Sie sind auf Seite 1von 53

L E C ATA LO G U E

THE CATALOGUE
CONTENTS
ALUMINIUM SOLUTIONS FOR THE
SLIDING SYSTEMS WHOLE WORLD
LUMEAL 12
GALENE 14
SOLEAL 16
SOLEAL 90° ANGLE 18
TOPAZE 20
TOPAZE + 22
REFERENCES 24

WINDOWS AND PATIO DOORS


SOLEAL 55 MINIMAL 28
SOLEAL 55 VISIBLE 30
SOLEAL 65 MINIMAL 32
SOLEAL 65 VISIBLE 34
TOPAZE 36
SAFETYLINE 38
REFERENCES 40

DOORS
AMBIAL 44
SOLEAL 46
TITANE 48
TOPAZE 50
REFERENCES 52

FAÇADES
GEODE VISIBLE GRID 56
GEODE TRAME 58
GEODE BEADED GLAZING 60
GEODE EXTERNAL GLASS 62
GEODE GLASS ROOF 64
REFERENCES 66

SOLAR PROTECTION AND BALUSTRADING


NOTEAL 70
SUNEAL 72
GYPSE DOUBLE POST 74
GYPSE SINGLE POST 76
REFERENCES 78

SECURITY
COBALT 82

OFFICE AND SHOP FITTINGS


TECHNAL SYSTEM 86
OPALE 88
OFFICE AND SHOP FITTINGS 90
REFERENCES 92
Photographer: Philippe Ruault

HANDLES 94

TECHNAL THROUGHOUT THE WORLD 96

Within the international community of architects and fabricators,


Technal has gradually established itself as the point of
reference for aluminium joinery.
Architect: Éric Lenoir Architecte

The company’s path over the last 55 years has demonstrated


its boundless design culture, technical excellence and quality
requirements.
A BRAND DRIVEN MARKET PRESENCE ACROSS MANY DIFFERENT SECTORS
BY INNOVATION
Technal’s Test Centre in Toulouse (France) is like no other
anywhere else in the world in the field of aluminium
joinery. It's here that all kinds of preliminary studies are
carried out during the prototype stage, as well as multiple
tests on finished products, including a wide range of
benchmark tests: mechanical strength, opening-closing,
manoeuvrability, shocks, thermal resistance, resistance
to corrosion, weather resistance (air permeability, water
tightness, wind resistance), etc.
This Test Centre produces a wealth of information which is
then shared and distributed worldwide in accordance with
national standards and regulations to be able to provide
each market with high quality products that exceed the PRIVATE RESIDENTIAL RENOVATION COLLECTIVE HOUSING
strictest regulatory requirements. Architect: Koffi and Diabaté Group Architects: Guillermo García Architects: Alba-Beyrouth
Photographer: DR Technal Photographer: Andres Negroni Photographer: DR Technal

DESIGN THAT SETS US APART TOURISM, LEISURE EDUCATION AND CULTURE HEATH AND WELL-BEING
AND TRANSPORT Architects: Nelly Breton and Olivier Fraisse Architects: Carlos Ferrater and Alfonso Casares
(Terreneuve) Photographer: Joan Guillamat
Technal design goes beyond mere aesthetics. It is a Architect: Moshe Safdie Photographer: Daniel Rousselot
Photographer: Timothy Hursley
compendium of functionality, respect for the environment,
ergonomics, energy saving, integration with the surroundings
and, last but not least, a healthy dose of uniqueness.
What’s more, special attention is paid to the use of colour,
with the combination of exclusive colour lines and traditional
collections, the offer of various finishes (anodised, powder
coated, textural effects, etc.) and the development of
innovative processes such as bi-colouration which allows two
different colours to be used on the same profile, one on the
inside and one on the outside.
Finally, the wide variety of handles and accessories offers all
the flexibility you could ever wish for to ensure their perfect
integration with all architectural styles.

OFFICES AND SHOPS


Architects: Ateliers Jean Nouvel and François Fontès Architecture
Architect: Esteban Y Tan & Associates
Photographer: Luc Boegly
Photographer: DR Technal
TECHNAL, THE BRAND
OF CHOICE FOR ARCHITECTS

In addition to its 50 years of experience in Our showroom:


creating innovative solutions for aluminium A backdrop for our products
windows, doors and façades, Technal has also More than just a place for displaying products
gained experience on five continents where and innovations, this showcase fits seamlessly
it operates. This legacy has allowed it to work into the site thanks to its minimalist design. The
with a large number of architects, some well- dialogue with architects and specifiers focusses
known, others emerging, which has resulted in on the multitude of innovations and exclusive
the acquisition of a global vision that knows no concepts available:
bounds, enabling it to provide effective solutions the latest sliding systems, windows, doors, solar
to the most complex architectural issues. protection systems, etc.

WIDE SELECTION A COMPREHENSIVE RANGE


OF COLOURS FOR ALL YOUR PROJECTS
Technal offers a wide range of colours which enhance Technal offers a wide variety of different
the appearance of the aluminium by playing with solutions to create a dialogue between
surface and lighting effects: the interior and the exterior of buildings
and to design façades that revolve around
- The Exclusives: a Classic collection with seven
large glazed surfaces. For all markets from
traditional shades and the new Downtown collection
construction to residential, from new builds
with eight exclusive colours.
to renovations. Curtain walling, windows and
- The Basics: Selection, Standard and Wooden
doors are available in many different versions
Decoration.
and thus offer appropriate solutions to the
TECHNAL also offers the possibility of having two-
different needs expressed by the industry’s
tone joinery, a process which allows you to have two
professionals.
different colours on the same profile, one on the
inside, the other on the outside.
The Qualicoat, Qualanod, Qualimarine and
Qualidéco approved colour ranges guarantee the
longevity of our products.
A CUSTOMISED SOLUTION A COMPREHENSIVE RANGE
AND PROJECT OF SOFTWARE DEVELOPED
GUIDANCE FOR ALUMINIUM
PROFESSIONALS
The design and technical support teams are
based on site so that they can work closely with This software is supplied ready to use and with
architects and fabricators to produce high quality a comprehensive database of products from the
installations for all types of buildings, and also TECHNAL range.
develop unique profiles.
Tech3D Façade: 3D modelling.
TechDesign: quotes, joinery output,
Technal has the resources to fulfil the
orders for suppliers, manufacturing
requirements of each and every project through
records.
tailor-made designs: for specific applications,
performance enhancements and innovations.
In order to build faster and better, we must
modify our methods and move from sequential
Support for architects:
to collaborative work flows. Through digital 3D
Engineering service
modelling, or BIM, which has gradually taken
Structural and thermal calculations root in the world of building, it is possible to
Costing create a unique evolving project. It centralises
CAD information and pools resources and offers
Weather resistance tests in our genuine time savings for stakeholders,
ITC test centre industrialists, installation companies, clients and
project managers. In anticipation of regulations,
TECHNAL offers TECH3D, an exclusive BIM
software dedicated to specifiers.

A HIGH QUALITY
TRAINING CENTRE
Our training centre has built its strategy and
training programmes on a strong conviction:
the success of any business depends on the
ability of its staff to adapt to change (technical,
regulatory, IT, etc.), to increase its productivity
and to constantly improve the quality of the
services offered to its clients.
HIGH-LEVEL INDUSTRIAL AND
LOGISTICS SERVICES
The training programme offered by TECHNAL ACROSS PRODUCTION SITES FROM
is based on a constant and comprehensive
assessment of clients' needs and expectations. EXTRUSION TO DISTRIBUTION
It has been developed by professionals for
professionals and is fully operational.
Architects: Juan Carlos Sancho and Sol Madridejos Photographer: Juan Carlos Sancho

SLIDING SYSTEMS
LUMEAL · GALENE · SOLEAL · TOPAZE
SLIDING SYSTEMS

LUMEAL, the minimal sliding system with a


concealed opening frame: where design meets
performance
PRODUCT BENEFITS
Discreet aluminium frame with a visible 38 mm
and 77 mm central aluminium stile
Large sizes up to W 5.30 m x H 2.70 m available
for 2-leaf patio doors
Concealed drainage in all configurations
Threshold adapted for disabled persons
Enhanced security: RC3 resistance class
according to European standard EN 1627-30 38

Motorisation (optional)
100

106
Architects: Dank Architectes Photography: DR Technal

77 77

CROSS-SECTIONS PERFORMANCE
Vertical
38
MAXIMUM DIMENSIONS Up to W 5.30 m x H 2.70 m. 2-leaf patio door on 2 tracks
68

kg MAXIMUM WEIGHT PER LEAF Up to 300 kg

Uw = 1.2 W/m2.K and Sw = 0.46 TLw = 0.65


100

THERMAL
106

Double glazing with Ug = 1.0 W/m2.K + insulating crossbar (W 4.50 m x H 2.70 m)

