Sie sind auf Seite 1von 5

CH

1. Which of the following have highest elasticity

a. steel b. copper c. rubber d. aluminum

2. According to Hooks law ,the elasticity ,ratio of stress to strain

a. remains constant b. Increases c. Decreases d. is zero

3. The modulus of elasticity is dimensionally equivalent to

a. stress b. strain c. Force d. all of these

4.Bulk modulus of elasticity of a perfectly rigid body is

a. zero b. infinity c. 1 d. finite

5. Bulk modulus of elasticity of a perfectly elastic body is

a. zero b. infinity c. 1 d. finite

6. Bulk modulus of elasticity of a perfectly plastic body is

a. zero b. infinity c. 1 d. finite

7. Shear modulus of a liquid is

a. zero b. infinity c. 1 d. finite

8. Young modulus depends on

a. its length b .its area c. g d. none of these

9. The length of a wire is doubled, then its young modulus

a. remains unchanged b. becomes double

c. becomes half d. becomes quarter


10. .The end point of linear portion of stress strain curve of a ductile solid
material is called

a. plastic limit b. proportion limit c. middle point of gra d. none

11 .Area of force extension graph for a wire gives

a. stress b. strain c. energy d. elasticity

12. The capacitance of a parallel plate capacitor does not depend upon.

(a) Area of plates (b) Medium between the plates

(c) Distance between the plates (d) Metal of the plates

13. If dielectric is inserted between the plates of capacitor with battery

connected them energy stored in capacitor.

(a)Increases (b) Decreases (c) Remains same (d) None of these

14. A capacitor acts as a perfect insulator in

a. A.C circuit b. D.C circuit c. both a and b d. none of these

15. Three capacitors are connected in series .On them there will be

a. equal charge b. equal potential

c. equal charge and equal potential d.un equal charge and equal potential

16. When two capacitors 3 µF and 6 µF are connected in series and the
combination is charged to potential of 120v ,the potential difference across
the 3 µF capacitor is

a. 40 v b. 80 v c. 60 v d. 120 v

17.When two capacitors 3 µF and 6 µF are connected in parallel and the


combination is charged to potential of 120v ,the potential difference across
the 3 µF capacitor is

a. 40 v b. 80 v c. 60 v d. 120 v
18. Due to polarization of dielectric capacitance of capacitor.

(a) Increase (b) Decrease

(c) Remains same (d)First Increase them decreases

19. A parallel plate capacitor in given a charge Q. if the separation between


the plates in doubled, ts capacity will be.

(a) Uncharged (b) Zero (c) Double (d) Halved

20. A sample of a conductor is said to obey Ohm's law if graph between V


and I is

(a)Straight line (b) Curve (c) Parabola (d)Either (a) or (b)

21. A wire of resistivity1 ohm metre is stretched to double its length. The
resistivity of the wire becomes

(a)1 ohm metre (b)4 ohm.metre (c)2 ohm metre (d)¼ ohm metre

22. The resistivity of a material of the wire depends upon:

(a)Length of the wire (b) Resistance of the wire

(c)Area of cross-section (d) Material of wire

23.An electron gun consists of:

a: Indirectly heated cathode and a grid b: Three anodes

c: Directly heated cathode d: Both (a) and (b)

24. The anodes in CRO are at:

a: Higher potential w.r.t. cathode b: Lower potential w.r.t. cathode

c: Same potential as cathode d: Any of these

25. The anodes in CRO are used to:

a: Accelerate the electronic beam b: Disperse the electronic beam

c: Focus the electronic beam d:Both (a) and (c)


26. The grid G in CRO is at:

a: Negative potential w.r.t. cathode b: Positive potential w.r.t. anode

c: Negative potential w.r.t. anode d: Both (a) and (c)

27. The direction of force on a current carrying conductor placed in a


magnetic field is that of:

a: Length of conductor b: Magnetic field

c: LxB d: both and b

28.if current carrying conductor is placed perpendicular to the magnetic


field, it will experience a force:

a: Zero b: ILB cos α c: ILB d: Both (a) and (b)

29.The field is uniform and much stronger:

a: Inside a long solenoid b: Outside a long solenoid

c: At the end of a long solenoid d:At the central point of a long solenoid

30. The magnetic field inside a solenoid can be increased by:

a: Increasing n b: Decreasing I c: Increasing I d:All correct except b

31.If the number of turns of a solenoid (carrying a steady current I) is


doubled without changing the length of solenoid, then magnetic field:

a:Becomes half b:Becomes double c:is not affected d:Becomes one fourth

32. In AND gate, the output is 0 if:

a: Both inputs are 0 b: Both inputs are 1

c: Only one input is 0 d: Both (a) and (c)

33.If both the inputs given to a gate are 1 such that the output is 0, then it
is:

a: NOR gate b: NAND gate C: XOR gate d: All of these


34.If both inputs given to a gate are 0 such that the output is 1, then it is:

a: NAND gate b: NOR gate c: XNOR gate d: All these

35. If both the inputs given to a gate are 1 such that the output is 0, then it
is:

a: AND gate b: NOR gate c: OR gate d: NOT gate

Das könnte Ihnen auch gefallen