Beruflich Dokumente
Kultur Dokumente
P-SERIES
Pressure Gauges
2
www.pinter-gmbh.com
3
CONTENT
www.pinter-gmbh.com
4
DEFINITION OF PRESSURE
A force applied uniformly over a certain area is
called pressure:
p=F/A
∆P = P1 - P2
www.pinter-gmbh.com
5
www.pinter-gmbh.com
6
Description
Bourdon-tube pressure gauge model P1 vacuum, low pressu-
re, pressure and high pressure applications with aggressi-
ve, gasous and liquid, non-crystallizing and not highly viscous
media.
Operating Principle
P1 pressure gauges are pressure instruments with a
bourdon-tube measuring element, made of stainless steel.
www.pinter-gmbh.com
7
High pressure ranges 0 - 60 bar; 0 - 100 bar; 0 - 160 bar; 0 - 250 bar; 0 - 400 bar; 0 - 600 bar
Vacuum ranges -1...0 bar; -1...+0,6 bar; -1...+1,5 bar; -1...+3 bar; -1...+5 bar; -1...+9 bar; -1...+15 bar
Accuracy (EN 837) class 1.6 (dial 63) ; class 1.0 (dial 100 / 160)
Further Options
throttle screw
Accessories
connection accessories, e.g. shut-off valve see catalogue„Accessories“
www.pinter-gmbh.com
8
DIMENSIONAL DRAWINGS
Bottom connection Bottom connection Bottom connection, Bottom connection,
dial 63 dial 100/60 rear flange dial 63 rear flange dial 100/160
measurement table
NG a a1 b b1 b2 b3 ∅c c1 c2 d1 d2 d3 d4 d5 d6 D e G g g1 h m n
63 9,5 13 30,5 34 5 2 13 75 85 3,6 64 68 G1/4B 56 53 94 82
100 15,5 19 49 52,5 49 49 6 3 20 116 132 4,8 104 107 101 34,5 G1/2B 83 83 86
160 17,5 20,5 50 53 50 50 6 3 20 178 196 5,8 164 167 161 34,5 G1/2B 84 86 116
NG s s1 s2 s3 s4 SW
63 7 5,5 2 14
100 5,5 4 2 4 22
160 6 4 2 4,5 22
www.pinter-gmbh.com
9
ORDER CODES
(most common options)
order code P 1 x x x x - x - x x x x
brass 1
Material stainless steel (dial 63) 2
(wetted parts) stainless steel (dial 100/160) 3
stainless steel (O2 service)) 5
63 3
Dial size 100 5
160 6
stainless steel 3
stainless steel, front flange 6
Enclosure
stainless steel, bracket mounting 7
stainless steel, rear flange 9
Windows safety laminated glass C
-1...0 bar 006
-1...+9 bar 143
-1...+15 bar 146
0 - 1 bar 020
0 - 1,6 bar 022
0 - 2,5 bar 023
0 - 4 bar 024
0 - 6 bar 025
Pressure range 0 - 10 bar 026
0 - 16 bar 027
0 - 25 bar 028
0 - 40 bar 029
0 - 60 bar 030
0 - 100 bar 031
0 - 160 bar 032
0 - 250 bar 033
0 - 400 bar 035
without A
Damping glycerin filled D
damped axis C
class 1.6 (dial 63) A
Accuracy
class 1.0 (dial 100/160) B
G 1/4 B bottom, brass A
G 1/4 B bottom, stainless steel B
G 1/2 B bottom, brass C
G 1/2 B bottom, stainless steel D
Process connection
G 1/4 B back, brass H
G 1/4 B back, stainless steel I
G 1/2 B back, brass J
G 1/2 B back, stainless steel K
without further options O
dual-scale bar / psi I
further options
dual-scale bar / kPa AU
further options in text #
www.pinter-gmbh.com
10
Description
Bourdon-tube pressure gauge model P1 vacuum, low pressu-
re, pressure and high pressure applications with aggressi-
ve, gasous and liquid, non-crystallizing and not highly viscous
media.
Operating Principle
P1 pressure gauges are pressure instruments with a
bourdon-tube measuring element, made of stainless steel.
