Beruflich Dokumente
Kultur Dokumente
Motherboard
E2316
Revised Edition V2
October 2005
ii
Contents
Notices ................................................................................................ vi
Safety information ............................................................................. vii
About this guide ............................................................................... viii
P5V800-MX specifications summary ................................................... x
Chapter 1: Product introduction
1.1 Welcome! .............................................................................. 1-2
1.2 Package contents ................................................................. 1-2
1.3 Special features .................................................................... 1-2
1.3.1 Product highlights ................................................... 1-2
1.3.2 Innovative ASUS features ....................................... 1-4
1.4 Before you proceed .............................................................. 1-5
1.5 Motherboard overview .......................................................... 1-6
1.5.1 Placement direction ................................................ 1-6
1.5.2 Screw holes ............................................................ 1-6
1.5.3 Motherboard layout ................................................ 1-7
1.6 Central Processing Unit (CPU) .............................................. 1-8
1.6.1 Installling the CPU ................................................... 1-8
1.6.2 Installling the CPU heatsink and fan ..................... 1-11
1.6.3 Uninstalling the CPU heatsink and fan .................. 1-13
1.7 System memory ................................................................. 1-15
1.7.1 Overview ............................................................... 1-15
1.7.2 DDR Qualified Vendors List ................................... 1-15
1.7.3 Installing a DIMM ................................................... 1-17
1.7.4 Removing a DIMM ................................................. 1-17
1.8 Expansion slots ................................................................... 1-18
1.8.1 Installing an expansion card .................................. 1-18
1.8.2 Configuring an expansion card .............................. 1-18
1.8.3 Interrupt assignments .......................................... 1-19
1.8.4 PCI slots ................................................................ 1-20
1.8.5 PCI Express x1 slot ............................................... 1-20
1.8.6 AGP slot ................................................................ 1-20
1.9 Jumpers .............................................................................. 1-21
1.10 Connectors ......................................................................... 1-23
iii
Contents
iv
Contents
v
Notices
The use of shielded cables for connection of the monitor to the graphics
card is required to assure compliance with FCC regulations. Changes or
modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate
this equipment.
vi
Safety information
Electrical safety
Operation safety
• Before installing the motherboard and adding devices on it, carefully read
all the manuals that came with the package.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the
product in any area where it may become wet.
• Place the product on a stable surface.
• If you encounter technical problems with the product, contact a qualified
service technician or your retailer.
This symbol of the crossed out wheeled bin indicates that the product
(electrical and electronic equipment) should not be placed in municipal
waste.
Please check local regulations for disposal of electronic products.
vii
About this guide
This user guide contains the information you need when installing and
configuring the motherboard.
viii
Conventions used in this guide
To make sure that you perform certain tasks properly, take note of the
following symbols used throughout this manual.
Typography
Bold text Indicates a menu or an item to select
Italics Used to emphasize a word or a phrase
<Key> Keys enclosed in the less-than and greater-than sign means
that you must press the enclosed key
Example: <Ctrl+Alt+D>
Command Means that you must type the command exactly as shown,
then supply the required item or value enclosed in
brackets
ix
P5V800-MX specifications summary
x
P5V800-MX specifications summary
Manageability WfM 2.0, DMI 2.0, WOL by PME, WOR by PME, Chassis
Intrussion, PXE, RPL
Form Factor ATX form factor: 9.6 in x 8.6 in (24.4 cm x 21.8 cm)
xi
xii
This chapter describes the motherboard
1
features and the new technologies
it supports.
Product
introduction
Dual-Core CPU
Enjoy the extraordinary CPU power from the latest dual-core CPU. The
advanced processing technology contains two physical CPU cores with
individually dedicated L2 cache to satisfy the rising demand for more
powerful processing capability.
AGP 8X support
The AGP 8X (AGP 3.0) VGA interface specification enables enhanced
graphics performance with high bandwidth speeds up to 2.12 GB/s.
CrashFree BIOS 2
This feature allows you to restore the original BIOS data from the support CD
in case when the BIOS codes and data are corrupted. This protection
eliminates the need to buy a replacement ROM chip. See details on page 2-6.
• Unplug the power cord from the wall socket before touching any
component.
• Use a grounded wrist strap or touch a safely grounded object or to
a metal object, such as the power supply case, before handling
components to avoid damaging them due to static electricity
• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded
antistatic pad or in the bag that came with the component.
