Beruflich Dokumente
Kultur Dokumente
AU OPTRONICS CORPORATION
Checked &
Date Prepared by Date
Approved by
Sandy Su 04/18/2016
Contents
1. Handling Precautions.................................................................... 4
2. General Description ..................................................................... 5
2.1 General Specification..........................................................................................................5
2.2 Optical Characteristics........................................................................................................6
3. Functional Block Diagram............................................................ 10
4. Absolute Maximum Ratings.......................................................... 11
4.1 Absolute Ratings of TFT LCD Module .............................................................................. 11
4.2 Absolute Ratings of Environment .................................................................................... 11
5. Electrical Characteristics ............................................................. 12
5.1 TFT LCD Module ................................................................................................................. 12
5.1.1 Power Specification ....................................................................................................... 12
5.1.2 Signal Electrical Characteristics ................................................................................... 13
5.2 Backlight Unit...................................................................................................................... 14
6. Signal Interface Characteristic ..................................................... 15
6.1 Pixel Format Image ........................................................................................................... 15
6.2 The Input Data Format...................................................................................................... 16
6.3 Signal Description .............................................................................................................. 17
6.4 Interface Timing (LVDS) .................................................................................................... 18
6.5 Power ON/OFF Sequence................................................................................................ 19
7. Connector & Pin Assignment ........................................................ 20
7.1 TFT LCD Module ................................................................................................................. 20
7.2 Backlight Unit...................................................................................................................... 20
8. Panel Reliability Test ................................................................... 22
9. Shipping and Package ............................................................... 23
9.1 Shipping Label Format...................................................................................................... 23
9.2 Carton Package................................................................................................................ 23
9.3 Shipping Package of Palletizing Sequence .................................................................. 24
10. Handling guide ........................................................................ 25
11 .Mechanical Characteristics........................................................ 27
11.1 LCM Outline Dimension (Front View)............................................................................ 27
11.2 LCM Outline Dimension (Rear View) ............................................................................ 28
Record of Revision
Version
Page Old Description New Description Remark
and Date
0.0 st
All 1 Edition for Customers
2015/05/15
Luminance Uniformity: TBD Delete
Contrast Ratio: 500:1 700:1
5 LCD Power Consumption: 3.76 3.37
LED Power Consumption: 10.6 10.5
Weight: TBD 940 (Typ.) 1100 (Max.)
Support Color: 16.2M (6-bits +2FRC) 16.7M (RGB 8-bits)
Viewing Angle R/L/U/L:
Min.60/60/45/50;Typ.70/70/60/60 Min.70/70/60/60;Typ.80/80/70/70
6 Luminance Uniformity 5 Points:TBD Update 9 point: Min.62; Typ.70
13 Points: TBD Delete
Contrast Ratio: Min.400; Typ.500 Min.500; Typ.700
Color Coordinates: TBD Value
1.0
2016/04/18 Power Specification
PDD Typ: 3.14 Max:3.76 Typ: 2.8; Max: 3.37
13 IDD Typ: 950; Max:1140 Typ: 850; Max: 1020
IRush Max: TBD 2500
VDDrp Max: TBD 200
Backlight Power Consumption: Max:10.6 10.5
15 Backlight input signal characteristics:
NA Add LED Input Current: Typ 0.73; Max0.88
NA Add LED Inrush Current: Max: 2
26 NA Add Handling guide
1. Handling Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped
on hard surface.
6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before
handling TFT-LCD Module.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the LED light bar edge. Instead,
press at the far ends of the LED light bar edge softly. Otherwise the TFT Module may
be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a
very short time. Please design your display product well to avoid external force applying to
module by end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The
TFT-LCD module should be supplied by power complied with requirements of Limited
Power Source (IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time and lamp
ignition voltage.
14) Continuous operating TFT-LCD display under low temperature environment may accelerate
lamp exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when LCD module is placed in landscape
position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use
screen saver or shuffle content periodically if fixed pattern is displayed on the screen.
2. General Description
G156HTN02.0 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a
driver circuit, and LED backlight system. The screen format is intended to support the 16:9 FHD,
1920(H) x1080(V) screen and 16.7M colors (RGB 8-bits data driver) with LED backlight driving
circuit.
G156HTN02.0 is designed for a display unit of industrial machine.
