Construction of RCC Pavement between Shed No-6 & 7
Unit Price Total Price
Measurement Quantity In figures In Figures (BDT) Item No Description of Item Unit (BDT)
Dismantling of reinforced cement
concrete work such as roof, floor, 1 beam, column, lintel, sunshade etc. Cum 675 including removing the debris to a safe distance.
Dismantling brick masonry in ground
floor in cement mortar of any proportion including removing debris 2 Cum 33 to a safe distance and scaffolding etc. complete (Debris and the released bricks to be carried by head lead).
Dismantling cement concrete of all
proportion including removing the 3 Cum 12 debris to a safe distance and scaffolding as per direction.
Labour for taking out brick on edge
4 pavement in herring bone bond (HBB) Sqm 2773 soling etc. complete.
Labour for taking out brick flat soling
5 Sqm 2825 and stacking as per direction.
Picking up old road surface including
6 Cum 5 collecting and stacking the same at site.
Labour for taking out MS channel,
bracing of sizes from jetty under 7 Kg 5040 structure including cutting bolts and nuts etc. as required and directed.
Labour for cutting RS joists by hacksaw
8 Nos 28 or gas cutter as per direction (Big size).
Earth work in excavation of foundation
trenches for ordinary soil mixed with set cement, scrap iron, broken glass 9 Cum 4060 etc. up to required depth including cutting & removing debris to a safe distance as per direction. Sand filling in yard with fine dry sand crated from outside including spreading, watering, leveling and 10 Cum 1850 compacting with vibro-compactor in 229mm layers etc. as per direction (For compacted measurement).
Labour for breaking 63mm-38mm sizes
11 CC or RCC including stacking at site.
a (63mm~38mm) size. Cum 701
Labour for breaking 38mm-25mm sizes b brick, bricks bats, jhama bats including Cum 591 stacking at site.
Labour for providing compacted sub-
base with 2.83cum broken concrete chips (38mm~63mm) mixed with 0.62cum sand including local handling i.e, mixing sand and concrete chips, spreading uniformly on road/ yard 12 surface to proper grade, comber/ Cum 701 slope, watering and rolling with (8~10)Ton roller for proper compaction as per direction of Engineer excluding cost of concrete chips but including cost of sand etc. complete (For compacted volume).
Providing compacted sub base with
(25mm~38mm) size jhama brick chips and sand (FM= 0.80) in proportion of (2:1) as per specification including local handling i.e mixing sand and jhama chips in a stack yard or road/ yard side land and spreading uniformly on road/ 13 Cum 590 yard bed to proper grade, camber/slope, rolling properly with (8~10)Ton road roller for compaction as per direction of the Engineer excluding cost of jhama brick chips but including sand etc. complete (Measurement will be given for compacted volume). Providing compacted sub base with (25mm~38mm) size jhama brick chips and sand (FM= 0.80) in proportion of (2:1) as per specification including local handling i.e mixing sand and jhama chips in a stack yard or road/ yard side land and spreading uniformly on road/ 14 yard bed to proper grade, Cum 150 camber/slope, rolling properly with (8~10)Ton road roller for proper compaction as per direction of the Engineer including cost of jhama brick chips and sand etc. all complete (Measurement will be given for compacted volume).
Providing compacted sub base with
(25mm~38mm) size Sylhet stone chips and sand (FM- 0.80) in proportion of (2:1) including local handling i.e. mixing of sand and stone chips in a stack yard or road/ yard bed to proper grade, 15 camber/slope, rolling properly with Cum 440 (8~10)Ton road roller for proper compaction as per direction of the Engineer including cost of stone chips and sand etc. all complete (Measurement will be given for compacted volume).
Single layer brick soling (76mm thick)
with 1st class well burnt brick including preparation of bed as necessary, filling and packing brick joints properly with 16 Sqm 8840 local sand with necessary cushion of sand below, supplying and laying of all materials etc. complete. as per direction.
Supplying and laying 0.20mm thick
polythin paper (with 150mm lapping) 17 below RCC and CC work etc. including Sqm 3025 cutting to proper sizes etc. as per direction. RCC work in pavement 305mm thick (excluding MS reinforcement) in proportion of (1:1½:3) with cement (OPC), sand (50% Sylhet sand + 50% local coarse sand) and 19mm down 18 Sqm 2900 Sylhet crushed stone chips including shuttering, mixing, pouring, using vibrator, surface finishing, 28 days curing etc. complete as per design, drawing and direction of Engineer.
Reinforced cement concrete (RCC)
work (excluding MS reinforcement) in proportion of (1:1½:3) with cement (OPC), sand (50% local + 50% Sylhet) (FM= 1.8) and Sylhet crushed stone chips (19mm down) in pavement, 19 Cum 150 check wall, drain, column, beam, roof slab, stairs, lintel, sunshade, bracing etc. including centering, shuttering, scaffolding and curing for 28 days complete as per direction in ground floor or height up to 4.88m.
