Beruflich Dokumente
Kultur Dokumente
03-05-02
Our Vision
To achieve excellence in our endeavors
and make a difference in the industry
through our contributions.
Our Mission
To provide our customers the highest
standards of quality and service, through
teamwork and personal dedication, above
and beyond their expectations. Pete Hoffmann – Vice President
Page 1 of 2
FLUID SYSTEMS, INC. (FSI) began
operations in early 1979 doing
developmental and engineering work
on solids control equipment and mud
Handling systems used on drilling rigs.
FSI’s Corporate Charter was issued on June 16, 1981.
The company has been involved in furthering solids control technology for the
oil industry since its inception. The first equipment introduced by the company was
a line of mud cleaners (hydrocyclones mounted over vibratory screening
equipment) which incorporated the use of linear motion in their design. In the early
1980’s, FSI was one of the first companies to introduce Linear Motion Shakers,
which have become the principal type of shakers in use on drilling rigs and in many
other applications today. FSI also developed a line of pretensioned screen panels,
which give superior life, are resistant to wear and allow for the fastest ‘screen
change’ of any machine in operation at this time.
Another area where the company has done a substantial amount of pioneering
work is in "Zero Discharge" Project’s in environmentally sensitive areas. The
development work accomplished in this area has led to improved systems as well
as cost reductions in the "Closed Loop" drilling environment. This work, to allow
drilling without reserve pits, was done before some of the present environmental
rules and regulations came into existence in the petroleum industry.
Page 2 of 2
Fluid Systems, Inc. has been producing high
quality screening equipment since 1979. With
hundreds of units in operation throughout
the world, we have an excellent reputation
for quality, reliability, simplicity and service.
Our in-house engineers will customize our
screening equipment to fit your needs at
little to no cost. Fluid Systems’
knowledgeable sales staff and dedicated
researchers are constantly working with
customers to develop products that will meet the needs of a global
marketplace.
Applications Questionnaire
Series 2L D18 Series 20L ACMF Series 20L CL
Linear Power Shaker Linear Power Shaker Linear Power Shaker
Page 1 of 3
Series 500 P2CS Series 500 P2CL Series 500 BHS
Linear Shaker Linear Shaker Linear Power Shaker
Page 2 of 3
Series 500B102DHC Series 3642B DFL
Double Header Mud Cleaner Linear Power
Double Feed Shaker
www.fsishakers.com
CUSTOMER__________________________________________________________________________________
ADDRESS___________________________________________________ E-MAIL_________________________
INDIVIDUAL________________________________PHONE______________________FAX________________
I. MATERIAL CHARACTERISTICS
A. Name of the material :________________________________________________________________
B. Feed rate :_________________________ STPH./Hr. ___________________________GPM of Slurry
C. Material is: Dry Wet
D. Temperature of feed : __________________ºF.
E. Bulk Density (loosely packed) : ________________Lbs./Cu. Ft. – Specific gravity of Mtl__________
F. Free moisture ________% Combined moisture (if any) _______% Percent solids of slurry_______%
G. Is the feed material
Abrasive? . . . . . . . . Yes No Free Flowing ? . . . . . . . Yes No
Hygroscopic ? . . . . . Yes No Corrosive ? . . . . . . . . . . Yes No
Sticky ? . . . . . . . . . . .Yes No ( If “ Yes”, pH ________________)
G. Is static a problem in handling the material ? Yes No
H. Particle Description:
Spherical . . . . . . Flaky . . . . . . . . Crystalline . . . . . . .
Granular . . . . . . Fiber . . . . . . . . Elongated . . . . . . .
