Beruflich Dokumente
Kultur Dokumente
1. Introduction
1.1 About Leo Palm
Leo Palm is an astrological software which is developed specially for Palm
organizer by Future Point (P) Ltd., the trusted name in the field of astrology.
The organisation promotes research work in various fields like Astrology, Palm-
istry, Numerology, Signology, Occult Sciences, Tantra, Mantra, Yantra etc.
and exposes them to the world.
The user can view charts of a particular horoscope in different styles such as
North Indian, South Indian, Bengali, Oriya and Western. It contains computa-
tions for various systems of astrology such as Parashar, Jaimini, Bhrigu,
K.P., Lal Kitab etc. It is designed to provide the user the facility to go deep
into the study of astrology thereby helping in further research works to be
done with the help of the software.
It support various type of calendars like National, Punjabi, Tamil, Kerala, Nepali,
Chaitradi and Kartikadi with B.C. date provision. Leo Palm Transit allow the
user to graphically see and analyse the planets and their position.
Astrologers can use palm organizer to save thousands of birth details and
addresses, can keep their accounts, can use it as a calculator or as a Date
Book to maintain their daily schedule. They can play games too. For more
details about the Leo Palm visit our web site:
http://www.leopalm.com
Leo Palm 5
1.2 Packing
Leo Palm comes in a very attractive bag alongwith the following items :
1. Leo Palm CD
2. Installation and User Manual
3. License and Password Information
6 Leo Palm
1.5 Know your Palm Top
IR Port
This port is used to exchange data &
applications with any infrared-enabled
Palm Computing Platform handheld
Stylus
Display
Screen
Scroll Buttons
Press the top button to
scroll up and the bottom HotSync Cradle
button to scroll down Connect the cradle to your
computer and the a power
Button and Brightness source. Then place the
Control Palm in the cradle to
Press here to turn your Palm charge it
on and off. Hold it down for a
few seconds to display the HotSync Button
brightness control. Press the HotSync
* You can save battery life button to exchange data
by reducing the brightness between your organizer
level and computer
Application Buttons
Press these buttons to turn on any of
your programmes. You can also create
your own short cuts.
Leo Palm 7
1.6 Getting Connected to Computer
Connect the cradle to a COM(serial) port on your computer and then plug the
adapter into the socket
8 Leo Palm
1.7 Charge Your Palm Top
Leo Palm 9
1.8 Working with Key Board
To write a character:
Follow the path of the letters illustrated in the Graffiti characters graphic. The
starting point is the dot.
Start drawing until you are completed drawing the character. The Palm handheld
recognizes a full range of upper and lowercase letters, digits, punctuation and
special symbols.
10 Leo Palm
1.9 Write Characters & Numbers
vvv
Leo Palm 11
CHAPTER-II
USER FACILITIES :
• Exhaustive computations of horoscope, Varshphal, Matching, Horary
analysis, Lal Kitab and Numerology
• Contains 10,000 years panchang from year 0001-9999
• Option of North, South, Bengali, Oriya and Western chart style
• Option of True Rahu or Mean Rahu
• Supports various Ayanamsa like Lahiri, Raman, K.P., Manu and Sayan
• Various calendars like National, Punjabi, Tamil, Kerala, Nepali, Chaitradi
and Kartikadi
• Graphical view to see and analyse the planets and their position-Transit
• Option for B.C. Date
• Self explained manual
ASTROLOGY:
• Complete astrology computations - Avakhada, Ghat Chakra, Tara Chakra,
Panchang, Shadbala, Ashtakvarga, Shodashvarga, Aspects
• Jaimini and K.P. system computations
• See daily Rahu Kaal, Hora, Chaughariya
• Vimsottari, Yogini, Shodashottari, Dwadashottari, Ashtottari, Panchottari,
Shatabdika, Tribhagi, Char & Kaal-Chakra dasa up to 5 levels (Pran
Dasa)
• Prediction based on birth navamsa, house and planet positions
LAL KITAB:
• Calculations of Planetary degrees & their positions, House positions,
Friendship table, Graha/Rashi phal
• Lal Kitab Dasa
• Computation of kind of Teva like Dharmi, Nabalig & Andha
• Rina to know the balance of previous birth, its effect in this birth & its
remedies
• Planet interpretation and their remedies
• Varshphal to know yearly results & remedies to be done on birth day to
have best results for the year
12 Leo Palm
MATCH MAKING:
• Computation of planet degrees and dasha for both the natives
• Ashtakoot guna milaan according to North Indian, Traditional & Gujarati
systems and manglik dosh compatibility with conclusion
• Compatibility result based on ashtakoot guna and manglik dosh
• Compatibility result on nature, health, finance, children etc.
K.P. :
• View Lagna, cusp or navamsa charts
• Sub lord computations for planets and houses
• Know the ruling planets
• Significator calculation with details
• Option of 1 - 249 or natal horoscope computations
HORARY :
• Option of 1 - 249 for Horary computations
• Opt for Houses and Planets as per question
• Get detailed answer of any questions through Horary Analysis
• Add questions to the horary data bank
VARSHPHAL:
• Option of Varshphal calculations based on Traditional\Modern systems
• Muntha & Varsheshwar calculations
• Dwadash Varga, Harsh Bala and Panchvargeeya Bala
• Mudda, Patyamsa and Vimsottari dasa
• Saham calculations
• Tripataki chakra
• Shodash yoga
• Predictions on Muntha, Munthesh, Varshesh and Varsh lagnesh
NUMEROLOGY:
• Know your Radical, Lucky and Name number, Friendly & Evil numbers
• Your favorites like days, months, years, color, stone, metal, mantra
• Your lucky yantra
• Favorable and unfavorable numbers for changing your name
• Interpretations of your name
• Analysis on your date of birth, your radical and lucky numbers
vvv
Leo Palm 13
CHAPTER-III
3. Installation
3.1 Installation of Palm Desktop Software - Use to connect Palm top
computer with Desktop computer.
3.2 Installation of Leo Palm on your Desktop - Transfer of Leo Palm files
from Leo Palm CD to Desktop computer.
3.3 HotSync Leo Palm Software from Computer to Palm - Transfer of
Leo Palm files from Desktop computer to Palm top computer.
14 Leo Palm
3.1 Installation of Palm Desktop Software
• Insert the Palm Desktop Software CD-ROM into the computer’s CD-ROM
drive given by Palm. If the autorun feature is on in your computer then the
CD will automatically run. If after few moments nothing appears on the
screen then go to My Computer and then select your CD drive and then
double click on Autorun.exe or Setup.exe.
• After running Setup.exe file or Autorun.exe file, some Palm Desktop Software
shows language screen as shown below. There you click on English
language to continue the installation.
Language screen
¥ Some Palm Desktop s/w directly shows the Palm Desktop Installer Menu.
On selecting your desired language it shows Palm Desktop installer screen
as per your Palm Desktop software version, there you click on the Install
button to begin the installation procedure.
• After pressing <Next> button a Setup Type Screen will appear on the screen
as shown below. Press <Next> button to proceed.
• After this Create User Account screen will appear, there you can enter
your name and press <Next> button to proceed. After this a Serial Port
Setup message will appear on the screen, press <Ok> button to proceed.
After this it will start copying files.
• After copying the files it will ask for Palm Computing Product Registration.
Press <Cancel> button for later registration. After this Perform Mail Setup?
screen will appear. Press <No> button to continue.
• After this Setup Complete screen will appear on the screen press <Finish>
button. Finally a HotSync Icon will appear in the tray of Task Bar.
