Lesson § + Running Tests
Running Tests Automatically
‘When you run an automated test, Quality Center automatically opens the
selected testing tool, which runs the test on your local machine or on
remote hosts, and imports the results to Quality Center.
Note that you can run all tests in a test set or run specific tests, You can run.
tests from the Execution Grid tab or the Execution Flow tab.
In this exercise, you will run an automated test from the Mercury Tours Site
test set.
Note: To perform this exercise, you must have QuickTest Professional or
WinRunner installed on your machine.
> Tointegrate Quality Center with QuickTest Professional, you must install
the HP QuickTest Professional Add-in and the HP Quality Center
Connectivity Add-in from the HP Quality Center Add-ins page
> To integrate Quality Center with WinRunner, you must install the
HP Quality Center Connectivity Add-in from the HP Quality Center
Add-ins page.
For more information, refer to the HP Quality Center Installation Guide
‘To run a test automatically:
1 Make sure the Test Lab module is displayed.
If the Test Lab module is not displayed, click the Test Lab button on the
sidebar.
Choose View > Test Sets Tree to display lest sels in the test sets tree
2 Display the Mercury Tours Site test set in the Execution Grid.
Click the Execution Grid tab.
In the test sets tree, expand the Cycle 1 - New Features test set folder under
Service Pack 1. Select the Mercury Tours Site test set.
101