-35 dB (Ra, Tr)


ACOUSTIC Patio-door with 2 tracks - 1 leaf + 1 fixed light (W 2.8 m x H 2.2 m)
77 77
A4- E7A-VB3 *
Horizontal WEATHER PERFORMANCE Patio door with 1 leaf + 1 fixed light (W 3 m x H 2.50 m)
106

ACCESSIBILITY Disabled access threshold

Class 3 break-in resistance classification according to the European standard


68

SECURITY
EN 1627-30

Test results according to product standard NF 270-1

CONFIGURATIONS *(A = Air, E = Water, V = Wind)

2 tracks 3 tracks
106

FIXED LIGHT FIXED LIGHT FIXED LIGHT


FIXED LIGHT

1 leaf + 1 fixed light 2-leaf 3-leaf 4-leaf 2 leaves + fixed light 2 leaves + 2 fixed lights 3-leaf 6-leaf

12 / 13
SLIDING SYSTEMS

GALENE, the panoramic lift-and-slide system


sección vertical (A A’)

PRODUCT BENEFITS
Lift-and-slide system with a 126 mm module
Available with or without a thermal break A
130,7 mm

Various configurations possible to meet the


requirements of even the most ambitious
architectural projects (including 90° angle sliding
frames).
Large sizes up to W x H = 6.5 m x 2.5 m available
for the 2-leaf frame
2-,3- or 4-point locking systems activated by a sección vertical (A A’)
special handle (single or double)
Possibility of glazing with an integrated blind for
128,2 mm
solar protection

Architect: Mora, Sant Vicens Arquitectes Associats Photographer: Lluís Casals

130,7 mm A

CROSS-SECTIONS PERFORMANCE

MAXIMUM DIMENSIONS Up to W 6.50 m x H 2.50 m. 3-leaf patio door on 3 tracks

133,2 97,2 133,2


kg MAXIMUM WEIGHT PER LEAF Up to 300 kg

Uw = 1.6 W/m².k
THERMAL With Ug = 1.0 W/m2.K + insulating crossbar

128,2 mm
A4 E7 VC5 *
WEATHER PERFORMANCE
125,6

2-leaf patio door on 2 tracks (W 3 m x H 2.20 m)


*(A = Air, E = Water, V = Wind)

Full-access frame
single track
Horizontal cross-section, 2 tracks, 2 leaves Vertical cross-section, 2 tracks

CONFIGURATIONS
Basic frame 133,2 97,2 133,2 1-leaf 2-leaf

2 tracks 3 tracks
125,6

1 leaf + 1 fixed light 2-leaf 3 leaves with a fixed 3-leaf 4 leaves with fixed side lights 4-leaf 3-leaf 3 leaves with a fixed 6-leaf 6 leaves with fixed side lights
central light side light
14 / 15
SLIDING SYSTEMS

SOLEAL 55*, the universal sliding system


suitable for all your large-scale projects

PRODUCT BENEFITS
Many different configurations to meet the
requirements of residential and tertiary sector
projects
Multipoint locking system (from 1 to 4 points)
with a key lock option 55

Tubular or blade-shaped reinforcer with optional


decorative elements
Concealed drainage in all configurations
65

Accessibility solutions in accordance with


legislation on access for disabled persons for all
configurations

Architects: Lacaton & Vassal Photography: DR Technal


103

55
Vertical
CROSS-SECTIONS PERFORMANCE

103 33 MAXIMUM DIMENSIONS Up to W 4.30 m x H 2 .60 m. 2-leaf patio door on 2 tracks


65

kg MAXIMUM WEIGHT PER LEAF Up to 200 kg

Up to 1.4 W/m².K, Sw: 0.45 and TLw: 0.59


THERMAL Double glazing with Ug = 1.0 W/m².K + insulating crossbar (W 4.30 m x 2.60 m)
55

-35 dB (Ra, Tr)


ACOUSTIC Patio door with 2 tracks - 2 leaves (W 1.85 m x H 1.48 m)
Horizontal
A4- E6A-VB2 *
WEATHER PERFORMANCE Patio door with 2 tracks - 2 leaves (W 3 m x H 2.50 m)
103

CONFIGURATIONS ACCESSIBILITY Disabled access threshold


Basic frame
Test results according to product standard NF 270-1
2 tracks *(A = Air, E = Water, V = Wind)
103 33

Full-access frame
Single track 2 tracks 3 tracks

2-leaf Integrated composite 3 dependent leaves 3 independent leaves 4-leaf


2-leaf
55

3 tracks 4 tracks

1-leaf 2-leaf 3-leaf

3-leaf 6-leaf 4- and 8-leaf

* The SOLEAL sliding system is also available in a straight cut 65 mm module, version with a 40 mm thermal break 2-leaf 4-leaf 6-leaf
to meet high thermal requirements 16 / 17
SLIDING SYSTEMS

SOLEAL, the 90° corner sliding system for


large contemporary openings

PRODUCT BENEFITS
Basic configurations from 2 to 4 tracks
and full-access up to 3 tracks
Opening with a concave or convex angle
Large sizes available up to W 6 m x H 2.50 m per
side, on 3 tracks
Discreet corner post
Concealed drainage in all configurations
Accessibility solutions in accordance with
legislation on access for disabled persons
available for all configurations

Photography: DR Technal

CROSS-SECTIONS PERFORMANCE

33 MAXIMUM DIMENSIONS Up to W 4.30 m x H 2 .60 m. 2-leaf patio door on 2 tracks

126
118
118

126

kg MAXIMUM WEIGHT PER LEAF Up to 200 kg


Convex angle
Up to 1.4 W/m².K, Sw: 0.45 and TLw: 0.59
THERMAL Double glazing with Ug = 1.0 W/m².K + insulating crossbar (W 4.30 m x 2.60 m)

-34 dB (Ra, Tr)


ACOUSTIC Patio door with 2 tracks - 2 leaves (W 2.35 m x H 2.18 m)
Concave angle
A4- E7A-VB2*
WEATHER PERFORMANCE 2 tracks - 2 leaves with a disabled access threshold (W 3 m x H 2.5 m)

ACCESSIBILITY Disabled access threshold

Test results according to product standard NF 270-1


*(A = Air, E = Water, V = Wind)

CONFIGURATIONS
Basic frame Full-access frame

Concave angles Convex angles Concave angles Convex angles


2 tracks 3 tracks 4 tracks 2 tracks 3 tracks 4 tracks Single track 2 tracks 3 tracks Single track 2 tracks 3 tracks

2 x 2 leaves 2 x 3 leaves 2 x 4 leaves 2 x 2 leaves 2 x 3 leaves 2 x 4 leaves 2 x 1 leaves 2 x 2 leaves 2 x 3 leaves 2 x 1 leaves 2 x 2 leaves 2 x 3 leaves

18 / 19
SLIDING SYSTEMS

TOPAZE, the contemporary sliding system


that combines subtlety and simplicity

PRODUCT BENEFITS
46 mm module with no thermal break
Significant glazed area
Discreet 36 mm central stiles
Infill from 5 to 20 mm
Full range of closing mechanisms
Tested for class 5 cyclone resistance
Suitable for tropical zones
Compatible with doors and windows from the
same range

Architects: Cabinet KOFFI and DIABATE Architectes Photographer: DR Technal

CROSS-SECTIONS PERFORMANCE
Vertical

MAXIMUM DIMENSIONS Up to 2.60 m high


82

kg MAXIMUM WEIGHT PER LEAF Up to 140 kg


57

THERMAL No thermal break

39 -35 dB (Ra, Tr)


ACOUSTIC 2-leaf window W 1.47 m x H 1.48 m
Horizontal
A3- E4A-VA5 *
WEATHER PERFORMANCE Patio door with 2 cyclone-resistant leaves W 2.20 m x H 2.15 m
81

Test results in accordance with European standards in force


*(A = Air, E = Water, V = Wind)

57

CONFIGURATIONS
2 tracks 3 tracks 4 tracks Composite frames Full-access frames Integration of infills for shutters

Full-access Full-access Full-access Integration of 1-leaf Integration of 2-leaf


1-leaf 2-leaf 2- or 4-leaf with wall-mounted louver wall-mounted
2-leaf 3-leaf 4-leaf 3- or 6-leaf 4- or 8-leaf Single track Single track double tracks infills louver infills

