The Fumis Premium needs a power supply to operate. The power supply comes from the controller, through the cable connected into the RJ11 connector (see figure 2).
Note: Do not connect the Fumis Premium to an external micro USB power supply (for example telephone chargers).
5. Getting started
5.1. Removing the transparent protective film
It is recommended that you remove the protective film before using the Fumis Premium user interface to guarantee the best performance of the sensitive (touch) surface.
5.2. Connecting the heating device to the power
supply Connect the heating device to the power supply (follow the instructions on your heating device).
5.3. Setting the language
Set the desired language (for details see chapter 6.21.).
5.4. Setting the date and time
Set the correct date and time on the Fumis Premium (for details see chapter 6.3.).
5.5. Setting the temperature unit
Set the temperature unit (°C or °F) you want to be appear on the Fumis Premium (for details see chapter 6.14.).
www.ATech.si FUMIS_Premium user interface_UG_EN_V1-0_013 12