Horizontal (Right) 70 80 -
CR = 10 (Left)
70 80 -
Viewing Angle degree 1, 2
Vertical (Upper) 60 70 -
CR = 10 (Lower)
60 70 -
Luminance Uniformity [%] 9 Point 62 70 - 1, 4
Contrast Ratio 500 700 - 1, 5
Cross talk - - 4 1, 6
Response Time msec Rising + Falling - 8 16 1, 7
Rx 0.588 0.638 0.688
Red
Ry 0.293 0.343 0.393
Gx 0.276 0.326 0.376
Color/ Green
Chromaticity Gy 0.576 0.626 0.676
Coordinates Bx CIE 1931 1, 8
0.106 0.156 0.206
Blue
By 0.003 0.053 0.103
Wx 0.263 0.313 0.363
White
Wy 0.279 0.329 0.379
NTSC % - 72 -
Photo detector
Field=2°
50 cm
Measured distance
The output signals of BM-7 or equivalent are measured when the input signals are changed
from “Black” to “White” (falling time) and from “White” to “Black” (rising time), respectively. The
response time interval between the 10% and 90% of amplitudes. Refer to figure as below.
"Black"
"White" "White"
100%
90%
Signal(Relative value)
10%
0%
Tr Tf
The following diagram shows the functional block of the 15.6 inch Color TFT-LCD Module:
Note 1: At Ta (25℃)
Note 2: Permanent damage to the device may occur if exceed maximum values
Note 3: LED specification refer to section 5.2
Note 4: For quality performance, please refer to AUO IIS (Incoming Inspection Standard)
5. Electrical Characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as follows;
The power specification are measured under 25 and frame frequency under 60Hz
Symble Parameter Min Typ Max Units Note
Logic/LCD Drive
VDD 3.0 3.3 3.6 [Volt]
Voltage
90% 3.3V
10%
0V
0.5ms
1 1920
1st Line R GB R GB R GB R GB
1080th Line R GB R GB R GB R GB
Frame Rate - 40 60 60 Hz
Clock frequency 1/ TClock 50 70.93 75 MHz
Period TH 1050 1065 1075
Horizontal
Active THD 960 Tclock
Section
Blanking THB 90 105 115
Period TV 1090 1110 1130
Vertical
Active TVD 1080 Tline
Section
Blanking TVB 10 30 50
Note 1: DE mode only.
LED on/off sequence is as follows. Interface signals are also shown in the chart.
90% 90%
Signal
10% 10%
90%
90%
VLED
10% 10%
T4 T5 T8 T9
90%
T6 T7
90%
Back light on/off
10%
T3 T10
Value
Parameter Units
Min. Typ. Max.
T1 0.5 - 10 [ms]
T2 60 - 70 [ms]
T3 400 - - [ms]
T4 0.5 - 10 [ms]
T5 10 - - [ms]
T6 10 - 180 [ms]
T7 10 - 180 [ms]
T8 10 - - [ms]
T9 - - 10 [ms]
T10 110 - - [ms]
T11 0.5 16 50 [ms]
T12 - - 10 [ms]
T13 1000 - - [ms]
Manufacturer E&T
Type Part Number 3710K-Q10N-01R
Mating Housing Part Number H113K-D10N-01B
PIN1
Note 2: For RoHS compatible products, AUO will add for identification.
Note 3: For China RoHS compatible products, AUO will add for identification.
Note 4: The Green Mark will be presented only when the green documents have been ready by AUO
Internal Green Team.
Box stacked
Module by air:(2 *3) *4 layers,one pallet put 24 boxes,total 384pcs module
Module by sea:(2 *3) *4 layers+(2 *3) *1 layers, two pallet put 30 boxes,total 480pcs module
Module by sea_HQ:(2 *3) *4 layers+(2 *3) *2 layers, two pallet put 42 boxes,total 576 pcs
module
G156HTN02.0
Provided by Document Version : 1.0 www.display-solution.com 23 of 28
info@display-solution.com
Product Specification
AU OPTRONICS CORPORATION
G156HTN02.0
Provided by Document Version : 1.0 www.display-solution.com 24 of 28
info@display-solution.com
Product Specification
AU OPTRONICS CORPORATION
Do not lift and hold the panel with Lift and hold the panel up with
single hand at right or left side from both hands from tray.
tray.
Do not press the surface of the panel to avoid the glass broken
or polarizer scratch.
G156HTN02.0
Provided by Document Version : 1.0 www.display-solution.com 25 of 28
info@display-solution.com
Product Specification
AU OPTRONICS CORPORATION
Do not put anything or tool on the panel to avoid the glass broken or
polarizer scratch.
Do not insert the connector with single hand and touching the PCBA.
G156HTN02.0
Provided by Document Version : 1.0 www.display-solution.com 26 of 28
info@display-solution.com
Product Specification
AU OPTRONICS CORPORATION
11 .Mechanical Characteristics
11.1 LCM Outline Dimension (Front View)