Beruflich Dokumente
Kultur Dokumente
Applications
• Overhead lines including series compensated lines and • Circuits with in-zone power transformers and tapped
underground cables of different voltage levels transformer feeders
• Single and dual-breaker circuits requiring single pole/three- • Secure application with Capacitively-Coupled Voltage
pole autoreclosing and independent synchrocheck Transformers (CCVTs)
• Backup protection for generators, transformers and reactors
Features
Protection and Control IEC 61850 Process Bus Interface
• Phase Distance (five zones) with independent compensation • Robust communications with up to 8 HardFiber Bricks
settings for in-zone power transformers • Seamless integration with existing D60 functions
• Ground distance (five zones) with independent self and mutual • Redundant architecture for dependability and security
zero sequence compensation
• Out-of-step tripping and power swing blocking Monitoring and Metering
• Line pickup • Synchronised measurement of voltage & current and
sequence component phasors - 1 to 60 phasors/sec
• Directional overcurrent: Phase, neutral and negative sequence
• Metering - current, voltage, power, energy, frequency
• Synchronism check for dual breaker applications
• Oscillography – analog and digital parameters at
• Four-shot dual breaker auto-recloser 64 samples/cycle
• VT fuse failure detector, compensated over-voltage • Event Recorder - 1024 time tagged events with 0.5ms scan of
Communications digital inputs
• Networking interfaces – 100Mbit Fiber Optic Ethernet, RS485, • Setting Security Audit Trail for tracking changes to D60
RS232, RS422, G.703, C37.94 configuration
• Multiple Protocols - IEC61850, DNP 3.0 Level 2, Modbus RTU,
Modbus TCP/IP, IEC60870-5-104, Ethernet Global Data (EGD) EnerVista™ Software
• Graphical Logic Designer and Logic Monitor to simplify
• Direct I/O – secure, high-speed exchange of data between URs
designing and testing procedures
for Direct Transfer Trip and pilot-Aided schemes
• Document and software archiving toolset to ensure reference
• Embedded Managed Ethernet Switch with 4 - 100 Mbit Fiber
material and device utilities are up-to-date
optic ports and 2 copper ports
g
• EnerVista™ Integrator providing easy integration of data in
the D60 into new or existing monitoring and control systems
Digital Energy
Multilin
235
D60 Line Distance Protection System
Distance Protection
The D60 is the single point for protection, control, metering, and monitoring in one integrated device that
The core of the D60 relay is the distance can be easily connected directly to HMI or SCADA monitoring and control systems.
function providing high degree of sensitivity
and selectivity for all types of faults. The suit for different power system conditions. monitoring function provides extra security
distance function comes with five zones to the distance element, which can be
The advanced comparator based distance
of phase distance and ground distance used to block the distance elements under
elements provide utmost security, sensitivity
providing the user maximum flexibility voltage source fuse failure conditions.
and selectivity for different types of faults.
to cater for different applications which
Superior digital filtering techniques provide In-Zone Transformer Compensation
include primary line protection and back-
secure and optimum reach accuracy even
up protection for busbars generators, Phase distance protection in the D60 can
under worst-case CVT transients. Secure
transformers and reactors. The relay can be used to detect faults through different
directional discrimination is achieved by
be applied to power systems with different types of three-phase wye/delta transformer,
using positive sequence memory voltage
earthing conditions, lines with in-zone allowing application of the D60 for backup
polarization providing reliable directionality
transformers or tapped transformer protection on generators. VTs and CTs can
for worst-case close-in faults. The D60
feeders, and overhead lines with series be installed independent of each other
employs a well-proven algorithm for phase
compensation. Each zone element for on either side of the power transformer.
selection which provides faster, secure
the phase and ground distance can The relay automatically compensates for
and reliable faulted phase identification
be independently set as Quad or Mho transformer connections, to guarantee
for single pole tipping and proper fault
characteristics with the flexibility of accurate reach for any type of fault.
distance calculation for a variety of power
designing different characteristic shapes to
system conditions. An additional voltage
Metering Transducer
Inputs
59C Compensated Overvoltage
(via Communications) Schemes
59N Neutral Overvoltage
27P (2)
50G (2) 51G (2) 59P Phase Overvoltage
59X Auxiliary Overvoltage
59N
59_2 Negative Sequence Overvoltage
67N Neutral Directional Overcurrent
D60 Line Distance Protection System
67P Phase Directional Overcurrent
837709AE.CDR
67_2 Negative Sequence Directional Overcurrent
68 Power Swing Blocking
ANSI DEVICE NUMBERS AND FUNCTIONS 78 Out-of-Step Tripping
DEVICE
FUNCTION DEVICE
FUNCTION
79 Automatic Recloser
NUMBER NUMBER
www.GEDigitalEnergy.com 237
D60 Line Distance Protection System
Breaker Failure
The D60 is able to provide fully independent
breaker failure protection for the breakers
associated to the line when connected to
a substation with a breaker-and-a-half or
ring bus arrangement. The D60 provides
the elements to perform two independent
breaker failure functions.
