Sie sind auf Seite 1von 1

NX7

for Engineers and Designers

Book Description
NX 7 for Engineers and Designers textbook introduces readers
to NX 7, one of the world's leading parametric solid modeling
packages. In this textbook, the author emphasizes on the solid
modeling techniques that improve the productivity and
efficiency of the users. The chapters in this textbook are
structured in a pedagogical sequence that makes it very
effective in learning the features and capabilities of the
software. Following are the salient features of this textbook:
» Tutorial Approach: The author has adopted the tutorial
point-of-view with learn-by-doing approach throughout the
textbook. This approach guides the users through the
process of creating the models in the tutorials.
» Real-World Projects as Tutorials: The author has used about
60 real-world mechanical engineering projects as tutorials in
this book. This enables the readers to relate the tutorials in
the book to the mechanical engineering industry. In
addition, there are about 30 exercises that are also based on
the real-world mechanical engineering projects.
» Coverage of all Important Environments: This textbook
covers all important environments of NX, including the
Modeling, Assembly, and Drafting environment.
» Tips and Notes: Additional information is provided to the
users in the form of tips and notes.
» Learning Objectives: The first page of every chapter
summarizes the topics that will be covered in that chapter.
» Self-Evaluation Test, Review Questions, and Exercises:
Every chapter ends with a Self-Evaluation test so that the
users can assess their knowledge of the chapter. The
answers to the Self-Evaluation test are given at the end of
the chapter. Also, the Review Questions and Exercises are
ISBN: 978-93-5004-054-6 given at the end of each chapter and they can be used by the
Pages: 1704 | Price: Rs. 666/- w/CD instructors as test questions and exercises.
Author: Prof. Sham Tickoo

Table of Contents
Features Introduction | Drawing Sketches for Solid Models | Adding Geometric and Dimensional
Constraints to Sketches | Editing, Extruding, and Revolving Sketches | Working with Datum
» Part Modeling
Planes, Coordinate Systems,and Datum Axes | Advanced Modeling Tools-I | Advanced
» Assembly Design
Modeling Tools-II | Editing Features and Advanced Modeling Tools-III | Assembly Modeling-I |
» Surface Design
Assembly Modeling-II | Surface Modeling | Advanced Surface Modeling | Generating, Editing,
» Drafting
and Dimensioning the Drawing Views | Synchronous Modeling
» Synchronous Modeling

Published by:
DREAMTECH PRESS WILEY INDIA PVT. LTD. Distributed by:
19-A, Ansari Road, Daryaganj 4435-36/7, Ansari Road, Daryaganj
New Delhi-110 002, INDIA New Delhi-110 002, INDIA
Tel: +91-11-2324 3463-73, Fax: +91-11-2324 3078 Tel: +91-11-4363 0000, Fax: +91-11-2327 5895
Email: feedback@dreamtechpress.com Email: csupport@wiley.com
Website: www.dreamtechpress.com Website: www.wiley.com
Regional Offices: Bangalore: Tel: +91-80-2313 2383, Fax: +91-80-2312 4319, Email: blrsales@wiley.com
Mumbai: Tel: +91-22-2788 9263, 2788 9272, Telefax: +91-22-2788 9263, Email: mumsales@wiley.com
Dreamtech books are exclusively sold by Wiley India Pvt. Ltd.

Das könnte Ihnen auch gefallen