16 Leo Palm
3.2 Installation of Leo Palm on Your Desktop
Leo Palm 17
Figure : 3.2.2 Setup Screen
After Setup screen the Welcome screen (given below) will flash automatically
18 Leo Palm
· Pressing <Next> button shows the Software License Agreement of Leo
Palm (given below).
Press <Yes> button to accept the License Agreement of Leo Palm soft-
ware and press <No> to reject it and exit from setup.
Please note that It is necessary to accept terms and conditions of the
License Agreement mentioned to install the software.
Leo Palm 19
· Pressing <Next> button again will display the Password and Serial Num-
ber information screen (given below). Serial Number and Password of the
software are provided to you alongwith the Leo Palm Software. Now enter
the password given with the software and press <Next> to proceed. Pass-
word is not case sensitive so you can give password either in small or
capital letter. You are allowed 3 chances to enter the valid pass-
word. Press <Exit> to cancel the installation process.
Make sure you have entered the correct password. Setup program termi-
nates at this stage if you enter invalid password in three chances.
You are not allowed to go further if any of the fields is blank or the Serial
Number and Password are not valid. You may contact Future Point for the
valid Serial Number and Password of the software.
· Pressing <Next> button shows the Choose Destination Location Screen
(shown in fig. ). If you want to install the software in the default directory
20 Leo Palm
Figure : 3.2.7 Choose Destination Location dialog box
which is LeoPalm, then press <Next>. If you want to change the des-
tination directory, press <Browse> button. If the destination directory
specified by you does not exist then the installation program will auto-
matically create it.
· Pressing <Next> button lets you specify the Program Folder Name from
where you will be able to read manuals. By default folder name is
‘FUTURE POINT’. You can change this or specify an existing folder.
Leo Palm 21
· Pressing <Next> button will show you Setup Type Screen. In Typical all
the files will be copied to the computer, in Compact minimum files will be
copied to the computer and in Custom user can copy files as per their
choice. (Normally this choice is used when you have less hard disk space
and this must be use by advance user only.)
· If Setup Type is Typical then on pressing <Next> button all the files will be
copied.
· If Setup Type is Custom then on pressing <Next> button Select Compo-
nent screen (as shown below) will appear.
22 Leo Palm
Now press <Next> button. This will copy all the selected files on your
computer and will display a progress indicator which will inform you the
status of the file copying process. You can press <Cancel> button to
terminate the installation process at this stage.
· While installing Leo Palm files it also installs Leo Palm manual on the
desktop computer. This Leo Palm manual is in PDF file. To read this PDF
file Acrobat Reader must be installed. So in the end of the installation Leo
Palm it ask to install Acrobat Reader. If Acrobat Reader is already in-
stalled then press the <Cancel> button or to proceed further press the
<Next> button and follow the onscren instruction.
Leo Palm 23
· After this process, setup program displays the Setup Complete Screen.
Press <Finish> button to complete the installation.
· At the end of the installation it shows a screen for Leo Palm website
www.leopalm.com.
24 Leo Palm
3.3 HotSync Leo Palm Software from Computer
to Palm
(1) Run Palm Desktop software given by Palm
Start -> Programs -> Palm Desktop -> Palm Desktop
Leo Palm 25
· (3) Now press <Add> button to select files.
· (4) Now select all the files where Leo Palm files are kept. By default it is
in "C:\LeoPalm\Install" folder.
Now press <Open> button.
If you also want to install games then also select all the files from games
folder.
26 Leo Palm
· (5) Now press <Done> button.
Leo Palm 27
· (7) Now keep your Palm Organizer in the cradle and press the HotSync
button. It will show you HotSync progress screen.
This will take 10 to 15 minutes on IIIxe, IIIc, Vx, VII and 2-3 minutes on
M500, M505, M515, M550 (Tungsten T), so be relaxed.
Congratulations!
You have successfully installed the Leo Palm Software.
vvv
28 Leo Palm
CHAPTER-IV
Stylus
Leo Palm 29
Leo Palm Icon in Palm Top Lord Ganesh Screen
Input Screen
¥ On running Leo Palm software, the last worked birth details appears on the
input screen.
30 Leo Palm
4.3 Entering Birth Data
4.3.1 To Enter Name
To start entering a fresh birth detail click on / in the bottom line. It
clears the old data & displays the default values of city & its co-ordinates.
You may opt for overwriting the date visible on the screen. Also select
Set 1 or Set 2 click in the data area of name so that cursor is on name.
· First Method - Click on the Keyboard option at the bottom left of
the palmtop with stylus. It will show a keyboard on the screen. Click
on desired alphabets in the keyboard.
e.g Suppose you want to enter Name Arun, click each alphabet with
the stylus and then press ‘Done’ button to return to the input screen.
After that entered alphabets will be displayed in front of the ‘Name’.
· Second Method - You can also enter the name by writing in freehand in
Graffiti area.
· Third Method - Select birth details from the database. For details see
Section 5.1.
Leo Palm 31
4.3.2 To Enter Sex
· On input screen M button stands for male. To enter female just click on
M button. It will become F . This button toggles between Male & Female.
32 Leo Palm
· Second Method
Click on day, then press p to increase, press q to decrease day
Click on month,then press p to increase, press q to decrease month.
Click on year, then press p to increase, press q to decrease year.
This way you can select year from 1 to 9999.
· Third Method
Clicking on date buttons again and again increases its value by 1. If day is
selected as shown below and again if you click on it then its value is
increased by 1. Similarly with month and year button.
This method helps you to carry small increaments in day, month or year
easily.
¥You can only increase day, month & year. But you cannot decrease it.
Leo Palm 33
· Fourth Method
Click on AD/BC or Calendar button as shown below
34 Leo Palm
For entering Hrs/ Min/ Sec, Ghati/ Pal/ Vipal click on there button and then
use Up and Down button to increase or decrease its value. You can also
change (increase) the value of selected button by pressing it again and
Clock button
Increase Value
(Up Button)
Decrease Value
(Down Button)
Zero button
again. For easy operations, two more buttons Clock and Zero are provided.
Clock button is used to see the current time and Zero button is used to set
the value of selected button to "0".
After setting time press the <Ok> button. The time in hours will be displayed
on the Input screen.
· Second Method
Time can also be entered by clicking on the buttons in front of the
button as mentioned in the date option.
Click on hours, then press p to increase, press q to decrease hours
Click on minutes,then press p to increase,pressq to decrease minutes.
Click on seconds, then press p to increase, press q to decrease seconds.
Leo
· Palm 35
· Third Method
Clicking on time buttons again and again increases its value by 1. If hours
is selected as shown below and again if you click on it then its value is
increased by 1. Similarly with minutes and seconds.
This method helps you to carry small increaments in day, month or year
easily.
¥ You can only increase hours, minutes & seconds but you can not decrease
it.
· Fourth Method
User can enter the current time by clicking on the clock button on the input
screen as shown below.
¥On pressing clock button current date will also be displayed on the input
screen.
36 Leo Palm
4.3.5 To Enter Place of Birth
· Enter City
To select city - Press button it will display list of all the cities of the
selected country, beginning with the alphabets you have entered in front of
city (Input Screen). Select the required city from the list by clicking on it.
When you click on the city in the list, it will show the values of state,
district, latitude and longitude at the bottom of the screen.
By default it shows all cities of selected country. To see the list of cities in
a particular state press the button.
Leo Palm 37
On pressing this button it will show a state list as shown below.
In state list you select your desired state and press the <Ok> button. After
pressing <Ok> button only those cities will come in the city list where
state is your selected state.
