Beruflich Dokumente
Kultur Dokumente
ELECTRA-SAVER II ® XP PACKAGES
40–75 HP
60 HZ
ELECTRA-SAVER II ® XP PACKAGES
40–75 HP
60 HZ
NOTES:
All data shown is approximate.
(1) Unloaded pressure is approximately 8 psig higher.
(2) Aftercooler heat rejection is based on 100°F discharge temperature from aftercooler.
(3) Radiated heat rejection is total of compressor and motor losses.
(4) These values are somewhat dependent on pressure, but slight variances are disregarded here. Flow rates are based on 110°F
maximum allowable water outlet temperature. 40°F water, although not desirable, will be encountered in some areas, flow is 2/3
60°F flow rate.
(5) Maximum flow of 40 GPM occurs at 82°F water inlet temperature.
Aftercooler approach temperature is 15°F.