Beruflich Dokumente
Kultur Dokumente
a. automatic switch
b. manual switch
c. multi-contact switch
3- Designation of switch voltage rating is based on the ________ of the voltage values.
a. Maximum
b. Minimum
c. Nominal
4- ___________ type of switch is the best to be used for the aircraft flap operation.
a. Single pole single throw
b. Double pole double throw
c. Double pole single throw
8- Circuit protection device must always be connected in ____________ with the component or
circuit that it has to protect.
a. series
b. parallel
c. adjacent
10- Which of the following is not suitable for aircraft circuit protection?
a. Toggle breaker
b. Automatic breaker
c. Push-pull breaker
11- The number of _______ indicates the number of different circuits that can be controlled by each
pole.
a. Positions
b. Throws
c. Poles
12- A ___________ type of switch is used to guard against the accidental actuation and turning off a
circuit.
a. Momentary
b. Rotary
c. Locked in-out (Guard-covered)
18- A _________ is an electrical device that control switching from a remote location.
a. switch
b. relay
c. fuse
22- A fuse that are designed to withstand a momentary surge of current in a circuit is a
a. fast blow fuse
b. slow blow fuse
c. circuit breaker
24- A type of switch that have many input which provide one output is known as;
a. wafer switch.
b. toggle switch
c. micro switch.
26- The type of circuit breaker that are not recommended for aircraft used is…….
a. push to reset.
b. push-pull type.
c. automatic reset.
27- The working principle of a circuit breaker to trip based on;
a. magnetic and heating effect.
b. magnetic and chemical effect.
c. heating and light effect
28- …………………………. circuit breaker can be used as a protection device and a switch.
a. Push to reset
b. Push pull type
c. Automatic reset
29- A switch must be rated to sustain more voltage and current than what the circuit normally
carries continuously, is term as :
a. rating the switch
b. derating the switch
c. catergorizing the switch