Beruflich Dokumente
Kultur Dokumente
lighting control
DESIGN
INSTALL
MAINTAIN
Vive
wireless
hub
The flexibility you need Wireless simplifies installation Maximize productivity and
to design your building and reduces callbacks building performance
Build your system from a full suite of products — Less wiring makes installation faster — reduce labor Monitor, adjust, and manage your system from The Vive wireless family gives you the
specify a simple occupancy sensor solution, or design a time by up to 70%1 any smart device — easily adjust the lighting control
right solution now and for years to come
fully integrated lighting management system using the to accommodate building churn, improve occupant
same suite of products
Setup is as simple as pushing a button or using comfort, and enhance energy efficiency
your smart device — no manufacturer commissioning
• Any budget
Combine individual fixture control and area control — required, further reducing time and labor cost (the Energy savings — lighting uses more electricity than any • Area, fixture and sensor controls
Vive wireless solutions do not limit your options Lutron services team is always available if you want other building system. Lutron solutions can save up to
some additional support) 60%2 or more of that lighting energy • Meet latest energy codes and standards
Easily match controls to the fixture package —
switching, 0-10V, phase control, EcoSystem, Start small and expand at any time — with no new Minimize down time — wireless controls install quickly • No factory setup required
or any combination wiring — meet budget requirements and changing to minimize disruption to building occupants
space needs When you choose Lutron solutions, you
Expand the system at any time — add control Expand capability — add new controls or upgrade software
options, add new areas, easily upgrade software liminate callbacks — Lutron’s proven reliability
E at any time without replacing the existing system
can be confident that the system just
to add new features helps you stay within budget and reduces your time works, and it will keep working.
on the job
Simpify integration — using BACnet protocol, connect
Guaranteed reliability and performance — provide with other building systems at the time of initial installation
flicker-free dimming down to 0.1% with Lutron Hi-lume or whenever you expand the system
Premier LED drivers. This end-to-end solution delivers
ultra-reliable operation and high performance
2 | Lutron Lutron | 3
For a list of sources please visit lutron.com/references. For a list of sources please visit lutron.com/references.
Scalable solutions — start small and grow Energy-saving control strategies
Vive wireless solutions offer a multi-strategy approach that accommodates your Combine lighting control strategies to maximize efficiency
budget and performance needs now, and for the future of your building.
hat is the savings opportunity?
W
Lutron solutions can save 60%3 or more lighting energy.
Potential savings
Single office Single Multiple Entire Plug load control automatically turns off loads 15 – 50%
after occupants leave a space. Controlled Load8
space floor floors building Appliance On Appliance Off
Start by adding Expand to new areas Duplicate the Vive offers seamless
control in a single or an entire floor at success of one floor integration to other
80%
High-end trim sets the maximum light level 10 – 30%
space and expand any time without across other floors building management based on customer requirements in each space. Lighting9
as budgets reprogramming or as your business systems to control every Max: 100% Max: 80%
4 | Lutron Lutron | 5
For a list of sources please visit lutron.com/references.
Transform existing buildings with wireless lighting controls
Centralized control
Remotes and integration
Occupancy and
daylight sensors
Lighting controllers
Wired/
Ethernet
Communication protocols
Integrated fixture
control and sensing
6 | Lutron Lutron | 7
Solutions for every space and budget DESIGN
Simple switching
Restroom
Occupancy sensors control all lights together
by switching lights on and off in response to
room occupancy.
Private office
Dim a group of lights together while also
providing manual control. Save additional
energy with daylight harvesting.
Open office
Reduce labor cost while maximizing energy Vive wireless solutions — Choose any load and control type
savings to give each occupant personal
dimming control — increase comfort and
Any control type Any load type
enhance productivity.
• High-performance
dimming with Lutron
Hi-lume EcoSystem
8 | Lutron Lutron | 9
Flexible installation INSTALL
Wallbox mount
• Replace an existing switch in a standard wallbox to
control a group of lights
• No new wiring required – works with the existing wiring
• Switching and dimming options available
• Communicates wirelessly to sensors and remotes
Wireless switch/dimmer
Ceiling mount
Ceiling mount
• PowPak modules mount on a standard junction box
in the ceiling to control a group of lights
• Saves installation time by eliminating wiring down
through walls
• Switching and dimming options available
• Communicates wirelessly to sensors and remotes
Vive-enabled fixtures
Vive-enabled fixtures
• Wireless control and sensing built into the fixture
at the factory
• Simple to design and estimate—just count the fixtures
• No additional wiring
– Works with existing high-voltage wiring,
regardless of room layout
– No new wiring between fixtures
• Provides personal control for each occupant to
maximize comfort and energy savings
• Communicates wirelessly to sensors and remotes
Integral fixture control
10 | Lutron Lutron | 11
For a list of sources please visit lutron.com/references.