20 / 21
SLIDING SYSTEMS

TOPAZE +, the contemporary sliding system


for large openings

PRODUCT BENEFITS
46 mm module with no thermal break
Variety of different creations with straight or
curved designs
Discreet 36 mm central stiles
Infill from 6 to 24 mm
Full range of closing mechanisms
Subjected to more than 20,000 open and close
test cycles
Suitable for tropical zones
Compatible with doors and windows from the
same range and SAFETYLINE louver window
compositions

Architects: A+A Photography: A + A

46

CROSS-SECTIONS PERFORMANCE

102 41 MAXIMUM DIMENSIONS Up to 3 m high

kg MAXIMUM WEIGHT PER LEAF Up to 200 kg

THERMAL No thermal break

-33 dB (Ra, Tr)


ACOUSTIC 2-leaf window W 1.47 m x H 1.48 m

Horizontal cross-section, 2 tracks - 2-leaf A3- EA7-VC3 *


WEATHER PERFORMANCE 2-Leaf patio door W 1.80 m x H 2.15 m
101

ACCESSIBILITY Disabled access threshold

Test results in accordance with European standards in force


*(A = Air, E = Water, V = Wind)

Vertical cross-section

CONFIGURATIONS
2 tracks 3 tracks 4 tracks Full access and exterior wall mounting

1-leaf 2-leaf 2- or 4-leaf with


Single track Single track double tracks
2-leaf 3-leaf 4-leaf 3- or 6-leaf 4- or 8-leaf

22 / 23
SLIDING SYSTEMS

REFERENCES

SINGLE-FAMILY HOME, Lalbenque (France) HOTEL QUEMADO, Al Hoceima (Morocco)


Architect: Franck Martinez  Client: Private  Technal-approved aluminium frame maker: Semis Miroiterie Architectural practice: Patrick Genard
Technal solutions used: LUMEAL sliding systems with concealed opening frames Technal solutions used: SOLEAL sliding systems Photographer: Patrick Genard
Photographer: Franck Martinez

SINGLE-FAMILY HOME, FACULTY OF SCIENCE AND EDUCATION, Seville (Spain)


Architect: Isasi & Pieltáin Arquitectos Client: Private Architectural practice: Cruz y Ortiz Arquitectos Client: Universidad de Sevilla
Technal solutions used: GALENE sliding systems Photographer: Ambassador Technal-approved aluminium frame maker: Rubio Gámez SL Technal solutions used: TOPAZE sliding systems
Photographer: Pedro Pegenaute

24 / 25
WINDOWS AND PATIO DOORS
SOLEAL 55 · SOLEAL 65 · TOPAZE · SAFETYLINE
Photographer: Fred Laures
Architects: Giovanni Pace Architecte
WINDOWS AND PATIO DOORS

SOLEAL 55 Minimal, the universal window


that highlights the finer points of designs

PRODUCT BENEFITS
Discreet profiles, 52 mm circumference and 66
mm central post
3 attractive designs: Contemporary, Classic or
Traditional
Clip-on-trim to tastefully highlight the opening
frame
"Equilibre" version: harmonious balance between
the mullions and transoms
24 to 32 mm infill for the opening section and 6 to
42 mm for the fixed section
Concealed drainage in frames and composite
assemblies
Compatible with the range’s sliding systems and
doors
Architects: W-Architectures (Voinchet & Architectes Associés) Photographer: DR Technal

CROSS-SECTIONS Vertical
PERFORMANCE

69
47 22 MAXIMUM DIMENSIONS Up to W 1 m x H 2.50 m
13

kg MAXIMUM WEIGHT PER LEAF Up to 130 kg


18

Uw up to 1.4 W/m².°K, Sw =0.43 and TLw = 0.57


73

THERMAL with with triple glazing (Ug = 0 + warm edge) (W 1.25 x H 1.48 m)
55

-38 dB (Ra, Tr)


ACOUSTIC 1-leaf tilt and turn Minimal opening Frame
52
Horizontal
69 A4- E9A-VC3*
47 22
WEATHER PERFORMANCE 1-leaf tilt and turn window (W 1.20 m x H 1.60 m)
13

ACCESSIBILITY Patio door with disabled access threshold


18

Test results according to product standard NF 270-1


73

*(A = Air, E = Water, V = Wind)


55

CONFIGURATIONS 52

Open-in

Fixed Bottom- 1-leaf 2-leaf Tilt and turn Tilt and turn frame/
frame hung frame/Turn and Turn and tilt frame
frame tilt frame 2-leaf Composite frame
1-leaf Open-in window with
fixed light 28 / 29
WINDOWS AND PATIO DOORS

SOLEAL 55 Visible sash, the universal


window suitable for all styles

PRODUCT BENEFITS
Wide selection of configurations to better meet
the needs of each project
3 attractive open-out designs:
Contemporary: straight and minimalist
Classic: curved and round
Traditional: with moulding for greater authenticity
3 open-in styles to customise the joinery
Clip-on flashing for all 3 styles
Concealed drainage on the frames and
composite assemblies

Architects: Agence Architecture Séquences Photographer: DR Technal

Vertical
CROSS-SECTIONS PERFORMANCE

87.5 MAXIMUM DIMENSIONS Up to W 1 m x H 2.5 m


22 43.5 22
87.5
10

22 43.5 22
10

kg MAXIMUM WEIGHT PER LEAF Up to 130 kg

Uw up to 1.2 W/m².°K, Sw =0.39 and TLw = 0.54


THERMAL with triple glazing (Ug = 0.6 + warm edge) (W 1.25 x H 1.48 m)
65
55

65
55

-40 dB (Ra, Tr)


ACOUSTIC 1-leaf tilt and turn window
16 6
Horizontal 16 52 6 A4- E9A-VC3*
52 WEATHER PERFORMANCE 1-leaf tilt and turn window (W 1.20 m x H 1.60 m)

ACCESSIBILITY Patio door with disabled access threshold

Test results according to product standard NF 270-1


*(A = Air, E = Water, V = Wind)

CONFIGURATIONS

Open-in Open-out

Fixed Fixed 1-leaf 2-leaf Tilt and turn Tilt and turn frame/ Fixed Projecting Top-hung
frame frame frame/Turn and Turn and tilt frame frame window window
tilt frame 2-leaf Composite frame
1-leaf Open-in window with
fixed light 30 / 31
WINDOWS AND PATIO DOORS

SOLEAL 65 Minimal, the universal high-


performance window offering sleek design

PRODUCT BENEFITS
65 mm module and 30 mm polyamide strip
Minimal open-in frame
Discreet profiles, 52 mm circumference and 66
mm central hinge
Clip-on-trim to tastefully highlight the opening
frame
Concealed drainage on frames and transoms
Infill:
From 24 to 42 mm on the opening frame
From 24 to 54 mm on the fixed section
Compatible with the range’s sliding systems and
doors

Architect: Manuelle Gauterand Photographer: Vincent Fillon

Vertical
CROSS-SECTIONS PERFORMANCE

MAXIMUM DIMENSIONS Up to W 1 m x H 2.70 m

kg MAXIMUM WEIGHT PER LEAF Up to 130 kg

Uw up to 1.0 W/m².°K, Sw =0.43 and TLw = 0.57


THERMAL with triple glazing (Ug = 0.6 + warm edge) 1-leaf window W 1.25 m x H 1.48 m

38 dB 1-leaf turn and tilt Minimal opening frame


ACOUSTIC 44-1SI(20) 12 (W 1.23 m x H 1.48 m)

Open-in A4- E750-VC4*


1-leaf window and patio door WEATHER PERORMANCE
1-leaf tilt and turn window

ACCESSIBILITY Patio door with disabled access threshold

Test results according to product standard NF EN 13380


*(A = Air, E = Water, V = Wind)

CONFIGURATIONS

Open-in 59

Fixed Bottom- 1-leaf 2-leaf Tilt and turn Tilt and turn frame/
frame hung frame/Turn and Turn and tilt frame
frame tilt frame 2-leaf Composite frame
1-leaf Open-in window with
fixed light 32 / 33
WINDOWS AND PATIO DOORS

SOLEAL 65 Visible sash, the universal


window for optimum performance

PRODUCT BENEFITS
65 mm module and 30 mm polyamide strip
Open-in and open-out Visible sash opening
frame
Wide selection of configurations to better meet
the needs of each project
Concealed drainage in frames and composite
assemblies
Version with concealed hardware available for
large openings with an opening frame up to
W 1.70 m x H 2.50 m
Enhanced security: RC2 resistance class
according to European standard EN 1627-30

