Beruflich Dokumente
Kultur Dokumente
www.vishay.com
Vishay Semiconductors
Low Current SMD LED PLCC-2
FEATURES
• SMD LED with exceptional brightness
• Luminous intensity and wavelength
categorized
• Compatible with automatic placement
equipment
• EIA and ICE standard package
19225 • Compatible with IR reflow, vapor phase
and wave solder processes according to
CECC 00802 and J-STD-020
DESCRIPTION
• Available in 8 mm tape
This device has been designed to meet the increasing
demand for AlInGaP technology. • Low profile package
The package of the VLMYG30H2K1 is the PLCC-2. • Non-diffused lens: excellent for coupling to light pipes and
backlighting
It consists of a lead frame which is embedded in a white
thermoplast. The reflector inside this package is filled up • Low power consumption
with clear epoxy. • Luminous intensity ratio in one packaging unit
IVmax./IVmin. ≤ 1.6
PRODUCT GROUP AND PACKAGE DATA • Preconditioning according to JEDEC® level 2a
• Product group: LED • ESD-withstand voltage: > 2 kV acc.to MIL STD 883 D,
• Package: SMD PLCC-2 method 3015.7
• Product series: low current LED • AEC-Q101 qualified
• Angle of half intensity: ± 60° • Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Automotive: backlighting in dashboards and switches
• Telecommunication: indicator and backlighting in
telephone and fax
• Indicator and backlight for audio and video equipment
• Indicator and backlight in office equipment
• Flat backlight for LCDs, switches, and symbols
• General use
PARTS TABLE
LUMINOUS FORWARD
INTENSITY WAVELENGTH VOLTAGE
at IF (nm) at IF at IF
PART COLOR (mcd) (mA) (mA) (V) (mA) TECHNOLOGY
MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.
VLMYG30H2K1-GS08 Yellow green 3.55 4.2 9.00 2 566 574 575 2 - 1.9 2.2 2 AlInGaP/GaAS
VLMYG30H2K1-GS18 Yellow green 3.55 4.2 9.00 2 566 574 575 2 - 1.9 2.2 2 AlInGaP/GaAS
30 100
20 10
10 1
0.1
0
0 20 40 60 80 100 120
1 10 100
Fig. 1 - Forward Current vs. Ambient Temperature Fig. 4 - Relative Luminous Intensity vs. Forward Current
0° 10° 20°
30° 1.2
IV rel - Relative Luminous Intensity
ϕ - Angular Displacement
1.0
Irel - Relative Intensity yellow green
40° 0.8
1.0
70° 0.2
0.7
80°
0
0.6 0.4 0.2 0 500 520 540 560 580 600 620 640
95 10319 λ - Wavelength (nm)
Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Fig. 5 - Relative Intensity vs. Wavelength
100 300
yellow green yellow green
IF - Forward Current (mA)
200
Forward Voltage (mV)
ΔVF - Change of
100
10 0
-100
-200
1 -300
1.0 1.5 2.0 2.5 3.0 -40 -20 0 20 40 60 80 100
VF - Forward Voltage (V) Tamb - Ambient Temperature (°C)
Fig. 3 - Forward Current vs. Forward Voltage Fig. 6 - Chance of Forward Voltage vs. Ambient Temperature
3.5 10
IV rel - Relative Luminous Intensity
Δλd - Change of
2.5
4
2.0 2
1.5 0
-2
1.0
-4
0.5
-6
0 -8
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
Tamb - Ambient Temperature (°C) Tamb - Ambient Temperature (°C)
Fig. 7 - Relative Luminous Intensity vs. Ambient Temperature Fig. 8 - Change of Dominant Wavelength vs. Ambient Temperature
0.9
0.8
Pin identification
technical drawings
according to DIN
2.8 ± 0.15
specifications
2.2
C A
Drawing-No.: 6.541-5067.01-4
Issue: 7; 12.03.14
Ø 2.4
3 + 0.15
1.6 (1.9) 4
SOLDERING PROFILE
TAPING OF VLM.3..
IR Reflow Soldering Profile for Lead (Pb)-Free Soldering
3.5 2.2 Preconditioning according to JEDEC level 2a
3.1 2.0 300
max. 260 °C
250 255 °C
240 °C 245 °C
5.75
217 °C
Temperature (°C)
5.25 4.0
200
3.6
max. 30 s
3.6 8.3
3.4 7.7 150
max. 120 s max. 100 s
100
1.85
1.65
1.6 4.1 4.1 0.25 50 max. ramp up 3 °C/s max. ramp down 6 °C/s
1.4 3.9 3.9
2.05 0
1.95 0 50 100 150 200 250 300
94 8668
Time (s)
Fig. 9 - Tape Dimensions in mm for PLCC-2 19885 max. 2 cycles allowed
ca. 2 K/s
1st line
Fig. 10 - Reel Dimensions - GS08 Fig. 13 - Double Wave Soldering of Opto Devices (all Packages)
G. Total quantity
H. Company code L E V E L
CAUTION
2a
This bag contains
MOISTURE –SENSITIVE DEVICES
DRY PACKING
The reel is packed in an anti-humidity bag to protect the 1. Shelf life in sealed bag 12 months at <40°C and < 90% relative humidity (RH)
devices from absorbing moisture during transportation and 2. After this bag is opened devices that will be subjected to infrared reflow,
vapor-phase reflow, or equivalent processing (peak package body temp.
storage. 260°C) must be:
a) Mounted within 672 hours at factory condition of < 30°C/60%RH or
Aluminum bag b) Stored at <10% RH.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.