Beruflich Dokumente
Kultur Dokumente
Specification
Sensor Type Silicon Sensor, Temperature Controlled to 46ºC
Operating Range 1 to 1000 ppm[V]. Other ranges available upon request
Resolution 1 ppm[V]
Stability ±1% of the operating range
Speed of Response Full scale ‘wet’ to ‘dry’ in <1 minute using Push Purge®
Sample Flow Rate Flow independent. Recommended 0.05 to 1 litre / min
Sample Gas Pressure Atmospheric vent
Display Backlit LCD presenting graphical data, digital value and
audit information. The display shows the last 15
minutes of the current measurement, and stores 100
measurements in the memory
ATEX Rating II 1G EEx ia IIC T4 Ta = -20ºC to +60ºC
Power Supply Rechargeable internal lead / acid battery
Diagnostics Push Purge® feature aids Sensor dry down, confirms
that the Sensor and electronics are operational and
highlights the presence of contamination. Push Purge®
confirms if the speed of response of the analyser is
maintained and validates readings on-line by removing
hysteresis before each measurement
Standard Calibration In ppm [V], traceable to National Standards
Operating Temperature -20 to +40°C.
Mounting Free-standing (portable) or rack-mount (on-line)
Weight 7kg (portable) / 3kg (on-line)
Tel: +44 (0)1937 844000 Fax: +44 (0)1937 849424 e-mail: sales@mcm-moisture.com www.mcm-moisture.com
Portable & On-Line Analysers • Transmitters • ATEX Systems • Custom Systems • Self-Calibrating & Self-Validating Systems • Dryers • Calibrations • Service • Consultancy