Robie, R.A., Russell-Robinson, S. & Hemingway, B.S.
(1989) Heat capacities and entropies
from 8 to 1000 K of langbeinite (K 2Mg2(SO4)3), anhydrite (CaSO 4) and of gypsum (CaSO4.2H2O) to 325 K. Thermochim. Acta 139, 67-81. Abart, R., Connolly, J.A.D. & Trommsdorff, V. (1992) Singular point analysis: construction of Schreinemakers projections for systems with a binary solution. Am. J. Sci. 292, 778-805. Abstract. Calorimetric dets. were made of specimens of scapolite from the Gorno- Badakhshansk region, Tadzhik SSR. The scapolite was chem. analyzed. The Cp of marialite was det. at 12-300 K using a vacuum adiabatic calorimeter. The DH and heat of dissoln. (in a melt of 2PbO.B 2O3) were also measured at <973 K, using a Tian-Calvet calorimeter. The values were C°298.15 318.0 cal/(mol), S° 298.15 337.0 cal/mol K, H°f, 298.15 -5852.2 kcal/mol, and C°p (239.09-264.7)/103.T. Afifi, A., Kelly, W. C. and Essene, E. J. (1988) The stability and phase relations of tellurides. Part I. Thermochemical data and calculated equilibria. Econ. Geol. 83, 377-394. (tellurides) Anderson, G. M. (1996) Thermodynamics of Natural Systems. Wiley, 382 p. (Sci., QE515.A61) (aqueous systems) Barin, I. (1995) Thermochemical Data of Pure Substances. 3rd ed., 2 vol., Weinheim, p. (Science Lib., QD 511.8 .B26 1995) (simple phases, limited value) Barton, P. B. and Skinner, B. J. (1979) Sulfide mineral stabilities. In Geochemistry of Hydrothermal Ore Deposits, 2nd ed., Barnes, H. L., ed., Wiley, 278-403. (Sci., QE390.B371) (sulfides) Berman, R. G. (1988) Internally consistent thermodynamic data set for minerals in the system Na2O-K2O-CaO-MgO-FeO-Fe2O3-Al2O3-SiO2-TiO 2-H2O-CO2. J. Petrol. 29, 445-522. (accompanying computer program for thermodynamic calculations) Berman, R. G. (1991) Thermobarometry using multi-equilibrium calculations: a new technique with petrological applications. Can. Mineral. 29, 833-855. (application of simultaneous equilibria using TWEEQU computer program) Birch, F. (1966) Compressibility; elastic constants. In Clark, D. P. Jr. (ed.) Handbook of physical constants. Geol. Soc. Amer. Mem. 97, 97-174. (outdated) Bowers TS, Jackson KJ, Helgeson HC. 1984. Equilibrium activity diagrams for coexisting minerals and aqueous solutions at pressures and temperatures to 5 kb and 600°C. Springer- Verlag, 397 p. Broecker, W. S. and Oversby, V. M. (1971) Chemical Equilibria in the Earth. McGraw-Hill, 318 p. (Sci., QE515.B67) (incl. thermodynamics of trace element partitioning) Callanan, J.E., Weir, R.D. & Westrum, E.F. (1993) Thermodynamic properties of silicides. II. Heat-capacity at temperatures-t from 5.9 K To 341K and derived thermodynamic properties to T = 1200 K of tungsten disilicide: WSi 2.06. J. Chem. Thermodyn. 25, 1391-1401. [S°298 68.43±0.17 J/mK; ΔfG° 298 = -79.5±5.5 kJ·mol] Chase, M. W., Davies, C. A., Downey, J. R. Jr, Frurip, D. J., McDonald, R. A. and Syverud, A. N. (1985) JANAF thermochemical tables (3rd ed.). J. Phys. Chem. Ref. Data 14, Suppl. 