In city list if any state is selected then state button appears filled like
If no state is selected then it shows state button as . If any state is
selected and you want to see the list of cities for all states then again
press the state button and press button. After this it will show all
the cities and will show state button as .
Leo Palm has a provison for easy searching of new city in the city list
without looking into a long list. Suppose you want to search for a place
"Delhi University" then press the button and then start pressing the
alphabet buttons, in our case press button and then then
and then , then and ... so on. It will automatically select Delhi
University in the list. If you want delete the previous alphabet then press
the button. If you want any other place then before pressing the
alphabets do not forget to press the button. On pressing alphabet
buttons it shows the pressed button sequence in the text area as shown
below -
38 Leo Palm
After the selection of desired city press the <Ok> button.
The city, state, district, latitude, longitude, time correction and zone related
with city will be selected from the database present in the computer and
will be displayed on the input screen.
Press the button if you don't want to change the city.
¥The software for the cities present in the Leo Palm database automatically does
time correction. If you want to change it then press button on input screen, it
will display second screen where you can change as shown below.
Leo Palm 39
4.4 Viewing Horoscope
After entering all the birth details, now it is time to press button for
viewing horoscope. On pressing this button Leo Palm will calculate planetary
position of the given birth details & displays the Lagna Chalit Chart.
40 Leo Palm
Menu1
(Main Menu)
Go back to
Input Screen
Menu2
(Sub Menu)
Change Chart
styles from here
· For changing chart style press N for North Indian, S for South Indian, B for
Bengali, O for Oriya and W for Western Style
For viewing other details of the horoscope click on Menu1 (as shown below)
then select your desired item like, if you want to see Planetary Degrees
then you select Planet/House in Menu1 as shown below.
Leo Palm 41
Suppose you want to see Vimshottari Dasha then Select Dasa in Menu1 as
shown below. By default it shows Vimshottari dasha. If some other dasha is
required then click on menu2 and then select desired dasha.
All dashas are computed upto Pran dasha (5 levels) with hours & minutes.
Jump levels or move dasha forward or backward in any level by single click.
From here
Move forward or backward you can change the level
42 Leo Palm
With the help of Menu1, Menu2 and Menu3 user can see other horoscope
informations. Menu2 shows only those options which are applicable only for
Menu1 simillarly Menu3 shows only those options which are applicable only for
Menu2.
· Select Planet/House option from the Menu1 to view Chalit, Cusp, Cusp &
Sub Significator, Lagna Chart, Lagna-Chalit, Chalit Chart, Cusp Chart.
· Press Avakhada option from the Menu1 to view Ghatak, Seasons, Tara
Chakra, Birth Details and Rahu Kaal.
Leo Palm 43
· Press Shodashvarga option from the Menu1 to view Saptvarga, Shodash
Table, Varga Veda, Vimsopaka in Tabular Form.
· To view Friendship table press Menu1 then select Avakhada and then
select Permanent Friend from Menu2.
44 Leo Palm
4.5 Closing Leo Palm
For saving of battery, it is a good habit to close an application. For closing Leo
Palm, press the exit button (Top right corner) or select exit from menu on
input screen.
vvv
Leo Palm 45
CHAPTER - V
5. Other Features
5.1 Saving Birth Details - How to save/retrieve Birth Details for future use.
5.2 Saving New Cities - How to add new cities if it is not in Leo Palm city
database.
5.3 Calendar - Use different type of calendar like National, Punjabi, Nepali,
Chaitradi etc.. How to switch between AD & BC date mode.
5.4 Default Settings - How to save & retrieve default birth details to save
entering birth detail time.
5.5 Astrological Options - Save/ Retrieve various astrological options like
Ayanamsa, Chart style, True/ Mean Rahu, Varshphal method etc..
5.6 Language Selection - How to change Leo Palm language.
5.7 Leo Palm Backup & Restore - How to take Leo Palm files backup and
restore it.
5.8 Leo Palm Version & Licence - Know about Leo Palm version and your
licence.
Category Name
To save birth details, enter all the birth details like Name, Sex, Date, Time and
Place of birth with Category then click on < "Save Birth Details" button. After
saving the birth data, it will give the message "Birth Details Saved".
46 Leo Palm
While saving the data it is very important to mention the category name, which
helps in retreiving the required birth data from big database. So, Leo Palm has
various in-built categories like customers, film stars, politicians, scientists etc.
You can also add/ delete/ rename categories. For this click on "Edit
Categories..." label in the category list.
· For Retrieving saved birth data Click on button on input screen, a list of
names will be display on the screen. Click on desired name and press <Ok>
button. Birth details of the selected name will displayed on the input screen.
In name list if you are looking for a name which is not in the current category
then select "All" from the category list. On selecting "All" it will show all the
names of all categories. On selecting any name from the list it will show the
category name (Top right - as shown on next page) in which the name exist.
Leo Palm 47
· For deleteing saved birth data press button on input screen, a list of
name will display on the screen. Click on desired name and then click on
Menu button of Palm top or click on the top bar of the Name list. Now
select <Delete Record>.
48 Leo Palm
5.2 Saving New Cities
Leo Palm has a very large database of about 18,000 cities longitude & latitudes.
If a city is not in our database then it also has a feature of adding new cities.
To add or delete city, select Country from the Country List, then select State
from the State List after that type your new city in front of city button. Also type
Longitude and Latitude on the input screen.
Leo Palm 49
If you want to modify your saved city then select your city from the city list,
make the changes on the input screen and press ADD / DELETE CITY button
and now select ADD city then "Ok" button. Now this time the message will be
"CITY UPDATED" will be flashed after saving.
Note that city names ending with "*" only can be deleted. This protects
inadvertant deletion of cities from the master file.
50 Leo Palm
5.3 Calendar
By the option of Calender in Leo Palm the user can not only follow the popular
Gregorian method for entry of dates but he can enter the dates according to
various calenders mentioned below. Accordingly user may obtain Gregorian
dates equivalent to other calenders.
Similarly user can change Gregorian dates in other calender dates of national
ephemeris. The 3 Indian Calender methods as described below are popular.
1. National Calender : In national calender there are 12 months Chitra,
Baishakh etc. The year begins with Chaitra and ends with Phalgun. The leap
year is similar to Gregorian system. New year starts on 22 March but in leap
year it begins on 21 March. The days in 12 months are as below .
Baisakh to Bhadrapad, all months have 31 days. In other months there are 30
days. The Chaitra has 30 days but in leap year it has 31 days. The year ac-
cording to Vikram Samvatsar ahead to Gregorian calender by 57 years.
2. Solar Calender : The Punjabi, Bengali, Nepali, Tamil and Kerala calenders
are solar calenders. In all these calenders the month begins with entry of Sun
in a zodiac sign. These have this 1 to 30 sometimes there are 29 or 31 or even
32 days in a month.
The Leo Palm incorporates Solar Calender Systems where beginning of month
varies according to different rules of different provinces.
• Punjabi Calender System : If Sun enters a sign by transit after sunrise
and before next sunrise, that day is 1st day of month.
• Nepali Calender System : The dates of Nepali calender are calculated
similar to Punjabi calender. However if Sun enters a sign after midnight
then month’s start will be from next day. If Sun’s entry is before midnight
then month will begin on the same day.
• Bengali Calender System : If Sun enters next sign before midnight then
next ay is first day of month.
The point to be noted is that there is difference of one day in Nepali and
Bengali calenders. The Bengali calender begins after one day.
• Tamil Calender System : The calculations is Tamil system are similar to
Punjabi calender. The only difference is that if entry of Sun is before sunset
then month begins on the same day otherwise on the next day.