Architects: A.D.H. Photo: DR Technal

Vertical
CROSS-SECTIONS PERFORMANCE

87 MAXIMUM DIMENSIONS Up to W 1.70 m x H 2.50 m for 1-leaf patio door

Up to 160 kg with concealed hardware


kg MAXIMUM WEIGHT PER LEAF
Up to 130 kg with standard hardware

Uw up to 0.9 W/m².°K, Sw =0.41 and TLw = 0.54 with tripe glazing


THERMAL (Ug = 0.5 + warm edge) 1-leaf window with concealed hardware W 1.25 m x H 1.48 m

-43 dB (Ra, Tr)


ACOUSTIC Test on window with 88.1/-20/-66.2 sound-proof glazing

Horizontal A4- E1050-VC4*


WEATHER PERFORMANCE
1-leaf tilt and turn window

ACCESSIBILITY Patio door with disabled access threshold

SECURITY RC2 break-in resistance class (turn and tilt - tilt and turn)
52

65 Test results according to product standard NF EN 13380


*(A = Air, E = Water, V = Wind)
CONFIGURATIONS

Open-in Open-out Special openings


51

Fixed Bottom- 1-leaf 2-leaf Tilt and turn Tilt and turn frame/ Fixed Projecting Top-hung Parallel 1-leaf 2-leaf Tilting Turning Tilt and slide
frame hung frame/Turn and Turn and tilt frame frame window window window window window
frame tilt frame 2-leaf Composite frame
1-leaf Open-in window with
fixed light 34 / 35
WINDOWS AND PATIO DOORS

TOPAZE, the contemporary window that


combines subtlety, simplicity and versatility

PRODUCT BENEFITS
46 mm module with no thermal break
3 styles of open-in frames: straight, curved or basic
Square or rounded glazing beads on the inside
Infill from 6 to 33 mm
Double sealed fixed/opening frames via an
internal/external multi-purpose gasket
Recessed casement for multipoint locks
Suitable for tropical zones
Compatible with doors and sliding systems from
142
the same range

Architects: Cruz y Ortiz Arquitectos Photographer: Pedro Pegenaute

Vertical
CROSS-SECTIONS PERFORMANCE

Up to W 1.1 m x H 2.35 m
MAXIMUM DIMENSIONS
1-leaf patio door with lock

kg MAXIMUM WEIGHT PER LEAF Up to 100 kg

142
THERMAL No thermal break
55
46

ACOUSTIC Rw (C ; Ctr) < 38 dBa (-1 ; -4) depending on the glazing

Horizontal
AIR PERMEABILITY Up to 600 Pa (class 4)

WATER TIGHTNESS Up to 1200 Pa (class 1200A)

WIND RESISTANCE Up to 2000 Pa (class 5)

Tested according to European standards EN1026 – EN1027 – EN12211

CONFIGURATIONS
87

55
46
Open-in Open-out Special opening Composite frames

1- and 2-leaf window 1- and 2-leaf patio door Bottom-hung Tilt and turn 2-leaf tilt and turn frame 1- and 2-leaf window Projecting Top-hung Tilting Turning 36 / 37
frame frame frame frame
WINDOWS AND PATIO DOORS

SAFETYLINE, the contemporary louver


window: natural ventilation and solar protection

PRODUCT BENEFITS
Ideal for new builds or renovations
Large sizes up to 1.4 m wide available with high
performance levels
Multiple compositions to choose from: fixed/
mobile louvers, aluminium/glass/combination
Integrated fly screen
Compatible with the entire TOPAZE range
Optional concealed motorisation that is
compatible with home automation systems
31
49

Architect: 2APMR Photographer Hervé Douris

MOTORISATION FEATURES Vertical glass louver


107

135

PERFORMANCE
128

31
49
Motor integrated into the standard fixed frame
A single motor can power up to 18 aluminium louvers or 12 glass
LOUVER DIMENSIONS Up to 135 mm
louvers
Possibility of using several motors
Louvers driven by cassettes MAXIMUM DIMENSIONS Up to 1.4 m wide
No need for compensation springs
107

135

Integration into a home automation system/centralised control system


128

WEATHER PERFORMANCE A2 E7B VC5 * Glass louvers (W 1 m x H 1.14 m)


Energy efficient motor (12 VDC / 10 W)
Wired or remote control173
CYCLONE RESISTANCE Class 5
Endurance tested over 30,000 cycles
Weather resistance is the same for the manual and motorised versions
ORIENTATION Up to 80°

Tested according to European standards EN1026 – EN1027 – EN12211


*(A = Air, E = Water, V = Wind)
150

173
CROSS-SECTIONS
46

CONFIGURATIONS
150

Frame with Frame with Combination Frame with Frame with


Horizontal glass louver glass louvers aluminium frame with glass monobloc fly screen and
46

louvers and aluminium window monobloc


louvers window
38 / 39
WINDOWS AND PATIO DOORS

REFERENCES

RESIDENTIAL HOUSING, Hong Kong (China)


Architectural practice: P & T Architects and Engineers LTD. Client: Manhattan Group, Hong Kong Installer: HK MB
Technal solutions used: TOPAZE windows Photographer: DR Technal

CITY HALL, Montpellier (France) SINGLE-FAMILY HOME,


Architects: Ateliers Jean Nouvel (representative Dakar (Senegal)
architect), François Fontès (external architect)  Architects: Koffi and Diabaté Group
Client: Town of Montpellier Technal solutions used: TOPAZE window, TOPAZE
Technal-approved aluminium frame maker: Labastère sliding system, SAFETYLINE louver window
Technal solutions used: Joinery systems Photography: DR Technal
developed using SOLEAL windows
Photographer: Luc Boegly
PALACE OF CONGRESS, Seville (Spain)
Architect: Guillermo Vázquez Consuegra  Client: Consorcio Palacio de Exposiciones y
Congresos de Sevilla Technal-approved aluminium frame maker: Cristalería y Aluminios
Guzmán  Technal solutions used: SOLEAL doors and windows, LUMEAL sliding systems
and GEODE curtain walling Photographer: Fernando Alda

40 / 41
Architect: Fabri Photographer: Philippe Jaunet

DOORS
AMBIAL · SOLEAL 55 · TITANE · TOPAZE
DOORS

AMBIAL, the multi-space folding door

PRODUCT BENEFITS
75 mm module for the opening and fixed frame
Large sizes available up to 12 m long in 10 leaves
Infill from 14 to 52 mm
Sleek design:
- Straight uniform black lines in the open position
thanks to the black gasket and hardware
- Black hinges concealed in the vertical line of the
gasket in the closed position
- Exclusive Technal handle solution with an
integrated or removable key, no visible
fixings in the closed position
Advanced thermal performance
3-point locking system with insulated key lock

Photography: DR Technal

CROSS-SECTIONS PERFORMANCE

LARGE SIZES Up to W 1,2 m x H 3 m for the 1-leaf door

kg MAXIMUM HEIGHT Up to 150 kg per leaf

SECURITY RC2 (certification pending)


75

CONFIGURATIONS PRODUCT FOCUS


Up to 10 leaves

Bottom rollers concealed by Screw heads covered Black painted lock Extra-flat leaf Opening frame groove
Open-in and open-out Open from the middle or from the side
black covers with black caps which and hardware handles and half- cover: synthetic profile
also contribute to faceplates cylinder key covers or black acoustic gasket
weather performance which can be powder
-coated in any
Technal colour
44 / 45
DOORS

SOLEAL 55, the universal door


that offers multiple solutions

PRODUCT BENEFITS
55 mm module
3-In-1 design: hinged door, pivoting swing door
and tube-bulb stile door all from the same base
product
Large size door available up to 3 m high
Intensive-use door (high volumes of traffic) Single-action
on hinges
Door compatible with SOLEAL windows and
sliding systems
Finger
protection
tube

Swing door
on ground pivot
Photographer: Xavier Bénony

CROSS-SECTIONS PERFORMANCE
Vertical

MAXIMUM DIMENSIONS Up to W 1.1 m x H 3 m

kg MAXIMUM WEIGHT PER LEAF Up to 150 kg

Uw = 1.4 W/m².K, TLW = 0.47, Sw = 0.37


THERMAL with triple glazing Ug=0.6 W/m²K, TL=0.73, g=0.51 and insulating glazing crossbar

Tested at torsion and warping stresses in accordance with the standard EN 947-2
RESISTANCE (vertical loads). 100 daN EN 948-2 (torsion). EN 949-2 (soft body shocks) 150 joules
Hinged single action
Subjected to more than 1 million opening/
ENDURANCE closing test cycles in accordance with the method described in standard EN 1191:
class 8 of scale EN 642-2
22

WEATHER PERFORMANCE A4 E6A VC3* (1-leaf open-out hinged door with a disabled access threshold)

ACCESSIBILITY Threshold-less installation to facilitate access for disabled persons.