• Before you install or remove any component, ensure
that the ATX power supply is switched off or the
p o w e r c o r d i s d e t a c h e d f r o m t h e p o w e r s u p p l y . Failure
to do so may cause severe damage to the motherboard, peripherals,
and/or components.
Onboard LED
The motherboard comes with a standby power LED that lights up to
indicate that the system is ON, in sleep mode, or in soft-off mode.
This is a reminder that you should shut down the system and unplug
the power cable before removing or plugging in any motherboard
component. The illustration below shows the location of the onboard
LED.
P5V800-MX
®
SB_PWR
ON OFF
Standby Powered
P5V800-MX Onboard LED Power Off
Make sure to unplug the power cord before installing or removing the
motherboard. Failure to do so can cause you physical injury and damage
motherboard components.
PS/2KBMS
KBPWR
T: Mouse
B: Keyboard
COM1 CPU_FAN
LGA775
EATXPWR
PARALLEL PORT
USB12 ATX12V
P5V800-MX
24.5cm (9.6in)
CHA_FAN
USBPW12
VIA
LAN_USB34 USBPW34 P4M800
SEC_IDE
PRI_IDE
Top:Line In
Center:Line Out RTL8201CL
Below:Mic In
CD AUX
AGP
®
SATA3
SATA1
AD1986A PCIE1
SPDIF_OUT
SB_PWR VIA
SATA4
SATA2
AAFP VT8251
PCI1
Super
CR2032 3V
I/O
Lithium Cell
CMOS Power
USBPW56
USBPW78
4Mb
PCI2 CLRTC BIOS
CHASSIS
GAME FLOPPY USB56 USB78 PANEL
Before installing the CPU, make sure that the socket box is facing
towards you and the load lever is on your left.
B
This side of the cam
box should face you.
To prevent damage to the socket pins, do not remove the PnP cap
unless you are installing a CPU.
Load plate
The CPU fits in only one correct orientation. DO NOT force the CPU into
the socket to prevent bending the connectors on the socket and
damaging the CPU!
• Install the motherboard to the chassis before you install the CPU fan
and heatsink assembly
• When you buy a boxed Intel® Pentium® 4 processor, the package
includes the CPU fan and heatsink assembly. If you buy a CPU
separately, make sure that you use only Intel®-certified
multi-directional heatsink and fan.
• Your Intel® Pentium® 4 LGA775 heatsink and fan assembly comes in
a push-pin design and requires no tool to install.
If you purchased a separate CPU heatsink and fan assembly, make sure
that a Thermal Interface Material is properly applied to the CPU heatsink
or CPU before you install the heatsink and fan assembly.
Fastener
Motherboard hole
Make sure each fastener is oriented as shown, with the narrow groove
directed outward.
A B B
B A
3. When the fan and heatsink assembly is in place, connect the CPU fan
cable to the connector on the motherboard labeled CPU_FAN1.
CPU_FAN
GND
CPU FAN PWR
CPU FAN IN
CPU FAN PWM
P5V800-MX
B A
DIMM1
DIMM2
Legend:
S i d e ( s ) : S S - Single-sided D S - Double-sided
DIMM support:
A - Supports one module inserted in any slot.
B - Supports one pair of modules inserted into both slots.
Make sure to unplug the power supply before adding or removing DIMMs
or other system components. Failure to do so may cause severe damage
to both the motherboard and the components.
2
1. Unlock a DIMM socket by DDR DIMM notch
pressing the retaining clips
outward.
1
2. Align a DIMM on the socket such
that the notch on the DIMM
matches the break on the
socket. 1
A DDR DIMM is keyed with a notch so that it fits in only one direction.
DO NOT force a DIMM into a socket to avoid damaging the DIMM.
Support the DIMM lightly with your fingers when pressing the retaining
clips. The DIMM might get damaged when it flips out with extra force.
1. Turn on the system and change the necessary BIOS settings, if any.
See Chapter 2 for information on BIOS setup.
2. Assign an IRQ to the card. Refer to the tables on the next page.
3. Install the software drivers for the expansion card.
When using PCI cards on shared slots, ensure that the drivers support
“Share IRQ” or that the cards do not need IRQ assignments. Otherwise,
conflicts will arise between the two PCI groups, making the system
unstable and the card inoperable.
Install only 1.5 V or 0.8 V AGP cards on this motherboard! 3.3V AGP
cards are not supported in this motherboard.
P5V800-MX
Except when clearing the RTC RAM, never remove the cap on CLRTC
jumper default position. Removing the cap will cause system boot failure!
