0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
67 Ansichten3 Seiten
The document provides specifications for the FAS8040 including:
- Maximum capacities of 5760 TB raw capacity per HA pair and 720 storage devices
- Processor specifications of 2 x 64-bit 8-core 2.10 GHz processors and 64 GB memory
- Environmental requirements including an operating temperature range of 50 to 104°F and altitude range of 0 to 10,000 feet
- Notes on minimum raw capacity requirements for spray core dumps and supported adapter cards
The document provides specifications for the FAS8040 including:
- Maximum capacities of 5760 TB raw capacity per HA pair and 720 storage devices
- Processor specifications of 2 x 64-bit 8-core 2.10 GHz processors and 64 GB memory
- Environmental requirements including an operating temperature range of 50 to 104°F and altitude range of 0 to 10,000 feet
- Notes on minimum raw capacity requirements for spray core dumps and supported adapter cards
The document provides specifications for the FAS8040 including:
- Maximum capacities of 5760 TB raw capacity per HA pair and 720 storage devices
- Processor specifications of 2 x 64-bit 8-core 2.10 GHz processors and 64 GB memory
- Environmental requirements including an operating temperature range of 50 to 104°F and altitude range of 0 to 10,000 feet
- Notes on minimum raw capacity requirements for spray core dumps and supported adapter cards
System Maximums and Limits Max Raw capacity (HA) 5760 TB Max Storage Devices (HA) 720 (drives & array LUNs) Max Nodes per Cluster (NAS 24 / 8 / SAN) Max Aggregate Size 32-bit Not Supported Max Aggregate Size 64-bit 324 TiB Max FabricPool Size Not Supported Min Root Aggregate Size 431 GiB Max FlexVol Size 32-bit Not Supported Max FlexVol Size 64-bit 100 TiB Max Infinite Volume Data 100 TiB Constituent Size Max FlexGroup Data Not Supported Constituent Size Max Volume Count (Per 1000 Node) Min Root Volume Size 350 GiB NetApp Volume Encryption Not Supported FlexArray Specifications Spray Core Array LUNs Recommended Min Raw 4.39 TiB [1] Capacity Spray Core Array LUNs 2.64 TiB [2] Absolute Min Raw Capacity Max Array LUN Size 5.72 TiB [4] Min Array LUN Size 1.05 GiB Min Size for an Array LUN 80.00 GiB Aggregate Min Array LUN Size – Root 634.00 GiB Volume Spare Core Array LUN Min 52.00 GiB Size Max RAID Groups in an 150 Aggregate Block Size 512 bytes Neighborhood Visible and - Assigned Devices Technical Specifications per HA pair Processor 2 x 64-bit 8-core 2.10 Ghz Memory 64 GB NVRAM 16 GB 8 x RJ45 (1Gb) Ethernet Ports 8 x SFP+ (10Gb) Fibre Channel Ports - UTA2 Ports 8 x SFP+ (10Gb/16Gb) [5] Expansion Slots 8 x PCIe3 SAS Ports 8 x QSFP (6Gb) Physical Characteristics Rack Units 6 Chassis Height 10.2" (25.9 cm) Chassis Width with 18.94" (48.1 cm) Mounting Flanges Chassis Width without 17.6" (44.7 cm) Mounting Flanges Chassis Depth with Cable 28.9" (73.4 cm) Mgmt Chassis Depth without 24.29" (61.7 cm) Cable Mgmt Chassis Weight - One 100.97 lb (45.8 kg) Controller Module Chassis Weight - Two 119.49 lb (54.2 kg) Controllers Module Chassis Weight - Controller - + IOXM System Clearance Dimensions FAS8040
Specifications
8.3.1 clustered Data ONTAP
Front Clearance (Cooling) 5.99" (15.2 cm) Front Clearance 30.02" (76.2 cm) (Maintenance) Rear Clearance (Cooling) 12.02" (30.5 cm) Rear Clearance 36.01" (91.4 cm) (Maintenance) Environmental Requirements Operating Temperature 50 to 104 deg F Range 10 to 40 deg C -40 to 158 deg F Storage Temperature Range -40 to 70 deg C -40 to 158 deg F Transit Temperature Range -40 to 70 deg C Operating Relative Humidity 20 to 80 % Storage Relative Humidity 5 to 95 % Transit Relative Humidity 5 to 95 % 0.0 to 10000.0 ft Operating Altitude Range 0.0 to 3048.0 m 0.0 to 40000.0 ft Storage Altitude Range 0.0 to 12192.0 m 0 to 39989.8 ft Transit Altitude Range 0 to 12192 m Acoustic Noise - Sound 7.5 bels Power Acoustic Noise - Sound 61.3 dBA Pressure Input Power Voltage 100 to 120, 200 to 240 Storage O/S Requirements 8.2.1RC2, 8.3RC1, 9.0RC1, 9.1RC1, Min ONTAP version 9.2RC1, 9.3RC1, 8.2.5, 8.3.2, 9.0P4, 9.1P14, 9.2P4, Max ONTAP version 9.3P7, 9.4P2 System Availability & Support EOA 31-Dec-2017 EOS 31-Jan-2023 Notes ID Notes Description A spray core occurs when there is no suitable spare core or if the spare core increase disruption time, then the system attempts to stripe the coredump over the non-file system region of multiple array LUNs. For a spray core to operate, a 1 minimum total capacity of array LUNs assigned to the system is required which is defined by this value. If greater than 2 TiB array LUNs are used, the required capacity is increased five times because the non-file system region is a smaller percentage of the total space (0.2% compared to 1%). A spray core occurs when there is no suitable spare core or if the spare core increase disruption time, then the system attempts to stripe the coredump over the non-file system region of multiple array LUNs. If there is no enough capacity available as per the Spray Core Array LUNs Recommended Min Raw Capacity (GiB) attribute value, the system attempts to 2 first compress the data before spraying. Assuming 60% compression, the system should have at least the total assigned capacity as per the Spray Core Array LUNs Absolute Min Raw Capacity (GiB) attribute value for a compressed spray core to work. If greater than 2 TiB array LUNs are used, the required capacity is increased five times because the non-file system region is a smaller percentage of the total space (0.2% compared to 1%)”. The FAS80x0 onboard UTA2 ports and X1143A UTA2 ports are not supported for connectivity to DS14 shelves. To connect to 3 DS14 shelves, use the X1132A-R6 or X2054A-R6 Fibre Channel adapters. The maximum LUN size provided is a number determined by the V-Series/FlexArray product team. Supported maximum LUN 4 size will be the lesser of published maximum LUN size by NetApp and maximum LUN size supported by the backend array The onboard UTA2 ports can be configured as FC Target/Initiator or CNA (FCoE target/Ethernet). The UTA2 ports are based on a dual port ASIC and both ports on each ASIC must be set to the same mode (enforced by Data ONTAP). Install X6599A- 5 R6 10GbE SFP+ modules or approved copper twinax cables when using in CNA (FCoE target/Ethernet) mode. Install X6596- R6 16Gb FC SFP+ module when using in FC Target/Initiator mode.