Beruflich Dokumente
Kultur Dokumente
FLANGE BOLTS, SCREWS & STUDS REQUIRED FOR VALVES BETWEEN #125 / #150 ANSI FLANGES.
All information herein is proprietary and confidential and may not be copied or
reproduced without the expressed written consent of DelTech Controls. INNOVATION by DESIGN.
Technical Data Sheet
BOLTS / STUDS / SCREWS SPECIFICATIONS
T.D.S NO :50/52-089-00
Issue Date: AUG 2007
Revision no: Revision Date:
Page 2 Of 3
FLANGE BOLTS, SCREWS & STUDS REQUIRED FOR VALVES BETWEEN #125/#150 ANSI FLANGES.
All information herein is proprietary and confidential and may not be copied
or reproduced without the expressed written consent of DelTech Controls.
INNOVATION by DESIGN.
Technical Data Sheet
BOLTS / STUDS / SCREWS SPECIFICATIONS
T.D.S NO :50/52-089-00
Issue Date: AUG 2007
Revision no: Revision Date:
Page 3 Of 3
FLANGE BOLTS, SCREWS & STUDS REQUIRED FOR VALVES BETWEEN #125/#150 ANSI FLANGES.
WAFER OR LUG VALVE USING STUD AND TWO HEX NUTS
Valve Size Diameter Length
Number Required
Inch Inch
2" (50) 5/8-11 5 4
2.5" (65) 5/8-11 5 1/4 4
3" (80) 5/8-11 5 1/2 4
4" (100) 5/8-11 5 3/4 8
5" (125) 3/4-10 6 1/4 8
6" (150) 3/4-10 6 1/4 8
8" (200) 3/4-10 7 8
10" (250) 7/8-9 7 1/4 12
12" (300) 7/8-9 7 3/4 12
14" (350) 1-8 8 1/2 12
16" (400) 1-8 9 1/2 16
18" (450) 1 1/8-7 10 1/4 16
20" (500) 1 1/8-7 11 1/4 20
24"(600) 1 1/4-7 13 20
All information herein is proprietary and confidential and may not be copied
or reproduced without the expressed written consent of DelTech Controls.
INNOVATION by DESIGN.