Leo Palm 51
• Kerala Calender System : Kerala system is similar to Punjabi calender.
The difference is if Sun enters a sign before noon (18 Ghati) then month’s
start is on the same day otherwise month begins on next day.
The Sunrise method is followed by in Orissa and Punjab for fixing the start of
solar month. This is called the day of Sun’s entry in a sign by transit.
The rule of 18 ghati is followed in Kerala, sunset method in Tamilnadu whereas
the midnight method is adopted in West Bengal.
3. Lunar Calenders : The Chaitradi and Kartickadi calenders operate accord-
ing to motion of Moon. These calenders also comprise of Chaitra etc 12 months.
Every month has two fortnights Shukla (Bright) and Krishna (Dark). There are
15 dates (tithis) from Pratipada to Poornima or Amavasya. Sometimes the a
month is extra or less (Kshaya). The dates are also extra of kshaya. There are
following differences between the two varieties of Lunar calenders.
• Chaitradi Calender : In this system the year begins on Chitra Shukla
pratipada. Here the samvatsar is 57 years more than a Gregorian year. At
the time of beginning of year 15 days of Chaitra month are already over and
only 15 days remain. The month begins in dark fortnight and ends on
poornima (Full moon).
• Kartikadi Calender : In this system the new year begins on Shukla
pratipada of kartik. There are two fortnights in every month. First shukla
(Bright) Paksha and then Krishna (Dark) paksha. The year begins on next
day after Diwali. According to chaitradi Calender the Diwali falls on Kartik
Amavasya while according to Kartikadi system Diwali falls on Ashwin
Amavasya.
The Leo Palm incorporates 8 types of solar calenders. These can be operated
by option available below birth date on Main Screen as in shown on the screen.
Here just after entry of gregorian date, the year, month and Date of chosen
calender system are calculated. Similarly any date available in another cal-
ender system can be obtained in gregorian calender. The year may be obtained
according to samvat or shak system that have a difference of 135 years.
Similarly in Bengali calender, following relationship between Bengali year and
samvat exists
Bengali year = Samvat - 650
52 Leo Palm
In Leo Palm various calendars are available like National, Punjabi, Tamil, Kerala,
Nepali, Chaitradi and Kartikadi. To open Calendar click on calendar button as
shown below
In Leo Palm calendar, on changing the Gregorian date its corresponding calendar
value or vice-versa comes automatically. The moment user change the day,
month or year its corresponding calendar value appears. The various calendars
list is shown below. To see the particular calendar just select that desired
calendar from the calendar list.
User can also increase or decrease the value by using navigation keys
Leo Palm 53
¥ On pressing clock button Current date will be displayed along with its
corresponding calendar value.
After selecting the desired calendar or date press the <Ok> button. On Input
screen only Gregorian date will be displayed.
AD/BC Date
In Leo Palm user can also enter BC date. To enter BC date open calendar and
then press then <AD> button which is at top right corner of the screen. On
pressing this button the “AD” label will change to “BC” which tells that now you
are in BC Mode. After that press the <Ok> button. On input screen It will show
“BC “ at the top of the calendar icon as shown below
Now if the user in BC mode then on pressing the show button Leo Palm confirms
the user that you are In BC Mode as shown below.
To continue press the <Yes > button else press <No > button. In show, dasha
dates appears with dots “.” in place of “/” which signifies that the entered date
is in BC.
54 Leo Palm
5.4 Default Settings
In Leo Palm user can set or see default settings on a single click. To see
default values click on New data/ Show Defaults button as shown below.
On Pressing this button default country, city, state, District, Latitude, Longitude,
Zone, Sex values displays on the input screen. It also clears the Name text
area and shows current date and time as date of birth and time of birth as
shown above.
Leo Palm 55
5.5 Astrological Options
· On single click, Leo Palm astrological option can be set according to
user need. Click on "Astrological Option" button to view / change options.
It will display second screen with various options.
You can have same options for two sets or can have different options for
them. Normally we use same options for two sets but sometimes we
may use different options for two sets when we want to compare results
of one horoscope in two options like in two different ayanamsas.
Options like -
· Two types of calculation modes
-In accurate mode computes upto seconds
-In fast mode seconds are rounded off
· Choose Ayanamsa from the drop down list, Lahiri, Raman, KP, Manu &
Sayan.
56 Leo Palm
· Chart styles in North Indian, South Indian, Bengali, Oriya and Western.
· Opt for True and Mean Rahu depending upon your need.
· Hide Uranus, Neptune and Pluto, if you don’t want them to visible in
charts.
Leo Palm 57
5.6 Language Selection
At present Leo Palm is available in two languages - English and Hindi. To
change language click on Leo Palm - which is on top of input / show screen or
menu button of Palm Top. It will open package menu and there you select your
desired language as shown below.
58 Leo Palm
5.7 Leo Palm Backup & Restore
5.7.1 Backup data
For backup and restore Leo Palm files, Palm Desktop software must be installed
on the desktop computer. If it is not installed then first install the Palm Desktop
software from the CD given with Palm Handheld. See section 3.1 for Installation
of Palm Desktop Software. The 3 simple steps for backup are
On pressing the hotsync button palmtop starts synchronizing files with desktop
computer. By default Palm Desktop software keeps the Palmtop files in
“C:\Palm\USERNAME\Backup” folder including LeoPalm files. The details of
Leo Palm file is given below
To install the upgrade version of Leo Palm either don’t install LeoPalm05.pdb
file (Birth Detail file), LeoPalm03.pdb (City file), LeoPalm0.pdb (All Master file)
or after installing all the files from upgrade version, again install leoPalm0.pdb,
leoPalm03.pdb and LeoPalm05.pdb from the backup folder of Palm Desktop
folder.
60 Leo Palm
5.8 Leo Palm Version & Licence
To know about Leo Palm version and its Licence go to input screen click on
title bar or menu button, it will open a menu and then click on <Help> it will pop
up a list as shown below.
In about Leo Palm screen user can know the version of Leo Palm alongwith the
address, phone and fax no., email & website details of the company who has
developed this software.
In Leo Palm Licence screen user can know the information about the licencee
of Leo Palm like Name of the person, Customer Serial No. and Date of Last
updation.
Leo Palm 61
CHAPTER-VI
6. Packages
6.1 Astrology - Traditional and modern system of making horoscope.
6.2 Matching - Check the matching compatiability for marriage, based on
mangalik consideration and ashtakoot guna match.
6.3 Varshphal - Horoscope of the year based on tradional/modern system.
6.4 Horary - Get detailed answer of any question through horary analysis.
6.5 Lal Kitab - Know Rinas, its remedies, Grahphal etc. as per Lal Kitab.
6.6 K.P. - Know the Ruling planets, Signifaicators of house and planets etc.
6.7 Numerology - Know you Radical, Lucky, Name and other favourable &
non favourable numbers.
6.1 Astrology
Whenever user runs Leo Palm software then it automatically starts the soft-
ware in astrology package. It shows LeoPalm-AS on the top bar of the input
screen, which indicates that you are in Astrology package.
After entering the birth details in input screen and pressing show button it
shows Lagna Chalit Chart. To view other details of horoscope, click on Main
Menu (Menu1) it shows Charts, Planets/House, Dasha, Avakhada,
Shodashvarga, Shadbala, Ashtakvarga, KP System, Jaimini, Predictions, Rem-
edies and Transit in a list. On selecting any option from Main menu, list in sub
menu will come according to selected Main menu. If you select "Planets/House"
from Menu1 then Sub menu shows Planet Degrees, Planet Sub, Pln-
Significators, Ruling Planets,Chalit, Cusp & Sub, Hse-Significators, Lagna Chart,
Lagna-Chalit, Navamsa Chart etc. as shown below.
