Sie sind auf Seite 1von 11

Preliminary Datasheet

1.5MHz Synchronous Step-down DC-DC Converter AP3410

General Description Features


The AP3410 is a high efficiency step-down DC-DC • High Efficiency Buck Power Converter
voltage converter. The chip operation is optimized by • Wide Input Voltage Range: 2.5V to 5.5V
peak-current mode architecture with built-in • Adjustable Output Voltage: 0.6V to 0.9×VIN
synchronous power MOSFET switchers. The • Low RDS(ON) Internal Switches:200mΩ (VIN=5V)
oscillator and timing capacitors are all built-in • Built-in Power Switches for Synchronous
providing an internal switching frequency of 1.5MHz Rectification with High Efficiency
that allows the use of small surface mount inductors • Output Current: 1.2A
and capacitors for portable product implementations. • Feedback Voltage: 600mV
• 1.5MHz Constant Frequency Operation
Integrated Soft Start (SS), Under Voltage Lock Out • Thermal Shutdown Protection
(UVLO), Thermal Shutdown Detection (TSD) and • Low Dropout Operation at 100% Duty Cycle
Short Circuit Protection are designed to provide • No Schottky Diode Required
reliable product applications. • Input Over Voltage Protection
• Output Over Voltage Protection
The device is available in adjustable output voltage • Over Current Protection
version ranging from 0.6V to 0.9×VIN when input
voltage range is from 2.5V to 5.5V, and is able to
deliver up to 1.2A.

The AP3410 is available in SOT-23-5 and Applications


DFN-2×2-6 packages.
• Post DC-DC Voltage Regulation
• PDA and Notebook Computer

SOT-23-5 DFN-2×2-6

Figure 1. Package Types of AP3410

Mar. 2013 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

1
Preliminary Datasheet

1.5MHz Synchronous Step-down DC-DC Converter AP3410

Pin Configuration

K Package DN Package
(SOT-23-5) (DFN-2×2-6)

EN 1 5 FB

GND 2

LX 3 4 VIN

Figure 2. Pin Configuration of AP3410 (Top View)

Pin Description

Pin Number
Pin Name Function
SOT-23-5 DFN-2×2-6
1 2 EN Chip enable pin. Active high
2 5 GND Ground pin
3 4 LX Switch output pin
4 3 VIN Power supply
5 6 FB Feedback voltage of output
1 NC No internal connection

Mar. 2013 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

2
Preliminary Datasheet

1.5MHz Synchronous Step-down DC-DC Converter AP3410

Functional Block Diagram

Figure 3. Functional Block Diagram of AP3410

Mar. 2013 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

3
Preliminary Datasheet

1.5MHz Synchronous Step-down DC-DC Converter AP3410

Ordering Information

AP3410 -

G1: Green
Circuit Type
K: SOT-23-5 TR: Tape & Reel
DN: DFN-2×2-6

Temperature Marking
Package Part Number Packing Type
Range ID
SOT-23-5 -40 to 85ºC AP3410KTR-G1 GHW Tape & Reel
DFN-2×2-6 -40 to 85ºC AP3410DNTR-G1 CJ Tape & Reel

BCD Semiconductor's Pb-free products, as designated with "G1" suffix in the part number, are RoHS compliant
and green.

Absolute Maximum Ratings (Note 1)

Parameter Symbol Value Unit


Input Voltage for the MOSFET Switch VIN 0 to 6.0 V
Enable Input Voltage VEN -0.3 to VIN+0.3 V
LX Pin Switch Current ILX 1.8 A
SOT-23-5 0.4
Power Dissipation (on PCB, TA=25°C) PD W
DFN-2×2-6 1.89
Thermal Resistance (Junction to Ambient, SOT-23-5 250
θJA ºC/W
Simulation) DFN-2×2-6 53
Thermal Resistance (Junction to Case,
θJC SOT-23-5 130 ºC/W
Simulation)
Operating Junction Temperature TJ 155 ºC
Storage Temperature TSTG -55 to 150 ºC
Operating Temperature TOP -40 to 85 ºC
ESD (Machine Model) VMM 200 V
ESD (Human Body Model) VHBM 2000 V

Note 1: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to
the device. These are stress ratings only, and functional operation of the device at these or any other conditions
beyond those indicated under “Recommended Operating Conditions” is not implied. Exposure to “Absolute
Maximum Ratings” for extended periods may affect device reliability.

