Beruflich Dokumente
Kultur Dokumente
TABLE OF CONTENTS
CE declaration. 1
Type description. 2
Measurements of grab. 3
Bearings + bearing sealing. 4
Hoisting Bobcat 5
Drawings of construction. 6
Materials. 7
Reeving of closing ropes. 8
Instructions of lubrication. 9
General checklist. 10
Remove + mounting shafts. 11
Repair welding. 12
Appendix.
Nieuwegein, 26-10-2016.
EC- Declaration of conformity for machinery
(Directive 2006/42/EEC, Annex II, sub A)
By adjustment of the grab without our legal permission this EC- declaration will loose
it’s validity.
General Manager
page nr. 2
CRANE Manufacture :
Capacity : 45.0. T
Angle of repose : -°
Sealing : CD 140.
Pulley : SL04-5026 PP
GRAB
MATERIALS (7)
Verstegen grabs are made of first choice materials that will be delivered with a certificate
according to DIN 50049-3.1.B.
MATERIALS: 15crni6g
42crmo4v
c45
cusn 11-13
h450
S235JR
S355J2+N
S355J2H
S355JO
w700e
Internet Certificaat
Internet Certificate
CERTIFICAAT STAALKABELS
Certificate of Wire Ropes
Ondergetekende verklaart namens zijn firma, dat onderstaande gegevens juist zijn en dat de omschreven staalkabel of het staalkabel
samenstel overeenkomen met de bepalingen van de EG Machine Richtlijn 2006/42/EG, bijlage II-A. Het samenstellen en het onderzoek en
de beproeving is uitgevoerd door een bevoegd persoon onder zijn toezicht, volgens de EKH-Werkvoorschriften.
The undersigned certifies on behalf of his company, that below particulars are correct and that the described wire rope or complete
gear are according to the regulations of the EG Machinery Directive 2006/42/EG, appendix II-A. The assembling, examination and test
was carried out under his supervision by a competent person, according to the EKH-Code of practice.
Werklast in kg (WLL) : kg
Working load limit
Omschrijving : Verz staalkabel 36 mm
Description
Afwerking van kabeleinden : e/z nemag peer no.14 gegot. a/z trekoog gelast
Confectioning of rope ends
Overige gebruikte onderdelen samenstel : ;
Other used parts of complete gear ;
Afmetingen Nominale kabelmiddellijn : 36 mm
Dimensions Nominal wire rope diameter
Lengte van geleverde staalkabel : 21,75 mtr
Length of supplied wire rope
Constructie Aantal strengen x aantal draden + kernen : 6 X 36 WS + STK.
Construction Number of strands x number of wires + cores
Slagrichting en slagwijze : kruisslag rechts
Direction and type of lay
Voorgevormd : Ja
Preformed
Materiaal Treksterkteklasse : 1960/1770 N/mm²
Material Tensile grade
Afwerking van draadoppervlak : Verzinkt
Surface finishing of wires
Sterkte Minimum breekkracht van kabel in kN (BL) : 904
Strength Minimum breaking strength of wire rope
Proefbelasting bij trekproef in kN (PL) : kN
Proofload applied
Datum van beproeving : 14-09-2016
Date of test
Toepassing :
Application
Staalkabel vervaardigd volgens norm :
Wire rope manufactured according standard
Kenmerk/Fabrieks/haspelnummer :
Identification/Production number/Reel number
Naam en adres fabrikant : MENNENS B.V.
Name and adres of manufacturer
Leveringsdatum Naam en adres van leverancier Gegevens betreffende levering Handtekening gemachtigde
Date of delivery Name and adres of supplier Note of delivery Signature of authorised person
CERTIFICAAT STAALKABELS
Certificate of Wire Ropes
Ondergetekende verklaart namens zijn firma, dat onderstaande gegevens juist zijn en dat de omschreven staalkabel of het staalkabel
samenstel overeenkomen met de bepalingen van de EG Machine Richtlijn 2006/42/EG, bijlage II-A. Het samenstellen en het onderzoek en
de beproeving is uitgevoerd door een bevoegd persoon onder zijn toezicht, volgens de EKH-Werkvoorschriften.
The undersigned certifies on behalf of his company, that below particulars are correct and that the described wire rope or complete
gear are according to the regulations of the EG Machinery Directive 2006/42/EG, appendix II-A. The assembling, examination and test
was carried out under his supervision by a competent person, according to the EKH-Code of practice.
Werklast in kg (WLL) : kg
Working load limit
Omschrijving : Verz staalkabel 36 mm
Description
Afwerking van kabeleinden : e/z nemag peer no.14 gegot. a/z trekoog gelast
Confectioning of rope ends
Overige gebruikte onderdelen samenstel : ;
Other used parts of complete gear ;
Afmetingen Nominale kabelmiddellijn : 36 mm
Dimensions Nominal wire rope diameter
Lengte van geleverde staalkabel : 21,75 mtr
Length of supplied wire rope
Constructie Aantal strengen x aantal draden + kernen : 6 X 36 WS + STK.
