Beruflich Dokumente
Kultur Dokumente
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
List of NDT & Inspection
Approved Training Organisations
CONTENTS
Part 1 – Accredited Non‐Destructive Testing (NDT) Courses Available Page 3
Part 2 – Courses outside the scope of PCN meeting specific criteria Page 14
Part 3 – Providers of individually designed level 3 training packages recognised by BINDT Page 18
1
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
Foreword
Approval of Level 3 Training.
The BINDT Approval Panel, which reports to MQ&E (Membership, Qualification and Education Committee) routinely accredits training courses at Level 1 and 2.
Courses are approved as meeting specific requirements, (generally defined in terms of an examination syllabus) and the object of the exercise is to ensure that all
aspects of the syllabus are addressed within the training course at a suitable level and depth.
Most courses that are accredited will be for training prior to PCN examinations but that need not always be the case. For instance if an ATO has a requirement to
train candidates to perform a range of well defined tasks, then a training course could be designed, and subsequently accredited by BINDT as meeting those
requirements and would be listed under part 2 of the approval list.
The syllabus is well defined, therefore a training course can be designed to cover those areas of learning. This works well for Level 1 and Level 2 training but it
does not work at Level 3.
Level 3 courses need to be well versed in a very broad range of knowledge and the candidate should be familiar with Product Technology, the other four main NDT
methods, Procedure Writing and so on.
The way that we address this dilemma is to define three main requirements that training centres must meet if they are to be recognised as providers of Level 3
training:
1. The tutors must be Level 3 Certificated.
2. The training school must have available the defined Essential Reading material.
3. There must be a system in place whereby candidates are assessed on arrival, (or beforehand), in order to identify the gaps in their knowledge. The
training course must then be specifically designed to address those areas of weakness.
The course content must be designed as a bespoke product, suited to a particular individual. Any training establishment that meets the three requirements set
out above may request that BINDT recognises that they are capable of offering Level 3 training courses and once proven at audit can be listed under part 3 of the
approval list but will not be included on their certificate of approval.
2
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
PART I
Accredited Non‐Destructive Testing (NDT) Courses Available
Note: Courses validated as suitable pre‐approval training for PCN examinations also broadly satisfy the General Theory and Product Technology requirements of
employer‐based schemes (e.g. NAS 410, EN 4179 and SNT TC 1A).
Any course offered under a company‐based certification scheme must also satisfy the requirements of the employer’s written practice and training programme.
It is the employer’s responsibility that any necessary company specific training that would fall outside the validated course syllabus and content is adequately
addressed. Condition Monitoring courses are in accordance with ISO18436 and CMGEN.
All courses listed below are approved as suitable preparation for the corresponding PCN examinations.
3
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
KEY TO CODES TO DEFINE SCOPE OF APPROVAL
