Beruflich Dokumente
Kultur Dokumente
com
F0/23
F0/23
SW1 SW2
Configure 5 VLANs respectively on SW1 and SW2
Vlan 2 name ABC
Vlan 6 name cisco
m
Vlan 11 name BB1
Vlan 12 name BB2
Vlan 13 name BB3
co
SW1:
e.
vlan database
vlan 2 name ABC
vlan 6 name cisco r
su
vlan 11 name BB1
vlan 12 name BB2
vlan 13 name BB3
s4
exit
SW2:
as
vlan database
vlan 2 name ABC
.p
exit
w
http://www.ciscosim.net
Pass4sure---help you pass any IT exam http://www.pass4sure.com
F0/23
F0/23
SW1 SW2
SW1 and SW2 connect through F0/23. It requires that interface arrange automatically,
manually encapsulated as ISL Trunk.
SW1:
interface f0/23
switchport trunk encapsulation isl
m
switchport mode trunk
SW2:
co
interface f0/23
switchport trunk encapsulation isl
e.
switchport mode trunk
r
su
s4
as
.p
w
w
w
http://www.ciscosim.net
Pass4sure---help you pass any IT exam http://www.pass4sure.com
F0/23
F0/23
SW1 SW2
VTP domain is cisco。SW1 is VTP server。SW2 is VTP client。It requires that 5 VLANs be
configured on SW1.(see Lab 13),SW2 can auto-study these 5 VLANs。
SW1:
vlan database
m
vtp domain cisco
vtp server
vlan 2 name ABC
co
vlan 6 name cisco
vlan 11 name BB1
e.
vlan 12 name BB2
vlan 13 name BB3
exit r
su
!
interface f0/23
switchport trunk encapsulation isl
s4
SW2:
as
vlan database
vtp domain cisco
.p
vtp client
exit
w
!
interface f0/23
w
http://www.ciscosim.net
Pass4sure---help you pass any IT exam http://www.pass4sure.com
F0/23 F0/23
F0/24 F0/24
SW1 SW2
F0/23 of SW1 is connected to F0/23 of SW2;F0/24 of SW1 is connected to F0/24 of SW2. It
has to be configured as 2 ISL Trunk, and both bound as Ethernet-channel (Ethernet-channel
is also encapsulated as ISL Trunk).
m
SW1:
interface range f0/23 – 24
switchport trunk encapsulation isl
co
switchport mode trunk
channel-group 1 mode on
e.
!
interface port 1
switchport trunk encapsulation isl r
su
switchport mode trunk
SW2:
s4
channel-group 1 mode on
!
.p
interface port 1
switchport trunk encapsulation isl
w
http://www.ciscosim.net
Pass4sure---help you pass any IT exam http://www.pass4sure.com
E0
F0/1
E0 E0
R2 F0/2 SW1 F0/3 R3
m
IP of R2 E0 is 1.1.1.1/24, IP of R3 E0 is 2.2.2.2/24. F0/2 is in VLAN 1, and F0/3 is in VLAN.
Configure dot1q single route on R1.
co
R1:
e.
interface e0
ip address 1.1.1.254 255.255.255.0
! r
su
interface e0.2
ip address 2.2.2.254 255.255.255.0
encapsulation dot1q
s4
R2:
interface e0
as
R3:
interface e0
w
SW1:
vlan database
w
vlan 2
exit
!
interface f0/1
switchport trunk encapsulation dot1q
switchport mode trunk
!
interface f0/3
switchport access vlan 2
http://www.ciscosim.net
Pass4sure---help you pass any IT exam http://www.pass4sure.com
E0
R1 F0/1
SW1
IP of R1 E0 is 1.1.1.1/24, and IP of SW1 F0/1 is 1.1.1.2/24。
R1:
interface e0
ip address 1.1.1.1 255.255.255.0
m
SW1:
interface f0/1
co
no switchport
ip address 1.1.1.2 255.255.255.0
r e.
su
s4
as
.p
w
w
w
http://www.ciscosim.net