P5V800-MX
CLRTC
1 2 2 3
Normal CLEAR
P5V800-MX Clear RTC RAM (Default)
You do not need to clear the RTC when the system hangs due to
overclocking. For system failure due to overclocking, use the C.P.R. (CPU
Parameter Recall) feature. Shut down and reboot the system so the BIOS
can automatically reset parameter settings to default values.
KBPWR
1 2 2 3
+5V +5VSB
P5V800-MX
(Default)
+5V +5VSB
P5V800-MX
(Default)
USBPW56
®
USBPW78
3
2 2
1
P5V800-MX USB device wake-up +5V +5VSB
(Default)
• The USB device wake-up feature requires a power supply that can
provide 500mA on the +5VSB lead for each USB port; otherwise,
the system would not power up.
• The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.
11 10 9 8 7
FLOPPY PIN 1
®
1. Follow the hard disk drive documentation when setting the device in
master or slave mode.
2. Pin 20 on each IDE connector is removed to match the covered hole
on the UltraATA cable connector. This prevents incorrect orientation
when you connect the cables.
3. The hole near the blue connector on the UltraATA cable is
intentional.
SEC_IDE
PRI_IDE
PIN 1 PIN 1
P5V800-MX IDE connectors
SATA3 SATA1
GND GND
RSATA_TXP3 RSATA_TXP1
RSATA_TXN3 RSATA_TXN1
GND GND
P5V800-MX
RSATA_RXP3 RSATA_RXP1
RSATA_RXN3 RSATA_RXN1
GND GND
SATA4 SATA2
®
GND GND
RSATA_TXP4 RSATA_TXP2
RSATA_TXN4 RSATA_TXN2
GND GND
RSATA_RXP4 RSATA_RXP2
RSATA_RXN4 RSATA_RXN2
GND GND
CPU_FAN
GND
CPU FAN PWR
CPU FAN IN
CPU FAN PWM
P5V800-MX
CHA_FAN
GND
®
+12V
Rotation
SPDIF_OUT
®
GND
SPDIFOUT
+5V
ATX12V EATXPWR
GND GND
+3 Volts Ground
+12V DC +12V DC
+12 Volts +5 Volts
+12 Volts +5 Volts
P5V800-MX
+5 Volts Ground
Ground Ground
+5 Volts PSON#
Ground Ground
+3 Volts -12 Volts
P5V800-MX ATX power connectors +3 Volts +3 Volts
P5V800-MX
CD AUX
(Black) (White)
Right Audio Channel Right Audio Channel
®
Ground Ground
Ground Ground
Left Audio Channel Left Audio Channel
USB_P6+
USB_P8+
USB_P6-
USB_P8-
USB+5V
USB+5V
GND
GND
®
NC
NC
USB56 USB78
1 1
USB+5V
USB_P5-
USB_P5+
GND
USB+5V
USB_P7-
USB_P7+
GND
Azalia-compliant
pin definition
SENSE1_RETUR
SENSE2_RETUR
Legacy AC’97-compliant
PRESENCE#
pin definition
P5V800-MX
AGND
GND
NC
NC
NC
®
AAFP
MIC2_L
MIC2_R
NC
Line out_L
Line out_R
PORT1 L
PORT1 R
PORT2 R
SENSE_SEND
PORT2 L
CHASSIS
P5V800-MX
Chassis Signal
+5VSB_MB
GND
(Default)
P5V800-MX Chassis intrusion connector
PLED SPEAKER
Speaker
Ground
Ground
PLED+
PLED-
+5V
P5V800-MX
PANEL
IDE_LED-
IDE_LED+
Ground
Ground
PWR
Reset
®
RESET
IDE_LED
PWRSW
* Requires an ATX power supply.
P5V800-MX System panel connector
2
Setup menus. Detailed descriptions
of the BIOS parameters are also
provided.
BIOS setup
2. Copy the original or the latest motherboard BIOS file to the bootable
floppy disk.
To use EX Flash feature on motherboards with onboard VGA, you will not
see the screen display when the BIOS is refreshed. Install a graphics card
into the expansion slot to display BIOS update message.
4. Insert the floppy disk that contains the BIOS file to the floppy disk
drive. When the correct BIOS file is found, EZ Flash performs the BIOS
update process and automatically reboots the system when done.
EZFlash starting BIOS update
Checking for floppy...
Floppy found!
Reading file “P5V800MX.ROM”. Completed.
Start erasing.......|
Start programming...|
Flashed successfully. Rebooting.
• Make sure that the floppy disk is not write-protected and has at
least 600 KB free space to save the file.