Supplying and fitting fixing MS
deformed bar reinforcement of required sizes (minimum yield strength, fy= 60,000 psi) including fabrication, 20 Kg 152000 bending, binding with wire, erection, hooking etc. complete as per design and direction (No measurement for over lapping/ lapping).
Supplying and fitting fixing of 25mm
dia MS cap having length up to 260mm for dowel bars (excluding cost of dowel 21 bar) including filling the gap with Nos 360 bitumen/ grease etc. painting half portion of dowel bar etc. for expansion joint as per direction and design.
Extra rate of painting over dowel bars
or MS plain bars fitted and fixed as concrete pavement connector with two coats anti-corrosive epoxy paint after 22 Nos 3120 necessary preparation of surface, then lubricated with oil/ grease and finally placed firmly in proper position complete. Supply and fitting fixing 25mm thick cork sheet for provision of RCC 23 expansion joints including cost of all Sqm 110 materials and labour etc. as per direction.
Filling up expansion joints of concrete
24 pavement or bridge with bitumen and Rm 350 sand as per direction.
Filling up construction joints of
concrete pavement with sand and 25 bitumen mixture as per direction Rm 700 including necessary cleaning of the joints etc. complete.
Cement concrete in foundation, floor
etc. in proportion of (1:2:4) with cement, local coarse sand and 19mm 26 down jhama khoa including ramming, Cum 25 shuttering, curing etc. complete as per direction (3days curing for foundation and 21 days for floor).
Earth filling in plinth or side of trenches
with earth/ sandy soil available at site with necessary head lead including 27 Cum 5 leveling, dressing, watering, ramming etc. in 150mm layers complete as per direction.
1st class brick work with cement
mortar in proportion of (1:4) with 28 cement and sand in foundation and Cum 15 plinth including curing etc. complete as per direction.
13mm thick cement and sand plaster
(1:3) in floor including neat cement 29 Sqm 100 finishing, curing etc. complete as per direction.
Taking out old plaster from wall surface
30 including racking out joints, removing Sqm 80 debris etc. complete as per direction.
Supplying and fitting fixing of 102mm
dia GI pipe including necessary small fittings i.e, GI plain nipple, GI hex nipple, GI jum nuts, GI plugs, GI sockets 31 and laying the pipes on the top of the Rm 200 khoa consolidation layer, thread cutting, jute or lead wool packing complete as per direction (Excluding big fitting). Labour for taking out RCC slab of standard sizes from existing drain and 32 replacing the same after cleaning and Cum 5 repairing the drain as per direction (Excluding repairing cost).
Taking out rubbishes mixed with silt,
khoa, brick bats, stone chips etc. from 33 Cum 30 the bed of the drain including stacking the same as per direction.
MS work in ties and angles fitted and
fixed including cost of cutting into 34 proper sizes but excluding cost of Kg 170 welding, nuts, bolts etc. as per direction.
MS work such as base plate, clamp etc.
including cutting to proper sizes and 35 fitting-fixing in position as per direction Kg 750 (Excluding welding, making holes, nuts, bolts, rivets etc).
Welding charges to MS works such as
36 MS pipes, MS angles, MS flat bars etc. Rm 70 as per direction.
Spreading and thorough consolidation
of road metal including carrying the metal from road side stack, hand packing and consolidating the same 37 Cum 5 with (8~10)Ton roller true to camber and level including protecting the edges, watering and blinding with loamy soil etc. complete.
Carriage of materials such as sand,
debris, brick bats etc. including loading, 38 unloading, local carriage and carriage to a selected place by truck, push cart etc. as per direction.
a Up to 2(two) km by truck. Cum 4910
Carriage of heavy girders, RS joists,
trusses, bundle of CI sheet, wooden 39 fender etc. including loading, unloading and carriage to a selected places etc. as per direction.
a Up to 2(two) km by truck. Ton 6
Carriage of materials which are measured in tons such as cement, bundle less CI sheet, MS angle, MS 40 pipe, GI pipe etc. including loading, unloading and stacking as per direction.
a Up to 2(two) km by truck. Ton 4
Carriage of glass, released doors,
windows, pipes and other same 41 materials etc. including loading, unloading and carriage to a selected places etc. as per direction.
a Up to 2(two) km by small truck. Trip 1
Cleaning and dressing the site before
and after work inluding leveling, dressing, widding out grass, up-rooting 42 trees up to 150mm dia., cutting Item 1 jungles, bailing out water, removing all refuges etc. to a safe distance as per direction.