Sie sind auf Seite 1von 24

KSKV SVM 2017

MINISTRY OF EDUCATION, MALAYSIA

VOCATIONAL COLLEGE STANDARD CURRICULUM

COURSE INFORMATION

PROGRAMME : ELECTRICAL TECHNOLOGY

COURSE NAME : SINGLE PHASE WIRING

CODE NAME : ETE 1024

LEVEL / SEMESTER : 2 SEMESTER 1

CREDIT UNIT : 4.0

CONTACT HOUR : FACE TO FACE : 8.0 HOURS / WEEK

NON FACE TO FACE :

COURSE TYPE : VOCATIONAL

PREREQUISITE : -

CORE REQUISITE :

ETE 1024 Document Page 1/24


KSKV SVM 2017

COURSE OUTCOMES (COMPETENCY UNIT WORK ACTIVITIES)

At the end of the course, the students should be able to:-

1. Identify single phase wiring specifications and procedures, tools, equipment and materials.
2. Carry out wiring activities.
3. Carry out single phase earthing system installation, Distribution Board (DB) (metallic or insulated) installation.
4. Carry out fitting, accessories installation and system visual inspection.
5. Carry out dead and live circuit test.

COURSE DESCRIPTION (COMPETENCY UNIT DESCRIPTOR)

Single phase wiring covering the scope of competency to carry out wiring activities for Single Phase based on drawing given by utilizing wiring tools,
equipment and materials in compliance with Electrical Act 1990, Electrical Regulation 1994 and other related rules and regulations body and statutory
requirements. The personnel who are competent in the single phase electrical wiring must be able to interpret single phase wiring specifications and
procedures, single phase wiring requirement, carry out wiring activities, earthing system installation and carry out continuity, polarity, insulation and
resistance testing on the single phase wiring system.

ETE 1024 Document Page 2/24


KSKV SVM 2017

CONTENT AND LEARNING STANDARDS

PROGRAMME : ELECTRICAL TECHNOLOGY

COURSE NAME : SINGLE PHASE WIRING

CODE NAME : ETE 1024

CONTACT HOURS CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA /


(TRAINING DURATION) (WORK ACTIVITIES) (RELATED KNOWLEDGE / APPLIED SKILLS ASSESSMENT CRITERIA
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

16 HOURS 1. IDENTIFY SINGLE RELATED KNOWLEDGE ASSESSMENT CRITERIA


(2 WEEKS) PHASE WIRING
SPECIFICATIONS 1.1 Procedure of site visit and evaluation / 1.1 Correct wiring route and
AND PROCEDURES survey. inspection fitting and accessories
according to Electrical Act &
1.2 Technique to produce layout drawing. Regulation and Standard /
Occupational Safety & Health Act
1.3 Various type of conductor: Copper and 514 (OSHA) 1994.
Aluminum
1.2 Determine correct polarity and
1.4 Various types of cable: XLPE/SCT/PVC, connection according to Electrical
PVC/PVC, PVC/SWA/PVC and Act & Regulation / Occupational
XLPE/SWA/PVC. Safety & Health Act 514 (OSHA)
1994.
1.5 Cable colour coding according to MS IEC
60364 Standard.

ETE 1024 Document Page 3/24


KSKV SVM 2017

1.6 Various types of protection devices: MCB,


MCCB, RCCB/ELCB and Fuse.

1.7 Types of single phase wiring: Surface


wiring, Conceal wiring, Conduit wiring,
Conceal conduit Wiring, Ducting wiring,
Trunking / Casing, Cable tray and
Underground.

1.8 Suitable fitting and accessories: Switches


and Power Point (S/S/ 13A).

1.9 Electrical Act & Regulation and Standard:


Energy Commission Act 2001, Electricity
Supply Act 1990 (Act 447), Electrical
Regulation 1994, MS 1936: 2006 / IEC
60364, MS 1979: 2007 (COP), Electrical
Installation of Buildings – Code of practice
(COP) and Based on latest instruction by
regulatory body.

1.10 Occupational Safety & Health Act 514


(OSHA) 1994.

1.11 Authorization requirement to access site


such as: Green card and Safety passport.

ETE 1024 Document Page 4/24


KSKV SVM 2017

RELATED SKILLS

1.1 Determine procedure to carry out site visit PERFORMANCE CRITERIA


and evaluation.
1.1 Type single phase wiring
1.2 Determine location of the wiring route. procedures determined.
1.3 Determine types of wiring.