Mar. 2013 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

4
Preliminary Datasheet

1.5MHz Synchronous Step-down DC-DC Converter AP3410

Recommended Operating Conditions

Parameter Symbol Min Max Unit


Supply Input Voltage VIN 2.5 5.5 V
Operating Ambient Temperature TA -40 85 ºC
Operating Junction Temperature TJ -40 125 ºC

Electrical Characteristics
VIN=VEN=5V, VOUT=1.2V, VFB=0.6V, L=2.2µH, CIN=4.7µF, COUT=10µF, TA=25°C, unless otherwise
specified.

Parameters Symbol Conditions Min Typ Max Unit


Input Voltage Range VIN 2.5 5.5 V
Shutdown Current IOFF VEN=0 0.1 µA
Active Current ION VFB=0.55V 220 µA
Regulated Feedback
VFB 0.588 0.6 0.612 V
Voltage
Regulated Output VIN=2.5V to 5.5V,
Voltage Accuracy ∆VOUT/VOUT IOUT=0 to 1.2A
-3 3 %

Peak Inductor Current IPK 1.5 1.9 A


Oscillator Frequency fOSC VIN=2.5V to 5.5V 1.2 1.5 1.8 MHz
PMOSFET RDS(ON) RDS(ON)P VIN=5V 200 mΩ
NMOSFET RDS(ON) RDS(ON)N VIN=5V 200 mΩ
EN High Level Input
VEN_H 1.5 V
Voltage
EN Low Level Input
VEN_L 0.4 V
Voltage
EN Input Current IEN 0.1 µA
Soft Start Time tSS 400 µs
Maximum Duty Cycle DMAX 100 %
Rising 2.3
Under Voltage Lock
VUVLO Falling 2.1 V
Out Threshold
Hysteresis 0.2
Thermal Shutdown TSD Hysteresis=30°C 155 160 °C

Mar. 2013 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

5
Preliminary Datasheet

1.5MHz Synchronous Step-down DC-DC Converter AP3410

Typical Performance Characteristics

VIN=5V, TA=25°C, unless otherwise noted.

100 0.70

95
0.68
90
0.66

Regulated Feedback Voltage (V)


85
0.64
80
Efficiency (%)

75 0.62

70 0.60
VIN=5.0V
65 VOUT=1.0V 0.58
60
VOUT=1.2V
VOUT=1.8V 0.56
55 VOUT=2.5V
0.54
50 VOUT=3.3V
45 0.52
VIN=5.0V
40 0.50
0.0 0.2 0.4 0.6 0.8 1.0 1.2 -40 -20 0 20 40 60 80 100 120 140
Output Current (A) o
Temperature ( C)

Figure 4. Efficiency vs. Output Current Figure 5. Regulated Feedback Voltage vs. Temperature

VOUT_AC
VOUT_AC 10mV/div
10mV/div
VSW
VSW 2V/div
2V/div
IL
IL 1A/div
500mA/div

Time 800µs/div Time 400ns/div

Figure 6. Output Ripple (IOUT=0A) Figure 7. Output Ripple (IOUT=1.2A)

Mar. 2013 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

6
Preliminary Datasheet

1.5MHz Synchronous Step-down DC-DC Converter AP3410

Typical Performance Characteristics (Continued)

VIN=5V, TA=25°C, unless otherwise noted.