Construction Number of strands x number of wires + cores
Slagrichting en slagwijze : kruisslag links
Direction and type of lay
Voorgevormd : Ja
Preformed
Materiaal Treksterkteklasse : 1960/1770 N/mm²
Material Tensile grade
Afwerking van draadoppervlak : Verzinkt
Surface finishing of wires
Sterkte Minimum breekkracht van kabel in kN (BL) : 904
Strength Minimum breaking strength of wire rope
Proefbelasting bij trekproef in kN (PL) : kN
Proofload applied
Datum van beproeving : 14-09-2016
Date of test
Toepassing :
Application
Staalkabel vervaardigd volgens norm :
Wire rope manufactured according standard
Kenmerk/Fabrieks/haspelnummer :
Identification/Production number/Reel number
Naam en adres fabrikant : MENNENS B.V.
Name and adres of manufacturer
Leveringsdatum Naam en adres van leverancier Gegevens betreffende levering Handtekening gemachtigde
Date of delivery Name and adres of supplier Note of delivery Signature of authorised person
CERTIFICAAT HIJSMIDDELEN
Certificate of Hoisting Equipment
Ondergetekende verklaart namens zijn firma, dat onderstaande gegevens juist zijn en dat het omschreven hijsmiddel en alle gebruikte
onderdelen overeenkomen met de bepalingen van de EG Machine Richtlijn 2006/42/EG, bijlage II-A. Het samenstellen, het onderzoek en
de beproeving is uitgevoerd door een bevoegd persoon onder zijn toezicht, volgens de EKH-Werkvoorschriften.
The undersigned certifies on behalf of his company, that below particulars are correct and that the described hoisting equipment and all the
used parts are according to the regulations of the EG Machinery Directive 2006/42/EG, appendix II-A. The assembling, examination and test
was carried out under his supervision by a competent person, according to the EKH-Code of practice.
Gebruiksfactor : 6
Coefficient of utilization
Toepassing :
Application
Kenmerk/Fabrieksnummer :
Identification/Production number
Leveringsdatum Naam en adres van leverancier Gegevens betreffende levering Handtekening gemachtigde
Date of delivery Name and adres of supplier Note of delivery Signature of authorised person
CERTIFICAAT HIJSMIDDELEN
Certificate of Hoisting Equipment
Ondergetekende verklaart namens zijn firma, dat onderstaande gegevens juist zijn en dat het omschreven hijsmiddel en alle gebruikte
onderdelen overeenkomen met de bepalingen van de EG Machine Richtlijn 2006/42/EG, bijlage II-A. Het samenstellen, het onderzoek en
de beproeving is uitgevoerd door een bevoegd persoon onder zijn toezicht, volgens de EKH-Werkvoorschriften.
The undersigned certifies on behalf of his company, that below particulars are correct and that the described hoisting equipment and all the
used parts are according to the regulations of the EG Machinery Directive 2006/42/EG, appendix II-A. The assembling, examination and test
was carried out under his supervision by a competent person, according to the EKH-Code of practice.
Gebruiksfactor : 6
Coefficient of utilization
Toepassing :
Application
Kenmerk/Fabrieksnummer :
Identification/Production number
Leveringsdatum Naam en adres van leverancier Gegevens betreffende levering Handtekening gemachtigde
Date of delivery Name and adres of supplier Note of delivery Signature of authorised person
-
U mm
21-05- 2012
page nr. 6
o
o
ig 1-2
C R
U U R N
D 28-06-2012
R C N
@ R CL ( 1- -2) _6_
page nr. 7
Regular lubrication is extremely important for the duration and the correct operation of
the grab.
FREQUENCY OF LUBRICATION:
when first using and after installing a new bearing the frequency of lubrication for the
first week will be:
if the grab has not been used for more than two weeks: lubricate throughout.
ADVICE OF LUBRICATION:
Shell Alvania WR.
or equivalent.
WEEKLY:
Functioning of the grab.
Check for damage.
“D” shackles of the suspension.
Wear of rope guide roller/pot.
Attachment of the shafts.
Closing rope and attachment.
Lubrication.
MONTHLY:
Welding points.
Wear of knives and scoop plates.
Bearing movement.
Sealing of the knives.
page nr. 9
If these shafts are provided with a pulling hole M16 or M24 they can be extracted from
one side only.
FIG 2-0
Materials:
Hardox 450 to Hardox 450
Hardox 450 to Weldox 700
Hardox 450 to S235***
Hardox 450 to S355***
Weldox 700 to S235***
Weldox 700 to S355***
S355*** to S355***
S355*** to S235***
S355*** to SKF 280
S235*** to S235***
---End of partlist---
27-10-2016
Drawing nr:: OH006278 Page 1
---End of partlist---
27-10-2016
Drawing nr:: OS001120 Page 1
---End of partlist---
27-10-2016
Drawing nr:: RS00923 Page 1
---End of partlist---
27-10-2016
Drawing nr:: K009317 Page 1
---End of partlist---
27-10-2016
Drawing nr:: EU001134 Page 1
---End of partlist---
27-10-2016
Drawing nr:: OB009305 Page 1
---End of partlist---
27-10-2016
Drawing nr:: B088127 Page 1
---End of partlist---
27-10-2016
Drawing nr:: A088120 Page 1
---End of partlist---
27-10-2016
Drawing nr:: A088121 Page 1
---End of partlist---
27-10-2016
Drawing nr:: CS001013 Page 1
---End of partlist---
27-10-2016