238 www.GEDigitalEnergy.com
D60 Line Distance Protection System
significantly reduce the time needed for Settings Security & Device Status Reports
postmortem analysis of power system
events and creation of regulatory reports.
Recording functions include:
www.GEDigitalEnergy.com 239
D60 Line Distance Protection System
Multi-Language all of the setup and support tools needed systems. Viewpoint Monitoring provides a
The D60 supports English, French, Russian, for configuring and maintaining GE Multilin complete HMI package with the following
and Chinese languages on the front panel, products. The setup software within functionality:
EnerVista™ setup software, and product Launchpad allows configuring devices in
Transmission Line Protection
manual. Easily switch between English real-time by communicating using serial, • Plug-&-Play Device Monitoring
and an additional language on the local Ethernet, or modem connections, or offline
• System Single-Line Monitoring & Control
displays without uploading new firmware. by creating setting files to be sent to
• Annunciator Alarm Screens
devices at a later time.
• Trending Reports
EnerVistaTM Software Included in Launchpad is a document • Automatic Event Retrieval
The EnerVista™ Suite is an industry-leading archiving and management system
• Automatic Waveform Retrieval
set of software programs that simplifies that ensures critical documentation is
up-to-date and available when needed.
every aspect of using the D60 relay. The Viewpoint Engineer
EnerVista™ suite provides all the tools Documents made available include:
Viewpoint Engineer is a set of powerful
to monitor the status of the protected tools that will allow the configuration and
asset, maintain the relay, and integrate • Manuals
testing of UR relays at a system level
information measured by the D60 into • Application Notes in an easy-to-use graphical drag-and-
DCS or SCADA monitoring systems. • Guideform Specifications drop environment. Viewpoint Engineer
Convenient COMTRADE and Sequence provides the following configuration and
• Brochures
of Events viewers are an integral part commissioning utilities:
of the UR Setup software included with • Wiring Diagrams
every UR relay, to carry out postmortem • FAQ’s
• Graphical Logic Designer
event analysis to ensure proper protection • Service Bulletins
system operation. • Graphical System Designer
Viewpoint Monitoring • Graphical Logic Monitor
EnerVista™ Launchpad
Viewpoint Monitoring is a simple-to-use • Graphical System Monitor
EnerVista™ Launchpad is a powerful
and full-featured monitoring and data
software package that provides users with
recording software package for small
240 www.GEDigitalEnergy.com
D60 Line Distance Protection System
F 1a
F 1b
F 2a
F 2b
F 3a
F 3b
F 4a
F 4b
F 5a
F 6a
F 7a
F 8a
F 1c
F 2c
F 3c
F 4c
F 5c
F 6c
F 7c
F 8c
• Device Health Report
VX
VB
VC
VA
VX
IG5
IG1
VB
VC
IG
VA
IA5
IA1
IB
IC
IA
IC5
IC1
IB5
IB1
• Single Click Fault Data Retrieval
H7a 6H I H1a TC 1
D60
H5 H5b
V
H5c
I H6a
D60-H07-HLH-F8L-H6H-M6K-P6C-U6D-W6A H6
• OPC/DDE Server V
H6b
H6c
W5a 6A I W1a
• GE Multilin Drivers W5c
W6a
W1
V
W1b
W1c
W6c I W2a
User Interface
6C
P1 P1b
P1c
P2a
P2 P2b
U1c P3a
P3 P3b
local HMI capabilities. The local display
U2a
U2c P3c
U1b P4a
is used for monitoring, status messaging, U3a
P4 P4b
P4c
U3c
fault diagnosis, and device configuration.
P5a
U4a
P5 P5b
U4c
U3b P5c
User configurable messages that combine U5a P6
P6a
P6b
U5c
text with live data, can be displayed when U6a
P6c
P7a
U6c P7 P7b
user-defined conditions are met. U5b
U7a
P7c
P8a
U7c P8 P8b
U8a P8c PERSONAL
COMPUTER
U8c
U7b
U8b SURGE
M1a
6K
RS-232 1 M1b
B1b M1c
CRITICAL DB-9
1
IRIG-B
Co-axial BNC Output
837774A6.CDR
Minimum
X W V U T S R P N M L K J H G F D B
6 6 6 6 6 8 9 1
Inputs/ Inputs/ Inputs/ Inputs/
outputs outputs outputs outputs Inputs/ CT/VT CPU Power
* * * * outputs Supply
PROVIDED
www.GEDigitalEnergy.com 241
D60 Line Distance Protection System
Ordering
D60 - * ** - H * * - F ** - H ** - M ** - P ** - U ** - W ** For Full Sized Horizontal Mount
Base Unit D60 Base Unit
CPU E RS485 & RS485 (IEC61850 option not available)
Transmission Line Protection
Ordering Notes:
1 - For vertical mounting order codes, please visit our online store
2 - To view the latest options available for the D60, or to order the UR Classic Front Panel, please visit our online store for more details.
090810-v3
242 www.GEDigitalEnergy.com