Easy setup INSTALL
Simple setup and programming options with the Vive wireless hub For systems without a Vive wireless hub
Wireless dimmer
Occupancy sensor
12 | Lutron Lutron | 13
Save energy and improve building performance MAINTAIN
14 | Lutron Lutron | 15
Lutron security Lutron reliability
Clear Connect
16 | Lutron Lutron | 17
Lutron technology and tools Lutron service and support
XCT sensing technology Setup the system yourself, or choose the right mix of support services.
Lutron’s occupancy sensing won’t leave occupants in the dark and eliminates callbacks Lutron offers a variety of flexible, scalable support options to meet the needs of your project and your budget.
• Lutron sensors provide exceptional prevention of false-ons and false-offs
• Superior sensitivity—recognizes the difference between fine human motion and background noise
Vive is designed to make If you’re looking for some extra If you prefer, the Lutron Services
installation and setup easy. peace of mind, Lutron Services Team can execute the full
Instructions are included with the can be purchased in flexible blocks system setup.
Major Motion Minor Motion product, and comprehensive, of time to provide just the right
Both remote and onsite setup
online help is available 24/7 on amount of support.
services are available. Remote
Person walking 3 feet Movements like extending our arms Lutron.com/ViveResources.
The Services Team can provide startup is generally a lower cost
Simple-to-follow videos and training, walk you through setup option and requires less lead time.
product guides are just a for a specific project area, answer
Remote setup — a designated
click away. any other questions you have, or
member of your team works with
help finish setup by closing
an off-site, Lutron-certified remote
punch-list items.
technician.
Choose from remote (online or Onsite setup — a Lutron-certified
phone-based) setup support, or service technician will perform
have a Lutron Service Technician the complete system setup at
come to your site. your project site.
If you are not sure what kind of support you need, Lutron can help.
Contact your local Lutron sales representative to discuss your project.
18 | Lutron Lutron | 19
The benefits: Simple to design Easily meet code
Access to tools and resources is at your fingertips. Summary of code requirements for lighting control
Exclusive access and quick answers keep your project moving. Vive wireless solutions ensure you can meet new construction and retrofit (lighting alterations12)
code requirements for ASHRAE 2010, ASHRAE 2013, IECC 2012, IECC 2015, and Title 24-201613.
For specific commercial building code lighting requirements in your state, please visit
Designer+ for Vive www.lutron.com/energycodes.
Lutron Designer+ for Vive is an intuitive, easy-to-use software tool
that allows you to design a Lutron Vive lighting control system with
visual “drag and drop” layout and connections. It also allows you to
generate comprehensive system design documentation, including
bills of materials, one-line diagrams, and sequence of operations. Vive Solutions
ions
Vive Solut
ions
Codes can often be complicated and difficult to navigate. We have commercial
Vive Solut
Commerc
Code Com
ial Applicatio
pliance
n Guide
| Lighting
Controls
Commerc
Code Com
IECC 201
ial Applicatio
pliance
n Guide
| Lighting
Cont rols
application guides that include examples of different spaces and corresponding
5
Lutron products for those spaces. Guides show you how you can use Lutron
2
IECC 201
Line-voltage
Conference
wiring
ASHRAE
Room | New Constr
90.1-2010
uction
by Low-voltage
wiring
uction
| New Constr
DZ 1 DZ 1 DZ 1
Break Room
2 2 2
Clear Connect
RF Communication
90.1-2010 Line-voltage 1 by
ASHRAE wiring DZ 1 =
Daylight Zone
Low-voltage Line-voltage
wiring 1 2 2 2 DZ 1
wiring
DZ 1
Clear Connect DZ 1
RF Communication Low-voltage
1 wiring
Clear Connect
2 2 2 RF Communication
1 2 DZ 1 & DZ
Daylight 2 =
Zones
DZ 2
DZ 2
DZ 2
Specifying wireless lighting control reduces design time and allows flexibility for changes
Symbol Model Number Description Qty
RMJS-8T-DV-B PowPak dimming module with 0-10 V 3
during the project without the need to redesign. Vive Wireless Specification Typicals allow
PJ2-3BRL- Pico wallbox
adapter Occupant Enters: Open Offi PICO-WBX Pico wireless
Lights do not automatically turn on when an occupant enters the space; ce must
lights | New
be turned -ADAPT 3-button
with raise/lower 1
-ADAPT by light level is set to 80%. ASHRAE Construction Pico wallbox control
PICO-WBX
Construction
on manually. Maximum 90.1-2010 Control Functio adapter
| New nality
2
Corridor
When Occupied:
nality turned on Occupant
A
light level for all lights.
Line-voltage
: 80%. space; lights
I
manually. : Overhead turned
to set desired Manual:
DZ 1
: Occupant lights dim/bright
When Occupied uses wall dimmer
DZ 1 Low-voltage
exit.
