Beruflich Dokumente
Kultur Dokumente
QUESTION NO: 1
By default, how does the router handle changes to its operational configuration?
Answer: C
Explanation:
QUESTION NO: 2
You would like to configure your PC's IP address of 10.10.0.156 as an FTP host with a username
of user and a password of mypass. Which configuration command accomplishes this goal?
Answer: A
Explanation:
QUESTION NO: 3
Where should you install the spare line module in a redundancy group?
Answer: C
Explanation:
Given the following router output, which configuration file will the router use at its next reload?
A. config
B. clientqos.cnf
C. startup-config
D. running-configuration
Answer: D
Explanation:
QUESTION NO: 5
What does the SRP distribute to the line modules when a routing table changes?
A. updated RIB-Out
B. link-state information
C. an incremental update
D. the complete routing table
Answer: D
Explanation:
How are the slot groups arranged in the ERX 700 Series Edge Router?
Answer: B
Explanation:
QUESTION NO: 7
Which protocol is used to transfer files to on the ERX Edge Router? (Choose two.)
A. SCP
B. FTP
C. RCP
D. TFTP
Answer: B,D
Explanation:
QUESTION NO: 8
You would like to install an OC-48c line module in an ERX 1440 Edge Router. Which slots can
support this configuration?
Answer: C
Explanation:
QUESTION NO: 9
What are two ways that IP datagrams are passed from the ingress line module to the egress line
module? (Choose two.)
Answer: A,D
Explanation:
QUESTION NO: 10
Which service does the ERX Edge Router support with a virtual router?
A. voice over IP
B. wholesale services
C. IP quality of service
D. SNMP management
Answer: B
Explanation:
QUESTION NO: 11
Your ERX router is supporting 100 virtual routers. A specific line module supports IP interfaces in
5 virtual routers. How many routing tables are maintained on that module?
Answer: C
Explanation:
QUESTION NO: 12
A. virtual-router isp-1
B. virtual-router ISP-1
C. virtual-router VR isp-1
D. virtual-router VR ISP-1
Answer: A
Explanation:
QUESTION NO: 13
You would like to configure an ATM PVC with a virtual circuit identifier of 33 on virtual path 0. The
PVC should use an unspecified bit rate and be encapsulated in the AAL5SNAP format. Which
command accomplishes this goal?
Answer: B
Explanation:
QUESTION NO: 14
Which two forms of DSL connectivity provide the same bandwidth in both directions? (Choose
two.)
Answer: B,C
Explanation:
QUESTION NO: 15
Which protocol is used between the RAS and the authentication server in a narrowband network
environment?
A. RADIUS
B. PPP PAP
C. MS CHAP
D. PPP CHAP
Answer: A
Explanation:
QUESTION NO: 16
Which two B-RAS service offerings do not require user authentication? (Choose two.)
A. Routed 1483
B. Bridged 1483
C. PPP over ATM
D. PPP over Ethernet
Answer: A,B
Explanation:
QUESTION NO: 17
In a bridged 1483 network, which configuration command allows the ERX Edge Router to
advertise customer networks into the provider's IGP?
Answer: C
Explanation:
QUESTION NO: 18
Which two statements are correct concerning DHCP Internal Server in the E-series router?
(Choose two.)
Answer: A,C
Explanation:
QUESTION NO: 19
Answer: A
Explanation:
QUESTION NO: 20
A service provider is operating a Routed 1483 network where the ATM PVCs are treated as a
large subnet. What is a consequence of this configuration?
Answer: B
Explanation:
QUESTION NO: 21
How does the ERX Edge Router interact with an external DHCP server in a Bridged 1483
network?
Answer: D
Explanation:
QUESTION NO: 22
A Bridged 1483 service offering is grouping DSL users into a large subnet. What are three
characteristics of this configuration? (Choose three.)
A. It burns IP addresses.
B. It conserves IP addresses.
C. A group of PVCs is a subnet.
D. It provides a numbered IP address to the ERX.
E. It provides an IP unnumbered address to ERX.
Answer: B,C,E
Explanation:
QUESTION NO: 23
In a Routed 1483 network which method of routing is typically employed on the DSL router?
Answer: A
Explanation:
QUESTION NO: 24
How does the ERX Edge Router interact with subscriber IP addresses assigned by an external
DHCP server?