www.pinter-gmbh.com
11
High pressure ranges 0 - 60 bar; 0 - 100 bar; 0 - 160 bar; 0 - 250 bar; 0 - 400 bar; 0 - 600 bar
Vacuum ranges -1...0 bar; -1...+0,6 bar; -1...+1,5 bar; -1...+3 bar; -1...+5 bar; -1...+9 bar; -1...+15 bar
Further Options
throttle screw
www.pinter-gmbh.com
12
DIMENSIONAL DRAWINGS
Bottom connection Back connection
dial 100 dial 100
measurement table
NG a a1 b b1 ∅c c1 c2 d1 d2 d3 D e G g h k m n s s1 SW
100 15,5 19 87 90,5 6 3 20 116 132 4,8 101,5 34,5 G1/2B 121 86 40 92 72 6 2 22
www.pinter-gmbh.com
13
ORDER CODES
(most common options)
order code P 5 x x x D - x - A B D x
Material stainless steel (dial 100/160) 3
(wetted parts) stainless steel (O2 service)) 5
NG 100 5
Dial size
NG 160 6
stainless steel 3
Enclosure
stainless steel, rear flange 9
-1...0 bar (not with contacts MK) 006
-1...+9 bar 143
-1...+15 bar 146
0 - 1 bar (not with contacts MK) 020
0 - 1,6 bar (not with contacts MK) 022
0 - 2,5 bar 023
0 - 4 bar 024
0 - 6 bar 025
Pressure range 0 - 10 bar 026
0 - 16 bar 027
0 - 25 bar 028
0 - 40 bar 029
0 - 60 bar 030
0 - 100 bar 031
0 - 160 bar 032
0 - 250 bar 033
0 - 400 bar 035
1x MK K
2x MK L
Contact(s)
1x IN Q
2x IN R
www.pinter-gmbh.com
14
Description
Bourdon-tube pressure gauge model P1 vacuum, low pressu-
re, pressure and high pressure applications with aggressi-
ve, gasous and liquid, non-crystallizing and not highly viscous
media.
Operating Principle
P1 pressure gauges are pressure instruments with a
bourdon-tube measuring element, made of stainless steel.
www.pinter-gmbh.com
15
High pressure ranges 0 - 60 bar; 0 - 100 bar; 0 - 160 bar; 0 - 250 bar; 0 - 400 bar
Vacuum ranges -1...0 bar; -1...+0,6 bar; -1...+1,5 bar; -1...+3 bar; -1...+5 bar; -1...+9 bar; -1...+15 bar
Material enclosure stainless steel 1.4301 (AISI 304) with pressure relief
Further Options
throttle screw
www.pinter-gmbh.com
16
DIMENSIONAL DRAWINGS
Bottom connection
www.pinter-gmbh.com
17
ORDER CODES
(most common options)
order code P 4 3 5 3 C - x - x B x x
-1...0 bar 006
-1...+9 bar 143
-1...+15 bar 146
0 - 1 bar 020
0 - 1,6 bar 022
0 - 2,5 bar 023
0 - 4 bar 024
0 - 6 bar 025
Pressure range 0 - 10 bar 026
0 - 16 bar 027
0 - 25 bar 028
0 - 40 bar 029
0 - 60 bar 030
0 - 100 bar 031
0 - 160 bar 032
0 - 250 bar 033
0 - 400 bar 035
without A
Damping
parafine oil B
1/2“ BSP male bottom, stainless steel D
Process connection
1/2“ BSP male back, stainless steel K
4 - 20 mA A
Output signal
0 - 10 V B
www.pinter-gmbh.com
18
Description
Capsule pressure gauge model P2 for vacuum and low pres-
sure applications with aggressive, gasous dry media.
Operating Principle
P2 pressure gauges are pressure instruments with a cap-
sule measuring element, made of stainless steel.
www.pinter-gmbh.com
19
Further Options
throttle screw
www.pinter-gmbh.com
20
DIMENSIONAL DRAWINGS
Bottom connection Bottom connection Bottom connection, Bottom connection,
dial 63 dial 100/60 rear flange dial 63 rear flange dial 100/160
measurement table
NG a a1 b b1 b2 b3 ∅c c1 c2 d1 d2 d3 d4 d5 d6 D e G g g1 h m n
63 9,5 13 30,5 34 5 2 13 75 85 3,6 64 68 G1/4B 56 53 94 82
100 15,5 19 49 52,5 49 49 6 3 20 116 132 4,8 104 107 101 34,5 G1/2B 83 83 86
160 17,5 20,5 50 53 50 50 6 3 20 178 196 5,8 164 167 161 34,5 G1/2B 84 86 116
NG s s1 s2 s3 s4 SW
63 7 5,5 2 14
100 5,5 4 2 4 22
160 6 4 2 4,5 22
www.pinter-gmbh.com
21
ORDER CODES
(most common options)
order code P 2 x x x x - x - A x x x
stainless steel (dial 63) 2
Material
stainless steel (dial 100/160) 3
(wetted parts)
stainless steel (O2 service)) 5
NG 63 3
Dial size NG 100 5
NG 160 6
stainless steel 3
stainless steel, front flange 6
Enclosure
stainless steel, bracket mounting 7
stainless steel, rear flange 9
Window safety laminated glass C
-600...0 mbar 105
-400...0 mbar 004
-250...0 mbar 003
-160...0 mbar 002
-100...0 mbar 001
-60...0 mbar 000
-40...0 mbar 00E
-25...0 mbar 00D
Pressure range
0 - 25 mbar 00I
0 - 40 mbar 00J
0 - 60 mbar 010
0 - 100 mbar 011
0 - 160 mbar 012
0 - 250 mbar 013
0 - 400 mbar 014
0 - 600 mbar 015
class 1.6 A
Accuracy
class 1.0 (dial 100/160) B
1/2“ BSP male bottom, stainless steel D
Process connection
1/2“ BSP male back, stainless steel K
without further options O
dual-scale bar / psi I
further options
dual-scale bar / kPa AU
further options in text #
www.pinter-gmbh.com
22
Description
Diaphragm pressure gauge model P3 for low pressure and
normal pressure applications with aggressive, gasous, high-
ly viscous not chrystallizing media.