Add a Vive wireless hub to enable simple setup and re-zoning, system monitoring, timeclock DZ 1
Occupant
wiringuses
wall dimmer en based on daylight
Occupant functionality, and advanced integration. Exits: to set desired availability.
Manual: after all occupants All lights light levels There
15 minutes automatica for all lights. are two perimeter
Clear Connect
Exits: , timeclock
lly turn off
RF Communication
Occupant lly turn off
system monitoring
Co., Inc.
daylight zones.
REV A
15 minutes
for quick and easy design of many applications. Simply copy and paste the typicals into
automatica
All lights and re-zoning, DZ 1 = after all occupants
simple setup Add a Vive Daylight Zone
I P/N 368-4600
Code Notes: For non-daylight classrooms, all general lighting can be connected to a single 0-10 V dimming module. exit.
hub to enable
Lutron Electronics
. To emergency
power
wireless
wireless Receptacle Control is required for Shop and Laboratory classrooms. functionali hub to enable
Add a Vive and advanced integration ty, and advanced
Connect
Clear
Want to add a Vive
RF Communication
wireless hub for more features? Go to lutron.com/vive for complete compatibility and design details. simple setup
y, This solution requires 0-10 V enabled ballasts and drivers by others. integration and re-zoning,
functionalit Low-voltage . system monitoring
Co., Inc.
wiring
Line-voltage
wiring , timeclock
© 03/2017
For non-daylight
Lutron Electronics
Want to conference
sensor. add rooms the
zone and
a daylight details. This solution a Vive wireless hub lighting can
module per and design requires for be connected
compatibility 0-10 V enabledmore features? to a
0-10 V dimming e for complete Qty ballasts and Go to lutron.com/vivsingle 0-10 V dimming
include a
rooms with
daylight, Go to lutron.com/viv Symbol drivers by
others.
e for complete module.
compatibility
For break features? others. 1
for more drivers by Description Model Number and design
Code Notes:a Vive wireless hub
© 03/2017
add ballasts and details.
Want to 0-10 V enabled 0-10 V RMJS-8T-D
module with
requires
solution 1 V-B
Model Number
This
dimming PowPak Description
PowPak RMJS-20R- dimming
Symbol hallway
A
All lights adjust, or light level
REV A
minimum Exits:
Occupant lly go to
Co., Inc.
All lights light levels There
All lights
automatica
on to full
output. automatica for all lights. is one perimeter
I P/N 368-4603
off 15 minutes lly turn off daylight
y Mode: power turns after all occupants 15 minutes zone.
Lutron Electronics
Emergenc to emergency after all occupants
connected exit. exit. 50%
Lighting of all receptacle
Add a Vive
wireless s automatica
Co., Inc.
functionalit
provide an hub to enable lly turn
UL 924 compliance, zones. y, and advanced simple setup
© 03/2017
that require corridors with daylight integration and re-zoning,
Lutron Electronics
projects Code Notes:
signal. For a daylight sensor
for
Want to For non-daylight . system monitoring
loss of control Add design details. add open offi
output upon to emergency fixtures.compatibility and This solution a Vive wireless hub ces, all general , timeclock
go to full for requires lighting can
the egress
fixtures connected e for complete 0-10 V enabledmore features? be
Verify that per load
controller
Go to lutron.com/viv ballasts and Go to lutron.com/vivconnected to a single
Code Notes: control relay (ALCR) more features? others. drivers by e for complete 0-10 V
load for drivers by others. compatibility dimming module.
automatic a Vive wireless hub
© 03/2017
add ballasts and and design
Want to 0-10 V enabled details.
requires
This solution
Vive training
Visit Lutron.com/LCIOnline —Sign up for free, online training
modules with practice exercises that walk you through the
Vive system.
20 | Lutron Lutron | 21
For a list of sources please visit lutron.com/references.
Vive Wireless hub
wireless hub
Clear Connect technology (range radius of 71 ft [22 m]) of the Vive wireless hub and must be on the same floor as the Vive wireless hub.
• Distributed system architecture
- Pico remote controls and sensors communicate directly with the load
devices they control and must be located within 30 ft (9 m)
of the device with which they are associated Conference Room
PowPak Dimming Module
• Supports timeclock events based on both sunrise and sunset
or fixed time-of-day
Vive Hub
RF coverage
• Integrated multi-color LED provides feedback on what mode
the hub is in Private Office
Maestro Wireless
Vive wireless hub • Two contact closure Inputs for integration with devices by others Dimmer 30 ft (9 m) 30 ft (9 m)
including devices for Title 24 Automatic Demand Response Maximum Maximum
Dimensions
• Each hub provides an individual dashboard for its coverage area and
W: 6.5" (165 mm)
allows you to link to other hub dashboards from the mobile application
H: 1.5" (38 mm)
71 ft (22 m)
D: 2.8" (71 mm) Maximum
Product options
30 ft (9 m) 30 ft (9 m)
Vive wireless hub models Maximum Maximum
Standard
Open Office
Note: A minimum distance of 10 ft (3 m) between Vive wireless hubs on the PowPak Radio Powr Savr
Fixture
same floor is required. Control Daylight Sensor
Note: A corporate Wi-Fi network can interfere with the Wi-Fi on the Vive 100 ft (30 m)
Note: Pico remote controls and sensors must be within
wireless hub. Where a corporate Wi-Fi network exists, it is recommended 30 ft (9 m) of the load device they are controlling
to do one of the following: 1) Connect to the Vive wireless hub and change
the Wi-Fi channel to one that isn’t used by the corporate network or
2) Connect the Vive wireless hub to the corporate network using the
Ethernet connection on the hub, and disable the hub’s Wi-Fi.
