Sie sind auf Seite 1von 5

SAMPLE QUESTIONS ON RICOCHET REORDERS.

Multiple Choices (Tick the most appropriate answer)

1.. Which of the following is the common Component of all application in


Ricochet system?

a. Component Viewer.
b. Alarm client.
c. Audio Digitizer.
d. Both a & b.

2. Which one of the following is not a dispatcher?

a. Radar data.
b. CCTV.
c. Audio Digitizer.
d. None of the above.

3. Ricochet Server runs

a. Windows XP.
b. Window 2003.
c. DOS.
d. Both a & b.

4. The Default IP address of ARM_m server is

a. 10.0.0.122
b. 10.0.122
c. 10.0.0.121
d. 10.0.121

5. In Data folder under Log folder, files are created at the Interval of every

a. 10 Minutes.
b. 5 Minutes
c. 15 Minutes.
d. 60 Minutes.

6 . Ricochet Line Unit is

a. The interface module for analogue input lines


b. That Interconnects both servers.
c. Monitoring the lines
d. None of the above.
Descriptive Questions.

1. List out the functions of Disk Manager and RLU in the Ricochet recorder
(4)

2. What are the functions of Alarm Manager in the Ricochet recorder? (2)

3. State the functions of Digitiser in the Ricochet recorder. (2)

4. What is the purpose of Ricochet Management Console. (4)

5. Name the four sections of Ricochet Web services. (2)

6. What are Dispatcher w.r.t Ricochet recorder? (2)

7. Name the different servers in Ricochet Recorder. (3)

8. Draw the System Architecture of Ricochet Recorder (5)

9. How will you create a Wave Folder and what is its use. (4)

State True or False. And Give the correct statement where ever needed.
Each caries TWO Marks.

1. If the recording is normal, GREEN LEDs on the RLU glow permanently.

2. The Administrative Tools are available in the Record Manager of the Ricochet

3. The replay Manager reads the recorded data and provides it to the replay
clients over LAN.

4. In Ricochet the LAN is mainly used for networking the servers.

5. If the connection between the server and Ethernet switch is open , the
recording will not be affected.

6. In RLU the input impedance is 600 ohms.

7. Each RJ45 socket in the RLU can handle 8 input lines.

8. As per DGCA the recorded data are to be preserved for 30 days only.
9. Alarms can be acknowledged from the web services of Ricochet only.

10. Default IP address of ARM-s is 10.0.0.121

11, Replaying from c;| Log and Wave Folder are the same.

SAMPLE QUESTION ON VCCS (FREQUENTIS)

1. VCS 3020X is a
a) Data Switch
b) Voice Switch
c) Both a& b

2. VCS 3020 X Switch is


a) Fully Digital
b) fully Analog
c) Digital and Analog

3. What is the main advantage of VCS


a) non blocking capability
b) Expandability
c) switching time
d) steady condition

4. Which Protocol is used for data communication between components of VCS 3020 X
a) TCP IP
b) HDLC
c) PPP
d) SDLC

5. What is the main board for voice switching


a) SRO
b) HDLC
c) JIF
d) GPIF

6. VCS 3020 X is duplicated system. In normal operation there is a voice


a) in both system Halves (parallel operation)
b) Only in one system Half (Main / S Bi operation)

7. In case of one component of the system fails the correspondent duplicated components
a) will take over immediately
b) has to startup before it can takeover
8. For transmitting control data from JIF to HDLC the following line is used
a) PCN 30
b) SBUS
c) RS 485
d) IOM2

9. For transmitting control data from EPOS to JIF the following is used
a) PCN 30
b) SBUS
c) RS 485
d) IOM2
10. How many clock boards are in the 3020 X system
a) 2
b) 3
c) 6

11.Which types of boards can be connected to GPIF


a) . EPOS
b) HDLC
c) LIF ,RIF
d) ALIF

12. How many telephone or Radio Interfaces fit in one interface rack?
a) four
b) eight
c) ten
d) sixteen

13. How are the interfaces LIF and RIF and the SALI connected to the GPIF
a) IOM2 BUS
b) PCM30
c) SBUS
d) RS485
e) PCM64

14. Is the TMCS essential for the operation of the VCS 3020X
a) Yes. If the TMCS fails, TCS is not operation
b) No, It is used for the configuration of the VCS only, Can be switched off if not
needed
c) No, but since it is continuously monitoring VCS it must be turned on to be able
to record and report the system status
15. Which operating system does the TMCS use
a) Windows NT
b) OS 2
c) LINUX
d) UNIX

16. In case of the TMCS power problem are the communication inside the VCS is
affected
a) Yes
b) No

17 . Maximum PCM 30 Cable length must not exceed

a) 100 M b) 500M c) 1000M d) 1500 M

18, One Radio Interface Card (RAIF) supports


a) One Radio Equipment b) Two Radio Equipment c) Three Radio Equipment
d) configurable to any no.

Das könnte Ihnen auch gefallen