Numbers in bold type indicate the certification level at which the course(s) are aligned.
Letter(s) indicate the product sector to which each course is aligned.
4
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
APPROVED TRAINING ORGANISATIONS ‐ UK
EAST ANGLIA –
RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
International School of Aerospace NDT Contact: Wayne Middleton
Unit 2, Beech Avenue T: +44 (0) 1603 260148.
E: info@isandt.co.uk 1,2 1,2 1,2 1,2 1,2
Taverham
A A A A A
Norwich E: wayne.middleton@isandt.co.uk
NR8 6HW W: www.isandt.co.uk
TWI Ltd ‐ Cambridge
Contact: Michael Skerik TOFD
Granta Park
T: +44 (0) 1223 899 500 2 2 1,2 1,2 1,2 2
Abington
E: trainexam@twitraining.com W,C W,C G W,F,C W,F,C F,A
Cambridge
W: www.twitraining.com PA
CB21 6AL
Tri Service School of NDT
71 (IR) Squadron, Building 716 Contact: Andrew Murray
2 2 2 2 2
RAF Wittering T: +44 (0) 1780 417912
A A A A A
Peterborough E: 71irsqn‐ndttech07@mod.uk
PE8 6HB
EAST of ENGLAND – GUIDED
RT RI CRT UT MT PT ET VT WI ACFM WAVE
Name of Approved Training Organisation & Contact Details
Aerospace Inspection Training Ltd Contact: Samantha Wright
1,2
Units 9 & 10 Takeley Business Centre T: +44 (0) 1279 870276
1,2a A 1,2 1,2 1,2
Dunmow Road E: Jayn.lone@aerospacendt.co.uk 1,2
A A A A
Takeley, Essex E: samantha.wright@aerospacendt.co.uk
PA
CM22 6SJ W: www.aerospacendt.co.uk
Guided Ultrasonics (Training) Ltd Contact: Mark Evans
Unit 3 Brentwaters Business Park T: +44 (0) 845 605 0227 1
The Ham, Brentwood E: info@guided‐ultrasonics.com Wavemaker
TW8 8HQ W: www.guided‐ultrasonics.com
5
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
APPROVED TRAINING ORGANISATIONS ‐ UK
EAST MIDLANDS –
RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
SERCO Limited
Room 130 Stephenson House
Contact: Paul Seaton
RTC Business Park 1,2, C,D 1,2
London Road
T: +44 (0)1332 264 782 1R W,F,C,R
E: paul.Seaton@serco.com
Derby
DE24 8UP
NORTH EAST –
RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
NDT Centre (Oceaneering Inspection)
Contact: Geoff Mason
109 Bowesfield Lane 2 2 2 2 2
T: +44 (0) 1642 604 661
Stockton‐on‐Tees W W W W W
E: gmason@oceaneering.com
TS18 3HF
TWI Technology and Training Centre 2
Contact: Michal Skerik
(North East) F,A
T: +44 (0) 1642 216320 2 2 1,2 2 2 2
Ferrous Road
E: michal.skerik@twi.co.uk W,F,C W,C G W W,F,C W,F,C
Riverside Park 1,2
W: www.twitraining.com
Middlesbrough Wf
TS2 1DJ
AIS Shoreland Training NDT Ltd
Contact: Eve Roberts
3 & 4 Jupiter Court 2
T: +44 (0)844 800 1810 1,2 1,2 1,2
Tyne Tunnel Trading Estate 1,2 1,2 1,2
E: eve@shorelandndt.com W W,F W,F,C W,F,C W
Newcastle Upon Tyne W,F,C
W: www.shorelandndt.com
NE29 7SE
6
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
APPROVED TRAINING ORGANISATIONS ‐ UK
NORTH WEST –
RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
Talon NDT Blackpool Ltd
Contact: Lynn Brodie
1 & 2 Keystone Court 2
E: lynnbrodie@talonndtblackpool.com 1,2 1,2 1,2 1,2
Hallam Way, Blackpool W
T: +44 (0) 1253 696400 W,F W,F,C W,F,C W
Lancashire
W: www.talonblackpool.com
FY4 5NZ
SCOTLAND – RT RI CRT UT MT PT ET VT WI ACFM ISI UT
Name of Approved Training Organisation & Contact Details
Fife College Contact: Peter McPherson
Future Skills Centre, Stenton Road T: +44 (0) 1592 223 355/223 387 1,2
2 2 1,2 1,2 1,2 2
Glenrothes E: petermcpherson@fife.ac.uk W,F,C
W W W W,F,C W,F,C
Fife E: tifferyjen@gmail.com
KY6 2RA W: www.fife.ac.uk/
Array Training Limited 1,2
C/O Rigmar Group Contact: Ray Wilson/Claire Fyvie
W
T: +44 (0) 1224 243 000 1,2
Hareness Circle
E: Ray.Wilson@arraytraining.com Basic 2 1,2 1,2 1,2