Note: Vive wireless hub must be mounted a minimum of 10 ft (3 m) from a
Wi-Fi router or access point.
22 | Lutron Lutron | 23
Load Controllers: J-box mounted switches and dimmers
PowPaks
W: 2.89" (48 mm) • Contact closure output
Dimensions
H: 3.44" (87 mm) For sending occupancy information to third-party equipment such W: 2.89" (48 mm) Product options
D: 1.25" (32 mm) as HVAC systems H: 3.44" (87 mm)
D: 1.25" (32 mm) 8 A models with 0-10 V control
• Input 120/277 V
RMJS-8T-DV-B
Product options
16 A models
RMJS-16R-DV-B
5 A models
RMJS-5R-DV-B
24 | Lutron Lutron | 25
Load Controllers: J-box mounted switches and dimmers
Product options
Cooling Supply
Standard Filter coil fan
PowPak contact
RMJS-CCO1-24-B Contact closure output C
closure output module
Dimensions
PowPaks
W: 2.89" (48 mm) C
H: 3.44" (87 mm) Note: If using a relay module with the contact closure output, you do
D: 1.25" (32 mm) not need to add a contact closure output module unless a second
contact closure output is needed VAV Damper open VAV Damper closed
Occupied Unoccupied
26 | Lutron Lutron | 27
Load Controllers: Plug load control
PowPaks
W: 2.89" (48 mm)
H: 3.44" (87 mm) General purpose switch
RMJS-20RCCO1-DV-B
D: 1.25" (32 mm) 20 A, 120-277 V receptacles
with one contact closure output
20 A 20 A
Occupied Unoccupied
28 | Lutron Lutron | 29
For a list of sources please visit lutron.com/references.
Load Controllers: Plug load control
One wireless receptacle can also control standard The occupancy/vacancy sensor wirelessly communicates room occupancy to the wireless receptacle.
receptacles wired downstream Based on the occupancy status received, the wireless receptacle switches the power on or off, reducing the
amount of energy consumed. The wireless receptacle will control normal receptacles downstream.
• Input 120V
RF receptacle with
top controlled
Product options
15 A models
Dimensions
W: 2.94" (75 mm) CAR2S-15-STR - 15 A
Split (half switching;
H: 4.69" (119 mm) single pole/downstream)
D: 1.4" (36 mm)
CAR2S-15-DTR - 15 A Duplex (dual switching;
single pole/downstream)
20 A models
CAR2S-20-STR - 20 A
Split (half switching;
single pole/downstream)
CAR2S-20-DTR - 20 A
Duplex (dual switching;
single pole/downstream)
20 A 20 A
Occupied Unoccupied
30 | Lutron Lutron | 31
For a list of sources please visit lutron.com/references.
Load Controllers: Wireless individual fixture control
PowPaks
Dimensions Sensor Dimensions 0-10 V control models
W: .827" (21 mm) DFCSJ-OEM-RF Clear Connect (RF) only W: 2.89" (48 mm)
FCJS-010
H: 2.477" (62.9 mm) H: 3.44" (87 mm)
Clear Connect (RF) and Occupancy/
DFCSJ-OEM-OCC D: 1.25" (32 mm)
FCJS-010-BULK8 8-pack
Daylight Sensing
Dimensions
with Occupancy/Daylight Sensor ontact your local fixture representative and ask for a Vive-enabled
C
EcoSystem control models
W: .927" (23.5 mm) fixture or visit lutron.com/findafixture
H: 2.577" (65.4 mm) Note: Wireless sensors and controls must be located within 60 ft (18 m)
How it works FCJS-ECO
line of sight, or 30 ft (9 m) through walls of each other.
Install the fixture control directly to a FCJS-ECO-BULK8 8-pack
fixture or on a junction box nearest
to the fixture. Install the sensor on the
Clear Connect (RF) + Sensing ceiling near the fixture to optimize
Sensor models
coverage in the desired area.