A. It monitors messages from the external server and updates the routing table as needed.
B. It maintains the leases for the DHCP server and reassigns addresses to new subscribers.
C. It sends keepalives to the subscriber and makes the address available when the subscriber
stops responding.
D. It sends keepalives to the subscriber and removes the host route when the subscriber stops
responding.
Answer: A
Explanation:
QUESTION NO: 25
Which two static routes are typically configured on your router when a Routed 1483 network is
grouping ATM PVCs into a large subnet? (Choose two.)
A. host route
B. default route
C. customer network
D. ISP's routing domain
Answer: A,C
Explanation:
QUESTION NO: 26
Which configuration command represents a static customer route in a Routed 1483 network?
Answer: D
Explanation:
QUESTION NO: 27
Answer: A
Explanation:
QUESTION NO: 28
When supporting multiple authentication domains, the domain map must be configured with which
two options? (Choose two.)
A. hostname
B. static route
C. virtual router
D. loopback reference
Answer: C,D
Explanation:
QUESTION NO: 29
Which configuration command controls the source IP address for packets sent to a RADIUS
server?
Answer: C
Explanation:
QUESTION NO: 30
What is a method by which an IP interface can be assigned to a virtual router in a PPP over ATM
environment?
A. profile
B. policy list
C. classifier ACL
D. LCP negotiation
Answer: A
Explanation:
QUESTION NO: 31
In a PPP over ATM environment, which two PPP authentication methods are supported by the
ERX Edge Router? (Choose two).
A. IKE
B. PAP
C. CHAP
D. MSCHAP
Answer: B,C
Explanation:
QUESTION NO: 32
When sending an LCP Configuration Request, what can the ERX Edge Router possibly negotiate?
Answer: B
Explanation:
QUESTION NO: 33
In a PPP over ATM service offering, which two methods are available for dynamically allocating an
IP address to the customer's device? (Choose two.)
A. DHCP
B. RADIUS server
C. local address pools
D. static IP assignment
Answer: B,C
Explanation:
QUESTION NO: 34
In a PPP over ATM service offering, which command inserts the user's host route into the routing
table?
A. ip host-route
B. ip access-routes
C. ip dynamic host-route
D. ip route access-routes
Answer: B
Explanation:
QUESTION NO: 35
Which configuration command allows the router to utilize a RADIUS server to authenticate
incoming Telnet users?
Answer: A
Explanation:
QUESTION NO: 36
The ERX Edge Router responds to a received PPP over Ethernet Active Discovery Initiation
(PADI) with which message type?
Answer: A
Explanation:
QUESTION NO: 37
Which process occurs first during the Ethernet Discovery Stage process for a PPPoE service
offering?
Answer: D
Explanation:
QUESTION NO: 38
You would like to associate a profile called ip-info with a PPPoE interface operating on
FastEthernet 3/1.200. Which set of configuration commands accomplishes this goal?
Answer: D
Explanation:
QUESTION NO: 39
In a DSL network, which device terminates the PPP over Ethernet subscriber's two-wire phone
line?
A. RAS
B. DSLAM
C. ATM switch
D. RADIUS server
Answer: B
Explanation:
QUESTION NO: 40
A user is connected on a DSL line and is using a PPP over Ethernet service. Which network
device strips the ATM header from the datagram and investigates the PPP header?
A. DSLAM
B. DSL modem
C. ERX Edge Router
D. customer workstation
Answer: C
Explanation:
Which configuration command dynamically detects and configures a Bridged 1483 interface?
A. auto-configure ip
B. auto-configure ppp
C. auto-configure pppoe
D. auto-configure bridgedethernet
Answer: D
Explanation:
QUESTION NO: 42
Which profile configuration command dynamically creates a host route in the routing table?
A. ip host routes
B. ip access-routes
C. host routes enabled
D. access-routes enabled
Answer: B
Explanation:
QUESTION NO: 43
With the CLI command profile atm1483 bulk-config-name test atm-pppoe, which three statements
describe its purpose and implementation? (Choose three.)
Answer: A,C,D
Explanation:
You are configuring a PPP over Ethernet service offering. Which two types of interfaces can be
dynamically created with a profile? (Choose two.)