1.4 Determine types of protection devices.

1.5 Determine types of conductor.

1.6 Determine types of cable.

1.7 Determine suitable fitting and accessories.

1.8 Determine authorization requirement to


access site.

ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

1.1 Meticulous.
1.2 Housekeeping

Safety

1.1 Use appropriate PPE during carry out wiring


practical.
1.2 Safety tools & equipment in proper order.

ETE 1024 Document Page 5/24


KSKV SVM 2017

CONTENT AND LEARNING STANDARDS

PROGRAMME : ELECTRICAL TECHNOLOGY

COURSE NAME : SINGLE PHASE WIRING

CODE NAME : ETE 1024

CONTACT HOURS CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA /


(TRAINING DURATION) (WORK ACTIVITIES) (RELATED KNOWLEDGE / APPLIED SKILLS ASSESSMENT CRITERIA
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

8 HOURS 2. IDENTIFY SINGLE RELATED KNOWLEDGE ASSESSMENT CRITERIA


(1 WEEK) PHASE WIRING
TOOLS, EQUIPMENT 2.1 Single phase Wiring procedure. 2.1 Use correct various type of tools
AND MATERIALS according to Electrical Act &
2.2 Single phase Wiring preparation. Regulation and Standard /
Occupational Safety & Health Act
2.3 Single phase Wiring inspection. 514 (OSHA) 1994.

2.4 Wiring tools, equipment and materials. 2.2 Use correct devices cable
according to Electrical Act &
Regulation and Standard /
Occupational Safety & Health Act
514 (OSHA) 1994.

ETE 1024 Document Page 6/24


KSKV SVM 2017

RELATED SKILLS PERFORMANCE CRITERIA

2.1 Acquire single phase wiring works. 2.1 Single phase wiring tools,
equipment and materials
2.2 Select & use single phase wiring tools prepared on site.
equipment needed.

2.3 Select & fix electrical accessories.

2.4 Select & fix electrical fittings.

2.5 Select wiring tools, equipment and


materials.

ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

2.1 Handle wiring tools with care.

Safety

2.1 Ensure wiring tools in good working


condition.

ETE 1024 Document Page 7/24


KSKV SVM 2017

CONTENT AND LEARNING STANDARDS

PROGRAMME : ELECTRICAL TECHNOLOGY

COURSE NAME : SINGLE PHASE WIRING

CODE NAME : ETE 1024

CONTACT HOURS CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA /


(TRAINING DURATION) (WORK ACTIVITIES) (RELATED KNOWLEDGE / APPLIED SKILLS ASSESSMENT CRITERIA
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

24 HOURS 3. CARRY OUT WIRING RELATED KNOWLEDGE ASSESSMENT CRITERIA


(3 WEEKS) ACTIVITIES
3.1 Electrical hand tools. 3.1 Conduct wiring activities
according to Standard Operating
3.2 Types of electrical equipment & materials. Procedure.

3.3 Single phase wiring Standard Operating 3.2 Identify installation and
Procedure. connection wiring according to
Standard Operating Procedure.
3.4 Cable marking technique.
3.3 Connect all the earthing cable to
3.5 Types of cable size and polarity. frame earthing correctly.

ETE 1024 Document Page 8/24


KSKV SVM 2017

RELATED SKILLS PERFORMANCE CRITERIA

3.1 Setup safe working area. 3.1 Single phase installation & wiring
connected according to drawing
3.2 Conduct single phase wiring according specification.
layout plan and location wiring line.

3.3 Identify cable marking.

3.4 Identify cable size & polarity.

3.5 Check all fitting & accessories connected to


earthing.

ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

3.1 Ensure no wastage of cable.

Safety

3.1 Use appropriate PPE during wiring


activities.
3.2 Ensure safety tools & equipment in proper
order.

ETE 1024 Document Page 9/24


KSKV SVM 2017

CONTENT AND LEARNING STANDARDS

PROGRAMME : ELECTRICAL TECHNOLOGY

COURSE NAME : SINGLE PHASE WIRING

CODE NAME : ETE 1024

CONTACT HOURS CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA /


(TRAINING DURATION) (WORK ACTIVITIES) (RELATED KNOWLEDGE / APPLIED SKILLS ASSESSMENT CRITERIA
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

24 HOURS 4. CARRY OUT SINGLE RELATED KNOWLEDGE ASSESSMENT CRITERIA


(3 WEEKS) PHASE EARTHING
SYSTEM 4.1 Types of earthing. 4.1 Conduct single phase earthing
INSTALLATION system according Standard
4.2 Function of earthing. Operating Procedure.

