9 m.
13
®
14
PS Spray Sprinklers
Hunter PS spray sprinkler puts the water THE PS SPRINKLERS ARE ADJUSTABLE FROM 1˚ to 360˚
15
®
PRODUCT PERFORMANCE
Model 5SS
20
25
4' x 28'
5' x 30'
1.1
1.2
0.95
0.77 by 30 feet long.
Side Strip 30 5' x 30' 1.3 0.83
35 5' x 32' 1.4 0.84 • Triangular, head-to-head spacing is recommended.
40 5' x 33' 1.5 0.90
16
PS Spray Sprinklers
17
®
PRODUCT COMPARISON
SPECIFICATION GUIDE
EXAMPLE: PS - 04 - (15) - A
MODEL POP-UP HEIGHT RADIUS PATTERN
PS 00 = Shrub (10) = 10' A = Adjustable
02 = 2" Pop-up (12) = 12' S = Side Strip
04 = 4" Pop-up (15) = 15'
(17) = 17'
(5S) = Side Strip
TECHNICAL INFORMATION
MODELS
PS-00 – Shrub
PS-02 – 2" Pop-up (5 cm)
PS-04 – 4" Pop-up (10 cm)
DIMENSIONS
• Overall height:
PS-00 – 4 ½" (11 cm)
PS-02 – 4 ½" (11 cm)
PS-04 – 6 ½" (16 cm)
• ½" female inlet NPT
• Exposed diameter: 1 ¼" (3 cm)
OPERATING SPECIFICATIONS
18
PS Spray Sprinklers
INSTALLATION AND MAINTENANCE
Arc Adjustment
The sprinklers come from the factory with
a preset spray arc of 1˚ (a very thin stream).
Ratcheting Riser
The raised dot on top of the nozzle indicates
the adjustable (left) edge of the spray pattern.
With the raised dot aligned to the right-hand
border of the coverage area, insert the hex
end of the Hunter wrench into the stainless-
steel hex screw and turn the screw counter-
clockwise to increase the arc. The nozzle turns
with the screw, and both the arc of coverage
and the discharge rate are increased. Do not Adjusting Arc
use the Hunter wrench sideways in the spokes
to adjust the arc. The flow will not adjust pro-
portionately to the arc.
Adjusting Radius
INCORRECT WAY
TO ADJUST ARC
19
®
INSTALLATION DETAILS
FINISH GRADE
MODEL PS-00
SPRAY HEAD
MODEL PS-04
SPRAY HEAD
R
MODEL HC-50F-50m
FINISH GRADE
1/2" STREET ELL
1/2" PVC RISER
(LENGTH AS REQUIRED) PVC TEE
PVC TEE
PVC LATERAL LINE
PS-00. PS-04SJ.
FINISH GRADE
MODEL PS-04
SPRAY HEAD
1/2" STREET ELL
POLY ELL
POLY PIPE
(LENGTH AS REQUIRED)
POLY ELL
PVC TEE
PS-04
®
PSPOLY.
20
®
Hunter Industries Incorporated • The Irrigation Innovators © 2006 Hunter Industries Incorporated
1940 Diamond Street • San Marcos, California 92078 • TEL: (1) 760-744-5240 • FAX: (1) 760-744-7461
www.HunterIndustries.com LIT-212.PDF 1/06