VEN VEN
5V/div 5V/div
VSW VSW
5V/div
5V/div
VOUT
VOUT
1V/div
1V/div
IL IL
500mA/div 500mA/div

Time 200µs/div Time 800µs /div

Figure 8. Enable Turn On (IOUT=1.2A) Figure 9. Enable Turn Off (IOUT=1.2A)

VOUT VOUT
1V/div 1V/div

VSW VSW
5V/div 5V/div

IL
IL 2A/div
2A/div

Time 200µs/div Time 200µs /div

Figure 10. Short Circuit Protection (IOUT=1.2A) Figure 11. Short Circuit Protection Recovery (IOUT=1.2A)

Mar. 2013 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

7
Preliminary Datasheet

1.5MHz Synchronous Step-down DC-DC Converter AP3410

Typical Application

Figure 12. Typical Applications of AP3410

Table 1. Component Guide

VOUT (V) R1 (kΩ) R2 (kΩ) L (µH)


3.3 450 100 2.2
2.5 320 100 2.2
1.8 200 100 2.2
1.2 100 100 2.2
1.0 66 100 2.2

Mar. 2013 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

8
Preliminary Datasheet

1.5MHz Synchronous Step-down DC-DC Converter AP3410

Mechanical Dimensions

SOT-23-5 Unit: mm(inch)

2.820(0.111)
3.100(0.122) 0.100(0.004)
0.200(0.008)

0.200(0.008)

0.700(0.028)
REF

0.300(0.012) 0°
0.950(0.037) 0.500(0.020) 8°
TYP
1.800(0.071)
2.000(0.079)

0.000(0.000)
0.150(0.006)

0.900(0.035)
1.300(0.051)

Mar. 2013 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

9
Preliminary Datasheet

1.5MHz Synchronous Step-down DC-DC Converter AP3410

Mechanical Dimensions (Continued)

DFN-2×2-6 Unit: mm(inch)