62 Leo Palm
To see dasha click on Main menu and select Dasha. It will show you Vimshottari
dasha as default but many other dashas are also available upto 5 level like
Shodashottari, Dwadashottari, Ashtottari, Panchtottari, Shatabdika, Tribhagi,
Yogini Char and Kal Chakra dashas as shown below.
For changing level in dasha either you click on 1 to 5 numbered buttons which
are placed on bottom of the dasha or click on desired row to see the next level
as shown below.
If you want to see previous or next dasha then click on arrow button placed at
bottom of the dasha screen as shown below
Level
To view other astrological aspects like Ashtakvarga click on Main menu and
select Ashtakvarga and then click on Sub menu there you can select desired
table for Sarvashtaka, Prasthar, Trikona Shodhan, Ekadhipatya Shodhan and
Shodya pinda.
Simillarly if you want to see the prediction then select Prediction in Main menu
and select your desired reading like Navamsha, House and Planet reading.
Leo Palm 63
To see Sarvashtaka Chart click on chart button in Sarvashtaka table as shown
below. If user wants to go back in Sarvashatak table while using Sarvashtaka
chart then just click table button at bottom of the chart as shown below.
In Leo Palm One short cut provision is there for seeing planet or house reading.
In astrology package if user clicks on planets or houses in Lagna Chart or
Lagna Chalit Chart it shows predictions.
¥ This is not all in Leo Palm astrology package. Check each Main Menu,
Sub Menu and Sub-sub Menu in every package.
64 Leo Palm
Yoga
Different kinds of yoga are formed in every horoscope. In “LeoPalm” we have
considered the formation of about 300 important yoga. The software does all
the required calculations based on the horoscope of the native.
To get the details of yoga formed in one’s horoscope, just select “Yoga” option
from the main options list. A list of yoga formed is displayed on the screen.
If the numbers of yoga formed in a horoscope are more and don’t fit in one
screen, then a “Down” arrow appears at the bottom of the screen. User can
click on the down arrow to see the next list of yoga. To see further details of the
yoga, just click on the yoga name. Another screen will appear which will show:
• Rule for the formation of the yoga.
• Related planets
• Yoga probability
There is a “Shloka” button at the right side bottom of the screen. Now press
this button to see the related shloka along with book reference. Again, there is
Leo Palm 65
a “Result” button at the right bottom of the Shloka screen. Click on this button
to see the result of the yoga formation.
Click on the “Details” button to return back to the yoga details screen. Now
user has completely viewed the details of yoga. To see details of other yoga
formed, there are two options with user. Either click on “x” button at the top
right side of the screen and again the yoga list screen will appear. Alternatively,
click on the “Up” or “Dn” button available at the top of the screen to see the
previous or next yoga details respectively.
Note: The Shloka and book reference are in “Hindi”
Dasa Reading
Dasa Reading is available for Mahadasa and Antardasa i.e. dasa level 1 & 2
for Vimsottari dasa.There are two methods to view the Dasa and Antar Dasa
predictions.
Method –1
Select “Predictions” from the main options and then “Dasa Reading” from
the second option as shown below:
66 Leo Palm
When user click on the “Dasa Reading” option, a list of planets along with the
corresponding dasa period appears on the screen.
The date shown in the list is the ending date of the dasa period. If user click on
the date the list is re-calculated and filled for the Antar Dasa of that planet.
If user again clicks on the dasa date, then list is again re-calculated and filled
for the dasa level-1 i.e. Mahadasa. To get the Mahadasa or Antardasa predictions,
just click on the planet name. The prediction screen will appear on the screen.
With help of “Up” or “Dn” arrows provided at the top the screen user can view
the prediction of the previous or next dasa period respectively. Alternatively,
user can click the “x” button to return to the screen where a list of the dasa
planets and the dasa date is available.
Leo Palm 67
Method-2
Select “Dasa” from the main options. Vimsottari dasa of second level will appear
on the screen.
If user clicks on the date, then dasa of the next level is shown and if clicks on
the planet name, Dasa Reading of that planet is available on the screen.
To view the Dasa Reading of the Previous or Next dasa period just click on the
“Up” or “Dn” button as discussed in method one.
68 Leo Palm
Transit Reading
To see the transit reading just select “Predictions” from the main options and
then after “Transit Reading” from the sub-options.
Transit reading for “Jupiter” is shown by default. Here the Year next to Planet
Name is taken as the Varshphal Year selected in the “Astro Options” section.
The prediction for the next/previous year can be viewed by clicking on the “Up”
or “Dn” arrow. To get the predictions for the “Saturn” and “Rahu”, close the
prediction screen by clicking on “x” and select the desired planet from the list
by clicking on the planet.
Leo Palm 69
Transit
One of the main utility in Leo Palm is “Transit”. Transit allows the user to
graphically see and analyze the planets and their positions. To open transit,
click on menu1 (Main Menu) in show and then select “Transit “ as shown
below .
In transit user can control the direction, speed of movement and zodiac. User
can analyze the planet movement by minute by minute, hourly, daily, weekly,
monthly and yearly. By default transit starts the movement based on date of
birth, time of birth, latitude, longitude and zone specified on input screen.
In Leo Palm there is also a provision to stop the transit. Just click the <Pause>
button which is at bottom right of the screen.
70 Leo Palm
In Leo Palm 5 type of zodiac are available like Movable, Fixed, X-Y Co, Western
and W-Fixed. To change the Transit Settings click on Zodiac button. Similarly
to change the Speed and Direction click on their buttons. If user want to see
the transit for a particular date and time then set the desired date and time in
Transit Settings screen. After setting the desired option press the <Ok> button.
¥ Use Up and Down arrow button to change the date and time
Leo Palm 71
Other screens of Astrology
72 Leo Palm
Leo Palm 73
74 Leo Palm
Leo Palm 75
76 Leo Palm
Leo Palm 77
78 Leo Palm
Leo Palm 79
6.2 Matching
This package is used for Matchmaking of Male and Female. For switching to
any package, Matching in this case either you click on LeoPalm - which is on
top of input/show screen or you click on Menu button of Palm Top. It will open
a Package Type Menu, there you can select your desired package. Select
"Matching" in this case.
LeoPalm-MA on top of the screen indicates that you are in Matching package.
¥ Set-1 is for Male details, Set-2 is for Female details. Set-1 and Set-2
are the 1 2 buttons on the input screen.
80 Leo Palm
Click on Set-1 and then enter your Male birth details set the gender to M .
Now click on Set-2, 1 2 after this enter the female birth details and set the
gender to F . Now press the Show button. It will show you Ashtkoot Guna
Matching Table. To see Manglik dosh compatibility and conclusion, click on
Sub menu and select Manglik or Conclusion.
* Leo Palm software also considered the manglik dosh cancellation aspect in
Manglik dosh compatibility.
You can also see the prediction about the compatibility of both Male and Fe-
male about their nature, finance and relationship with In-laws.
In matching we have various matching styles like Gujrati, North Indian and
Traditional. By default Leo Palm works on Traditional style. For opting other
style, click on "Astrological Option" button (See Section 5.5). In astrological
options screen change the matching style by clicking on selected method.