Operating Principle
P3 pressure gauges are pressure instruments with a dia-
phragm measuring element, made of stainless steel or Du-
ratherm.
www.pinter-gmbh.com
23
Pressure ranges 0 - 1 bar; 0 - 1,6 bar; 0 - 2,5 bar; 0 - 4 bar; 0 - 6 bar; 0 - 10 bar; 0 - 16 bar; 0 - 25 bar
Material enclosure stainless steel 1.4301 (AISI 304) with pressure relief
Material diaphragm Duratherm (flange ∅100) / stainless steel 1.4571 (AISI 316Ti) (flange ∅160)
Further Options
throttle screw
www.pinter-gmbh.com
24
DIMENSIONAL DRAWINGS
bottom connection bottom connection
flange ∅100 flange ∅160
measurement table
NG a b ∅c c1 c2 d1 d2 d3 d4 d5 d6 d7 d8 D D1 DN DN1 G G1 h h1 h2 h3 h4 s s1 s2 s3 s4 s5 s6 s7 t SW
100 20 55 6 3 20 68 85 115 102 125 165 4x18 4x14 100 160 25 50 G1/2B 4xM12 127 111 101 129 137 2 30 3 20 18 48 20 56 12 22
160 20 55 6 3 20 68 85 115 102 125 165 4x18 4x14 100 160 25 50 G1/2B 4xM12 156 141 131 159 167 2 30 3 20 18 48 20 56 12 22
www.pinter-gmbh.com
25
ORDER CODES
(most common options)
order code P 3 x x 3 C - x - A A x x
stainless steel (flange ∅160) 2
Material
(wetted parts) stainless steel , Duratherm
8
(flange ∅100)
NG 100 5
Dial size
NG 160 6
-1...0 bar 006
-1...+9 bar 143
-1...+15 bar 146
0 - 1 bar 020
0 - 1,6 bar 022
0 - 2,5 bar 023
0 - 4 bar 024
0 - 6 bar 025
Pressure range 0 - 10 bar 026
0 - 16 bar 027
0 - 25 bar 028
0 - 40 bar 029
0 - 60 bar 030
0 - 100 bar 031
0 - 160 bar 032
0 - 250 bar 033
0 - 400 bar 035
Process connection 1/2“ BSP male bottom, stainless steel D
without further options O
dual-scale bar / psi I
further options
dual-scale bar / kPa AU
further options in text #
www.pinter-gmbh.com
26
www.pinter-gmbh.com
27
www.pinter-gmbh.com
All given information and/or technical data in this document have been
prepared very carefully and reflect the state of the art when printed. Infor-
mation and/or technical data may change without prior notice.
All given information and/or technical data in this document are not bin-
CATALOGUE.MANOMETER.14R1.EN
ding and for information purposes only. Binding information and/or techni-
cal data can be obtained from our quotations and/or order confirmations.
PINTER Mess- und Regeltechnik GmbH Please understand that we cannot be held responsible for the correct-
ness of any given information and/or technical data in this document.
Kraichgaublick 17
Technologiepark Neckartal-Odenwald When installing or maintaining PINTER products always refer to the cor-
responding operating manual and technical data sheet.
74847 Obrigheim, Germany
All mentioned product names, product designations, product descriptions
and logos are trademarks and property of their respective owners.
Phone +49-6262-92670-0 CHEMSEAL, DIMIO, INDUSENS, INDUSWITCH, INTELLICOMB, MA-
Fax +49-6262-92670-99 NOCOMB, MINICOMB are trademarks and/or registered trademarks of
the PINTER Mess- und Regeltechnik GmbH and/or their affiliated com-
E-Mail info@pinter-gmbh.de panies in Germany, the European Union, Switzerland and/or other coun-
Internet www.pinter-gmbh.com tries. The use of PINTER trademarks is prohibited if not clearly agreed
otherwise.