1,2 ISI UT
Aberdeen Rad W W,F W,F W,F W
AB12 3LY E: info@arraytraining.com
W: www.rigmartraining.com Safety
7
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
APPROVED TRAINING ORGANISATIONS ‐ UK
SCOTLAND – cont’d… RT RI CRT UT MT PT ET VT WI ACFM
Talon NDT Ltd
Unit 6, Murcar Commercial Park 1,2
Contact: Ian Judge W 2
Denmore Road 1,2 1,2 1,2 1,2
T: +44 (0) 1224 822 251 Basic
Bridge of Don W
E: info@talonndt.co.uk W,F W,F,C W,F,C W
Aberdeen Rad
W: www.talonndt.co.uk
AB23 8JW Safety
TWI Aberdeen
Contact: Andrew Jeffreys
Unit 20 Spires Business Centre, 1,2
T: +44 (0) 1224 691 222 2 1,2 1,2 1,2 1,2
Mugiemoss Road, Bucksburn G
E: andrew.jeffreys@twi.co.uk W,C W W,F,C W,F,C W
Aberdeen
W: www.twitraining.com
AB21 9BG
Sonomatic Ltd Main Contact: Chris Stanton
1,2
The Core Industrial Estate Contact: Donna Stewart
W,F
Berryhill Crescent T: +44 (0) 1224 823960
2 1,2 1,2 1,2
Murcar E: chris.stanton@sonomatic.com
W TOFD W,F,C W,F,C We
Aberdeen E: peter.conlin@sonomatic.com
PA
AB23 8AN E: donna.stewart@sonomatic.com
(W,F)
W: www.sonomatic.com
WALES –
RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
South West School of NDT
Merton House Contact: Michelle Clapham
1,2 1,2 1,2
Croescadarn Close T: +44 (0) 292 054 0000 1,2 2 1,2 1,2
W,F,C, W,F,C, 2
Pentwyn E: training@minton.co.uk W,A W A,W A,F W,F,C
A A
Cardiff W: www.swsndt.co.uk
CF23 8HF
Testia Ltd Contact: Charlotte Smith
Quadrant House, Celtic Springs, T: +44 (0) 1633 715811 1,2 1,2 1,2 1,2 1,2
Coedkernew, Newport E: charlotte.smith@airbus.com A A A A A
NP10 8FZ W: www.testia.com
8
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
APPROVED TRAINING ORGANISATIONS ‐ UK
WEST MIDLANDS –
RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
NDT Consultants Ltd
Contact: Linda Dulay
Middlemarch House
T: +44 (0) 24 7651 1151 1,2 1,2 1,2 1,2
Siskin Drive
E: sales@ndt‐consultants.co.uk F,C,A F,C,A F,C,A F,C,A
Coventry
W: www.ndt‐consultants.co.uk
CV3 4FJ
YORKSHIRE & HUMBER –
RT RI CRT UT MT PT ET VT WI ACFM ISI UT
Name of Approved Training Organisation & Contact Details
IMechE Engineering Training Solutions
Contact: Stephen Wisniewski 1,2
4 Europa View 1,2 1,2 1,2
Sheffield Business Park
T: +44 (0) 114 399 5720 1,2 2
W,F,
W,F,C
W,F,C, W,F,C,
1,2 1,2
1,2
ISI UT
E: arl@imeche.org W,F,C W,C TOFD W W,F,C
Sheffield C R R
W: www.imeche.org/arl PA
S9 1XH
1,2
W,F,C 1,2
Lavender International NDT
Contact: Susan Young F g
Consultancy Services Limited 1,2
T: +44 (0) 1226 765 769 1,2 2 1,2 1,2 1,2 1,2
Unit 7, Penistone Station
E: bev@lavender‐ndt.com W,F,C W,C
W,F,
TOFD‐ W,F,C W,F,C W,F,C
2
W
ISI UT
Sheffield C
W: www.lavender‐ndt.com W 1,2
S36 6HP
PA ‐ W e
W,F,C
NDT Ltd
Contact: Mr S Sennett
Maltravers Road 2 2 2
T: +44 (0) 1142 727 317 1,2
Sheffield W,F,C, W,F,C, W,F,C,
E: sales@ndt.ltd.uk W,F
South Yorkshire A A A
W: www.ndt.ltd.uk
S2 5AD
LIBERTY STEEL Contact: Mr John Barker
Stocksbridge T: +44 (0) 1142 832 071
1,2
Sheffield E: john.barker@specialityuk.com
S36 2JA W: www.libertyspecialitysteels.com
9
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
APPROVED TRAINING ORGANISATIONS – EUROPE AND WORLDWIDE
AUSTRALIA – RT RI CRT UT MT PT ET VT WI ACFM ISI UT
Name of Approved Training Organisation & Contact Details
ATTAR Contact: Paul Grosser
Unit 1, 64 Bridge Road T: +61 3 9574 6144 2 2 2 2
Keysborough, Victoria E: paulgrosser@attar.com.au W W W,F,C W,F,C
3173 Australia W: www.attar.com.au
1,2
TCS NDT Contact: Alisa Hewling 1,2
W1,2 1,2
19 Weymouth Boulevard, Quinn’s T: +61 (0) 415 573095
Basic
TOFD
1,2 1,2 ISI UT
Rocks, Perth WA E: info@tcsndt.com.au W,F,C W,F,C W
Rad PA (W)