A. IP
B. ATM
C. PPPoA
D. PPPoE
Answer: A,D
Explanation:
QUESTION NO: 45
Which profile configurations allows either PAP or CHAP to be used for authentication?
Answer: A
Explanation:
QUESTION NO: 46
A. profile
B. domain map
C. L2TP tunnel map
D. outgoing interface to the LNS
Answer: B
Explanation:
Which CLI command is used to examine whether an L2TP tunnel can be established for domain
isp1.com?
Answer: A
Explanation:
QUESTION NO: 48
Which two statements are true about L2TP tunnel switching? (Choose two.)
Answer: B,D
Explanation:
QUESTION NO: 49
Answer: D
Explanation:
QUESTION NO: 50
Answer: B
Explanation:
QUESTION NO: 51
You have 50 subscribers accessing a LAC to connect to ISP1.com. What is the L2TP Control
Connections and Sessions for the subscribers?
Answer: B
Explanation:
QUESTION NO: 52
A. profile
B. domain map
C. DHCP server
D. L2TP tunnel map
Answer: B
Explanation:
QUESTION NO: 53
A. profile
B. remote host
C. aaa domain-map
D. l2tp destination profile
Answer: A
Explanation:
QUESTION NO: 54
Which attribute uniquely identifies the L2TP connection between the router and the L2TP network
server?
A. Tunnel ID
B. Tunnel tag
C. Tunnel type
D. Tunnel medium
Answer: A
Explanation:
QUESTION NO: 55
When an LNS sends a Start Control Connection Reply to a LAC, which three parameters can be
conveyed? (Choose three.)
A. host name
B. Tunnel ID
C. IP address
D. DHCP reply
E. L2TP version
Answer: A,B,E
Explanation:
What is the maximum number of input policy lists that you can attach to an IP interface?
A. 1
B. 2
C. 128
D. 512
Answer: A
Explanation:
QUESTION NO: 57
Which color does the router assign to packets received at a data rate that is above the committed
rate but is below the peak rate?
A. red
B. white
C. green
D. yellow
Answer: D
Explanation:
QUESTION NO: 58
You have configured a Classifier Access Control List (CLACL) with multiple match clauses. Each
match clause has multiple defined fields within it. Which two statements describe how the router
evaluates this CLACL? (Choose two.)
Answer: A,D
Explanation:
The policy action of color is used for congestion control under which circumstance?
Answer: C
QUESTION NO: 60
Answer: C
Topic 2, Volume B
QUESTION NO: 61
Which type of cable is required to access the router's console port from a PC?
A. modem
B. Ethernet
C. null modem
D. straight-through
Answer: C
Explanation:
QUESTION NO: 62
When using a 40 Gbps switch fabric, how much full duplex bandwidth is available to each slot?
Answer: A
Explanation:
QUESTION NO: 63
What does the SRP distribute to the line modules when a routing table changes?
A. updated RIB-Out
B. link-state information
C. an incremental update
D. the complete routing table
Answer: D
Explanation:
QUESTION NO: 64
Which three CLI modes are available on the ERX Edge Router? (Choose three.)
A. User Exec
B. Privileged Exec
C. Super User Exec
D. Global Configuration
E. Private Configuration
Answer: A,B,D
Explanation:
QUESTION NO: 65
The primary line module has failed and the spare line module is now active. What occurs, by
default, when the primary line module returns to an operational status?
Answer: B
Explanation:
QUESTION NO: 66
A. on the SRP
B. on the I/O adapter
C. on the egress line module
D. on the ingress line module
Answer: D
Explanation:
QUESTION NO: 67
A. snmp-client
B. snmp-server
C. snmp-client enable
D. snmp-server enable
Answer: B
Explanation:
QUESTION NO: 68
Which CLI command copies a file called 4-0-0.rel from FTP server userpc to the router?
Answer: D
Explanation:
QUESTION NO: 69
Which ERX Edge Router component is responsible for all packet processing and packet
forwarding?
A. I/O adapter
B. line module
C. shared memory fabric
D. switch route processor
Answer: B
Explanation:
QUESTION NO: 70
You would like to configure your PC's IP address of 10.10.0.156 as an FTP host with a username
of user and a password of mypass. Which configuration command accomplishes this goal?