30 ft (9 m) 0
Maximum
Floor 3 ft
Link
(0.9 m)
15 ft 9 ft 3 ft 3 ft 9 ft 15 ft
Test
6.9 ft
Pico
0 (2.1 m)
Pico Remote Control Radio Powr Savr Radio Powr Savr Remote
Control (4.6 m) (2.7 m) (0.9 m) (0.9 m) (2.7 m) (4.6 m)
(up to 10) occupancy sensor daylight sensor
9 ft
(2.7 m)
(up to 10) (1 maximum) 300 ft (28 m ) major motion
2 2
32 | Lutron Lutron | 33
Load Controllers: In-wall switches and dimmers
Switch/Dimmers
600 W incandescent/halogen,
Dual Voltage No Neutral switches 600 VA MLV, 120 V, no neutral
MRF2S-8S-DV-XX
8 A lighting, 1/10 HP fan @ 120 V only, MRF2S-6ELV-XX 600 W ELV, 120 V
120-277 V, no neutral
MRF2S-6ND-120-XX 600 W/VA incandescent/halogen/
MLV, 120 V
120 V Neutral required switches MA-R-XX Accessory dimmer for multi-location
lighting controls, 120 V
MRF2S-6ANS-XX 6 A lighting, 1/10 HP fan, 120 V only
34 | Lutron Lutron | 35
Remotes: Pico wireless remotes
ON/OFF control
• Pedestal mount for tabletop use
•
Select one 3-button Pico wireless remote to add a location with
Pico wireless remotes ON/OFF control and one preset • Surface mount anywhere with Claro wallplate
3-button 3-button 3-button •
Select one 2-button with raise/lower Pico wireless remote to add a 10-year battery life
•
with raise/ nightlight location with ON/OFF and BRIGHTEN/DIM control
lower with raise/ •
Select one 3-button with raise/lower Pico wireless remote to add a
lower
location with ON/OFF, BRIGHTEN/DIM control and one preset
•
Select whether a nightlight is needed (2-button and 3-button with
raise/lower only)
Note: Spaces with a PowPak relay or dimming module will not have
a local control in the room unless a Pico is added
Pico remote
H: 2.60" (66 mm)
D: 0.33" (8 mm) PJN-2B-GXX-L01 Nightlight 2-button wireless remote
PJ2-3BRL-GXX-L01
3-button with raise/lower
wireless remote
Pico remote
Button Marking Codes Engraving Engraving
Zone Control
Lights -L01 -EL1 Product options
Shades -S01 -ES1 Wall-mount accessories
Scene Control
PICO-WBX-ADAPT Pico wallbox adapter
Lights -L31 -EL2
Shades -S31 -ES2 CW-1-WH Claro 1-gang wallplate
Wall-mount accessories
Pico wallplate adapter and Claro wallplate
Dimensions
W: 2.94" (75 mm)
H: 4.69" (119 mm)
D: 1.44" (38 mm)
38 | Lutron Lutron | 39
Sensors: Ceiling occupancy/vacancy sensors
Top view
Accessories
L-CMDPIRKIT Ceiling-mount sensor lens masking kit
9 ft 6 ft 3 ft 0 ft 3 ft 6 ft 9 ft
(2.7 m) (1.8 m) (0.9 m) (0 m) (0.9 m) (1.8 m) (2.7 m)
9 ft 6 ft 3 ft 0 ft 3 ft 6 ft 9 ft
(2.7 m) (1.8 m) (0.9 m) (0 m) (0.9 m) (1.8 m) (2.7 m)
Sensors
Ceiling-mount sensor coverage chart (for sensor mounted in center of room)
Maximum room dimensions Radius of coverage
Ceiling height for complete floor coverage at floor
8 ft (2.4 m) 18 x 18 ft (5.5 x 5.5 m) 324 ft2 (30.2 m2) 13 ft (4.0 m)
9 ft (2.7 m) 20 x 20 ft (6.1 x 6.1 m) 400 ft2 (37.2 m2) 14.5 ft (4.4 m)
10 ft (3.0 m) 22 x 22 ft (6.7 x 6.7 m) 484 ft2 (44.9 m2) 16 ft (4.9 m)
12 ft (3.7 m)** 26 x 26 ft (7.9 x 7.9 m) 676 ft2 (62.4 m2) 19 ft (5.8 m)
* Sensor mounting shown at 7 ft (2.1 m). Mounting height should be between 6 and 8 ft (1.6 and 2.4 m).
