(MASTER COPY
“B26
SPECIFICATIONS
TECHNICAL RUBBER ARTICLES, SHEETS
RUBBER STOCK FOR SPECIAL MACHINES
AND ENGINES FOR THEM
TY 005 - 216 - 75
( Instead of Ty 38 105 1264 ~ 72 «
_ TY 138 105 003 = 73 )
(ea)
Transtated by | Authenticated by ARMOURED VEHICLE PROJECT
eS RueART F oo AVADL
Oat i
j—o2te | Comptes 5y SPECIFICATION No
26-592 | D-K -Suapay « E005 ~ 216 ~ 75
bo Page Ho itos 79
oy Approved bya Pen MES BT
& A) Specifications
echnical rubber articles, sheets and rubber stock
for special machines and engines for them.
‘TY 008 226 - 75
Instead of the specifications 38 105 1264 ~ 72 and
“TY 38 105 003 ~ 73,
Introduced for the duration :
0i+01.76 to 01.01.91.
These present specifications are applicable for ruber
technica articles, from here on wards reffered as Pr Ay H
(Rubber, rubber armoured, cubber Porous cloth) intended for
making up @ set of special machines ané engines for them, shecta
and rubber stock for manufacturing the specified Pr Ke
a
TY 005 216-75 om,
5 2
ie OF cone | sourint | eate t
vnTECHNICAL REQUIRENENTS
ists PEM and sheets should be in compliance with the
Yequirements ‘of,present specifications and drawings of
customer's plant ; upon agreenent with manufacturing plant
ana should be manufactired ae per technological regulations
“approved in an established order,
1.2. In the drawing on Pr,A, { the following should be
specified
Grade of material from which Prf,4 should be manufactured
Number of the present specifications ;
Surfaces for which higher requirements are given
(surface Py 7
Place and content of marking. (if required):
List of tests of Pry (if required).
1,3, Fittings for rubber metallic PERK should be in
complience with the drawings and technical requirements ‘
(appendix I).
1.4, bimit deviations of dimensions of Pr should be in
compliance with the requirements 1-15.
Note: Upon agreement between the supplier and customer, limit
deviations of dimensions previously agreed is allowed for the
series machines and spare parts, manufactured earlier.
ds4.1. Limit deviations of dimensions of packing rings are
specified in Table 1.
TY 005 216-75 ie
> [ae Teena orecanor [aaorae [oe]
ee