Mar. 2013 Rev. 1. 1 BCD Semiconductor Manufacturing Limited

10
BCD Semiconductor Manufacturing Limited

http://www.bcdsemi.com

IMPORTANT NOTICE

BCD Semiconductor Manufacturing Limited reserves the right to make changes without further notice to any products or specifi-
cations herein. BCD Semiconductor Manufacturing Limited does not assume any responsibility for use of any its products for any
IMPORTANT NOTICE
IMPORTANT NOTICE
particular purpose, nor does BCD Semiconductor Manufacturing Limited assume any liability arising out of the application or use
of any its products or circuits. BCD Semiconductor Manufacturing Limited does not convey any license under its patent rights or
BCD Semiconductor
BCD Semiconductor Manufacturing
Manufacturing Limited
Limited reserves
reserves the
the right
right to
to make
make changes
changes without
without further
further notice
notice to to any
any products
products oror specifi-
specifi-
other rights nor the rights of others.
cations herein.
cations herein. BCD
BCD Semiconductor
Semiconductor Manufacturing
Manufacturing Limited
Limited does
does not
not assume
assume any
any responsibility
responsibility for
for use
use of
of any
any its
its products
products for
for any
any
particular
particular
MAIN SITE
purpose,
purpose, nor
nor does
does BCD
BCD Semiconductor
Semiconductor Manufacturing
Manufacturing Limited
Limited assume
assume any
any liability
liability arising
arising out
out of
of the
the application
application or
or use
use
-of any its
any its products
products or
ofHeadquarters or circuits.
circuits. BCD
BCD Semiconductor
Semiconductor Manufacturing
- Wafer Limited
Manufacturing Limited
Fab does not
does not convey
convey anyany license
license under
under itsits patent
patent rights
rights or
or
other
BCD
other rights
(Shanghai) nor the
nor the rights
rights Micro-electronics of others.
of
rightsLimited
others. Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd.
No. 1600, Zi Xing Road, Shanghai ZiZhu Science-based Industrial Park, 200241, P. R.C. 800 Yishan Road, Shanghai 200233, China
Tel: +86-021-2416-2266, Fax: +86-021-2416-2277 Tel: +021-6485-1491, Fax: +86-021-5450-0008
MAIN SITE
MAIN SITE
REGIONAL
- Headquarters
BCD SALES Manufacturing
Semiconductor OFFICE Limited - Wafer
BCD FabSemiconductor Manufacturing Limited
BCD
- WaferSemiconductor
Shenzhen Office
Fab Manufacturing Limited Shanghai
Taiwan Office SIM-BCD
(Taipei)
- IC Design GroupSemiconductor Manufacturing Co., Ltd.
No. 1600, Zi
Shanghai
Shanghai Xing Road,
SIM-BCD
SIM-BCD Shanghai ZiZhu
Semiconductor
Semiconductor Science-basedCo.,
Manufacturing
Manufacturing Industrial Park, 200241,
Ltd., Shenzhen
Limited China
Office BCD800 Yi Shan Road,
Semiconductor
Advanced Shanghai
(Taiwan)
Analog 200233,
Company
Circuits China
Limited
(Shanghai) Corporation
Tel:
800,+86-21-24162266,
Unit A
YiRoom
Shan Road, Fax: +86-21-24162277
1203,Skyworth
Shanghai Bldg.,
200233,Gaoxin
ChinaAve.1.S., Nanshan District Tel: +86-21-6485
3F, No.17, Lane
8F, Zone171, 1491,
Sec.
B, 900, YiFax:
2, Shan+86-21-5450
Jiu-Zong 0008Dist.,
Rd.,Shanghai
Road, Nei-Hu Taipei(114),
200233, China Taiwan, R.O.C
Shenzhen 518057,1491,
Tel: +86-21-6485 ChinaFax: +86-21-5450 0008 Tel: +886-2-2656 2808
Tel: +86-21-6495 9539, Fax: +86-21-6485 9673
REGIONAL SALES OFFICE
Tel: +86-0755-8660-4900, Fax: +86-0755-8660-4958 Fax: +886-2-2656-2806/26562950
Shenzhen OfficeSALES OFFICE
REGIONAL Taiwan Office USA Office
Shanghai
Taiwan
Shenzhen SIM-BCD
Office Semiconductor Manufacturing Co., Ltd., Shenzhen Office
(Hsinchu)
Office USABCD Semiconductor
Office
Taiwan Office (Taiwan) Company Limited BCD Office
Korea Office USA Semiconductor Corp.
Unit
BCD ASemiconductor
Shanghai Room 1203, Skyworth
SIM-BCD (Taiwan)Bldg., Gaoxin
Company
Semiconductor Ave.1.S., Nanshan
Limited
Manufacturing Co., Ltd.District,
ShenzhenShenzhen,
Office BCD 4F,Semiconductor
298-1,
BCDRui Guang Road,(Taiwan)
Corp.
Semiconductor Nei-Hu District,
CompanyTaipei,
BCD 30920Semiconductor
Semiconductor
Limited BCD Huntwood Ave.Corporation
Limited Korea Hayward,
office.
China
8F, No.176,Analog
Advanced Sec. 2, Gong-Dao 5th Road, Corporation
Circuits (Shanghai) East District Shenzhen Office Taiwan
48460 Kato
4F,Road,
298-1,Fremont,
Rui Guang CARoad,
94538, USA District,
Nei-Hu Room CADigital-Empire
101-1112,
Taipei, 3092094544, USA Ave.
Huntwood II, 486 Sin-dong,
Hayward,
Tel:
Room +86-755-8826
HsinChu E, City 7951
300, Taiwan,
5F, Noble Tel:Tel:
R.O.C 3rd Fuzhong Road, Futian District, Shenzhen 518026, China
Center, No.1006, +886-2-2656
+1-510-668-1950
Taiwan 2808 Yeongtong-Gu, Tel
CA :94544,
+1-510-324-2988
Suwon-city, Gyeonggi-do, Korea
U.S.A
Fax:
Tel: +86-755-8826
+886-3-5160181,
Tel: +86-755-8826 79517865
Fax: +886-3-5160181 Fax:Fax: +886-2-2656
+1-510-668-1990 2806
Tel: +886-2-2656 2808 Tel: Fax:
+82-31-695-8430+1-510-324-2788
Tel : +1-510-324-2988
Fax: +86-755-8826 7865 Fax: +886-2-2656 2806 Fax: +1-510-324-2788

Das könnte Ihnen auch gefallen