Beruflich Dokumente
Kultur Dokumente
Engineered
Control
Valves
for critical service
Fetterolf sales@schuf.com +49 6198 571110; +1 843 881 3345; +353 21 4837000 SchuF
SchuF www.schuf.com Engineered Control Valves
For over 60 years, SchuF’s control valves Features
have performed in the most arduous tasks The trim is single or multi-stage, with flow to
in the Chemical, Petrochemical, Refining, open or close. On/off, hollow piston and cage
Mining and Power industries. The valves are trim are also available.
available with angle and in-line bodies.
SchuF also offers a wide selection of
speciality control valves ranging from
multistage angle to multiport diverter
valves. They include high pressure, high
temperature let down valves, boiler feed SchuF’s strengths include flexibility of design
and start up valves, disc and piston (ram) and construction. We have produced control
drain valves with contoured discs and rams, valves in all stainless steels, high Nickel
distributor control valves and bellows alloys, Titanium and Zirkonium as well as
sealed valves. PTFE and glass linings. SchuF uses special
surface coatings and multiple spindle guiding
Unrivalled experience - 3 phase slurries. to improve the resistance against vibrations
Our designs reduce or eliminate flashing in and erosion. SchuF also offers solid Tungsten
the valve before the seat, thus improving Carbide and Ceramic trims.
the life of body and trim. The disc opening
design opens into the downstream vessel,
ensuring that flashing takes place in an
„infinite“ pipe preventing choking and
reducing fluid speed. Over the past 20 years
SchuF has perfected it’s proprietary Cv
calculation programme, which is unique in
it’s abilitiy to handle 3 phase flow as well as
high viscosity, non Newtonian fluids.
100
80
Most control valves come equipped with
60
pneumatic diaphragm actuators (available in
a fire-safe version) and piston actuators,
40
while hydraulic and electric actuators are
utilised for high pressures and specific
20
control regimes.
0
0 10 20 30 40 50 60
CFD simulation
Extensive experience
Patented Innovation exists allowing
SchuF’s patented x 3 bell curve as an detailed modelling to
alternative to linear, equal % or on /off optimise body design.
characteristics, offers better controllability
around operating conditions.
Industries served
Our valves are used as let down, level and
flow control, three way mixing and
distributive control for PTA, Polymers (PET
& PBT, PU PVC etc), Coal and Heavy oil Detailed Information
upgrading, gasification and liquefaction, salt Our main models are shown in special
& brine, Urea, metal slurries, steam handling product fliers.
and many more.
Fetterolf sales@schuf.com +49 6198 571110; +1 843 881 3345; +353 21 4837000 SchuF
SchuF www.schuf.com Engineered Control Valves
Severe Service Let Down Applications:
Pressure and Level Control, 74BS
Originally designed for PTA 3 phase slurry service these
valves open into the downstream vessel to eliminate
choking and cavitation. The accelerating body design
prevents „in body“ flashing, the single piece disc and
spindle with spindle protector stops metal fatigue and
spindle bending. The valves are used in multi-stage
reactor or crystalliser arrangements to control the level
or pressure in the upstream unit. Optinal
electrohydraulic actuators (below) eliminate sticking
and hunting.
Fetterolf sales@schuf.com +49 6198 571110; +1 843 881 3345; +353 21 4837000 SchuF
SchuF www.schuf.com Engineered Control Valves
Engineered Control Valve Applications:
Fetterolf sales@schuf.com +49 6198 571110; +1 843 881 3345; +353 21 4837000 SchuF
SchuF www.schuf.com Engineered Control Valves
Steam and related Applications:
Fetterolf sales@schuf.com +49 6198 571110; +1 843 881 3345; +353 21 4837000 SchuF
SchuF www.schuf.com Engineered Control Valves
Monomer & Polymer Control Valve Applications:
Monomer Feed Valve
Disc control valves are used to regulate
the level in PVC reactors. For PET, PBT
etc, control valves are used to regulate
the flow into the esterification and
polymerisation reactors. For vacuum
service, bellows are generally used. As
they are susceptible to failure in a
crystallising and polymerising
environment, SchuF recommends
external bellows. In these applications,
weld-lip gaskets can further enhance the
vacuum safety of the system.
Fetterolf sales@schuf.com +49 6198 571110; +1 843 881 3345; +353 21 4837000 SchuF
SchuF www.schuf.com Engineered Control Valves
General Specifications:
Available valves Valve sizes
1
Angle, line, wafer, T-piece, multiport /2“ to 36“ (DIN 15 to 900mm)
Inlet/oulet angles of 180, 90, 60 or 45°
Rating
Flow Coefficients Class 150 to 2500# ASME, DIN or JIS
single stage 1 to 5000 Butt weld ends
multi-stage 1 to 350, cage 1 to 300 Flanged ends in RF, RTJ, LR or LM/LF style
Hub and clamps from Grayloc or Securamax
Flow Characteristic
Linear, Equal percentage, x3 or bell curve Inlet temperatures and pressures
Consistent with applicable rating according to
Flow Direction ASME B16.34
Flow to open or close
Materials
Positioner Selection Body
As per customer specification. WCB, WC6, WC9, Cr-Mo Steel
E.g. Siemens PS2 Smart, SMC i/p positioner CF3, CF3M, CF8, CF8C, CF8M, CG8M
Duplex, Incoloy, Inconel, Hastelloy & Titanium
Actuator Selection Lining / Sleeves
PM multi-spring diaphragmm actuator in st.st., C.St. Glass, PTFE
or Aluminium casing Colmonoy, Stelliting, Chroming
PD double acting cylinder actuator in steel casing Tungsten Carbide, TiN, Canadising
PE single acting cylinder actuator in steel casing Trim
EM electric actuator 420, 316, 316L, 321 st.st.
HY hydraulic actuator SAF 2205, Inconel, Titanium
EH electro-hydraulic Stellite, Tungsten Carbide, Ceramics
KU bevel gear Jacketing
LM pneumatic motor Full or partial, C.St., st.st. or Titanium
Fetterolf sales@schuf.com +49 6198 571110; +1 843 881 3345; +353 21 4837000 SchuF
SchuF FETTEROLF Worldwide
Fetterolf SchuF do Brasil Ltda SchuF Specialty Valves India Pvt. Ltd.
Brazil India
fbvendas@fetterolf.com.br sales@schuf-india.com