Australia 6030 W: www.tcsndt.com.au
Safety
CHINA (PEOPLE’S REPUBLIC) – RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
SGS (Shanghai) NDT Training &
1,2
Examination Centre Contact: Shelley Xu 1,2
W,F,C
SGS‐CSTC Standards Technical Services T: +86 (0)21 6818 3905 W,C 2 1,2 1,2 1,2
Co Ltd, 2F, Building 8, No 69, 1159 East E: shelley.xu@sgs.com 1,2 W,Cb W,F,C W,F,C W,F,C
TOFD
Kangqiao Road, Pudong District, W: www.sgs.com C
PA (W)
Shanghai 201319, P.R. China
10
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
CARIBBEAN – RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
NDE Institute of Trinidad Ltd Contact: Sonny James
15 Robertson Street, T: (868) 653 9343
Les Efforts East, T: (868)‐657‐6572
1,2 1,2 1,2
San Fernando, Trinidad W.I. E: sjames@learnndt.com
W W,F,C W,F,C
E: loriann.keane@gmail.com
E: info@learnndt.com
W: www.learnndt.com
GREECE – RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
VOCATIONAL TRAINING CENTER:
INDUSTRIAL AND BUSINESS EDUCATION
AND TRAINING INSTITUTE‐ SEV Hellenic Basic
federation of enterprises. Contact: Mr Thanos Totsikas
Rad
T: +30 210 8257 817 1,2 1,2 1,2 1,2
KΕΚ Ι.V.EP.E‐SEV Safety 2
E: thtotsikas@ivepe.gr W,P W,F,C W,F,C W,F,C
143 Liossion & 6 Theirsiou Str. course
W: www.ivepe.gr
Attikis Square ONLY
10445 Athens
Greece
1,2
TQCC/Lavender Greece Contact: Athena Xirofotou W
Z Pigis 51 T: +30 24210 59881 1,2 2 ‘PLATE’ 1,2 1,2 1,2 1,2
2
382 22 Volos Magnesia E: tqcc@vol.forthnet.gr W W F,C W,F,C W,F,C F W,F,C
Greece W: www.ketepe‐ndt.com
PA 1,2
11
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
GREECE – Cont’d….. RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
1,2
TQCC/Lavender Greece W
Contact: Dimitrios Pitteris & Apostolos Kotouas 2 1,2
G. Papandreou 150, 14452 Metamorfosi, 1,2 ‘PLATE’ 1,2 1,2 1,2
E: info@tqcc.gr F 2
Athens, Greece W W F,C W,F,C W,F,C W,F,C
T: +3024210 59881
PA 1,2
INDIA – RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
Noble Quality Evaluation Private Ltd Contact: Mr Ramesh Narayanasamy
Plot no. 20 & 21, Anjaneya Nagar (Near T: +91 822 095 4947 2 1,2 1,2 1,2
Miet), Gundur (Post), Tiruchirapalli, E: nobleqe@gmail.com W b W W W
620007, Tamil Nadu, India W: www.nobleqe.com
BIT inspection Technology
No. 11, 6th Pillaiyar Koil Street, Ambal Contact: Rajamanickam Baskar
1,2 2 1,2 1,2 1,2
T: +91 98408 00863
Nagar, Ekkatthuthangal, Chennai W W b W W W
E: rbaskar@bitndtindia.com
India 600032
1,2
Smart Technocrats and Consultancy
W
Services (I) Pvt. Ltd Contact: Sunil Mukul
1,2 2 1,2 1,2
Plot No. 5ector 18A, Nerul, Navi, T: +91 22 2770 6055
W W b TOFD W W
Mumbai, India 400706 E: smartndt@vsnl.com / sunilmukul@redifmail.com
PA (W)
A‐Star Training and Consultancy Pvt Ltd 1,2
“Shree” Building, 47/11‐1 Devadi Street, Contact: Anup Nair W
2 1,2 1,2
Off Kutchery Road Near More T: +91 44 2495 0082
W W W
Supermarket, Mylapore, Chennai E: anup@astar‐training.com TOFD
600004 Tamil Nadu, India PA (W)
1,2
TWI India Pvt. Ltd Contact: Ayyala Venkateswara W
2 1,2 1,2
78/97 Chamiers Road, Nandanam, T: +91 (0) 44 43189691 /2 /3 /4
W b W,F,C W,F,C
Chennai, 600018 India E: andarasan.kp@twiindia.com PAUT
TOFD
12
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
INDIA Cont’d ‐
Name of Approved Training Organisation & Contact Details RT RI CRT UT MT PT ET VT WI ACFM
ROYAL TECH TRAINING &
CONSULTANCY
Contact: Raja Suhas
Plot no A75, Opp Petrol Pump, VUDA 2 1,2 1,2 1,2
T: +91 8916524882
colony, Wb W W W
E: royaltech@gmail.com
gopalapatnam, Visakapatnam‐ 530027
Andrapradesh, India
Trichy Institute for Welding
M.S.A Complex, 1st Floor, Rail Nagar.