4.3 Earthing procedure. 4.2 Test earthing system according


Standard Operating Procedure.
4.4 Electrical symbol.

4.5 Building structure.

4.6 Electrical hand tools.

4.7 Electrical equipment & materials.

4.8 Electrical earthing accessories & fitting.

ETE 1024 Document Page 10/24


KSKV SVM 2017

4.9 Earthing layout.

RELATED SKILLS PERFORMANCE CRITERIA

4.1 Determine types of earting. 4.1 Earthing system installation


executed according to drawing
4.2 Determine function of earthing. specification.

4.3 Install Distribution Fuse Board (DFB)


consumer unit to earth rod.

4.4 Connect main frame electrical equipment to


earth.

4.5 Test earthing system.

4.6 Construct earthing layout.

ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

4.1 Ensure no wastage of cable.

Safety

4.1 Use appropriate PPE during wiring


activities.
4.2 Ensure safety tools & equipment in proper
order.

ETE 1024 Document Page 11/24


KSKV SVM 2017

CONTENT AND LEARNING STANDARDS

PROGRAMME : ELECTRICAL TECHNOLOGY

COURSE NAME : SINGLE PHASE WIRING

CODE NAME : ETE 1024

CONTACT HOURS CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA /


(TRAINING DURATION) (WORK ACTIVITIES) (RELATED KNOWLEDGE / APPLIED SKILLS ASSESSMENT CRITERIA
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

24 HOURS 5. CARRY OUT SINGLE RELATED KNOWLEDGE ASSESSMENT CRITERIA


(3 WEEKS) PHASE
DISTRIBUTION 5.1 Distribution Board (metallic or insulated). 5.1 Check neatness of wiring
BOARD (DB) according Standard Operating
(METALLIC OR 5.2 Tools and equipment for single phase System.
INSULATED) Distribution Board (metallic or insulated)
INSTALLATION installation. 5.2 Terminate cable consumer unit
according Standard Operating
5.3 Wiring drawing. System.

5.4 Standard Operating Procedures (SOP) for 5.3 Terminate cable to fitting and
testing instrument. accessories according Standard
Operating System.
5.5 Types of electrical system testing, such as:
Insulation resistance test, Polarity test and 5.4 Test of continuity, polarity and
Continuity test. insulation resistance test
according Standard Operating

ETE 1024 Document Page 12/24


KSKV SVM 2017

System.

RELATED SKILLS PERFORMANCE CRITERIA

5.1 Select and use correct wiring materials. 5.1 Cable terminated to consumer
unit.
5.2 Select and use wiring tools and equipment
needed.

5.3 Carry out various method of consumer


surface single phase wiring: Domestic
surface wiring, Concealed wiring, Conduit
wiring and Trunking wiring.

5.4 Carry out wiring work according to wiring


drawing.

5.5 Execute electrical testing on wiring system.

ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

5.1 Housekeeping working area after wiring


activities.

Safety

5.1 Use appropriate PPE during carry out


earthing works.

5.2 Safety tools & equipment in proper order.

ETE 1024 Document Page 13/24


KSKV SVM 2017

CONTENT AND LEARNING STANDARDS

PROGRAMME : ELECTRICAL TECHNOLOGY

COURSE NAME : SINGLE PHASE WIRING

CODE NAME : ETE 1024

CONTACT HOURS CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA /


(TRAINING DURATION) (WORK ACTIVITIES) (RELATED KNOWLEDGE / APPLIED SKILLS ASSESSMENT CRITERIA
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

24 HOURS 6. CARRY OUT FITTING RELATED KNOWLEDGE ASSESSMENT CRITERIA


(3 WEEKS) AND ACCESSORIES
INSTALLATION 6.1 Single phase wiring drawing. 6.1 Terminate cable to fitting and
accessories according standard
6.2 Types of electrical accessories. operating procedure.

6.3 Types of electrical fittings.

6.4 Procedure to terminate cables, accessories


and fittings.