Then press <Ok> button
Matching Style
Leo Palm 81
Other screens of Matching
82 Leo Palm
Leo Palm 83
84 Leo Palm
6.3 Varshphal
This Package is used for making Varshphal for specified year of the native. It
gives you Natal and progressed chart based on Tajik system. In Leo Palm
Set-1 is used for Natal and Set-2 is use for Progressed. It means if you will
enter birth details of the native in Set-1 then Set-2 will show you progressed
value.
For running Varshphal package go to Package type menu (as discussed ear-
lier) and select Varshphal. It will show you LeoPalm-VP in the title bar. Now
enter your birth details in set-1 and for entering year for varshphal, go to astro-
logical options and change prediction year as Year for Varshphal as shown
below.
Prediction Year
In Leo Palm you can make the Varshphal in four different methods.
1 - Old Method
2 - Sayan Solar Return Method
3 - Nirayana Solar Return Method
4 - Exact Sun degree.
Old method is the default Varshp9999999hal Method used in Leo Palm and
this can be change in Astrological Options as shown above.
Leo Palm 85
Now to make Varshphal click Show button on input screen. This will show you
Lagna chart for Progressed year. You can see other Varshpahl aspect like
Degrees for Planets, Birth details, Bala, Varsheshwar, Saham, Dasha, Predic-
Progressed Details
tions and Yoga by selecting desired options in Menu1. Like to see Varsheshwar
determination click on Main Menu and then select Varsheshwar as shown
above -
Year for Varshphal can be changed while viewing the horoscope by selecting
"Change Year" option from Main-Menu or by clicking on year button shown at
top of the screen like 2003 in above current screen. On pressing this button a
new screen will appear as shown below -
Press <OK> button after making changes. It will display the output with new
setted Varshphal year.
86 Leo Palm
Other screens of Varshphal
Leo Palm 87
88 Leo Palm
Leo Palm 89
90 Leo Palm
6.4 Horary
In this package birth details are not required. It means if you don't have the
birth details then in Vedic Astrology "Horaray Analysis" is one of the solution.
For running Horary package go to Package Type menu and select Horary (as
shown below in Screen 1). On selecting Horary it will show Horary Master
Screen (as shown below in Screen 2). Here you can select your question. To
Screen 1 Screen 2
select question click on Question button, it will open a list from there you can
select your question. Question in Leo Palm are properly grouped so for that
Category button is there. So first select your category and then question from
the question list. Every question is based on concerned houses and planets.
In Horary Master you can also add/ delete/ modify questions. For adding new
question click on New button and select an existing category or type a new
category then type your new question. Every question has concened houses
and planets so or entering houses, click on House button, it will open a new
screen there you select concerned houses and press <Ok> button. Similarly
for entering planets click on Planet button, it will open a new screen there you
select concerned planets and press <Ok> button. After entering Category,
Question, Houses and Planets press the Save button.
For deletion of existing question select the desired category & question and
then press <Delete> button. On pressing <Delete> button it will ask for delete
confirmation, press yes if you are sure else press No.
Leo Palm 91
The screen for Horary House Selection and Horary Planet Selection are given
below.
For viewing the results of horoscope select the desired question from the Horary
Master, press the<Ok> button. Now if you are in Input Screen then press the
<Show> button. It will display you the results.
In Horary Package enter current date as date of question in date of birth, enter
current time as time of question in time of birth and place of question in place
of birth. After this press the Show button, it will display you the result.
In Show screen you can also change your question. For that click on Main
menu and then select "Set Question" it will open Horary Master there you
select your new question and press <Ok> button. It will show you the result of
the question.
92 Leo Palm
Other screens of Horary
Leo Palm 93
6.5 Lal Kitab
To run Lal Kitab package open Package Type menu (either from input screen
or from show screen) and select Lal Kitab. It shows LeoPalm-LK on the top
bar of the screen. If you are in Input Screen then enter your birth details and
then press Show button, it will show you Lal Kitab Chart. If you are in Show
screen then no need of entering birth details again in the input screen. It will
automatically consider the previous birth details.
Lal Kitab is used for knowing the debts of your previous birth like debts of
mother, father or self. For that click on Main Menu and select Debts it will show
you the summary. To know full details of debts with their remedies, click on
Sub Menu and select the desired option like if you want to know the Debts to
your mother then select Mother in Sub menu.
94 Leo Palm
Lal Kitab also tells that coming year is favourable or not. For that it tells that
which planet is Andha, Soya, Good or Bad. For that click on Main menu and
then select Varshphal. It will show you the Varsh Planets as shown below.
For viewing Lal Kitab Varsh Predictions based on Varsh Planet select "Varsh
Prediction" in Sub menu when Varshphal is selected in Main Menu. If you want
to change the Varshphal Year then click on Varshpal Year button or select Change
Year from sub menu, it will display a "Set Varshphal Year" screen. There you
change Varshphal year by pressing up or down button as shown below.
Leo Palm 95
96 Leo Palm
Leo Palm 97
6.6 K.P.
To run K.P. package open Package Type menu (either from input screen or
from show screen) and then select KP. It shows LeoPalm-KP on the top bar
of the screen. If you are in Input Screen then enter your birth details and then
press Show button, it will show you Planet degrees with their Rasi Lord,
Nakshatra Lord, Sub Lord and Sub-Sub Lord as shown below.
¥You can enter desired KP No. between 1 - 249 only after pressing Show
button.
Leo Palm consider "0" as a default value for KP No. To change KP No. click on
Main menu and then select "Change KP No.". It will show you a screen as
shown below there you can change the KP No. with the help of Up and Down
buttons.
After changing the desired KP No. prees the <Ok> button, it will display you
the screen according to the new KP No. Leo Palm has a provision for switching
98 Leo Palm
between values for KP No. "0" and your selected KP No. For that click on KP
Number button as shown below. This button is a toggle button.
KP No. Button
To view other tables and charts like Cusp, Significatores, House Significator,
Ruling Planets, Lagna Chart, Lagna-Chalit, Cusp Chart, Navamsha Chart and
Significator details. Click on Main Menu and select your desired option, as
shown below for Significators.
Leo Palm 99
100 Leo Palm
Leo Palm 101
6.7 Numerology
To run Numerology package open Package Type menu (either from input screen
or from show screen) and then select Numerology. It shows LeoPalm-NU
on the top bar of the screen. If you are in Input Screen then enter only your
name and date of birth and then press Show button, it will show your Radical
No. with Lucky no., Namaank and its lords, Friendly no's., Evil no's. and
Neutral No's. as shown below.
To view other aspects in Numerology click on Main menu. If you want to see
your favourite yantra then click on Main menu and select "Fav. Yantra". It will
show you your favourite yantra as shown below.
Leo Palm has many other numerological aspects like Significant years, Ben-
efic Age, Favourite days, Favourite Months, Favourite Dates, Favourite Stone,
Favourite God, Favourite Metal, Favourite Metal, Favourite Color and Favorite
Mantra.
Similarly to see prediction based on Date of Birth, Name, Lucky Number and
Radical Number click on Main Menu and select Prediction after that click on
Sub Menu and select your desired option as shown below.
Top Heading
Left Heading
Report Text
Prediction
Text
Bottom
Notes
Bottom Totals
Chart Lines
M enu
Selected
Foreground
O
b
j
e Objects
c
t
s
Menu Menu
Foreground Background
Field Text
Highlight Field Text
Field Text Field Caret FGround Highlight BGround
l
Field
Text Screen
Lines Border
+
Title Bar
Alert
Frame
All Rashi names numbered from 1 to 12 - Aries, Taurus, Gemini, Cancer, Leo,
Virgo, Libra, Scorpio, Sagittarius, Capricorn, Aquarius, Pisces are displayed in
numbers as below.
