CUPIAGUA CPF

Switchboard & Busbars

Function Test Certificate
AC-1 No.: HC-1 No.: Certs No.
FE-03
Sheet 1 of 1

AREA / LOCATION: SYSTEM:

P & ID No.: REV SERVICE:
DATA SHEET No.: REV TAG No.
MANUFACTURER: CERTIFICATION CLASSIFICATION:
MODEL No.: TYPE No.:
SERIAL No.: S.L.D.No.:
CIRCUIT No. SWB: CUBICLE REF.:

No. Check Description N/A Initial Date

1 Confirm switchboard earthing correct and measure the resistance of earth connections
Neutral Bar to Earth Frame to Earth Bar Earth Bar to Earth
Ohms Ohms Ohms
2 Measure and record Busbar insulation resistance, with bus section switches closed in
the service position.
R to Y+B Y to R+B B to R+Y R, Y, B, to N+E
M.Ohms M.Ohms M.Ohms M.Ohms
3 Bus Bar Pressure Test: HV Switchboards only
With all VT fuses removed and circuit breakers open in the test position and bus section
switches closed in the circuit position.
Record applied voltage ____________kV and time ____________ Minutes
Record leakage current:
R to Y+B Y to R+B R,Y,B, to E
mA mA mA
4 Repeat Busbar insulation resistance test following a pressure test as 3 above.
R to Y+B Y to R+B B to R+Y R,Y,B, to N+E
M.Ohms M.Ohms M.Ohms M.Ohms
5 Secondary/bus wiring insulation resistance to earth. ________ M.Ohms
Ensure all electronic components disconnected or shorted, protection relays withdrawn.
6 With switchboard energised measure and record busbar voltage, LV Only ________V
and confirm phase rotation RYB LV Only

7 Confirm tripping and closing supplies available, confirm voltage and polarity correct
and record voltage. Tripping supply ________ V Closing supply ________ V
8 Confirm anti condensation heater supplies available, confirm voltage and polarity
correct and record voltage. Heater supply ________ V
Confirm operation of anti condensation heaters and thermostats.
Record anti condensation heater load current, with all heaters energised. ________ A
REMARKS

Completed by Approved by Accepted by

(Technician) (Supervisor) (Completions)
COMPANY
SIGNATURE
PRINT NAME
DATE

Rev 01