Beruflich Dokumente
Kultur Dokumente
Motorola U.S.A. Motorola Latin America Division Motorola Asia Pacific Ltd. Motorola UK Ltd.
1301 E. Algonquin Road 8000 W. Sunrise Blvd. 39/FL Natwest Tower Jays Close, Viables Industrial Estate
Schaumburg, Illinois 60196 Plantation, FL 33322 Times Square, Causeway Bay Basingstoke, Hampshire
Phone: 1-888-567-7347 Phone 1-954-723-8563 Hong Kong, PRC-SAR RG22 4PD
Phone: 852-2966-4366 Phone: +44-1256-484341
Motorola Canada Ltd.
3900 Victoria Park Avenue
North York, Ontario M2H 3H7 , Motorola and MOSCAD are trademarks of Motorola Inc. ■ All company and product names
Phone: 1-800-268-5758 are trademarks or registered trademarks of their respective companies. ■ © 2000 Motorola Inc.
■ Printed in U.S.A. ■ (0006) Merit
Motorola is an Equal Employment Opportunity/Affirmative Action Employer
Visit us on the Web at http://www.mot.com/MOSCAD
R3-11-95D
35387 R3-11-95D 3/20/01 1:13 PM Page 2
FEATURES/BENEFITS
TCP/IP Connectivity
Ethernet and TCP/IP is the communication medium and protocol One or two ports on the IP Gateway may be used for communications
commonly used in a computer Local Area Network (LAN). The LAN with MOSCAD field RTUs via different physical media and utilizing
provides connectivity among multiple users performing simultaneously different data speeds. Connection into an ethernet may occur via the
the many different tasks required by large computer system users. AUI or 10baseT port. The MOSCAD programming ToolBox software,
The IP Gateway provides an Ethernet and TCP/IP connection into the running on a PC computer, may also be connected to the IP Gateway
LAN for data from MOSCAD field RTUs. for over-the-air programming or diagnostics of the field RTUs.
The core computer system, with all features intact, may directly These connectivity capabilities permit the creation of communication
utilize field data in their SCADA applications, customer service, topographies appropriate to the needs of the system.
dispatch, Network Fault Monitoring and other operational activities.
FEATURES/BENEFITS
IP Gateway in a
SCADA System Workstations
TCP/IP on Ethernet
RTU RTU
RTU
MDLC on Wireline 10baseT
IP Gateway MDLC
on MDLC
RTU
The IP Gateway is the Radio on
RTU interface between the Radio
MOSCAD WAN and
RTU the computer LAN.
In a SCADA system (see drawing above), the central site typically via digital microwave radio
RTUs may communicate with the central site by although a direct connection to the central-site
any combination of (1) a direct connection to the Ethernet is also possible. The IP Gateway at the
Ethernet, (2) a connection via Terminal Server central site converts the data format to SNMP (the
hardware (Terminal Server support is included in required MIB is contained within the IP Gateway)
the IP Gateway), (3) two-way radio from off- for connection to the SNMP-aware host computer
Ethernet RTUs to an on-Ethernet RTU or directly via a 10baseT Ethernet. The MOSCAD
to a radio-equipped IP Gateway, or (4) a wire Programming ToolBox may be connected directly
connection directly to the IP Gateway. to the Ethernet or may be plugged into any RTU
In a Network Fault Management system (see for connectivity with any RTU in the system.
drawing below), the MOSCAD Site Fault
Managers (aka, RTUs) communicate with the
IP Gateway in an
NFM System Workstations
PC with
ToolBox software
(MOSCAD Over IP)
TCP/IP on Ethernet
SNMP
10baseT
Ethernet
Microwave Unit
The IP Gateway is the interface
between the MOSCAD
Network
IP Gateway
WAN and the computer LAN.
MOSCAD
Site Fault Manager
MDLC on
RS-232 Microwave Radio
FEATURES/BENEFITS
MOSCADRTU
IP Gateway in a
Private DataTAC system
VRM660Radio
HostComputer
T
MOSCAD MOSCADRTU
WNG RNC3000
Gateway
VRM660Radio
SCADA
Central
T
In a Private DataTAC system (see drawing above), session to forward the message to either the
the MOSCAD RTU’s MDLC protocol is wrapped co-located SCADA central computer or to a
(and unwrapped) within the protocols native to second MOSCAD RTU that is located elsewhere
the Private DataTAC system. Each MOSCAD RTU and possibly serviced by a different DBS.
communicates with one or more DBS (Data Base The IP Gateway may be contained within a NEMA
Station). The RNC (Radio Network Controller) (see front page) or may be placed on 19˝ rack
selects the signal from one DBS and forwards mount panels as shown below. The power supply
it either through the WNG (Wireless Network and backup battery may be deleted when
Gateway) to the MOSCAD IP Gateway or, if no required by the needs of the particular installation.
WNG is present, directly to the IP Gateway as The two-way radio capability of the IP Gateway
shown in the drawing. The IP Gateway analyzes normally requires the NEMA configuration be used.
the destination address embedded within the MDLC
message and initiates a second communication
IP Gateway in
rack mount configuration