** 12 ft (3.7 m) is the maximum mounting height allowed.
40 | Lutron Lutron | 41
Sensors: Wall-/Hall-/Corner-mount occupancy/vacancy sensors
Corner-mount sensors 15 ft
(4.6 m)
LRF2-OKLB-P-WH Occupancy/vacancy
0 ft
(0 m)
0 ft 35 ft 50 ft
(0 m) (10.7 m) (15.2 m)
LRF2-VKLB-P-WH Vacancy only Hallway*, long narrow field of view
Coverage varies by hallway width and length
Flexible armature mounting kit Hallway sensors Top view
Sensors
LRF-ARM-WH
Flexible armature mounting kit for Radio
Powr Savr wall, hall, corner sensors Hallway sensor maximum recommended length chart
(sensor centered within hallway)
Wire cage guard L-WIRECAGE-C Wire guard for ceiling-mount sensor
Dimensions Width of hallway Length of hallway
L-WIRECAGE-W Wire guard for in-wall sensor
W: 7.0" (178 mm) 6 ft (1.6 m) or less 50 ft (15.2 m)
H: 5.75" (146 mm)
8 ft (2.4 m) 100 ft (30.5 m)
D: 4.5" (114 mm)
10 ft (3.0 m) or more 150 ft (45.7 m)
* Sensor mounting shown at 7 ft (2.1 m). Mounting height should be between 6 and 8 ft (1.6 and 2.4 m).
** 12 ft (3.7 m) is the maximum mounting height allowed.
42 | Lutron Lutron | 43
Sensors: Daylight sensors
Bottom of sensor
Locati
Bottom of sensor (corrid
Location for narrow areas Locati
Arrow
(corridors, private offices) by the
(corrid
Arrow points towards the area viewed by the
sensor (away from window).
(away
Arrow f
Sensors
by the
(away f
44 | Lutron Lutron | 45
Lutron service solutions
when you need them during the construction timeline us do the setup for you.
• Choose the amount of time you need • Includes a Commercial System Limited Warranty
Service Solutions
LSC-SPV-DOC System performance—
verification documentation
46 | Lutron Lutron | 47
Lutron service solutions Vive Warranty & Technology Support
Commercial System
Support Options Limited Warranty Silver (TSP) Gold (TSP) Platinum (TSP)
Duration up to 10 years of coverage • • •
100% Replacement Parts • (5 yrs) • • •
Service Solutions
Diagnostic Labor— First Available Response • (2 yrs) •
Diagnostic Labor— 72-Hour Response •
Diagnostic Labor — 24-Hour Response •
Annual Preventive Maintenance Visit • •
48 | Lutron Lutron | 49
Ordering Information
Model Number Description List Price (US) Model Number Description List Price (US)
HJS-1-FM Standard Vive wireless hub, flush mount CAR2S-15-DTR 15 A Duplex (dual switching; single pole/downstream, 120 V 170.00
Contact Lutron
HJS-1-SM Standard Vive wireless hub, surface mount sales for a quote CAR2S-20-STR 20 A Split (half switching; single pole/downstream, 120 V 190.00
HJS-2-FM Premium Vive wireless hub, flush mount CAR2S-20-DTR 20 A Duplex (dual switching; single pole/downstream, 120 V 190.00
HJS-2-SM Premium Vive wireless hub, surface mount
Maestro Wireless switches*
PowPak relay module MRF2S-6ANS-XX 6 A lighting, 3 A fan (1/10 HP motor), 120 V 108.00
RMJS-5R-DV-B 5 A relay 109.00 MRF2S-8S-DV-XX 8 A lighting, 3 A fan (1/10 HP motor, 120 V only), spec grade 170.00
RMJS-5RCCO1-DV-B 5 A relay with one contact closure output 124.00 MRF2S-8ANS-120-XX 8 A lighting, 5.8 A fan (1/4 HP motor), spec grade, 120 V 140.00
RMJS-16R-DV-B 16 A relay 129.00
RMJS-16RCCO1-DV-B 16 A relay with one contact closure output 144.00 Maestro Wireless dimmers*
MRF2S-6CL-XX 150 W dimmable CFL/LED, 600 W incandescent 108.00
PowPak dimming module with 0-10 V control halogen, 600 VA MLV, 120 V, no neutral
MRF2S-6ELV-XX 600 W ELV, 120 V 209.00
RMJS-8T-DV-B Controls up to 8 A of 0-10 V controlled fixtures 150.00
MRF2S-6ND-120-XX 600 W/VA incandescent/halogen/MLV, 120 V 150.00
DFCSJ-OEM-OCC* Vive Integral Fixture Control (with Sensing) 70.00 S Light Almond (LA) Turquoise (TQ) Taupe (TP) Desert Stone (DS)
S Gray (GR) Sea Glass (SG) Eggshell (ES) Stone (ST)
* Contact your local fixture representative and ask for a Vive-enabled fixture S Brown (BR) Midnight (MN) Biscuit (BI) Limestone (LS)
or visit lutron.com/findafixture Fixture adders may vary. S Black (BL) Sienna (SI) Snow (SW)
50 | Lutron Lutron | 51
Ordering Information
Model Number Description List Price (US) Model Number Description List Price (US)
PJ2-2BRL-GXX-L01 2-button with raise/lower 25.00 LRF2-OCR2B-P-WH Ceiling-mount, 360° field-of-view, occupancy/vacancy sensor 85.00
PJ2-2B-GXX-L01 2-button 25.00 LRF2-OWLB-P-WH Wall-mount, 180° field-of-view, occupancy/vacancy sensor 85.00
PJN-2B-GXX-L01 Nightlight 2-button 58.00 LRF2-OKLB-P-WH Corner-mount, 90° field-of-view, occupancy/vacancy sensor 85.00