Other__________________________________________________________________________
www.fsishakers.com
G Are floor space or head room limitations a consideration? yes No if “yes” list specs below
H Is non-standard positioning of inlet and/or outlets required? yes No if “yes” list specs below
Size ____________________________________Capacity_______________________________
V. OTHER INFORMATION
Signed _________________________________Date
2808 Engineers Road • Belle Chasse, LA 70037 USA • 504.393.1804 • 504.393.5166 FAX
sales@fsishakers.com
Fluid Systems, Inc. has been producing high
quality solids control and screening
equipment since 1979. With hundreds of units
in operation throughout the world, we have
an excellent reputation for quality,
reliability, simplicity and service. Our in-
house engineers will customize our
screening equipment to fit your needs at
little to no cost. Fluid Systems’
knowledgeable sales staff and dedicated
researchers are constantly working with customers to develop
products that will meet the needs of a global marketplace.
Page 1 of 2
Series 50/500 B Series 500/500 B Series 500/500 EOL
Linear Power Cascade Unit Linear Power Cascade Unit Elliptical Over Linear
Power Cascade
Page 2 of 2
Series 5000 gMAX™ eLIMINATOR™ Series 20L DSR2H-10 Series 20L SSR10HIL-14
Linear Power Mud Cleaner Linear Power Mud Cleaner Linear Power Mud Cleaner
Page 1 of 1
4” High Volume Desilter Cones 16 Cone Header
• Control mud weight by
removing silt-sized solids in
un-weighted systems
SSR Desilter
Hydrocyclone
The Fluid Systems, Inc. desilter units are
the result of an intensive research and
development program initiated in 1950.
Designed by Krebs Engineers, each
hydrocyclone represents a product of
advanced design, careful engineering,
quality materials and finest
workmanship. The interdependence of
inlet, vortex and apex orifices are of
prime importance to top performance,
and for that reason, Krebs Cyclones are
designed for easy interchangeability of
a wide range of orifice sizes to assure
superior results. The material of
construction in Krebs Hydrolcyclones
are a key to important economies.
Manifold
Each hydrocyclone is attached to its
manifold with a 2" [5.04cm] victaulic
inlet and outlet. A 0 to 60 psi [4.2 kg/
cm²]pressure gauge measures the inlet
Technical Data pressure for proper operation. This
manifold is mounted on an oilfield type
skid with a solids discharge trough
Series: SSR
feeding into an outlet.
# of cones available: 1 to 24 per header
Inlet size: Size depending on number of cones
Outlet size: Size depending on number of cones The FSI Difference
Overall dimensions: Size depending on number of cones
Cone capacities: 100 GPM Each [378.50 lpm] @ 40 psi
• Simple design
[2.8kg/cm2] • Rugged and reliable
Cone construction: High durameter cast polyurethane • High Performance
• Low maintenance
• Small footprint
• High volume
hydrocyclones
• Roughneck friendly
General Specifications
Series DSR
Inlet size: Size will change depending on number of cones selected
Outlet size: Size will change depending on number of cones selected
Overall Dimensions: Size will change depending on number of cones selected
Cone capacities: 500 GPM [1892.70 lpm] per cone
Cone construction: High durameter cast polyurethane Printable Version
No. of cones available: 1 to 4 per header
Home < > Print Exit
DSR Desander
Hydrocyclone
The Fluid Systems, Inc. desander units
are the result of an intensive research
and development program initiated in
1950. Designed by Krebs Engineers,
each hydrocyclone represents a
product of advanced design, careful
engineering, quality materials and finest
workmanship. The interdependence of
inlet, vortex and apex orifices are of
prime importance to top performance,
and for that reason, Krebs Cyclones are
designed for easy interchangeability of
a wide range of orifice sizes to assure
superior results. The material of
construction in Krebs Hydrolcyclones
are a key to important economies.
Manifold
Each hydrocyclone is attached to an 8"
[20.3 cm] manifold with a 4" [10.2 cm]
victaulic inlet andoutlet. A 0 to 60 psi
Technical Data [4.2 kg/cm²]pressure gauge measures
the inlet pressure for proper operation.