Ariyamangalam, PCN Coordinator: M Riyaz
1,2 2 1,2 1,2 1,2
Trichy, T: +914312442118
W W W W W
620010 E: tiwpcnaudit@gmail.com
Tamil Nadu
India
INDONESIA – RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
Indonesia Institute of NDT (IINDT)
Contact: Brillian Wiraprima Sardi
Trikarsa Equalita, Block C, No 12, Sei 2 1,2 1,2 1,2
T: +62 778 472 122 1,2
Panas, Batam, Indonesia 29433 W W W,F,C W,F,C
E: berry@iindt.com
PT WENS QUALITY ASSURANCE Contact: Mr. P. Sasikumar
Komplex Pertokoan air mas, Block C, Tel no. +62 778 7486216 / 812 76663599
No.2 Batam Center Email : sasi@wensgroup.com 2 1,2 1,2 1,2 1,2
Batam Email : angelayiu@wensgroup.com W W W W W
29461 Website: www.wensgroup.com / www.ptwens.com
Indonesia
MALAYSIA – RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
1,2
TWI TECHNOLOGY (S.E.ASIA) SDN BHD Contact: Noorhaslinda Binti Ahmad Nasir
W 1,2 1,2
No. 1, Jalan Utarid U5/13, Section U5, T: +603‐7848 1000 2
W,F,C, W,F,C,
E: inquiry@twisea.com W
40150, Shah Alam, Selangor Darul Ehsan TOFD A A
W: www.twitraining.com
PA
13
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
MALAYSIA Cont’d – CRT ET VT WI ACFM
RT RI UT MT PT
Name of Approved Training Organisation & Contact Details
Nilai Technical Training Centre‐NTTC
Contact: Sabri Ngah 1,2
PT 7328, Jalan BBN 1/2E
T: +606‐7947879 1,2 1,2 1,2 1,2
Putra Nilai, 71800 Nilai W
E: enquires@nttc‐my.org W W W W
Negeri Sembilan
W: www.nttc‐my.org
Malaysia
Ruane‐TATI Sdn Bhd (Terengganu Advanced
Contact: Azmil Mohamad
Technical Institute) 1,2
T: +609 863 1033 2 1,2 1,2 1,2 1,2
PT 4847, Jalan Panchor, Telok Kalong, 24000
E: azmil.mohamad@ruane‐tati.com W b & l W W,F,C W,F,C W
Kemaman, Terengganu
W: www.ruane‐tati.com
Malaysia
1,2
Contact: Natarajan Rajappan
Trident Global Training & Consultancy W 1,2
T: +65 96416878 1,2 1,2 1,2
No. 7 Jalan Cenderai 26, KWSN,
E: info@mytridentglobal.com W W W W
Perindustrian, Kota Putri, 81750, Malaysia TOFD
PA
MINDT TRAINING & CERTIFICATION SDN BHD Contact: Tan Hendry & Andy Kular 1,2
No 18 Jalan Tanjung 13/2, Bandar Sri E: hendry@mindt.com.my 1,2 1,2 1,2 1,2
Damansara, 52200, Kuala Lumpur, Malaysia E: a_kular@imeche.org W W W W W
T: + 603 6280 3448
NORWAY RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
Contact: Ravindira C Dev
APPTRAA GLOBAL AS
T: +47 4558 6749 1,2 1,2
Eiganesveien 14 1,2 1,2
E: ravin@apptrraglobalas.org
4008 Stavanger W W W W
E: dr.ananda@apptrraglobalas.org
NORWAY
E: apptrra@yahoo.no
14
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
SINGAPORE – RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
A‐Star Training and Consultancy Pte Ltd Contact: Shaik Khaja Mohiuddin 1,2
#05‐111, 18 Boon Lay Way T: +65 6465 0877 2 W 1,2 1,2
Tradehub 21 E: astar@astar‐training.com W b TOFD W W
Singapore, 609966 W: www.astar‐training.com PA
Contact: Sze Thiam Siong
1,2
SETSCO Services PTE Ltd T: +65 6566 7777 1,2 1,2 1,2
1,2 W,A
18 Teban Gardens Crescent, Singapore E: nahhs@setsco.com W,F,C, W,F,C, A
W,A
608925 E: marketing@setsco.com A A
PA
W: www.setsco.com
SOUTH AFRICA – RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
African NDT Centre (Pty) Ltd 1,2
Contact: Mr W Claassens
224 Witch‐Hazel Avenue W
T: +27 (0) 12 665 3248 1,2 2 1,2 1,2 1,2 1,2
Highveld Technopark 1,2
E: welcome@andtc.com W W W,F,C W,F,C W1 W,F,C
Centurion PA
W: www.andtc.com
South Africa W,F,C
Contact: Nish Kanaye
Non‐Destructive Academy of South
T: +27 (0) 31 708 3433
Africa CC (NASA Durban branch) 1,2 1,2 1,2 1,2
E: academy@nondestructive.co.za /
3 Pastoll Road, Sarnia 3610, Durban, W W W W
nish@nondestructive.co.za
South Africa
W: www.nondestructive.co.za
African NDT Centre (Pty) Ltd
Contact: Mr W Claassens
Suite 403, Block 4 Island Circle Office
T: +27 31 569 5054 1,2 2 1,2 1,2 1,2 1,2 1,2
Park, 35‐37 Island Circle Road 1,2
E: welcome@andtc.com W W W W,F,C W,F,C W W
Riverhorse Valley
W: www.andtc.com
Durban, South Africa
15
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
THAILAND – RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
1,2
W
A‐Star Thailand – Master
Contact: Gaurav Kaushik
Solution Co Ltd.