RELATED SKILLS PERFORMANCE CRITERIA

6.1 Determine location for fitting and 6.1 Cable terminated to fitting and
accessories installation. accessories.

ETE 1024 Document Page 14/24


KSKV SVM 2017

6.2 Select and fix electrical accessories.

6.3 Select and fix electrical fittings.

6.4 Terminate cables, accessories and fittings.

ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

6.1 Housekeeping working area after wiring


activities.

Safety

6.1 Use appropriate PPE during carry out


installation works.

6.2 Ensure safety tools & equipment in proper


order.

ETE 1024 Document Page 15/24


KSKV SVM 2017

CONTENT AND LEARNING STANDARDS

PROGRAMME : ELECTRICAL TECHNOLOGY

COURSE NAME : SINGLE PHASE WIRING

CODE NAME : ETE 1024

CONTACT HOURS CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA /


(TRAINING DURATION) (WORK ACTIVITIES) (RELATED KNOWLEDGE / APPLIED SKILLS ASSESSMENT CRITERIA
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

8 HOURS 7. CARRY OUT WIRING RELATED KNOWLEDGE ASSESSMENT CRITERIA


(1 WEEK) SYSTEM VISUAL
INSPECTION 7.1 Visual inspection. 7.1 Conduct visual inspection
7.2 Wiring drawing according to SOP. according standard operating
7.3 Wiring connection. procedure.

7.2 Identify fault according standard


RELATED SKILLS operating procedure.

7.1 Execute visual inspection on wiring system. PERFORMANCE CRITERIA


7.2 Identify fault on visual inspection.
7.3 Carry out housekeeping activities. 7.1 Neatness of wiring system
checked.
ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

7.1 Housekeeping working area after wiring


activities.

ETE 1024 Document Page 16/24


KSKV SVM 2017

CONTENT AND LEARNING STANDARDS

PROGRAMME : ELECTRICAL TECHNOLOGY

COURSE NAME : SINGLE PHASE WIRING

CODE NAME : ETE 1024

CONTACT HOURS CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA /


(TRAINING DURATION) (WORK ACTIVITIES) (RELATED KNOWLEDGE / APPLIED SKILLS ASSESSMENT CRITERIA
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

16 HOURS 8. CARRY OUT DEAD RELATED KNOWLEDGE ASSESSMENT CRITERIA


(2 WEEKS) CIRCUIT TEST
8.1 Types of circuit/connection. 8.1 Test of continuity, polarity,
insulation resistance and earthing
8.2 Electrical testing: Insulation resistance test test according standard operating
(IRT), Polarity test, Earthing continuity test procedure.
and Earthing test (Earth resistance test and
Earth loop impedance test).

8.3 Testing instrument standard operating


procedures (SOP).

8.4 Procedure to interpret testing result.

ETE 1024 Document Page 17/24


KSKV SVM 2017

PERFORMANCE CRITERIA
RELATED SKILLS
8.1 Continuity, polarity, insulation
8.1 Determine circuit/connection. resistance tested.

8.2 Execute electrical testing on wiring system.

8.3 Interpret testing result.

ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

8.1 Handle testing equipment with care.

ETE 1024 Document Page 18/24


KSKV SVM 2017

CONTENT AND LEARNING STANDARDS

PROGRAMME : ELECTRICAL TECHNOLOGY

COURSE NAME : SINGLE PHASE WIRING

CODE NAME : ETE 1024

CONTACT HOURS CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA /


(TRAINING DURATION) (WORK ACTIVITIES) (RELATED KNOWLEDGE / APPLIED SKILLS ASSESSMENT CRITERIA
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

8 HOURS 9. CARRY OUT LIVE RELATED KNOWLEDGE ASSESSMENT CRITERIA


(1 WEEKS) CIRCUIT TEST
9.1 ELCB/RCB functioning testing. 9.1 Determine ELCB/RCB functioning
9.2 Supply voltage test. testing according standard
operating procedure.
RELATED SKILLS
9.2 Test supply voltage according
9.1 Determine ELCB/RCB functioning testing. standard operating procedure.
9.2 Test supply voltage.

PERFORMANCE CRITERIA
ATTITUDE / SAFETY / ENVIRONMENTAL
9.1 ELCB/RCB functioning testing
Attitude determined.