Rashi Numbers
(All Circles)
In Astrologer Master user can Add / Modify / Delete its own footer. To open
Astrologer Master, tap on Masters in input screen and then select “Astrologer
Master” from the list, which will show Astrologer Master screen as shown below
Add Astrologer: To add new Astrologer, press the <New> button in Astrologer
Master. Pressing <New> button will clear the Astrologer name, Line1, Line2
and Line3 text area and text cursor will blink on Astrologer Name. Now enter
Astrologer Name, Line1, Line2 and Line3. After entering all the details press
the <Save> button, it will show the Saving Confirmation Dialog. Press <Yes> to
continue or <No> to cancel.
Delete Astrologer : To delete a footer first select your desired Astrologer from
the Astrologer name list and then click on menu button of Palmtop or click on
Astrologer Master Title. On pressing menu button select “Delete Astrologer”
from the menu list after that it will show the confirmation dialog. There you
press <Yes> to continue or press <No> button to cancel delete Astrologer.
In Page Master user can define a page for printing. Total number of screens in
a page and contents of the screens are set here. User can save his page by
giving some page name. This page name is used in the Model Master while
defining a model. There are some pre-defined pages, which are being provided
with the software. These pages starts with “~” character. Also user can't modify
the standard pages supplied with LeoPalm which start with “~” character.
Total Screens: On a single A4 size Leo Palm can print maximum 12 screens
as shown in sample print. If total screens are more than 12 then it will print
multiple pages. User can opt for minimum 1 screen and maximum 99 Total
Screens. To change the Total number of screens, use the navigation buttons
in front of Total Screens. To see the contents of each screen press the
navigation buttons in front of Screen No:. Each screen has its own
parameters like Set No, Menu1, Menu2, Menu3, Print Screen, Extra Option1
and 2. Detail of each parameter is explained further.
Menu1, Menu2, Menu3 and Set No are same that we use in Show as shown on
next page.
Menu1 is the main menu, Menu2 is the Sub Menu and Menu3 is SubSub Menu
in show. To change the contents of a screen just select the desired value from
the Menu1, Menu2 and Menu3 list.
Print Screen: In Leo Palm most of the outputs are single screen but in some
cases it comes on multiple screens like in Ashtakvarga tables and predictions.
In case of predictions we don’t know the total number of screens, so to handle
this “Print Screen” option is there. While printing if somebody wants to print
only a particular screen or all the screens of predictions then for that change
the value of “Print Screen” by using navigation buttons in front of “Print Screen”.
If all pages are to be printed then set it “All” otherwise set the desired screen
number. Like if “All” is select then it will print all the screens of predictions and
if 1 is set then it will print the first screen of that prediction, if 2 is set then it will
print the second screen of that prediction and like.
In Leo Palm each page is limited to Package Type. So before adding new page,
proper Package Type must be selected. User can select his desired package
from Package list in Page Master.
Add Page: To add new page press the <New> button. Pressing new button
will clear the page code text area and will set “None” in Menu1, Menu2 and
Menu3 of all screens . On pressing <New> button cursor will blink on Page
Code. Now enter your Page Code. After that set “Total Screens” according to
your page and set all other options for each screen like Set No, Menu1, Menu2,
Menu3, PrintScreen, Extra Option1 and Extra Option2. After setting all the
parameters now press the <Save> button, it will show the Saving Confirmation
dialog. Press <Yes> to continue or <No> to cancel.
¥ You can also save existing Page with a new name. For this select your
Page Code from the Page Code list and then enter a new name in the Page
Code text area and then press the <Save> button.
Delete Page : To delete a page first select your desired Page Code from the
page code list and then click on menu button of Palmtop or click on Page
Master Title. On pressing menu button select “Delete Page” from the menu list
which will show the confirmation dialog. There you press <Yes> to continue or
press <No> button to cancel delete Page.
Adding a Model : To add a new model, click on the <New> button, select the
desired package type from the available package options at the top of the
screen. Give some model code to name your model.
Now select a page from the left side list box by clicking on it, and press the
button to select the page to the model. When the button is clicked the
selected page appears in the right list box. Press <Save> button to save your
model.
Modifying a Model : To modify a model, first select the package type from the
package options and then select the model code from the list of saved models
for the selected package type. Now to add or remove pages from the selected
pages list box follow the method described above.
Note: User can’t modify the models supplied with the “LeoPalm” software that
begin with the “~” character.
Deleting a Model : To delete a saved model, just click on the menu bar at the
top of the screen and select “Delete Model” menu option. Software ask for your
confirmation of deletion by giving the message “Are you sure?”. Click on the
“Yes” button, for your confirmations for deletion else press “No” if you have
changed you decision for the deletion of the model.
Page Name : Page Name is the name used to retrieve saved pages from the
database.
Page Width : Page Width is the total width of a page in inches like in ‘A4’ size
page the total width is 8.268 inches.
Page Height : Page height is the total height of a page in inches like in ‘A4’
size page the total height is 11.693 inches.
Page Margins : Page marginis the area where where nothing will be printed.
So while printing total printable width area is the Page Width -Left Margin –
Right Margin and total printable height area is the Page Height -Top Margin –
Bottom Margin.
Screen Rows & Cols : Leo Palm prints multiple screens on a single page as
shown in sample print. So by default it prints 12 screens in 4 rows and 3
columns on a A4 size page. If user wants to print upper half of the page then
reduce the number of screen rows.
It prints Leo Palm version name like “Leo Palm V3.0”, Model Code like “H0”,
name of the person whose horoscope is this like “Sample” and date on which
the horoscope is printed. By default Leo Palm prints Header information. If user
does not want to print then just click on header button to select “No”. This
button is a toggle button between “Yes” and “No”.
Footer : Just like header footer prints at bottom of every page in the horoscope
as shown below.
In footer user can print his information like company name, address and phone
number etc. This information comes from astrologer Master. To change the
footer select desired Astrologer from “Astrologer Master”. By default Leo Palm
prints Footer at bottom of the page if user does not want to print Footer then
just select “No” by clicking on Footer button. It is a toggle button between “Yes”
and “No”.
Border : This option is a toggle between “Yes” and “No”. If user wants to print
border outside the horoscope then option must be setted “Yes”. Select “No” if
user does not want to print border outside the horoscope. See sample horoscope
for border.
As in other Masters user can Add/ Modify/ Remove Pages in Page Setup.
In Page Setup, Page Name is the name given to user settings made in Page
Setup.
Add Page : To Add a new Page, make the settings, give a name to the page
and then finally press the Save button. If the page name already exist then it
will be over written by new settings.
Delete Page : To delete a page, first select your desired page from the Page
Name list and then click on menu button of Palmtop or click on Page Master
Title. On pressing menu button select “Delete Page” from the menu list. After
that it will show the confirmation dialog, there you press <Yes> to continue or
press <No> button to cancel Delete Page.
¥ Last Selected page name will be used for printing on pressing the <Ok> button
in Paee Master.
Connection Type : There are three options for connection type “Converter”,
“Infra Red” and “PC”. As it is obvious by name in converter option a serial to
parallel converter is used for printing. In infra red option printing is possible with
that printers that have infra red support. Some infra red to parallel converters
are also available in the market which can also be used. If the connection type
is PC, then printing is done through personal computer. The palmtop is connected
to the computer through the HotSync cradle. A printing program is installed on
the desktop computer, which controls the printing through the PC. The program
is provided along with the “LeoPalm” software and installed in the PC when
user installs the software.