SECURITY RC3 break-in resistance class (according to the standard EN 1627)


CONFIGURATIONS
*(A = Air, E = Water, V = Wind)
Single action open-in/open-out Double-action Composition

1 leaf - 2 leaves 1 leaf - 2 leaves


1 leaf - 2 leaves 1- and 2-leaf with transom or fixed side light 46 / 47
DOORS

TITANE, the intensive use door with


enhanced burglary resistant security features
sección vertical (A A’)

170

PRODUCT BENEFITS
63 mm module
Sleek aesthetic, elliptical lines, concealed hinges,
integrated handle
170 mm A
Hinge system subjected to 1 million class 8 test
cycles
Anti-finger trap version is ideal for public places
Screwed internal glazing beads to delay burglary
155

and vandalism
exterior

interior

Access controlled via an electromagnetic closure


system and 3-point lock

Architect: Nathalie Larradet Photographer: DR Technal


161 mm A’

CROSS-SECTIONS PERFORMANCE
128 128 Open-out
vertical
MAXIMUM DIMENSIONS Up to W 1.30 m x H 2.50 m

kg MAXIMUM WEIGHT PER LEAF Up to 140 kg


170

1-leaf
Horizontal
THERMAL No thermal break

Subjected to torsion and warping stress tests in accordance with the standard EN 947-2
167 154
RESISTANCE (vertical loads). 100 daN EN 948-2 (torsion). EN 949-2 (soft body shocks) 150 joules

Subjected to more than 1 million opening/


ENDURANCE closing test cycles in accordance with the method described in standard EN 1191:
class 8 of scale EN 642-2
Double barrier peripheral seal (rubber and brush seals) that continue over
1-leaf with level 2 WEATHER PERFORMANCE the hinges Additional weather resistance provided by a tubular threshold
anti finger-trap
Horizontal
ACCESSIBILITY Threshold-less installation to facilitate access for disabled persons.

SECURITY RC2 break-in resistance class (according to the standard EN 1627)


155

Test results according to product standard NF 270-1


CONFIGURATIONS

1- and 2-leaf, open-in 1- and 2-leaf, open-out Composite assembly with transom Compatible with a Compatible with GEODE curtain walling
48 / 49
and/or fixed side lights technical mullion
DOORS

TOPAZE, the contemporary door


that can be adapted to each project

PRODUCT BENEFITS
46 mm module with no thermal break
Hinged single-action door
Double-action door via an in-ground pivot.
Double-action anti finger-trap version
Wide range of handles and closing mechanisms
Several different thresholds suitable for different
locations

Architects: LOTT JP/ BRESSON - COMBES - ONDET/ ARCHITECTES Photographer: Camus

CROSS-SECTIONS PERFORMANCE
123
152

Up to W x H = 1.10 m x 2.40 m
MAXIMUM DIMENSIONS
1-leaf door with recessed split hinges

kg MAXIMUM WEIGHT PER LEAF Up to 120 kg

THERMAL No thermal break


Single-action Single-action
1-leaf 2-leaf
WEATHER PERFORMANCE Double barrier seal (EPDM gasket) and tubular threshold
149

118
ACCESSIBILITY Installation without a threshold or with a reduced threshold (< 20 mm)
46

Double-action Double-action
1-leaf 2-leaf

CONFIGURATIONS

1- and 2-leaf door Compatible with 1- and 2-leaf door 1-leaf 2-leaf
Open-in and open-out Double-action Double-action 50 / 51
DOORS

REFERENCES

HOTEL QUEMADO, Al Hoceima (Morocco)


Architectural practice: Patrick Genard
Technal solutions used: SOLEAL doors Photographer: Patrick Genard

SINGLE-FAMILY HOME, AQUITAINE HOUSE OF ARCHITECTURE,


Abidjan (Ivory Coast) Bordeaux (France)
Architectural practice: A + A  Architects: Julie Fabre and Mathieu de Marien
Client: Private (FABRE / de MARIEN Architectes) 
Installer: ADS Client: Ordre des Architectes d’Aquitaine [Aquitaine
Technal solutions used: TOPAZE+ sliding systems, Order of Architects]
TOPAZE windows, TOPAZE doors, Technal-approved aluminium frame maker: Lafosse SAS
SAFETYLINE louver windows Technal solutions used: GEODE curtain walling
Photography: A + A  and TITANE door
HOTEL AGORA, Peñíscola (Spain)
Photographer: Stéphane Chalmeau
Architect: Juan Añón (AIC)  Technal-approved aluminium frame maker: Forment 
Technal solutions used: TITANE doors Photographer: Wenzel

52 / 53
Architect: Agence Chabanne & Partenaires Photographer: Jordi Canosa

GEODE
FAÇADES
FAÇADES

GEODE, creative curtain walling with a visible


grid to highlight the geometry of the building

PRODUCT BENEFITS
52 or 62 mm module
Straight façade or façade inclined up to 20°
Possibility of incorporating concealed tilt and
turn, parallel, top-hung or fire access opening
frames.
Concealed drainage by area
6 to 42 mm glazing depending on the module
used on the façade
62 mm module option to increase the size of the
glazing and meet demanding projects in terms of
thermal and acoustic performance
Single glazed curtain walling option

Architects: KPP Architects Photographer: DR Technal

CROSS-SECTIONS 62
PERFORMANCE

MAXIMUM WEIGHT PER


52 100
kg 300 kg
GLASS BLOCK

Fixed façade with 80% glazing:


THERMAL Ucw = 1.4 W/m²K. with Ug = 1.1 W/m²K.

FIXED LIGHT WEATHER A4 R7 / Satisfactory results in pressure and vacuum tests 1600 Pa and 2400 Pa
PERFORMANCE (sudden pressure)

TOP-HUNG OPENING FRAME


A3E1200VC5*
WEATHER PERFORMANCE

Test results according to the thermal standard: EN 13947, weather resistance: EN 13830
*(A = Air, E = Water, V = Wind)

Fixed visible grid Concealed projecting top-hung opening frame GEODE 62 Visible grid
62 GEODE Single glazing
52
The single glazed MX option for the MX visible
grid and Trame has been specially developed
for geographical regions in which the climatic
CONFIGURATIONS conditions do not require advanced thermal
performance or the use of double glazing.

52
Laminated single glazing from 6 mm to 11 mm
available for straight façades or façades inclined up
P
to 10°.
Concealed top-hung opening frames can be 22

provided for structural sealant glazing from 6 mm to


Fixed Top-hung Tilt and turn Bottom- Inward Parallel Fire access
window frame/Turn and hung opening
11 mm. GEODE single glazed window with Horizontal Trame
frame window window
tilt frame window window The GEODE single glazing system allows Technal's
1-leaf window and door systems to be integrated into
curtain walling structures.
56 / 57
FAÇADES

GEODE, the trame effect curtain walling to


highlight a building’s façade

PRODUCT BENEFITS
52 or 62 mm module
Variety of caps available depending on the type
of trame to give depth to the façade
Straight façade or façade inclined up to 10°
Possibility of incorporating concealed tilt and
turn, parallel, top-hung or fire access opening
frames
Drainage with pressure equaliser
6 to 42 mm glazing
Punctual pressure plate to prevent deformation of
the glass
Dry glazing, no use of putty on site

Architects: AFL Architects Photographer: Shaw & Shaw

CROSS-SECTIONS PERFORMANCE
52
MAXIMUM WEIGHT PER
kg 300 kg per transom
100 GLASS BLOCK

Fixed façade with 80% glazing:


THERMAL Ucw = 1.6 W/m²K. with glazing Ug = 1.3 W/m²k.

