Beruflich Dokumente
Kultur Dokumente
com
OPERATION
1. DISPLAY
2. Keyboard Operation
1
http://www.silverinstruments.com
Modification Operation: when move “→”key, the corresponding number will flash, then you
can change by “↑”.
First Display: Normal display, no unit display, M3 or L unit is decided by function options.
The first line shows instaneous flow, the decimal points are floating.
The first line shows Totalized flow,the decimal point is fixed two decimal places.
Battery indication is shown in the right side.
2
http://www.silverinstruments.com
When the password is correct, press “Ent”and the correct prompt is “0000”.
When re-confirm, ① enter into “Fourth display”, starting to browse and modify the settings.
②③ exit to normal display, ④ enter into “Fourth Display”, start to scroll but without any
setting. Press“Esc”to exit.
3
http://www.silverinstruments.com
3: when entering L factor, it will display M3 flow. (This option is for large M3 factor, but the
requirement is to display M3 flow. To choose with “↑”, the flow will show the real time
exchange, when exchange the unit into “L”, only 8 figures are displayed. Others are only saved
without any display.
4: enter L factor and display L/min flow.
Fifth Display:
Display “ liter” pulse equivalent.( M3 unit is set by DIP Switch)
First line shows function code 02
The second line is shown:
100: means 100L
10: means: 10L
1: means: 1L (change by “↑” key).
4
http://www.silverinstruments.com
Eighth Display: It shows the min flow of liquid turbine flow meter
First line shows Function code 05
Second line shows the min flow (8 digits)
No unit indication, M3 or L is determined by function option.
Accuracy: 0.01 M3/h or 0.01L/h
5
http://www.silverinstruments.com
Eleventh Display
First line shows Function code 08
Second line shows communication address: 01~99
6
http://www.silverinstruments.com
Twelfth Display
First line shows Function code 09
Second line shows frequency output mode:
1: Original frequency
2: frequency after treating by program.
Thirteenth Display
First line shows Function code 10
Second line shows totalized flow (changing all the time), you can modify to any value you want
(unit is same as totalized flow), 2 decimals.
Press “Ent”save and press “Esc” to quit.
7
http://www.silverinstruments.com
Fourteenth Display: display the first point of flow meter factor compensation “P1”.
The first line shows first point frequency, no decimals
The second line shows first point factor compensation with 2 decimals.
Frequency point (1-3000) and compensation factor (flow meter factor is the same as factor
setting) are needed to be set at the same time.
Fifteenth Display: display the second point of flow meter factor compensation “P2”
The first line shows second point frequency, no decimals
The second line shows second point factor compensation with 2 decimals.
The displaying format is the same as above.
Sixteenth Display: display the third point of flow meter factor compensation “P3”
The first line shows third point frequency, no decimals
The second line shows third point factor compensation with 2 decimals.
The displaying format is the same as above.
Seventeenth Display: display the fourth point of flow meter factor compensation “P4”
The first line shows fourth point frequency, no decimals
The second line shows fourth point factor compensation with 2 decimals.
The displaying format is the same as above. Liquid turbine flow meter is a kind of diesel flow
meter
Eighteenth Display: display the fifth point of flow meter factor compensation “P5”
The first line shows fifth point frequency, no decimals
The second line shows fifth point factor compensation with 2 decimals.
The displaying format is the same as above.
8
http://www.silverinstruments.com