1, 2 Vol., 1857 p. () (great source for fluids up to 5000 K, simple compounds) Chase, M.W. (1998) NIST-JANAF Thermochemical Tables, 4 th ed. American Chemical Society, American Institute of Physics for the National Institute of Standards and Technology, Woodbury, N.Y., 2 v., 1951 p Chatterjee, N. D. (1990) Applied Mineralogical Thermodynamics. Springer-Verlag, 321 p. (Sci., QE364.2.T45 C491). (more advanced thermodynamic calculations) Cheynet, B. (1989) Thermodynamic Properties of Inorganic Materials. "A literature database covering the period 1970-GS , (Sci., Z7144 .T41). (refs) Connolly, J.A..D. & Cesare, B. (1993) C-O-H-S fluid composition and oxygen fugacity in graphitic metapelites. J. Metam. Geol. 11, 368-378. Connolly, J.A..D. & Kerrick, D.M. (1987) An algorithm and computer program for calculating composition phase diagrams. CALPHAD 11, 1-55. Connolly, J.A..D. & Kerrick, D.M. (2002) Metamorphic controls on seismic velocity of subducted oceanic crust at 100-250 km depth. Earth Planet. Sci. Lett. 204, 61-74 Connolly, J.A..D. & Petrini, K. (2002) An automated strategy for calculation of phase diagram sections and retrieval of rock properties as a function of physical conditions. J. Metam. Geol. 20, 697-708. Connolly, J.A..D. & Trommsdorff V (1991) Petrogenetic grids for metacarbonate rocks: pressure- temperature phase diagrams for mixed volatile systems. Contr. Mineral. Petrol. 108, 93-105. Connolly, J.A..D. (1990) Multivariable phase diagrams: an algorithm based on generalized thermodynamics. Am. J. Sci. 290, 666-718. Connolly, J.A..D. (1995) Phase diagram methods for graphitic rocks and application to the system C-O-H-FeO-TiO2-SiO2. Contr. Mineral. Petrol. 119, 94-116. Connolly, J.A..D. (2005) Computation of phase equilibria by linear programming: a tool for geodynamic modeling and its application to subduction zone decarbonation. Earth Planet. Sci. Lett., in press. DATA SOURCES AND PROGRAMS FOR THERMODYNAMICS AND PHASE EQUILIBRIA Ehlers, E. G. (1972) Interpretation of Geological Phase Diagrams. Freeman, 280 p. (Sci, UGLI, QE364.E33). (manipulation of phase diagrams) Ernst, W. G. (1976) Petrologic Phase Equilibria. Freeman, 333 p. (Sci. QE431.5.E72). (elementary text, easy to read) Fechter, S. & Oppermann, H. (1992) Thermodynamical investigations to the system Mn/Mo/O. Z. Anorg. Allg. Chem. 615, 54-60. Findlay, A. (1951) The Phase Rule and Its Applications . 9th ed., Dover, 494 p. (Sci., Eng., QD501.F479) (topology of phase diagrams) Ganguly, J. and Saxena, S. K. (1987) Mixtures and Mineral Reactions. Springer-Verlag, 291 p. (Sci., QE 351 .M69B) (emphasis on mineral solid solutions and solvi) Glate, F., Sukhushina, I.S. & Vasil'eva, I.A. (1989) Thermodynamic properties of manganese molybdate (Mn 2Mo3O8 and MnMoO 4). Zh. Fiz. Khim. 63, 3105-3108. Greenwood, H. J., ed. (1977) Short Course in Application of Thermodynamics to Petrology and Ore Deposits. Mineral. Assoc. Can., 230 p. (Sci., QE431.6.T45.A64) (good coverage, level uneven) Helgeson, H. C., Delaney, J. M., Nesbitt, H. W. and Bird, D. K. (1978) Summary and critique of the thermodynamic properties of rock-forming minerals. Am. J. Sci. 278A, 229 p. (outdated, contains serious systematic errors) Holland TJB, Powell R (1998) An internally consistent thermodynamic data set for phases of petrological interest. J Metam Geol 16:309-343. Holland, T.J.B. & Powell, R. (1990) An enlarged and updated internally consistent thermodynamic data set with uncertainties and correlations: the system K 2O-Na2O-CaO- MgO-FeO-Fe2O3-Al2O3-TiO 2-SiO 2-C-H2-O2. J. Metam. Geol. 8, 89-124. (paper on Thermocalc, program for thermodynamic calculations) Holland, T.J.B. & Powell, R. (1998) An internally consistent thermodynamic data set for phases of petrological interest. J. Metam. Geol. 16:309-343. Hultgren R. R. (1973) Selected Values of the Thermodynamic Properties of Binary Alloys. Amer. Soc. Metals, 1435 p. (Media Union, QD171.S441) (binary metal systems) Kern, R. and Weisbrod, A. (1964) Thermodynamics for Geologists. Freeman, 304 p. (Buhr, QC311.K392) (first book on geothermodynamics, calculations inconsistent with available experiments) Knacke, O., Kubaschewski, O. and Hesselmann, K. (1991) Thermochemical Properties of Inorganic Substances. Springer-Verlag. 2nd ed., 2 vol., 2412 p. (Sci., QD511.8.B25) (less reliable, contains data on more compounds; unusual standard states) Kubaschewski, O., Alcock, C. B., and Spencer, P. J. (1993) Materials Thermochemistry (6th ed.). Pergamon, 363 p. (Sci., Eng., QD511.K95) (mainly oxide data) Kubaschewski, P., Alcock, C. B. and Spencer, P. J. (1993) Materials Thermochemistry. 6th ed., Pergamon, 363 p. (Sci., Eng., QD511.K95). (good discussions) Levin, E. M. and McMurdie, H. F. (1975) Phase Diagrams for Ceramists, 1975 Supplement. Amer. Ceram. Soc., 513 p. (Sci., QD501.P53) (great source, incomplete) Levin, E. M., Robbins, C. R. and McMurdie, H. F. (1964) Phase Diagrams for Ceramists. Amer. Ceram. Soc., 601 p. (Sci., QD501.P53) (great source, incomplete coverage) Levin, E. M., Robbins, C. R. and McMurdie, H. F. (1969) Phase Diagrams for Ceramists, 1969 Supplement. Amer. Ceram. Soc., 625 p. (Sci., QD501.P53) (incomplete) Lewis, G. N. and Randall, M. (1961) Thermodynamics. 2nd ed. by Pitzer, K. S. and Brewer, L., McGraw-Hill, 723 p. (Eng., Sci., QC311.L674TH). (still a valuable text) Liu, L.-G. and Bassett, W. A. (1986) Elements, Oxides and Silicates. High-Pressure Phases with Implications for the Earth's Interior. Oxford Univ. Press, p. (Sci., QE371.L581) (summary of high pressure phase equilibria, with emphasis on oxides and silicates) Malanowski, S. C. (1992) Modelling Phase Equilibria: Thermodynamic Background and Practical Tools. Wiley, 311 p. (Sci., QD503.M351). (emphasis on organics) Mills, K. C. (1974) Thermodynamic Data for Inorganic Sulfides, Selenides and Tellurides. Butterworths, London, 845 p. (Sci., QD181.S1.M66) (CP, HT,S298 of sulfides; updates: Barton & Skinner1989, Afifi et al. 1988, Simon & Essene 1996) O’Hare P.A.G., Hubbard W.N. & Johnson G.K. (1984) Calorimetric measurements of the low- temperature heat-capacity, standard molar enthalpy of formation at 298.15 K, and high- temperature molar enthalpy increments relative to 298.15 K of tungsten disulfide (WS 2), and the thermodynamic properties to 1500.K. J. Chem. Thermodyn. 16, 45-59. O’Hare, P.A.G. & Hope, G.A. (1992) thermodynamic properties of tungsten ditelluride (WTe 2). II. Standard molar enthalpy of formation at the temperature 298.15 K. J. Chem. Thermodyn. 24, 639-647. O’Hare, P.A.G. & Johnson, G.K. (1986) Thermochemistry of inorganic sulfur compounds. VII. Standard molar enthalpy of formation at 298.15 K, high-temperature enthalpy increments, and other thermodynamic properties to 1100 K of titanium disulfide, TiS 2. J. Chem. Thermodyn. 18, 189-199. O’Hare, P.A.G., Lewis, B.M. & Parkinson, A. (1988) Standard molar enthalpy of formation by fluorine-combustion calorimetry of tungsten diselenide (WSe 2). Thermodynamics of the high-temperature vaporization of WSe 2 - revised value of the standard molar enthalpy of formation of molybdenite (MoS 2). J. Chem. Thermodyn. 20, 681-691. Pankratz, L.B. (1982) Thermodynamic properties of elements and oxides. U.S. Bur. Mines Bull. 672, 509 p. Pankratz, L.B. (1984) Thermodynamic properties of halides. U.S. Bur. Mines Bull. 674, 826 p. Pankratz, L.B., Mah, A.D. & Watson, S.W. (1987) Thermodynamic properties of sulfides. U. S. Bur. Mines Bull. 689, 427 p. Pawley, A.R., Redfern S.A.T. & Holland T.J.B. (1996) Volume behavior of hydrous minerals at high pressure and temperature: I. Thermal expansion of lawsonite, zoisite, clinozoisite and diaspore. Am Mineral 81:335-340 Ricci, J.E. (1966) The Phase Rule and Heterogeneous Equilibrium. Dover, 505 p. (Sci, Eng., QD501.R49). (standard reference) Robie, R.A. & Hemingway, B.S. 1995. Thermodynamic properties of minerals and related substances at 298.15 K and 1 bar (105 Pascals) pressure and at higher temperatures. US Geol Surv Bull 2131, 461 p. Robie, R.A., Hemingway, B.S. & Fisher J.R. (1978) Thermodynamic properties of minerals and related substances at 298.15 K and 1 bar (10 5 Pascals) pressure and at higher temperatures. U.S. Geol. Surv. Bull. 1452. Robie, R.A. & Hemingway, B.S. (1995) Thermodynamic properties of minerals and related substances at 298.15 K and 1 bar (10 5 Pascals) pressure and at higher temperatures. U.S. Geol. Surv. Bull. 2131, 461 p. "A summary of the thermodynamic data for minerals at 298.15 K with calculated values for the functions C P, f HT, f GT,ST, ... to 1800 K." (Grad.) (most important reference for geothermodynamic properties ) Roth et al., Phase Equilibria (sic) Diagrams for Ceramists. Am. Ceram. Soc., Index for Vols. I - XI. Roth et al., Phase Equilibria (sic) Diagrams for Ceramists. Am. Ceram. Soc., Vols. VI - XI. Roth, R.S., Clevinger, M.A. & McKenna, D. (1984) Phase Diagrams for Ceramists, Cumulative Index for Volumes I-V. Amer. Ceram. Soc., 92 p. (Sci., QD50 .P53) Roth, R.S., Negas, T. & Cook, L.P. (1981) Phase Diagrams for Ceramists, Vol. IV. Am. Ceram. Soc., 330 p. (Sci., QD501.P53) (great source, incomplete) Roth, R.S., Negas, T. & Cook, L.P. (1983) Phase Diagrams for Ceramists, Vol. V. Am. Ceram. Soc., 395 p. (Sci., QD501.P53) (great source, incomplete ) Saxena, S.K., ed. (1992) Thermodynamic data: systematics and estimation. Adv. Phys. Geochem., Vol. 10, Springer-Verlag, 367 p. (Sci., QE515.A245) Saxena, S.K. & Shen, G. (1992) Assessed data on heat capacity, thermal expansion, and compressibility for some oxides and silicates. J. Geophys. Res. 97, 19813-825. (V update) Saxena, S.K., Chatterjee, N., Fei, Y. & Shen, G. (1993) Thermodynamic Data on Oxides and Silicates. Springer-Verlag, 428 p. "A ... data set based on thermochemistry and high P phase equilibrium (sic)." (Sci., QD181.O1 T44) (fewer phases, data to high P-T) Semenov, Yu.V., Sidorov, Yu.I., Kiseleva, I.A., Topor, N.D. & Khodakovskii, I.L. (1981) Thermodynamic properties of marialite. Geokhimiya (2), 242-248. Simon, G. & Essene, E.J. (1996) Phase relations among selenides, sulfides, tellurides and oxides. I. Thermodynamic data and calculated equilibria. Econ. Geol., in submission. Skinner, B.J. (1966) Thermal expansion. In Clark, D. P. Jr. (ed.) Handbook of physical constants. Geol. Soc. Amer. Mem. 97, 75-97. (now outdated) Sukhushina, I.S. & Vasileva, I.A. (1990) Thermodynamical properties of molybdenite. Geokhimiya (7), 1063-1068. [DGf0(MoS2) = -362.85 158.49 10-3 T [1.6 + 15 10-6 (T - 1313)2]1/2 kJ over the T interval 1100-1370 K for hex MoS2.] Wagman, D. D., Evans, W. H., Parker, V. B., Schumm, R. H., Halow, I., Bailey, S. M., Churney, K. L. and Nuttall, R. L. (1982) The NBS tables of chemical thermodynamic properties. J. Phys. Chem. Ref. Data 11, 3rd ed., Suppl 2, 392 p. (widely cited, outdated, undocumented) Wood, B. J. and Fraser, D. G. (1976) Elementary Thermodynamics for Geologists (reprinted in 1978 with corrections). Oxford Univ. Press, 303 p. (Sci., QE509.W661). (elementary text, easy to read, out of print)