T: +66 38 691 152/3 2 PA (W) 1,2 1,2
41/19 Sermsuwan Road,
E: gaurav@astar‐training.com
Wb
1,2 W W
T.Maptaphut A Muangrayong,
W: www.astar‐training.com
Rayong 21150
TOFD
1,2
UNITED ARAB EMIRATES UAE –
RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
1,2
W
WENS TECHNICAL AND OCCUPATIONAL
Contact: Babu Sajeesh Kumar TOFD
SKILLS TRAINING LLC
T: +971 4554 6284 2 2 1,2 1,2 1,2
PO BOX 393179, Unit 2F‐A‐02, Empire 1,2
+971 5624 28507 W W,C W W,F,C W,F,C
Heights, Tower A, Business Bay, Dubai,
E: wensdubai@gmail.com
UAE PA(UT)
1,2
W,F,C
SAUDI ARABIA
RT RI CRT UT MT PT ET VT WI ACFM
Name of Approved Training Organisation & Contact Details
ENGINEERING TECHNOLOGY TRAINING
Contact: Motlaq Motairi
CENTER – ETTC 1,2 1,2 1,2 1,2
T: +966 92 000 2712
P.O. # 70401, Al Khobar – 31952, W W W W
E: president@axis‐inspection.com
Kingdom of Saudi Arabia
16
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
USA ‐ RT RI CRT UT MT PT ET VT WI ACFM
ISI UT
Name of Approved Training Organisation & Contact Details
LAVENDER INTERNATIONAL NDT
1,2 1,2
University Business Park, Suite F. Contact: Nicola Dodsley W,F,C
1,2 F g 1,2
15200 Middlebrook Dr. T: +44 (0) 1226 765 769 1,2 2 1,2 1,2 1,2 ISI UT
W,F,C W,F,C 2
Houston Texas E: nicola@lavender‐ndt.com W,F,C W,C TOFD W,F,C W,F,C
W: www.lavender‐ndt.com 1,2
77058 PA –
W,F,C W e
United States
17
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
PART 2
Courses listed below have been independently accredited as meeting specific criteria (generally outside the scope of PCN)
Note: Courses listed below have been designed to meet specific industrial requirements as defined by the course title. Each course is available only at the stated
training organisation. Individuals and employers are advised to study in detail the course content to ensure that it adequately meets their requirements.
Training Organisation Contact Method(s)
Aerospace Inspection Training Ltd Infrared Thermography (Aero)
Contact: Samantha Wright
Units 9 & 10 Takeley Business Centre Dunmow Road Acid Etch Inspection
T: +44 (0) 1279 870276
Takeley, Stansted Airport Bond Testing of structures using the Staverley
E: samantha.wright@aerospacendt.co.uk
Bishop’s Stortford Bondmaster
W: www.aerospacendt.co.uk
Essex, CM22 6SJ
PT Rail Upgrade
Acid Etch Inspection
26 week
Hardness Testing
IMechE Engineering Training Solutions NDT/Inspection
Conductivity Testing
4 Europa View Contact: Mr Andy Kular Training Programme
Ultrasonic Testing of
Sheffield Business Park T: +44 (0) 114 399 5720 BGAS Transition to
Wrought Plate
Sheffield E: arl@imeche.org PCN Weld Inspector
including Thickness
S9 1XH W: www.imeche.org level 2
Gauging (ISO 20807)
Infrared
Anodic Testing
Thermography level
MT Rail Upgrade
1 (SNT‐TC‐1A)
18
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
Training Organisation Contact Method(s)
T: +44 (0) 1603 260148. Infrared Thermography (Aero)
International School of Aerospace NDT E: info@isandt.co.uk
Unit 2, Beech Avenue E: Waynewayne.middleton@ISANDT.CO.UK
Taverham W: www.isandt.co.uk
Norwich
NR8 6HW
Conductivity Testing
Eddy Current Testing
Lavender International NDT Contact: Ms N Dodsley Anodic Flaw Detection
of Non‐Ferromagnetic
Unit 7, Penistone Station T: +44 (0) 1226 765 769 Composite Materials
Tubes
Sheffield E: nicola@lavender‐ndt.com (courses also available
Acid Etch Inspection
S36 6HP W: www.lavender‐ndt.com at TQCC/Lavender
Hardness Testing
Greece)
Profile Radiography GE Rad View Software Specific
NDT Centre (Oceaneering Inspection)
Contact: Melanie Holland Computed Radiography GE Rad View Software
109 Bowesfield Lane
T: +44 (0) 1642 604 661 Specific
Stockton‐on‐Tees
E: mholland@oceaneering.com Ultrasonic Time of Flight Diffraction (Basic and
TS18 3HF
Advanced)
Training Organisation Contact Method(s)
Acid Etch Inspection Visual Inspection
NDT Consultants Ltd Contact: Linda Dulay
Anodic Flaw Coating Thickness
Middlemarch House, Siskin Drive T: +44 (0) 24 7651 1151
Detection
Coventry E: sales@ndt‐consultants.co.uk measurement
Conductivity Testing
CV3 4FJ W: www.ndt‐consultants.co.uk Bond Testing