PJ2-3BRL-GXX-L01 3-button with raise/lower 21.00 LRF2-OHLB-P-WH Hallway, occupancy/vacancy sensor 85.00
PJ2-3B-GXX-L01 3-button 25.00
PJN-3BRL-GXX-L01 Nightlight 3-button with raise/lower 58.00 Occupancy/vacancy sensor accessories
PJ2-4B-GXX-L21P 4-button with 2 group control 39.00
L-CMDPIRKIT Sensor lens masking kit for Radio Powr Savr ceiling sensor 11.80
PJ2-4B-GXX-L01 4-button with zone control 25.00
L-CRMK-WH Recess-mounting bracket for Radio Powr Savr ceiling sensor 17.00
PJ2-4B-GXX-L31 4-button with scene control 39.00
LRF-ARM-WH Flexible armature mounting kit for Radio Powr Savr 59.00
* (XX in the model number represents color/finish code; price shown is for white (WH) models only.) wall, hall, corner sensors
Price for other colors varies. L-WIRECAGE-WBX Wire guard for in-wall sensor, White 65.00
L-WIRECAGE-C Wire guard for ceiling-mount sensor, White 65.00
Pico accessories L-WIRECAGE-W Wire guard for wall-mount and hallway sensors, White 65.00
52 | Lutron Lutron | 53
Ordering Information
Standalone
LSC-OS-SU-VIVE Onsite full-scope startup
Standalone
Remote programming —8-hour block
LSC-RMT-PROG8-SP
Contact Lutron
LSC-PREWIRE Prewire visit
sales for a quote
LSC-TRAINING Customer-site solution training
LSC-AF-VISIT
LSC-WALK
Onsite scene and level tuning
54 | Lutron Lutron | 55
In-wall: Occupancy/vacancy switches Standalone Solutions
Standalone
•
Lutron XCT technology for superior sensitivity prevents false • L
utron XCT technology greatly enhances the performance
ons and false offs of dual-technology sensors, enabling them to detect very
fine motion like typing
• Automatically turns lights off when space is unoccupied
• Automatically turns lights off when space is unoccupied
• Easy to install; directly replaces an existing control
• Easy to install; directly replaces an existing control
•
Lutron's Smart Ambient Light Detection learns your
Maestro sensor Maestro dual-technology Lutron's Smart Ambient Light Detection learns your preferences
preferences over time and adapts accordingly •
sensor switch over time and adapts accordingly
Dimensions •
Lutron’s Adaptive Zero-Cross Switching extends relay lifetime
Dimensions • Lutron’s Adaptive Zero-Cross Switching extends relay lifetime
W: 2.94" (75 mm) • 180° sensor field-of-view; must have unobstructed view
H: 4.69" (119 mm) W: 2.94" (75 mm) • 180° sensor field-of-view; must have unobstructed view
D: 1.44" (38 mm)
•
Up to 900 ft2 major motion coverage and 400 ft2 minor H: 4.69" (119 mm)
motion coverage • Up to 900 ft2 major motion coverage and 400 ft2 minor
D: 1.44" (38 mm)
motion coverage
• Adjustable timeout—1, 5, 15, 30 minutes
• Adjustable timeout—1, 5, 15, 30 minutes
•
Vacancy/partial-on models available to meet
CA Title 24 requirements
• Vacancy models available to meet CA Title 24 requirements
•
Dual-circuit sensors provide bi-level control of two circuits, as
• Dual-circuit sensors provide bi-level control of two circuits, as
required by specific energy codes required by specific energy codes
"O" in the model number with a "V". before the color code (XX). circuit; 3-way, neutral required
56 | Lutron Lutron | 57
In-wall: Occupancy/vacancy switches Standalone Solutions
Standalone
•
Lutron XCT technology for superior sensitivity • C•L dimmer for control of screw-based CFLs and LEDs
prevents false ons and false offs
• Automatically turns lights off when space is unoccupied
Product options
• Easy to install; directly replaces an existing control
C•L dimmer sensor†
•
Lutron's Smart Ambient Light Detection learns your
In-wall PIR occupancy/ C•L dimmer sensor†
preferences over time and adapts accordingly MSCL-OP153M-XX •L dimmer with PIR sensor;
C
vacancy sensor switches
• 180° sensor field-of-view; must have unobstructed view Dimensions occupancy/vacancy;
Dimensions multi-location/3-way/single pole;
•
Up to 900 ft2 major motion coverage and 400 ft2 minor W: 2.94" (75 mm)
W: 2.94" (75 mm) 150 W CFL/LED,
motion coverage H: 4.69" (119 mm)
H: 4.69" (119 mm) 600 W incandescent/halogen
D: 1.44" (38 mm)
D: 1.44" (38 mm) • Adjustable timeout—1, 5, 15, 30 minutes
•
Vacancy models available to meet CA Title 24 * (XX in the model number represents color/finish code; use WH for White;
requirements please visit www.lutron.com for other color choices.) See Maestro
colors on page 49.