9.1 Handle testing equipment with care.

ETE 1024 Document Page 19/24


KSKV SVM 2017

CONTENT AND LEARNING STANDARDS

PROGRAMME : ELECTRICAL TECHNOLOGY

COURSE NAME : SINGLE PHASE WIRING

CODE NAME : ETE 1024

CONTACT HOURS CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA /


(TRAINING DURATION) (WORK ACTIVITIES) (RELATED KNOWLEDGE / APPLIED SKILLS ASSESSMENT CRITERIA
/ ATTITUDE / SAFETY / ENVIRONMENTAL)

8 HOURS 10. PREPARE SINGLE RELATED KNOWLEDGE ASSESSMENT CRITERIA


(1 WEEK) PHASE WORK
ACTIVITIES REPORT 10.1 Procedure to produce single phase wiring. 10.1 Submit procedure to produce
single phase wiring according
10.2 Procedure to submit single phase wiring for standard operating procedure.
approval.
10.2 Report procedure of single
10.3 As built drawing preparation. phase wiring according standard
operating procedure.
10.4 Test result.

10.5 Regulatory bodies and tender requirements


(Form G and Form H).

ETE 1024 Document Page 20/24


KSKV SVM 2017

RELATED SKILLS PERFORMANCE CRITERIA

10.1 Determine procedure to produce single 10.1 Supervision and completion


phase wiring. certificate signed.

10.2 Determine procedure to submit single


phase wiring for approval to superior.

10.3 Prepare as built drawing.

10.4 Check test result.

10.5 Follow regulatory bodies and tender


requirements.

ATTITUDE / SAFETY / ENVIRONMENTAL

Attitude

10.1 Meticulous in writing report.

ETE 1024 Document Page 21/24


KSKV SVM 2017

EMPLOYABILITY SKILLS

CORE ABILITIES SOCIAL SKILLS

01.01 Identify and gather information 1. Communication skills


01.02 Document information, procedures or processes 1. Conceptual skills
02.01 Interpret and follow manuals, instructions and SOP’s 2. Interpersonal skills
02.04 Prepare brief reports and checklist using standard form 3. Multitasking and prioritizing
03.01 Apply cultural requirements to the workplace 4. Self-discipline
03.05 Demonstrate safety skills 5. Teamwork
04.02 Set and revise own objectives and goals 6. Learning skills
04.03 Organize and maintain own workplace 7. Leaderships
06.02 Comply with and follow chain of command
06.01 Understand system
06.03 Identify and highlight problems

ETE 1024 Document Page 22/24


KSKV SVM 2017

TOOLS, EQUIPMENT AND MATERIALS (TEM)

ITEMS RATIO (TEM : TRAINEES)

1. Schematic diagram 1:1


2. Block Diagram 1:1
3. Measuring and Test Instruments 1:1
4. Components/Parts Specification 1:1
5. Distribution Boards 1:2
6. Trunking Tools 1:1
7. Equipment Data Book 1:1
8. Electrical Equipment 1:1
9. Electrical hand tools 1:1
10. Electrical power tools 1:1
11. Electrical Mechanical tools 1:1
12. Electrical Accessories 1:1
13. Electrical Fittings 1:1
14. Electrical Testing Instrument 1:1
15. Double Insulated cable 1:1
16. Wiring lead 1:1
17. Wiring nail 1:1
18. Cables 1:1
19. PVC Tape 1:1
20. Standard Operating Procedure 1:1

ETE 1024 Document Page 23/24


KSKV SVM 2017

REFERENCES

1. Undang-Undang Malaysia. (2005). Akta Bekalan Elektrik 1990 dan Peraturan-Peraturan Elektrik 1994, Pindaan sehingga
2005. MDC Publisher Sdn Bhd Malaysia.

2. Suruhanjaya Tenaga Malaysia. Standard Pendawaian Malaysia (Electrical Installations Of Buildings - MS IEC
60364) Jabatan Standard Malaysia

3. The Institution of Electrical Engineers. (1998). Peraturan-Peraturan bagi Pemasangan Elektrik, Edisi 16. Golden Books
Centre Sdn Bhd

4. Giesecke, F. E. et. Al. 2002. Technical Drawing. Prentice Hall

5. BS 7671: 2001 Requirements for Electrical Installations (IEE Wiring Regulations, Sixteenth Edition)
Institution of Electrical Engineers

ETE 1024 Document Page 24/24

Das könnte Ihnen auch gefallen