Answer: A
Explanation:
QUESTION NO: 71
Answer: B,C
Explanation:
QUESTION NO: 72
Beginning with software version 4-0-0.rel, how many virtual routers can be configured on the ERX
Edge Router?
A. 32
B. 128
C. 256
D. 1000
Answer: D
Explanation:
QUESTION NO: 73
Your ERX router is supporting 100 virtual routers. A specific line module supports IP interfaces in
5 virtual routers. How many routing tables are maintained on that module?
A. 0
B. 1
C. 5
D. 100
Answer: C
Explanation:
QUESTION NO: 74
Which two factors affect the speed of your DSL connection? (Choose two.)
Answer: A,B
Explanation:
QUESTION NO: 75
A. 28.8 kbps
B. 56 kbps
C. 128 kbps
D. 1544 kbps
Answer: B
Explanation:
QUESTION NO: 76
You would like to configure an ATM PVC with a virtual circuit identifier of 33 on virtual path 0. The
PVC should use an unspecified bit rate and be encapsulated in the AAL5SNAP format. Which
command accomplishes this goal?
Answer: B
Explanation:
QUESTION NO: 77
Which two B-RAS service offerings maintain the analog dial-up model with centralized user
authentication, authorization, and accounting? (Choose two.)
Answer: C,D
Explanation:
QUESTION NO: 78
How does the ERX Edge Router interact with subscriber IP addresses assigned by an external
DHCP server?
A. It monitors messages from the external server and updates the routing table as needed.
B. It maintains the leases for the DHCP server and reassigns addresses to new subscribers.
C. It sends keepalives to the subscriber and makes the address available when the subscriber
stops responding.
D. It sends keepalives to the subscriber and removes the host route when the subscriber stops
responding.
Answer: A
Explanation:
QUESTION NO: 79
Which configuration command allows the ERX Edge Router to advertise customer networks into
the provider's IGP?
A. redistribute direct
B. redistribute static
C. redistribute connected
D. redistribute access-internal
Answer: B
Explanation:
QUESTION NO: 80
A Bridged 1483 service offering is grouping DSL users into a large subnet. What are three
A. It burns IP addresses.
B. It conserves IP addresses.
C. A group of PVCs is a subnet.
D. It provides a numbered IP address to the ERX.
E. It provides an IP unnumbered address to ERX.
Answer: B,C,E
Explanation:
QUESTION NO: 81
A Bridged 1483 network is grouping DSL users into a single subnet. Where must the CPE
workstation's default gateway point?
Answer: D
Explanation:
QUESTION NO: 82
A service provider is assigning a /30 subnet to each ATM PVC in a Routed 1483 environment.
What is a consequence of this configuration?
A. It burns up IP addresses.
B. It conserves IP addresses.
C. It results in a smaller routing table.
D. The group of PVCs is treated as a large LAN.
Answer: A
Explanation:
QUESTION NO: 83
Answer: D
Explanation:
QUESTION NO: 84
You are configuring an ATM PVC to support a Bridged 1483 network. What should be applied to
the atm pvc command to accomplish this goal?
A. aal5mux
B. aal5snap
C. aal5route
D. aal5bridge
Answer: B
Explanation:
QUESTION NO: 85
In a Bridged 1483 network, which set of configuration commands allows the router to forward
requests from the PC to an external DHCP server at 1.1.1.1?
Answer: B
Explanation:
QUESTION NO: 86
Your Routed 1483 network is grouping ATM PVCs into a large subnet and has static host routes
configured. For which purpose does the static route to the customer router provide?
Answer: A
Explanation:
QUESTION NO: 87
A. ip local-pool
B. ip local pool
C. ip dhcp local pool
D. ip dhcp-local pool
Answer: D
Explanation:
QUESTION NO: 88
When configuring PPP over ATM interfaces, what does the profile utility accomplish?
Answer: B
Explanation:
When configuring PPP over ATM, what configuration command determines which virtual router's
RADIUS server will authenticate a client's login?
Answer: C
Explanation:
QUESTION NO: 90
When sending an LCP Configuration Request, what can the ERX Edge Router possibly negotiate?
