Beruflich Dokumente
Kultur Dokumente
ERD97P21-U Receiver
RS-422, PELCO P PROTOCOL RECEIVER
Product Features
• Easy to Install
• Standard Features Include:
– 80 Presets
– Frame Scan
– Random Scan
• RS-422, Pelco P Protocol for Pan/Tilts, Including Legacy ®
• Environmental Housing Meets NEMA Type 4X Standards
• Input Power, Pan/Tilt Power, and Camera Power Selectable using
Tool-Less Plug-Ins
• Adjustable Lens Voltage
• LED Indicators for Power and Transmit/Receive Data
• Standard Single Alarm Input (9 with Option Board)
• Standard Single Alarm Output (9 Auxiliary Outputs with Option Board)
• Auxiliary Outputs Jumper-Selectable for Normally-Open or
Normally-Closed Operation
• Address Selectable
• Data Rate Selectable
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
MODEL GENERAL
ERD97P21-U Receiver that provides interface with pan/tilt Operating Temperature 14° to 122°F (-10° to 50°C)
devices that transmit Pelco P protocol and use Dimensions 9.44" W x 4.32" H x 11.62" D
24/120/230 VAC. Supports up to 80 presets; (23.98 x 10.97 x 29.51 cm)
has one relay output. Unit Weight 12 lb (5.43 kg)
Shipping Weight 13 lb (5.89 kg)
RELATED PRODUCT
ERD97P-AUX Alarm/relay option board
CERTIFICATIONS/RATINGS
• Meets NEMA Type 4X standards
ELECTRICAL
Input Voltage 24 VAC, 120 VAC, or 230 VAC, 50/60 Hz
(selectable)
Pan/Tilt Output Voltage 24 VAC (2A maximum), 120 VAC or 230 VAC
(selectable); no voltage step-up possible;
230 VAC input cannot step down to 120 VAC
Lens Output Voltage 5 to 10 VDC; 25 mA at 10 VDC and 100 mA at
9 VDC
Camera Voltage 24 VAC (0.5 mA), 120 VAC or 230 VAC
(selectable); no voltage step-up possible;
230 VAC input cannot step down to 120 VAC
Enclosure Voltage Follows input voltage to receiver, fused
Power Consumption
Pan/Tilt 48 VA
Camera 12 VA
Lens 5 VA
Receiver 15 VA
Control Method RS-422 compatible (at 1200, 2400, 4800,
9600 baud). Receiver address and baud rate
DIP switch selectable
Operating Distance 5,000 ft (1.5 km) on 18 AWG wire (Belden 8760)
Fuse Protection
Receiver Input Power 3 AG type;
24 VAC, 5 ASB
120 VAC, 2 ASB
230 VAC, 1 ASB
Camera Power 3 AG type;
24 VAC, 1 A
120 VAC, 0.2 A
230 VAC, 0.0625 A
Enclosure Power 3 AG type;
Fuse values depend on specifications of the
equipment/accessories installed in enclosure.
Check equipment specifications to determine
fuse values
Alarm Inputs Main motherboard has 1 normally-open alarm
input (2 contacts: 1 in, 1 common).
Option board has 8 additional normally-open
alarm inputs (9 contacts: 8 in, 1 common).
Contact rating: 1 A at 24 VDC, 0.5 A at 120 VAC
Relay Outputs Main motherboard has 1 relay output.
Option board has 8 additional relay outputs
that are under receiver control.
Contact rating: 1 A at 24 VDC, 0.5 A at 120 VAC
LED Indicators Power, TX data, RX data