Hardness Testing
NDT Ltd Contact: Mr S Sennett
Maltravers Road T: +44 (0) 114 272 7317 Ultrasonic Testing Thickness and Laminations ISO
Sheffield E: sales@ndt.ltd.uk 20807
South Yorkshire , S2 5AD W: www.ndt.ltd.uk
Acid Etch Inspection
South West School of NDT
Contact: Michelle Clapham Hardness Testing
Merton House
T: +44 (0) 292 054 0000 Conductivity Testing
Croescadarn Close
E: michelle.clapham@minton.co.uk Anodic Testing
Pentwyn
W: www.swsndt.co.uk Laser Shearography (Aero)
Cardiff, CF23 8HF
Infrared Thermography (Aero)
19
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
Training Organisation Contact Method(s)
Sonomatic Ltd Main Contact: Chris Stanton Ultrasonic Testing of Wrought Plate including
Unit 1, Contact: Donna Stewart Thickness Gauging (ISO 20807)
Energy Development Centre, T: +44 (0) 1224 823960
Claymore Drive, E: chris.stanton@sonomatic.com
Bridge of Don, E: donna.stewart@sonomatic.com
Aberdeen , AB23 8GD W: www.sonomatic.com
Test NDT International Ltd
16 Tolsey Drive Contact: Richard/Catherine Harrison
Ultrasonic Phased Array Aircraft Inspection
Hutton T: +44 (0) 1772 616913
Composite Bond Structure Inspection (Aerospace)
Preston E: ndtguru@aol.com
Eddy Current Array Level 1 and 2
Lancashire W: www.testndt.com
PR4 5SH
TQCC/Lavender Greece Contact: Athena Xirofotou
Z Pigis 51 T: +30 24210 59881 UT Castings (SNT)
382 22 Volos E: tqcc@vol.forthnet.gr RI/RT Castings (SNT)
Greece W: www.ketepe‐ndt.com
Contact: Alisa Hewling
TCS NDT
T: +61 (0) 415 573095
19 Weymouth Boulevard, Quinn’s Rocks, Perth WA Critical Ultrasonic Assessment of Welds Defects
E: info@tcsndt.com.au
Australia 6030
W: www.tcsndt.com.au
Training Organisation Contact Method(s)
Tri Service School of NDT
Contact: Philip Byram
NDES, RAF Wittering,
T: +44 (0) 1780 417138
Peterborough, 10 week Aerospace NDT Technicians Course
E: Philip.byram781@mod.uk
Cambridgeshire
E: 71irsqn‐ndttrg01@mod.uk
PE8 6HB
TWI Aberdeen Contact: Andrew Jeffreys
Unit 20 Spires Business Centre T: +44 (0) 1224 691 222 Ultrasonic Testing of Wrought Plate including
Mugiemoss Road, Bucksburn E: andrew.jeffreys@twi.co.uk Thickness Gauging (ISO 20807)
Aberdeen, AB21 9BG W: www.twitraining.com
TWI ‐ Training & Examination Services
Contact: Michal Skerik
Granta Park
T: +44 (0) 1223 899 500 Ultrasonic Testing of Wrought Plate including
Abington
E: trainexam@twitraining.com Thickness Gauging (ISO 20807)
Cambridge
W: www.twitraining.com
CB21 6AL
20
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
Training Organisation Contact Method(s)
TWI Technology and Training Centre (North East)
Contact: Michal Skerik
Ferrous Road
T: +44 (0) 1223 899500 Ultrasonic Testing of Wrought Plate including
Riverside Park
E: trainexam@twitraining.com Thickness Gauging (ISO 20807)
Middlesbrough
W: www.twitraining.com
TS2 1DJ
NDE Institute of Trinidad Ltd
Contact: Sonny James
15 Robertson Street,
T: (868) 653 9343 Ultrasonic Testing of Wrought Plate including
Les Efforts East,
E: info@learnndt.com Thickness Gauging (ISO 20807)
San Fernando,
W: www.learnndt.com
Trinidad W.I.
Talon NDT Blackpool Ltd
Contact: Suzanne Judge
1 & 2 Keystone Court
T: +44 (0) 1253 696400 Ultrasonic Testing of Wrought Plate including
Hallam Way, Blackpool
E: info@cjis‐ltd.com Thickness Gauging (ISO 20807)
Lancashire
W: www.talonndtblackpool.com
FY4 5NZ
Contact: Charlotte Smith
T: +44 (0) 1633 715811
E: charlotte.smith@airbus.com Magnetic Particle Testing EN 4179
W: www.testia.com Liquid Penetrant Testing EN 4179
Testia Ltd
Radiographic Testing EN 4179
Quadrant House, Celtic Springs, Coedkernew, Newport
Eddy Current Testing EN 4179
NP10 8FZ
Ultrasonic Testing EN 4179
21
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
PART 3
Historically, a number of Approved Training Organisations have offered level 3 training courses. By definition, these courses must be tailored to meet the
needs of individual candidates. Please refer to the Foreword on page 2.
Note: The following organisations have been recognised by BINDT as providers of individually designed level 3 training packages.