A. IP address
B. authentication
C. WINS assignment
D. Domain Name Server
Answer: B
Explanation:
QUESTION NO: 91
Which software process sorts client login requests and assigns them to a virtual router for RADIUS
service?
A. PPP
B. AAA
C. LCP
D. NCP
Answer: B
Explanation:
Answer: A
Explanation:
QUESTION NO: 93
Which configuration command allows the router to utilize a RADIUS server to authenticate
incoming Telnet users?
A. aaa new-model
B. aaa telnet login
C. telnet authentication login
D. authentication telnet login
Answer: A
Explanation:
QUESTION NO: 94
In a PPP over ATM service offering, what is a valid method for assigning an address to the ERX
Edge Router?
Answer: D
Explanation:
What is a method by which an IP interface can be assigned to a virtual router in a PPP over ATM
environment?
A. policy list
B. RADIUS VSA
C. classifier ACL
D. LCP negotiation
Answer: B
Explanation:
QUESTION NO: 96
What are the two well-known UDP ports used by RADIUS accounting servers? (Choose two.)
A. 1645
B. 1646
C. 1812
D. 1813
Answer: B,D
Explanation:
QUESTION NO: 97
In a DSL network providing PPP over Ethernet service, which device provides the client's IP
address?
A. DSLAM
B. ATM switch
C. Ethernet switch
D. Broadband RAS
Answer: D
Explanation:
A user is connected on a DSL line and is using a PPP over Ethernet service. Which network
device encapsulates the datagram inside of an ATM header?
A. DSLAM
B. DSL modem
C. ERX Edge Router
D. customer workstation
Answer: B
Explanation:
QUESTION NO: 99
Which process occurs first during the Ethernet Discovery Stage process for a PPPoE service
offering?
Answer: D
Explanation:
The ERX Edge Router is configured for PPP over Ethernet without using VLAN tagging. How
many PPP over Ethernet major interfaces can be configured per port?
A. 1
B. 100
C. 2048
D. 4096
Answer: A
Explanation:
What are the two stages of PPP over Ethernet? (Choose two.)
Answer: A,C
Explanation:
Which set of commands allows PPPoE dynamic interfaces to use a profile called config-info?
A. profile config-info
auto-configure ppp
B. profile config-info
auto-configure any
C. profile ppp config-info
auto-configure pppoe
D. profile pppoe config-info
auto-configure pppoe
Answer: D
Explanation:
Which profile configurations allows either PAP or CHAP to be used for authentication?
Answer: A
Answer: C
Explanation:
With the command atm bulk-config test vc-range 1 3 200 400, what is the correct interpretation of
the numeric values following the vc-range?
Answer: B
Explanation:
A. auto-configure ip
B. auto-configure ppp
C. auto-configure pppoe
D. auto-configure bridgedethernet
Answer: B
Explanation:
Answer: C
Explanation:
Answer: D
Explanation:
Which sequence of messages demonstrates the communications between the LAC and LNS
when they establish an L2TP session?
Answer: C
Explanation:
A. show subscriber
B. show l2tp tunnel
C. show l2tp session
D. show tunnel session
Answer: C
Explanation:
Answer: D
Explanation:
Which L2TP protocol packet is sent by the LAC to establish the control connection (tunnel)?
Answer: B
Explanation:
Which two statements are true about L2TP tunnel switching? (Choose two.)
Answer: B,D
Explanation:
Within the L2TP LNS configuration of the router, where is the PPP authentication method
specified?
A. profile
B. remote host
C. aaa domain-map
D. l2tp destination profile
Answer: A
Explanation:
A. profile
B. RADIUS
C. DHCP server
D. L2TP tunnel map
Answer: B
Explanation:
Answer: D
Explanation:
Which function enforces logical data throughput rates that are below the actual physical line rate of
a port?
A. rate limiting
B. data policing
C. classification
D. bandwidth limiting
Answer: A
Explanation:
The ERX Edge Router can utilize which two classifiers? (Choose two.)
A. multi field
B. policy classifier
C. quality of service
D. behavior aggregate
Answer: A,D
Explanation:
A. 1
B. 2
C. 128
D. 512
Answer: A
Explanation:
You are experiencing contention in the queue on an egress interface of the router. Which policy
action should be used for congestion control?
A. mark
B. color
C. filter
D. discard
Answer: B
Explanation: