Beruflich Dokumente
Kultur Dokumente
3. List down the various items that constitute the overhead expenses. CO3 K1
PART-B (2 x 13=26)
6. (a) i) Discuss various methods of calculating depreciation (6) CO3 K2
ii) Discuss various allowance to be considered while making cost estimation.(7) CO3 K2
(OR)
(b) The catalogue price of a certain machine is₹1, 05,000the discount allowed to the
distribution being 20% data collected at a certain period show that the selling cost and
factory cost are equal and that the relation among materials cost, labour cost and on cost in CO3 K4
the factory are 1:3:2 if the labour cost ₹20,000 what profit is being made on the machine
(13)
7. (a) Find the cost of material for the machine part shown in fig Density of material may be taken
as 8.2 gm/cu-cm. The cost of the material is Rs.30 per kg. Assume 20% wastage of material
of the finished component and 6 holes for bolt.(13) CO3 K4
(OR)
(b) Find the sales price of component made from solid steel bar 6cm long and 2cm in dia. The
machining operation requires 11/4 hour .Assume the following data.
a) Cost of mild steel in ₹100 per kg.
b) Density of mild steel 8gm/cc CO3 K4
c) Labour charges ₹40 per hour.
d) Overhead changes are 100% of the direct labor cost.
e) Profit as 20% of the total cost. :
PART-C (1 x 14=14)
8. (a) Illustrate the documents / information that are required for process planning. (14) CO2 K2
(OR)
(b) Describe the objectives, stages and methods of inspection in the context of Quality CO2 K2
assurance method. (14)