• The succeeding BIOS screens are for reference only. The actual BIOS
screen displays may not be exactly the same as shown.
A:\>afudos /oOLDBIOS1.ROM
3. Press <Enter>. The utility copies the current BIOS file to the floppy
disk.
A:\>afudos /oOLDBIOS1.ROM
AMI Firmware Update Utility - Version 1.10
Copyright (C) 2002 American Megatrends, Inc. All rights reserved.
Reading flash ..... done
A:\>
The utility returns to the DOS prompt after copying the current BIOS
file.
1. Visit the ASUS website (www.asus.com) and download the latest BIOS
file for the motherboard. Save the BIOS file to a bootable floppy disk.
Write the BIOS filename on a piece of paper. You need to type the exact
BIOS filename at the DOS prompt.
A:\>afudos /iP5V800MX.ROM
4. The utility verifies the file and starts updating the BIOS.
A:\>afudos /iP5V800MX.ROM
AMI Firmware Update Utility - Version 1.10
Copyright (C) 2002 American Megatrends, Inc. All rights reserved.
Reading file ..... done
Erasing flash .... done
Writing flash .... 0x0008CC00 (9%)
Do not shut down or reset the system while updating the BIOS to
prevent system boot failure!
5. The utility returns to the DOS prompt after the BIOS update process is
completed. Reboot the system from the hard disk drive.
A:\>afudos /iP5V800MX.ROM
AMI Firmware Update Utility - Version 1.10
Copyright (C) 2002 American Megatrends, Inc. All rights reserved.
Reading file ..... done
Erasing flash .... done
Writing flash .... 0x0008CC00 (9%)
Verifying flash .. done
A:\>
When found, the utility reads the BIOS file and starts flashing the
corrupted BIOS file.
DO NOT shut down or reset the system while updating the BIOS! Doing
so can cause system boot failure!
4. Restart the system after the utility completes the updating process.
1. Remove any floppy disk from the floppy disk drive, then turn on the
system.
2. Insert the support CD to the optical drive.
3. The utility displays the following message and automatically checks
the floppy disk for the original or updated BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
DO NOT shut down or reset the system while updating the BIOS! Doing
so can cause system boot failure!
4. Restart the system after the utility completes the updating process.
The recovered BIOS may not be the latest BIOS version for this
motherboard. Visit the ASUS website (www.asus.com) to download the
latest BIOS file.
Quit all Windows® applications before you update the BIOS using this
utility.
1. Launch the ASUS Update utility from the Windows® desktop by clicking
Start > Programs > ASUS > ASUSUpdate > ASUSUpdate e. The
ASUS Update main window appears.
• The default BIOS settings for this motherboard apply for most
conditions to ensure optimum performance. If the system becomes
unstable after changing any BIOS settings, load the default settings
to ensure system compatibility and stability. Select the L o a d
D e f a u l t S e t t i n g s item under the Exit Menu. See section “2.7 Exit
Menu.”
• The BIOS setup screens shown in this section are for reference
purposes only, and may not exactly match what you see on your
screen.
• Visit the ASUS website (www.asus.com) to download the latest BIOS
file for this motherboard and .
To select an item on the menu bar, press the right or left arrow key on the
keyboard until the desired item is highlighted.
System Information
:[Not Detected]
+-
Select Screen
Select Item
Change Field
Tab Select Field
F1 General Help
[AGP/PCI]
[ 64 MB]
Refer to section “2.2.1 BIOS menu screen” for information on the menu
screen items and how to navigate through them.
Type [Auto]
LBA/Large Mode [Auto]
Block(Multi-sector Transfer)M [Auto]
PIO Mode [Auto]
DMA Mode [Auto]
Smart Monitoring [Auto]
32Bit Data Transfer [Disabled]
The BIOS automatically detects the values opposite the dimmed items
(Device, Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra
DMA, and SMART monitoring). These values are not user-configurable.
These items show N/A if no IDE device is installed in the system.
Type [Auto]
Selects the type of IDE drive. Setting to Auto allows automatic selection of
the appropriate IDE device type. Select CDROM if you are specifically
configuring a CD-ROM drive. Select ARMD (ATAPI Removable Media Device)
if your device is either a ZIP, LS-120, or MO drive.
Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]
AMIBIOS
Version : 0005
Build Date : 09/08/05
Processor
Type : Genuine Intel(R) CPU 3.20GHz
Speed : 2800 MHz
Count : 1
System Memory
Size : 512MB
AMI BIOS
Displays the auto-detected BIOS information
Processor
Displays the auto-detected CPU specification
System Memory
Displays the auto-detected system memory
Take caution when changing the settings of the Advanced menu items.