FIXED LIGHT WEATHER A4 R7 / Satisfactory results in pressure and vacuum tests 1600 Pa and 2400 Pa
PERFORMANCE (sudden pressure)

TOP-HUNG OPENING FRAME


22

A4- E9A-VC3*
WEATHER PERFORMANCE

Test results according to the thermal standard: EN 13947, weather resistance: EN 13830
*(A = Air, E = Water, V = Wind)
22

Vertical trame with Horizontal trame Vertical trame


concealed top-hung frame

GEODE Flat cap


The GEODE flat cap uses the same structure as the trame façade; it’s an
CONFIGURATIONS attractive and cost-effective alternative to structural glazing to achieve flush-
effect curtain walling.
4.5 mm thick black cap/pressure plate on the external glazing.
Straight wall and structure with convex angles from 90 – 135°.
P Possibility of integrating:
- 224 or 31 mm concealed opening structural sealant glazing
- SOLEAL Visible sashes (including fire access frame).
Fixed Top-hung Tilt and turn Bottom- Inward Parallel Fire access Possibility of giving the wall a horizontal or vertical trame appearance.
48

frame window frame/Turn and hung opening window window Horizontal cross-section Vertical cross-section
tilt frame window window
1-leaf

58 / 59
FAÇADES

GEODE, contemporary curtain walling with


beading to emphasise the glazing blocks

PRODUCT BENEFITS
52 mm module
GEODE façade with beaded structural glazing
Glazing beads riveted to the fixed frame for
guaranteed additional safety
Straight façade or façade inclined up to 2°
Possibility of integrating concealed top-hung, tilt
and turn or fire access opening frames
A patented “hook and toggle” fitting system
facilitates the installation of the frames
Optional reinforced beaded structural glazing
up to 36 mm for optimised acoustic and thermal
performance
Infill from 6 to 32 mm
Dry glazing is mounted onto the frames in the
factory and held in place with glazing beads
Architects: Brochet Lajus Pueyo Cabinet Photographer: Abbadie Hervé

CROSS-SECTIONS PERFORMANCE

MAXIMUM WEIGHT PER


kg 100 kg
108
100
GLASS BLOCK

Fixed façade with 80% glazing:


THERMAL Ucw = 1.5 W/m²K. with glazing Ug = 1.1 W/m²k.

FIXED LIGHT WEATHER A4 R7 / Satisfactory results in pressure and vacuum tests 1600 Pa and 2400 Pa
PERFORMANCE (sudden pressure)

TOP-HUNG OPENING FRAME


A4- E9A-VC3*
WEATHER PERFORMANCE

Test results according to the thermal standard: EN 13947, weather resistance: EN 13830
*(A = Air, E = Water, V = Wind)
22

100

GEODE beaded structural glazing with GEODE beaded structural glazing


a transparent fixed section with a top-hung opening frame

CONFIGURATIONS

Fixed Top-hung Tilt and turn Inward Fire access


frame window frame/Turn and opening window
tilt frame window
1-leaf

60 / 61
FAÇADES

GEODE, curtain walling with structural sealant


glazing to gives the building a flush appearance

PRODUCT BENEFITS
52 mm module
100% glazed wall without externally visible
aluminium
The glass volumes are fixed to the aluminium
frames with silicone and shop-fabricated by
companies certified according to European
standards
Straight wall or wall inclined up to 2°
6, 23 or 31 mm infill or 60 mm insulating panels
Possibility of integrating concealed top-hung, tilt
and turn or fire access opening frames
Optional reinforced structural sealant glazing up
to 34 mm for optimised acoustic and thermal
performance

Architects: GIREC Photographer: Xavier Benony

CROSS-SECTIONS PERFORMANCE

52 MAXIMUM WEIGHT PER


kg 80 kg
GLASS BLOCK

Fixed façade with 80% glazing:


THERMAL Ucw = 1.8 W/m²K. with glazing Ug = 1.1 W/m²k.

FIXED LIGHT WEATHER A4 R7 / Satisfactory results in pressure and vacuum tests 1600 Pa and 2400 Pa
(sudden pressure)
78
22

PERFORMANCE

TOP-HUNG OPENING FRAME


A4- E9A-VC3*
WEATHER PERFORMANCE

Test results according to the thermal standard: EN 13947, weather resistance: EN 13830
22 *(A = Air, E = Water, V = Wind)
61

GEODE structural sealant glazing with GEODE structural sealant glazing


a fixed horizontal frame with a fixed vertical frame

CONFIGURATIONS

Fixed Top-hung Tilt and turn Inward Fire access


frame window frame/Turn and opening window
tilt frame window
1-leaf

62 / 63
FAÇADES

GEODE sloped glazing for inclined roofs


consistent with vertical walls

PRODUCT BENEFITS
2 possible external looks: visible grid or vertical
trame
Water retention management with drainage at the
ends of transoms through the glazing bars
Glazing deformation is minimised thanks to the
vertical caps and the silicone gasket Lantern
Possibility of double glazing using structural
silicone
Minimum incline of 5 ° (validated by the CSTB) Pyramid
with double glazing
The rafters and transoms are square cut and
assembled using the penetrating transom
principle Roof light
Possibility of integrating an opening frame into
the roof

CROSS-SECTIONS

GEODE visible grid glass roof GEODE vertical trame glass roof

Photographer: Monthiers V.
Architect: Nathalie Larradet

GEODE roof opening frame


64 / 65
FACADES

REFERENCES

MYRIAD DE SANA HOTEL, Lisbon (Portugal) ÉVASION AUDITORIUM, Ambarès and Lagrave (France)
Architectural practice: Nuno Leónidas Arquitectos (NLA) Manufacturer installer: EDIMETAL  Architects: Laurent Portejoie, Paul Marion, Fréderic Neau, Jean-Christophe Masnada
Technal solutions used: GEODE façades and TOPAZE windows Photography: Sana Hotels Client: Mairie d’Ambarès and Lagrave Technal-approved aluminium frame maker: Miroiterie Lafosse
Technal solutions used: GEODE façade and TOPAZE sliding system Photographer: Arthur Pequin

UNIVERSITY COLLEGE OF TECHNOLOGY (UCTS), Sarawak (Malaysia) SAMBIL SHOPPING CENTRE, Saint Domingue (Dominican Republic)
Architect: Hii Puong Ching – Akimedia Group Manufacturer installer: Sincere Aluminium Architects: David Gabay Technal solutions used: GEODE glass roof Photography: DR Technal
Technal solutions used: GEODE curtain walling, TITANE doors, SUNEAL brise-soleil and
TOPAZE windows Photography: DR Technal

66 / 67
Architect: PPA Architecture Photographer: Philippe Ruault

NOTEAL · SUNEAL · GYPSE


BALUSTRADING
SOLAR PROTECTION AND
SOLAR PROTECTION AND BALUSTRADING

NOTEAL, light and shade protection,


a complete range of panels and shutters

PRODUCT BENEFITS
Contemporary solar protection panels and roller
and hinged shutters
Designer solar protection with natural ventilation
and enhanced security
A range of infills: fixed or moveable louvres,
solid or combination, full-height or with a
transom
All installation scenarios are taken into account: Solar protection
wall or lintel mounted
panel
Option of a motor concealed in a top panel is
available for sliding shutters
Sliding
shutter
Hinged
shutter
Architects: Carlos Ferrater, Lucía Ferrater and Xavier Martí Photographer: Sergio Padura

CONFIGURATIONS PERFORMANCE
SOLAR PROTECTION PANELS
MAXIMUM DIMENSIONS Up to 2.4 m high and 1.4 m wide per leaf
Fixed Slider

WIND RESISTANCE Wind resistance: class 6

Reversed Y-shaped Inclined rectangular Straight rectangular Inversed Inclined rectangular Straight rectangular
louver (fixed) louver (fixed) louver (fixed) Y-shaped louver louver louver

SLIDING SHUTTER HINGED SHUTTER


Solid vertical blade Full-height louver shutter Louvre blind with transom Combination (solid + vertical) Bar and brace Solid vertical louver

1-leaf 2-leaf 3-leaf 1 arched 2 arched 1-leaf 2-leaf 3-leaf 1 arched 2 arched
leaf leaves leaf leaves

1 leaf with a 2 leaves 1-leaf 2-leaf 1-leaf louver 2-leaf 1 combination 2 combination Full-height louver shutter Louvres with transom Combination (louvres + solid blades)
solid vertical with solid full-height full-height shutter louver shutter leaf leaves
louver vertical louver shutter louver shutter with transom with transom (fixed+solid) (fixed+solid)
louvers

1-leaf 2-leaf 3-leaf 1-leaf 2-leaf 3-leaf 1-leaf 2-leaf 3-leaf

"Niçoise" style in the lower "Niçoise" style in the middle section (patio door)
section (window)

1-leaf 2-leaf
1-leaf 2-leaf 70 / 71
SOLAR PROTECTION AND BALUSTRADING

SUNEAL, the multi-purpose brise-soleil to


guarantee optimum natural light

PRODUCT BENEFITS
Vertical or horizontal, fixed or adjustable brise-
soleil
Fifteen blades available in different sizes and
designs
Motorisation option available for maximum solar
gain
Fully compatible with all GEODE façades via an
independent frame and as a wall covering with
blades and louvers

