Beruflich Dokumente
Kultur Dokumente
16
LP: EE16502
Department of Electrical and Electronics Engineering
Rev. No: 00
B.E : Electrical & Electronics Engineering Regulatio: 2016 Date: 02-07-2018
PG Specialisation : Not Applicable
Sub. Code / Sub. Name : EE16502, Design of Electrical Apparatus
Unit : 1. Introduction
Objective: To determine rating of various types of electrical machines and study CAD
software.
Session Teaching
Topics to be covered Ref
No * Aids
1 Major considerations, Design factors 1,2,3 BB
Unit : 2. DC MACHINES
Unit Syllabus: Output Equations – Main Dimensions – Choice of Specific Electric and
Magnetic Loading – Magnetic Circuits Calculations - Carter’s Coefficient - Net length of Iron
–Real & Apparent flux densities – Selection of number of poles – Design of Armature –
Design of commutator and brushes.
Unit : 3. TRANSFORMERS
Unit Syllabus: Output Equations – Main Dimensions - KVA output for single and three phase
transformers – Window space factor – Design of core and winding – Overall dimensions –
Operating characteristics – No load current – Temperature rise – Design of Tank - Methods of
cooling.
27 Problems in output equations of single and three phase transformers. 1,2,3 BB/PPT
Window space factor, Design of core-Net core area, grass core area
28 1,2,3 BB/PPT
for Square and Stepped cores.
29 Problems in design of Transformer Core 1,2,3 BB/PPT
Unit Syllabus: Output equation of Induction motor – Main dimensions – Length of air gap-
Rules for selecting rotor slots of squirrel cage machines – Design of rotor bars & slots –
Design of end rings – Design of wound rotor – Magnetic leakage calculations – Leakage
reactance of polyphase machines- Magnetizing current - Short circuit current – Operating
characteristics- Losses and Efficiency.
Session Teaching
Topics to be covered Ref
No * Aids
Output equation of Induction motor, Main dimensions (separation of
37 1,2,3 BB/PPT
D and L for various design features), Net iron length
38 Problems in output equation of three phase induction motor. 1,2,3 BB/PPT
No of stator slots, Stator turns/phase, Stator conductor area,
39 1,2,3 BB/PPT
conductor/stator slot, Area of stator slots, Length of mean turn,
Width of stator tooth,
40 Problems in Main dimensions and Stator design 1,2,3 BB/PPT
45 Design of wound rotor, Problems based on Slip ring rotor design 1,2,3 BB/PPT
Leakage reactance calculation, Magnetizing current and short circuit
46 1,2,3 BB/PPT
current calculations
47 Losses and efficiency, Dispersion co-efficient-Problems 1,2,3 BB/PPT
48 Design problems in three phase squirrel cage induction motor 1,2,3 BB/PPT
Content beyond syllabus covered (if any):
Unit Syllabus: Output equations – Design of salient pole machines – Short circuit ratio –
shape of pole face – Armature design – Armature parameters – Estimation of air gap length –
Design of rotor – Design of damper winding – Determination of full load field MMF – Design
of field winding – Design of turbo alternators – Rotor design.
57 Determination of full load field MMF, Design of Field winding 1,2,3 BB/PPT
TEXT BOOKS: 1. Sawhney, A.K., 'A Course in Electrical Machine Design', Dhanpat Rai &
Sons, New Delhi, 2010.
REFERENCES:
5. Sen, S.K., 'Principles of Electrical Machine Designs with Computer Programmes', Oxford
and IBH Publishing Co. Pvt. Ltd., New Delhi, 2006.
Prepared by Approved by
Signature
Dr.Nalin Kant Mohanty, Mr.G.Vinoth kumar
Name Dr.KR.Santha
Remarks *:
* If the same lesson plan is followed in the subsequent semester/year it should be mentioned
and signed by the Faculty and the HOD