Incorrect field values may cause the system to malfunction.
JumperFree Configuration
USB Configuration
CPU Configuration
Chipset
Onboard Devices Configuration
PCIPnP
The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the item shows
None.
Do not disable the BIOS EHCI Hand-Off option if you are running a
Windows® operating system with USB device.
Manufacturer: Intel
Brand String: Intel(R) Pentium(R) 4 CPU 2.80GHz
Frequency : 2806Mhz
FSB Speed : 800Mhz
Cache L1 : 16 KB
Cache L2 : 1024 KB
Cache L3 : 0 KB
Ratio Status: Unlocked (Max:19, Min:14)
Ratio Actual Value: 14
Ratio CMOS Setting: [ 16]
Max CPUID Value Limit: [Disabled]
Excute Disable Function [Disabled]
Hyper Threading Technology [Disabled]
2.4.3 Chipset
The Chipset menu items allow you to change the advanced chipset
settings. Select an item then press <Enter> to display the sub-menu.
BIOS SETUP UTILITY
Advanced
Advanced Chipset Settings Options for VIA P4M800
WARNING: Setting wrong values in below sections may
cause system to malfunction.
Northbridge Configuration
Southbridge Configuration
Select Screen
Select Item
Enter Go to Subscreen
F1 General Help
F10 Save and Exit
ESC Exit
NorthBridge Configuration
BIOS SETUP UTILITY
Advanced
NorthBridge Configuration Options for DRAM
DRAM Clock/Timing Configuration
AGP & P2P Bridge Configuration
The following items only appear when the DRAM Timing item is set to
[Manual].
Select Screen
Select Item
Enter Go to Subscreen
F1 General Help
F10 Save and Exit
ESC Exit
The VGA Frame Buffer Size item only appears when you use onboard
VGA.
Select Screen
Select Item
Enter Go to Subscreen
F1 General Help
F10 Save and Exit
ESC Exit
Take caution when changing the settings of the PCI PnP menu items.
Incorrect field values can cause the system to malfunction.
APM Configuration
Hardware Monitor
Select Screen
Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
APM Configuration
Hardware Monitor
Boot Settings
2.6.3 Security
The Security menu items allow you to change the system security settings.
Select an item then press <Enter> to display the configuration options.
If you forget your BIOS password, you can clear clear it by erasing the
CMOS Real Time Clock (RTC) RAM. See section “1.9 Jumpers” for
information on how to erase the RTC RAM.
After you have set a supervisor password, the other items appear to allow
you to change other security settings.
Security Settings
Exit Options
Pressing <Esc> does not immediately exit this menu. Select one of the
options from this menu or <F10> from the legend bar to exit.
If you attempt to exit the Setup program without saving your changes,
the program prompts you with a message asking if you want to save
your changes before exiting. Press <Enter> to save the changes while
exiting.
Discard Changes
This option allows you to discard the selections you made and restore the
previously saved values. After selecting this option, a confirmation appears.
Select Y e s to discard any changes and load the previously saved values.
Software
support
Click an icon to
display support
CD/motherboard
information
The VIA/S3G UniChrome Family Display Driver item only appears when
you use onboard VGA.
ASUS PC Probe II
This smart utility monitors the fan speed, CPU temperature, and system
voltages, and alerts you of any detected problems. This utility helps you
keep your computer in healthy operating condition.
ASUS Update
The ASUS Update utility allows you to update the motherboard BIOS in a
Windows® environment. This utility requires an Internet connection either
through a network or an Internet Service Provider (ISP). See page 2-8 for
details.
Anti-Virus Utility
Installs the anti-virus program. View the online help for detailed
information.
Most user manual files are in Portable Document Format (PDF). Install
the Adobe® Acrobat® Reader from the U t i l i t i e s m e n u before opening
a user manual file.
The RAID BIOS information on the setup screen shown below is for
reference only. What you see on your screen may not exactly match
what is shown here.
Use arrow keys to move selection bar on items and press <Enter> to
select.
7. Select S t a r t C r e a t e P r o c e s s and press <Enter> to set up hard disk
for RAID system. The following confirmation message appears:
8. If you select <Y> the utility will duplicate your data. Press <Y>
anytime if you want to exit the duplication process.
Duplicating...
RAID 1 for data protection
Press Yes(Y) to Escape