Beruflich Dokumente
Kultur Dokumente
One of the error analysis we encounter are human errors and the light passing through the
window, in this experiment the place should be completely dark, unfortunately our group is near
to the window. For example, while we are tracing the slits in the paper we can’t get an accurate
drawing because it’s hard to see the slits, because of that there’s a chance when we are
Analysis
On the first part of the experiment, the results are when there is an increase in the slit
screen distance the wavelength decreases. Another observation is that at constant slit screen
separation when the slit width increases also the wavelength. For the second part of the
experiment is same with the first part but we used the double slit disk.
The results are consistent with the theory, using the single slit disk which results to a
destructive interface, which results to decrease in amplitude and formation of dark fringe. For the
double slit disk, it results to a constructive interference which increase in amplitude and
Diffraction is the slight bending of light as it passes around the edge of an object. The
amount of bending depends on the relative size of the wavelength of light to the size of the
opening. If the opening is much larger than the light's wavelength, the bending will be almost
unnoticeable. Interference the process in which two or more light, sound, or electromagnetic
waves of the same frequency combine to reinforce or cancel each other, the amplitude of the
resulting wave being equal to the sum of the amplitudes of the combining waves.
I therefore conclude that the single and double slit contrast on the relationship with the
interference but the relationship regarding slit width, wave length and slit-screen separation are
all the same. Diffraction depends only on the ratio of wave length to the size of the diffracting
object.
To accomplish the right data, we can minimize our error and mistakes by setting up the
apparatus properly and use them carefully. Therefore, we must know how to illustrate the data
In real life application, measuring the flatness or curvature of optics, and wavelengths of
infrared radiation (or visible) are analytical apps of interference. Diffraction is widely used for
generators, pulse compression gratings, Bragg fiber optics, angle tuning filters). There is day to
day apps, just can’t think of them now. Interference filters, anti-reflection filters, or dichroic
optics are in every optical system, bar code scanners, video projectors, cameras, telescopes,
binoculars, eyeglasses. Constructing concert halls, so that destructive interference does not result
in areas in the hall where the sounds produced on stage cannot be heard.