22
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
Training Organisation Contact
IMechE Engineering Training Solutions
Contact: Andy Kular
4 Europa View
T: +44 (0) 114 399 5720
Sheffield Business Park
E: arl@imeche.org
Sheffield
W: www.imeche.org
S9 1XH
International School of Aerospace NDT
T: +44 (0) 1603 260148.
Unit 2, Beech Avenue
E: info@isandt.co.uk
Taverham
E: Waynewayne.middleton@ISANDT.CO.UK
Norwich
W: www.isandt.co.uk
NR8 6HW
Lavender International NDT Contact: Nicola Dodsley
Unit 7, Penistone Station T: +44 (0) 1226 765 769
Sheffield E: nicola@lavender‐ndt.com
S36 6HP W: www.lavender‐ndt.com
South West School of NDT
Merton House Contact: Michelle Clapham
Croescadarn Close T: +44 (0) 292 054 0000
Pentwyn E: training@minton.co.uk
Cardiff W: www.swsndt.co.uk
CF23 8HF
TWI Aberdeen
Unit 20 Spires Business Centre Contact: Andrew Jeffreys
Mugiemoss Road T: +44 (0) 1224 691 222
Bucksburn E: andrew.jeffreys@twi.co.uk
Aberdeen W: www.twitraining.com
AB21 9BG
TWI ‐ Training & Examination Services
Contact: Michal Skerik
Granta Park
T: +44 (0) 1223 899 500
Abington
E: trainexam@twitraining.com
Cambridge
W: www.twitraining.com
CB21 6AL
TWI Technology and Training Centre (North East)
Contact: Michal Skerik
Ferrous Road
T: +44 (0) 1642 216320
Riverside Park
E: michal.skerik@twi.co.uk
Middlesbrough
W: www.twitraining.com
TS2 1DJ
23
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
Training Organisation Contact
SGS (Shanghai) NDT Training & Examination Centre
SGS‐CSTC Standards Technical Services Co Ltd, Contact: Shelley Xu
2F, Building 8, No 69, 1159 East Kangqiao Road T: +86 21 6119 6406
Pudong District E: shelley.xu@sgs.com
Shanghai 201319 W: www.sgs.com
P.R. China
ATTAR Contact: Paul Grosser
Unit 1, 64 Bridge Road T: +61 3 9574 6144
Keysborough, Victoria E: paulgrosser@attar.com.au
3173 Australia W: www.attar.com.au
Serco Limited
Room 130 Stephenson House
Contact: Deborah Stenson
RTC Business Park
T: +44 (0)1332 264 782
London Road
E: deborah.stenson@serco.com
Derby
DE24 8UP
WENS TECHNICAL AND OCCUPATIONAL SKILLS TRAINING LLC Contact: Babu Sajeesh Kumar
PO BOX 393179, Unit 2F‐A‐02, T: +971 4554 6284
Empire Heights, Tower A, Business Bay, T: +971 5624 28507
Dubai, UAE E: wensdubai@gmail.com
SETSCO Services PTE Ltd Contact: Sze Thiam Siong
18 Teban Gardens Crescent T: +65 6566 7777
E: marketing@setsco.com
Singapore 608925
W: www.setsco.com
NDT Consultants Ltd Contact: Linda Dulay
Middlemarch House, Siskin Drive T: +44 (0) 24 7651 1151
Coventry E: sales@ndt‐consultants.co.uk
CV3 4FJ W: www.ndt‐consultants.co.uk
24
ISSUE NO 127
APPROVED TRAINING ORGANISATIONS – NDT & INSPECTION only
DATE 11th January 2018
REF APP‐LIST‐NDT
Training Organisation Contact
African NDT Centre (Pty) Ltd
Contact: Mr W Claassens
224 Witch‐Hazel Avenue
T: +27 (0) 12 665 3248
Highveld Technopark
E: welcome@andtc.com
Centurion
W: www.andtc.com
South Africa
African NDT Centre (Pty) Ltd
Contact: Mr W Claassens
Suite 403, Block 4 Island Circle Office Park
T: +27 31 569 5054
35‐37 Island Circle Road
E: welcome@andtc.com
Riverhorse Valley
W: www.andtc.com
Durban, South Africa
LAVENDER INTERNATIONAL NDT
University Business Park, Suite F. Contact: Nicola Dodsley
15200 Middlebrook Dr. T: +44 (0) 1226 765 769
Houston Texas E: nicola@lavender‐ndt.com
77058 W: www.lavender‐ndt.com
United States
AEROSPACE INSPECTION TRAINING LTD Contact: Samantha Wright
Units 9 & 10 Takeley Business Centre T: +44 (0) 1279 870276
Dunmow Road, Takeley E: Jayn.lone@aerospacendt.co.uk
Bishops Stortford, CM22 6SJ E: samantha.wright@aerospacendt.co.uk
W: www.aerospacendt.co.uk
25