• Select from up to 27 colors to complement the décor* †
Vacancy-only models available.
Replace the “O” in the model number with a “V”.
‡
For dual-tech or 0-10 V vacancy models,
Add “-V-” before the color code (XX).
Product options
0-10 V dimmer sensor‡
Sensor coverage diagrams
MS-Z101-XX
8 A lighting 120-277 V; occupancy/
vacancy; multi-location/3-way/single pole
In-wall
Controls electronic LED drivers and fluorescent ballasts PIR beam diagram
• Miswire and load incompatibility alert —lens will (for reference only)
flash red if control is miswired or connected to an
incompatible fixture
• Selectable dimming curve optimizes performance of
0-10 V LED drivers
•
Lutron’s Adaptive Zero-Cross Switching extends relay lifetime
(1.5 m)
(1.5 m)
(9 m)
(6 m)
(6 m)
(3 m)
(3 m)
(9 m)
30 ft
30 ft
20 ft
20 ft
10 ft
10 ft
(6 m)
(6 m)
(3 m)
(3 m)
10 ft
10 ft
5 ft
20 ft
5 ft
20 ft
0
0
* (XX in the model number represents color/
finish code; use WH for White; please
visit www.lutron.com for other color
* Sensor mounting shown at 7 ft (2.1 m). Mounting height should be between 6 and 8 ft (1.6 and 2.4 m).
choices.) See Maestro colors on page 51.
†
Vacancy-only models available. Replace the
"O" in the model number with a "V".
58 | Lutron Lutron | 59
Model number Description List Price (US) Notes
Sensor switches *
MS-OPS2-XX 2 A lighting, 120 V PIR occupancy/vacancy; single pole,
no neutral 29.00
MS-OPS5M-XX 5 A lighting, 120 V PIR occupancy/vacancy; 3 A fan,
multi-location/3-way/single pole, no neutral 41.50
MS-OPS6M2-DV-XX 6 A lighting, 120-277 V PIR occupancy/vacancy, 3 A fan
(120 V only); no neutral 53.00
MS-OPS6M2N-DV-XX 6 A lighting, 120-277 V PIR occupancy/vacancy, 3 A fan
(120 V only); neutral required 53.00
MS-OPS6M2U-DV-XX 6 A lighting, 120-277 V PIR occupancy/vacancy, 3 A fan
(120 V only); configurable ground or neutral wire 54.00
Dual-circuit sensor switches *
MS-OPS6-DDV-XX 6 A lighting per circuit, 120-277 V PIR dual-circuit occupancy/
vacancy; 4.4 A fan (120 V only) per circuit; single pole 89.00
MS-PPS6-DDV-XX 6 A lighting per circuit, 120-277 V PIR dual-circuit partial-on
occupancy/vacancy, 4.4 A fan (120 V only) per circuit; single pole 89.00
Dual-technology sensor switches **
MS-A102-XX 6 A lighting, 120-277 V dual-tech occupancy/vacancy sensor,
4.4 A fan (120 V only); single pole, no neutral 100.00
MS-B102-XX 6 A lighting, 120-277 V dual-tech occupancy/vacancy sensor,
4.4 A fan (120 V only); multi-location/3-way, neutral required 100.00
Dual-technology dual-circuit sensor switches * *
MS-A202-XX 6 A lighting per circuit, 120-277 V dual-tech occupancy/vacancy,
4.4 A fan (120 V only) per circuit; single pole, no neutral 125.00
MS-B202-XX 6 A lighting per circuit, 120-277 V dual-tech occupancy/
vacancy sensor, 4.4 A fan (120 V only) per circuit;
3-way, neutral required 125.00
Sensor dimmers * *
MS-Z101-XX 8 A lighting 120-277 V; occupancy/vacancy; multi-location/
3-way/single pole 110.00
MSCL-OP153M-XX C L dimmer with PIR sensor; occupancy/vacancy;
•
60 | Lutron Lutron | 61
62 | Lutron Lutron | 63
For a list of all Vive wireless solutions Questions?
product model numbers and pricing call us
see lutron.com/vive 1.844.588.7661
lutron.com
Lutron Electronics Co., Inc., 7200 Suter Road, Coopersburg, PA 18036-1299
Customer Assistance
Online: lutron.com/help
Email: support@lutron.com
Phone: 1.844.LUTRON1 (588.7661) — includes 24/7 technical support
I
© 7/2017 Lutron Electronics Co., Inc. P/N 367-2597 REV F