Architects: Espagno Milani Architectes Photographer: Sylvain Mille

INSTALLATION PERFORMANCE

BLADE DIMENSIONS 100 to 600 mm depending on the configuration

Progressive speed of air flow up to 160 km/h


WIND RESISTANCE
Maintained for 18 min. Rapid increase to 210 km/h

ORIENTATION 0°, 15°, 30°, 45°, 60°

Tests performed at the CSTB

TLC002
34

Compatible with GEODE curtain walling Between supports Continuous blades


SPECIAL BLADES

BRISE-SOLEIL BLADES
TLC001

Monobloc Composite Semi-elliptical

100 x 25
120 x 23
180 x 30
207 x 30
240 x 40
270 x 50
Rectangular blades 100 and 115 mm Perforated sheet metal
300 x 50 (300 mm x 40 mm) blades and louvers for large sizes

300 x 40 72 / 73
SOLAR PROTECTION AND BALUSTRADING

GYPSE, the double post architectural


balustrade with minimalist lines

PRODUCT BENEFITS
Industrial design: contiguous or spaced posts,
flat or round midrails for models with or without
infills
Variety of materials: aluminium, stainless steel,
wood, glass, composite panels, decorative sheet
metal
Wide range of infills: glass, sheet metal, stainless Joined posts
steel rods or cables, St Andrew's cross, with or
without a midrail
Corner bracket for a 90° corner plate
Available as a balcony separator and swimming
pool barrier
Possibility of raked balustrades from 0 ° to 38 °
for stairs
80 test reports
Variety of different installation options tailored to Spaced posts
each project: slab nose, on a slab, etc. Photography: DR Technal

50 65

CROSS-SECTIONS LEGAL RESTRICTIONS


Joined posts Spaced posts Private place Public place Private place Public place
Round midrail and Handrail and full-height
glass bottom section infill rectangular midrails and
Round handrail glass bottom section infill 1600 mm 930 mm 1600 mm 930 mm
hauteur poteau=950

120

H=1005.5

hauteur poteau=950
H=1024

1600 mm 930 mm 1600 mm 930 mm


414

1800 mm 1550 mm 1600 mm 930 mm

1600 mm 930 mm
Scope of use = maximum
85 85 distance between posts

CONFIGURATIONS
Examples of raked or straight balustrade configurations - Installation on a slab or slab nose

Straight - continuous panels Straight - railings Raked

Under handrail Under midrail With embellishment Cables and glass infill Midrails and glass bottom Under handrail Under midrail
section Continuous panels under Railings Railings under midrail
midrail under handrail

74 / 75
SOLAR PROTECTION AND BALUSTRADING

GYPSE, the single post traditional


balustrade with minimalist lines

PRODUCT BENEFITS
Multiple combinations of components and a
variety of materials
Sleek design:
- Single symmetrical post 50 x 24 mm
- Discreet fixings
- Various handrail designs
90° corner plate with a single post
Wide variety of infills: railings, continuous panels
beneath a handrail, continuous panels with a St
Andrew’s cross or an “steamship” version
Variety of different installation options to meet
the needs of each project: slab nose, on a slab,
etc.
Possibility of raked balustrades from 0 ° to 38 °
for stairs
Adjustable feet
Bars to be screwed or crimped
70 test reports Photographer: V. Bigeard

CROSS-SECTIONS 65 50 LEGAL RESTRICTIONS


35 45.5
65
PRIVATE PLACE PUBLIC PLACE
60
60 35
Infill (glass, Infill (glass,
21
21
Railings sheet metal) Railings
sheet metal)
150

150

1600 mm 1599 mm 985 mm 984 mm


26.5
26.5

25.5 29.5
29.5

H = 1034
H = 1034 130

H = 1013.5
H = 1013.5
H = H1023.5
= 1023.5

H =H =1010
1010 26.5
26.5 1800 mm 1800 mm 1800 mm 1800 mm

419.5

1600 mm 1599 mm 985 mm 984 mm


19
19
26.5
43 43
90 90
90 90

1600 mm 1540 mm 985 mm 980 mm


Railings between posts Railings in front of posts St Andrew’s cross continuous panel Ship-style continuous panel Scope of use = maximum
distance between posts
CONFIGURATIONS
Examples of straight or raked guardrail installations Raked

Straight - continuous panels Straight - railings

Under handrail Under midrail Running band Railings under Railings under
Under handrail Under midrail Decorative ‘Steamship’
under midrail handrail midrail
76 / 77
SOLAR PROTECTION AND BALUSTRADING

REFERENCES

MÉTRONUM AUDITORIUM, Toulouse (France)


Architectural practice: GGR Architectes  Client: Toulouse Town Hall - Oppidea
Technal-approved aluminium frame maker: Labastère  Technal solutions used: SOLEAL frame and
SUNEAL brise-soleil Photographers: Thierry Schneider and Sylvain Mille

COLLECTIVE HOUSING, Barcelona (Spain) OFFICE PARK EXPO, Lisbon (Portugal)


Architects: Carlos Ferrater, Lucía Ferrater Architects: Nuno Leónidas and Frederico Valsassina 
and Xavier Martí Galí (OAB)  Technal solutions used: SUNEAL brise-soleil
Client: Metro 3 Photography: DR Technal
Technal-approved aluminium frame maker: Talleres
Valeriano Montón
Technal solutions used: NOTEAL shutters
Photographer: Alejo Bagué

GOSIER TOWN HALL (Guadeloupe)


Client: Véronique Bigeard Technal solutions used: GYPSE single post balustrade
Photographer: Véronique Bigeard

78 / 79
Architects: Lcr Architectes Photographer: Sylvain Mille

COBALT
SECURITY
SECURITY

COBALT, the security solution

PRODUCT BENEFITS
Single or double row of armour-plating integrated
into the fixed or opening frame
Adaptable armour-plating with steel or aluminium
profiles
The sliding system:
2-track 150 mm fixed frame for 2- or 3-leaf sliders
Infill from 39 to 61 mm
Closure via pull handles, central key lock or
multipoint lateral lock
The door:
Movement via 3-part hinges.
Infill from 17 to 66 mm

Photography: DR Technal

CROSS-SECTIONS PERFORMANCE

136 Slider Door


91

DIMENSIONS MINIMUM: W x H = 0.49 m x 0.85 m MAXIMUM: W x H = 1.20 m x 2.35 m


149

kg MAXIMUM HEIGHT Up to 300 kg per opening frame Up to 240 kg per opening frame

A3 E7A VA5* 2-leaf armour-plated leaves


WEATHER PERFORMANCE
W x H = 1.51 m x 1.31 m
FB3, FB4, FB5, FB6 resistance class in FB2, FB3, FB4, FB5, FSG resistance class
SECURITY accordance with the standards NF 1522 in accordance with the standards NF
and 1523 1522 and 1523
Horizontal cross-section of a slider Horizontal cross-section of a door Weather resistance according to certificate CEBTP E213.3.070/1
*(A = Air, E = Water, V = Wind)

CONFIGURATIONS
Slider Door

2-leaf 3-leaf, 2-track 2 composite leaves

Open-out Open-in 2-leaf 2-leaf 2-leaf door Airlock


door door open-out door open-in door with fixed side
and top light 82 / 83
OFFICE AND SHOP FITTINGS
TECHNAL SYSTEM - OPALE - OFFICE AND SHOP FITTINGS
Photographer: R. César
Architect: Pettes and Sagnes
OFFICE AND SHOP FITTINGS

TECHNAL SYSTEM, modular internal and


external office and shop fitting solutions

PRODUCT BENEFITS
Simple and versatile
Straight or curved
A modular system that accommodates all design
features: front window, partition, low table,
furniture, workbench, etc.
Possibility of various infills (4 to 76,5 mm)
Possibility of hinged and sliding frames for
internal or external use.

CROSS-SECTIONS

Variable-angle front window

CONFIGURATIONS
Shop windows Faceted façades
Photographer: Wenzel

86
10 / 87
11
OFFICE AND SHOP FITTINGS

OPALE, internal partition system


with multiple configurations

PRODUCT BENEFITS
3 types of configurations: Standard partition,
with a narrow rail or recessed junction
Framed partitions or glazed panels fixed side by
side for a sleek design
Wide variety of infills
Possibility of integrating: glass safety door (6 to
8 mm), wooden doors (40 mm), aluminium
framed doors, full-access hinged doors or sliders
Vertical or horizontal trames which can be
customised with different trims
Fire resistance: Schott flame guard test on OPALE
structural glazing system (PF 30)
Moveable and removable partition:
CER.F.F. C.07-433R.

