Beruflich Dokumente
Kultur Dokumente
Output Ratings
Generating Set Model PG620B1
Baseload*
380-415V, 50 Hz 620 kVA
496 kW
* Refer to ratings definitions on page 4.
Ratings at 0.8 pf
Technical Data
Engine Make & Model 4008-30TRS2
Alternator Model LL7024L
Base Frame Type Heavy Duty Fabricated Steel
Circuit Breaker Type/Rating Optional
Frequency 50 Hz
Engine Speed RPM 1500
Fuel Consumption m3/hr (cfh) 136 (4782) Photo for illustrative purposes only
abcde
Northern Ireland • Brazil • China • India • USA
With headquarters in Northern Ireland, FG Wilson operates through a Global Dealer
Network. To contact your local Sales Office please visit the FG Wilson website at
www.FGWilson.com
PG620B1
Engine Speed: rpm 1500 Radiator Fan Load: kW (hp) 24.8 (33.5)
Gross Engine Power: kW (hp) 526 (705) Lubrication System
BMEP: kPa (psi) 1370 (198) Oil Filter Type: Spin-On, Full Flow
Recommended Fuel: Natural gas with lower Exhaust System
calorific value of 34.7
MJ/m³ and minimum Max. Allowable Back
Pressure: kPa (in Hg) 3.9 (1.15)
methane number of 75
Exhaust Gas Flow: m3/min (cfm) 105 (3708)
Fuel Consumption m3/min (cfm) Heat Rejection to Exhaust
System: kW (Btu/min) 402 (22873)
100%
Load Exhuast Temperature: ˚C (˚F) 485 (905)
136 (4782)
2
Alternator Performance Data
50 Hz
Data Item
415/240 400/230 380/220
Winding Pitch (Code): 2/3 (No.6) Total Harmonic Content LL/LN: <4%
Suppression is in line with European
Wires: 12 Radio Interference: Standard EN61000
3
PG620B1
Technical Data
3 Phase Ratings and Performance at 50 Hz, 1500 RPM
Model: PG620B1
Voltage Baseload
kVA kW
415/240 620 496
400/230 620 496
380/220 620 496
Definitions
Baseload (Continuous) Rating Standard Reference Conditions
These ratings are applicable for supplying Note: Standard reference conditions 25˚C
continuous electrical power for full load (77˚F) Air Inlet Temp, 100m (328ft) A.S.L.
operations. There is no overload available. 30% relative humidity. All engine performance
The ratings represent the engine performance data based on the above mentioned maximum
in accordance with ISO 3046 at continuous ratings. Fuel consumption data at
reference conditions equivalent to those full load using gas fuel with a lower calorific
specified in ISO 3046/1 based on the use of value of 34.71MJ/m3
natural gas having a lower calorific value of
34.71MJ/m3
General Data
Documents Generating Set Standards Warranty
A full set of operation and maintenance The equipment meets the following standards: All equipment carries full manufacturer's
manuals and circuit wiring diagrams. BS5000, ISO 8528, ISO 3046, IEC 60034, warranty. Extended warranty terms available.
NEMA MG-1.22. For details on warranty cover please contact
your local dealer, or visit our website:
FG Wilson is a fully accredited ISO 9001 www.FGWilson.com
company.
In line with our policy of continuous development, we reserve the right to change specification without notice. PG620B1/0309/GB