In case of “Character” print type, the printing program captures contents of the
screen. Then printing program uses the desktop True Type fonts to display and
print the contents of the palmtop screen as per the printing modal. In this type
the display and print quality is better than the “Screen Capture”. User can also
take color printouts through Leopalm, for that he should have colored palmtop
and color printer.
Delay : Printer delay is the setting required only when the printer is not able to
print properly. By default is should be 0. To set the printer Delay always start
with 0, save it and then take the printout. If the problem persist then again open
the Printer master and increase the Delay value by 1 either by clicking on
Delay value or by Delay navigation buttons. Repeat the process till the problem
is not solved.
Print multiple lines : Print multiple lines is also a printer setting used for
printer adjustment. Normally for Laser printers set it ‘Yes ‘ and in other printers,
set it ‘No’.
¥ Pressing the New button will clear the printer Name and sets Delay value
to zero. vvv
Modify Printer : To modify the Printer settings, first select the desired Printer
Name from the list and then make required changes and after that just press
the <Save> button and your printer settings will be updated.
Delete Printer : To delete a printer first select your desired Printer from the
Printer name list and then click on menu button of Palmtop or click on Printer
Master Title. On pressing menu button select “Delete Printer” from the menu
list. After that it will show the confirmation dialog, there you press <Yes> to
continue or press <No> button to cancel Delete Printer.
¥ Last Selected Printer name will be used for Printing on pressing the <Save>
button in Printer Master.
8. Printing
Leo Palm is a first astrological software for handheld computers which has
printing facility. In Leo Palm printing can be done by three ways, one is through
by IR (InfraRed) port, second is through by cradle using desktop computer
and the third is through Palmtop cradle using convertor. In first method no
cable is required where as in third method appropriate data converter is required
according to your palmtop model and printer model.
1st Method : If you want to take printout through IR port then your printer must
have IR Port. If it doesn’t have IR port then you can attach an external (IR to
Printer) device which will add the IR printing facilities to the printer.
3rd Method : For taking printout through Palmtop Cradle you need a converter
according to your palmtop model and printer model. If you have Palm IIIxe, IIIc,
Vx, VII or any other model having serial connector at one end of the palmtop
Cradle and if you have printer with Parallel port then a Serial (RS 232) to Parallel
port converter is required. If your printer has Serial port then no converter is
If you have Palm M505, M515, Sony CLIE or any other model having USB
connector at one end of your Palmtop Cradle and having Parallel port Printer
then use either first or second method.
Palmtop
On Cradle
Printer
Convertor
¥ While buying the converter make sure that the converter is Palm compatible
as well as printer compatible.
After that a Print Confirmation dialog will appear on the screen as shown below
Now press the <Yes > button to continue or <No> button to Cancel.
Leo Palm Print Manager is the printing program, which controls the printing
through PC. Through print manager software user can save the horoscopes,
which are downloaded, to PC from handheld through print command. The
horoscopes are saved in a file with “pdb” extension. User can also open these
saved horoscopes and can view on the screen or print to the printer. Different
zoom factors are provided to enlarge the horoscope on the screen. The horoscope
can be zoomed up to 200%. Print manager also gives facility to view multiple
horoscopes at a time on the screen and for that windows can be cascaded or
tilled as per the requirement of the user. If a horoscope consists multiple pages,
then “Move first”, “Move Previous”, “Move Next” and “Move Last” navigation
buttons can be used to navigate the pages.
The print manager software has different options as shown in the figure. These
are:
Open Horoscope – With “Open” option user can open the saved horoscope.
On selection of this option from the “Options” menu option, a popup window
opens for the file selection. Here user can select the desired file path and there
after the file which contains the horoscope data.
Save Horoscope – As discussed above, user can save the horoscope data in
a pdb file. Just select the “Save” menu option from the Options menu. Select
the desired path for saving file. Give some appropriate name to the horoscope
data and click “Save” button.
Print – Use this menu option to print the horoscope to printer. User can print
the horoscope, which is currently visible on the screen. The print manager
asks for the confirmation. If user confirms by clicking on “Yes” then the horoscope
is printed to the printer. While printing, print manager uses the default printer
and printer settings.
Always Show Horoscope – When this option is selected and user gives the
print command from the handheld, the print manager software captures the
data and show the horoscope on the screen. User can also print this horoscope
by selecting the print option from the options menu.
Always Print Horoscope – When this option is selected and user gives the
print command from the handheld, the print manager captures the data and
directly prepare it for printing without showing it on the screen. If “Confirm before
printing” option is on, then print manager confirms before printing the horoscope.
Confirm before printing – When this option is selected and user gives the
print command, the print manager asks for confirmation before starting printing.
Print in B/W – When this option is selected, print manager prints in B/W even
if it is displayed in color on the screen.
vvv
Leo Palm 129
CHAPTER-IX
9. LeoQuery - Horary Tools
9.0 Introduction
In order to know your future prospects we have added some of the new methods
for getting predictions and answers to your queries in the current version of
LeoPalm. Those who have a firm belief in these aspects of Horary related science
could use a number of options other than the classical ways of predictions. For
Here, one need to be clear in his conscience first and should have firm belief in
God and faith in the upcoming prediction. You must be free from all the prejudices
and must remember the God while asking questions otherwise questions as
well as results may differ. You must be very specific in your mind while asking
questions. This is necessary in order to maintain the faith in these older but
much tried & tested methods.
These Horary tools are provided in a separate application with name ‘LeoQuery’.
User can also run the “LeoQuery” application from the “LeoPalm” application
by selecting the “LeoQuery” from the “Help” menu and similarly “LeoPalm”
application from the “LeoQuery”.
Every method has an “info” icon which gives the information of the query and
gives a brief description on how you can know answer of your question. You
can also see the mantra or Shloka in some of them, which you should enchant
when you go for the query. There are some methods which are specific to
questions such as “Santan” related Queries which you need to select only
when you have queries related to children. In some of them we have also provided
you with a set of questions from where you can select your query before posting
result. Here, we provide a brief review of all these methods one by one so that
you may become familiar with them before trying these options.
As discussed above, the first card tells the mental status of the person doing
query. The second card predicts for struggle required by the person. And the
last card predicts the result and is displayed when you click the button third
time. If the prediction text does not fit in the space provided for it, a scroll bar
appears at the right side of the text. User can scroll the text up/down by pressing
on the scroll bar. You have to click on the <Close> button when all the three
cards have been displayed on the screen. This will bring the program control to
the main screen where you can re-start another query or can click the <Close>
button again to close the Tarot Card program.
In “Chart Ramal” a North Indian chart is provided on the screen with Rasi numbers
from 1 to 12. Aries is in first house of the Chart and correspondingly other Rasi
are placed in other houses. Close your eyes, repeat your question in your mind
and click on one of these houses. The result of your query will be displayed on
the screen. Press <Close> button to close the program.
vvv
3. For preventing data loss from your Palm organizer, maintain battery
charging.
6. Do not install the software when other applications are running. Close
all applications and then install the software.
7. Prevent your Palm Organizer from direct sunlight and high tempera-
ture zone.
10. For latest updates stay tuned with our web site www.Leo Palm.com.
vvv
Solution: It means your Stylus co-ordinates are not properly set. To correct
this problem run the "Welcome" program in Palm Top and follow the onscreen
instructions.
Solution: To correct this error press the <Reset> button which appears on the
Palm Top screen. If it does not respond on pressing this <Reset> button then
press Palm Top Reset button (Which is at the backside of Palm Top).
Solution: It means your batteries are extremely low. Charge your PalmTop
battery or replace the batteries.
vvv