Photography: DR Technal

CROSS-SECTIONS 78 78
PERFORMANCE
30.7

30.7
55.5

55.5

Up to 100 kg
kg MAXIMUM WEIGHT PER LEAF
Hinged wooden door

-42 dB
78

ACOUSTIC Full-height glazed partition 44.2 CER.F.F. C.07-433

12
With a soft body shock (bag of 50 daN with 300 J of energy applied to the centre
Flat partition with wooden recess junction of the solid and glazed partition modules). CER.F.F. C.07-433
H H
With a soft body shock (bag of 50 daN with 400 J of energy applied to the centre
SECURITY
of the solid and glazed partition modules). European Technical Approval

With a rigid body shock (1 kg ball, 10 J of energy, < Ø 20 imprint,


< 2 mm deep). CER.F.F. C.07-433 / European Technical Approval
Flat and
3 recessed Flat and
Hinged doors
1- or 2-sided recessed
42.5

42.5

full-height glazed Full-height solid


module module

CONFIGURATIONS
Frame Frame for wooden Frame for safety 1-leaf door, 2-leaf door. 1-leaf door, pocket 2-leaf door, pocket
Standard partition Flat recessed partition
for wooden door door under a glass door pocket glazing with pocket glazing glazing with handle glazing with handle
mullion handle with handle

Full-access sliding door


Full-access sliding doors, 1- and Full-access sliding doors, 1- and 2-leaf with fixed top light
Full-height Full-height Glazed module on Multi-crossbar Full-height Full-height Glazed module on Multi-crossbar Adjustable 2-leaf without fixed top light
solid module glazed module a solid apron wall module solid module glazed module a solid apron wall module module

Flat partition with wooden recess junction

Full-height Glazed module on


solid module a solid apron wall 88 / 89
OFFICE AND SHOP FITTINGS

SHOP AND OFFICE FITTING,


standard ULT profiles
TUBULAR PROFILES
1,5 2 1,5 2 2,5
1,5
PRODUCT BENEFITS 20
25
15
30 XR303015 30 XR30302
30
20 50 XR200502
Over 100 bend-free aluminium profiles, TM6851
25
XR301515 30 30
TM6852
available in all Technal colours
1,5 2 1,5 2 200
1,8 1,5
20 XR402015 20 T3110
40 40 18 T3120
XR404015 XR40402
40 40
100
2
40 40
25 XR50252 2 4 2
1,5 XO3015 1,5 TO610 2 XO5015 1,5
15 T3360
50
2 ø20
60 ø30 ø30
50 XR50502 50 TEU2605
1,5 XO2015
30 ø50
XR50302
20 TEU2100

50 50 50 60
2
2

1,5

XR60602 63 T0591 T0615 XO1005 5


60 1,4
40 XR804015

60 63 80
ø80 ø100
2 2,5 2

U PROFILES 2
40 XR80402 42 TO593

1,6 1,6 2 T0592


1,8 84
1,5 1,5 80
1,5 1,5
1,5 2 84
1,5 35
1,5 25 1,5 25 25
20 16 20 15 20 20
10 13 10
8 10 12 13 13 15 15 20 20 20 20 25 25 1,7
TO501 TO502 TM6513 TO504 TO505 TO506 TO507 TM6517 XU202015 TM6546 TO509 TO526 TO503
25 XR102517 84
1,6 1,6
2,5
100
1,6 2
42 42
1,5
20 20 20 2
16

32 34 45,5 11,2 14,2


100 XR10025

FLAT PRFILES
TO514 TO522 TO520 TO530 TO560
50 XR100502

TM6717 TM6701 T3101 TM6705


L PROFILES 100
12
2
20
2
30
2
40
2
1,5 2
2 2,5 100
1,5 1,6 1,6 2
1,2 2 XF605
1,5 30 30 4 T3102
1,6 2 25 20 3 5
16 T0542 20 XL202015 20 TO543 16 TO552 TO545 TO553 20 XL30202 XL303015 XL30302
15 XL151515 12 TO551 10 TM6607 50 60
50 XR105025
16 20 20 20 25 25 25 30 30 30 30
15 2,5
1,7 2 50 XR100504*
2 XF8010 XF10010
2
2 1,8 10
1,5 1,7 2 10
40 40 40 100
32 30 80 100
20 XL402015 20 XL402017 20 25 25
T0547 TO566 TO558 XL40302 XL404017 XL40402 TO548 XL502518 100

32 40 40 40 40 40 2 2
2,5 40 40 40 50
2
1,7 1,7
30 XR150302
1,7 2,5 40 XR120402
2 25
50 50 XL852517
2 40 150
T PROFILES
30 32 32
XL503017 XL50502 20 85 120
TO559 TO549 TM6630 XL60322 XL804017 2
50 50 50 50 60 4
60 80
1,7 15 25 40

60 15 XT151515 TO584 TO588


50 XR150504 25
2 40 2 1,7 1,5
40
2
20 TM6633 XL120401 20 20 XL102017 XL60602
TM6638
80 2,5
120 120 100 60 150
90 / 91
OFFICE AND SHOP FITTINGS

REFERENCES

MASSIMO DUTTI STORE


Photography: DR Technal

Photographer: Xavier Boymond Architect: Cabinet Dalmassa-Grazian 


Photographer: Serge Demailly

LA CAIXA BANK
Photographer: Wenzel

92 / 93
HANDLES
HANDLES

Sliding systems Windows

LUMEAL SOLEAL

Thumb pull Minimal design Minimal design Inclined Inclined handle, Straight handle Locking button
handle pull handle handle, central handle central service for service
opening opening frame opening frames Designer handle Double low profile Handle with lock Stainless steel Long stainless steel
4-leaf TECHNAL handle handle handle
Also available:
- External handle with key lock

SOLEAL

Also available:
- Removable handles

Classic handle Traditional handle

Long TECHNAL exclusive


Designed handle Stainless stainless Locking Service opening semi-fixed thumb
TECHNAL steel handle steel handle button frame handle pull handle

GALENE TOPAZE

Also available:
- Finger grip handle
- Grip pull handle
- Lift thumb pull handle
- Fire access opening frames
- External handle with key lock
- Straight Long lift-and-slide handle
designed handle

Designed handle Classic handle “Eco” handle Stainless steel Long stainless steel
TECHNAL handle handle

TOPAZE
SAFETYLINE

Also available:
- Winding mechanism

Pull handle Half-moon Single recessed Recessed Pull handle with Grip Thumb pull Single barrel Reversible handle Indexed lever handle Lever
handle handle handle for multi- key lock handle handle or lever lock handle
point closure
systems

96 / 97
HANDLES

Doors

SOLEAL TOPAZE

Double handles Trilobe push bar Recessed trilobe Round push bar Recessed tubular Handle on Trilobe push bar Recessed trilobe Round push bar Also available:
on plates push bar handle rosette push bar - Flat pad

Also available:
- Straight tubular handle
Designed handle Low profile Stainless steel handle * TECHNAL exclusi- - Stainless steel push bar
TECHNAL * handle * ve door pad handle - Fire access opening frames

* Available with a single or double handle

TITANE

Half-moon Double handles Trilobe push bar Recessed trilobe


handle on plates push bar

Round push bar Recessed tubular Also available:


handle - Fire access handles

98 / 99
Technal throughout the world

HEAD OFFICE: INDIA FRANCE SPAIN


270 rue Léon Joulin 54 Virgo Nagar, 270 rue Léon Joulin Camí de Ca n’Ametller, 18
31037 Toulouse Cedex 1 Old Madras Road, 31037 Toulouse Cedex 1 08195 Sant Cugat del Vallès
FRANCE Bangalore - 560049 Tel. +33 (0)5 61 31 28 28 Barcelona
Tel. +33 5 61 31 28 28 www.technal.in www.technal.fr www.technal.es
www.technal-int.com
MOROCCO IRELAND SWITZERLAND
ARGENTINA 33 rue Sébou Unit J1 Baldonnell Chemin du Long-Champ 99
Calle 4 N°262 - Parque Industrial
de Pilar Pilar (B1629MXA) Buenos Quartier Gauthier Business Park CH-2504 Biel/Bienne
Aires 20000 Casablanca Naas Road www.technal.ch
wwww.technal-int.com www.technal-int.com Dublin 22
www.technal.ie UNITED KINGDOM
BAHRAIN
P. O. Box: 21848 SOUTH-AFRICA SBS Centre, Silkwood Park
Manama Building 1, Platinum Close, 86 PORTUGAL Wakefield WF5 9TG
www.technal-me.com Tsessebe Crescent, Sucursal em Portugal www.technal.co.uk
Corporate Park South, Rua da Guiné
BRUNEI DARUSSALAM Midrand 2689-513 Prior Velho
No. 59 & 60, 2nd Floor,
Hj Munchit Complex www.technal.co.za www.technal.pt
SPG 13, Jalan Berakas
Bandar Seri Begawan
www.technal-int.com
The world looks better

Architect: BVL Architecture Photographer: J-F Tremege


0000.001 - Non contractual document

Das könnte Ihnen auch gefallen