This manifold is mounted on an oilfield
Series: DSR type skid with a solids discharge trough
# of cones available: 1 to 4 per header feeding into a 8’ [20.3 cm] outlet.
Inlet size: Size depending on number of cones
Outlet size: Size depending on number of cones The FSI Difference
Overall dimensions: Size depending on number of cones
Cone capacities: 500 GPM [1892.70 lpm] per cone
• Simple design
Cone construction: High durameter cast polyurethane • Rugged and reliable
• High Performance
• Low maintenance
• Small footprint
• High volume
hydrocyclones
• Roughneck friendly
Page 1 of 1
FSI Centrifugal Pumps
The Fluid Systems, Inc. centrifugal pump units are designed to charge
desanders, desilters, mud mixing operations, super charging and
fresh water transfer. Careful selection and installation of the correct
FSI centrifugal pump will result in a unit that will provide long lasting
and dependable service.
Pump Selection
To insure proper pump selection, the following information is
required:
The FSI Difference
• Simple Design 1. Type of operation to be performed (We recommend only one pump
• Rugged and Reliable for one operation).
• High Performance 2. Amount of head and volume required for the operation.
• Low maintenance
3. Type of driver desired (electric or engine).
4. Specific gravity or weight of fluid to be handled.
5. Total head loss due to friction plus the total net lift above the mud
level suction is taken from. (We may be of assistance in calculating
this requirement if you have the specific information.)
Printable Version
Home < Print Exit
Centrifugal Pumps
FSI Centrifugal Pumps
The Fluid Systems, Inc. centrifugal pump units
are designed to charge desanders, desilters,
mud mixing operations, super charging and
fresh water transfer. Careful selection and
installaion of the correct FSI centrifugal pump
will result in a unit that will probide long last-
ing and dependable service.
Pump selection
To insure proper pump selection, the
following information is required:
1. Type of operation to be performed. (We
recommend only one pump for one
operation).
2. Amount of head and volume required for
the operation.
3. Type of driver desired (electric or engine).
4. Specific gravity or weight of fluid to be
DIM SCHEDULE 40HP 50HP 60HP 75HP COMMENT handled.
A 72 72 72 72 OVERALL LENGTH 5. Total head loss due to friction plus the
B 30.75 30.75 30.75 30.75 OVERALL WIDTH
C 24 24 27.25 27.25 OVERALL HEIGHT total net lift above the mud level suction
D 13 13 13 13 INLET HEIGHT is taken from. (We may be of assistance
E 13.625 13.625 15 15 in calculating this requirement if you have
F 16.5 16.5 16.5 16.5 PUMP MOUNT
G 20.078 20.078 18.953 18.953 the specific information.)
H 10.5 12 11.25 12.25 MOTOR MOUNT
J 11.297 9.797 10.297 9.297
K 12 12 12 12
L 3 3 3 3
M 1 1 0 0
N 5.75 5.75 6.25 6.25
O 6 6 8.375 8.375
P 11 11 14.25 14.25
Q 9 9 9 9
R 4 4 4 4
S 8 8 9 9
T 36.75 36.75 37.875 37.875 PUMP LENGTH
U 27.75 27.75 28.75 28.75 MOTOR LENGTH
V 0.328 29.25 0.328 0.328 SHAFT CLEARANCE
W 64.828 64.828 66.953 66.953 PUMP MOTOR
X 11 66.328 12.375 12.375
Y 2.625 2.625 2.625 2.625
Z 5.095 5.095 2.422 2.422
AA 12.5 3.047 14 14 MOTOR MOUNT
BB 7 7 7 7 PUMP MOUNT
CC 0.6875 0.6875 0.6875 0.6875 MOTOR BOLTS
Exceptional reliability
The FSI Difference Simplicity is the essence of every FSI design. The tank is divided into two 50
• Simple Design bbl compartments that can be isolated with valves.
• Rugged and Reliable Solids control equipment option
• High Performance FSI’s reliable shakers, mud cleaners, desilters and desanders can be installed
• Low maintenance upon request.
• Small footprint
Lowest Maintenance Cost
• Solids control equipment Simplicity pays off. FSI mixing tanks have the low operational and
available maintenance costs. Fluid Systems Inc. keeps you on-line for decades of
trouble free performance. It’s that simple.
General Specifications
Tank Capacity: 100 bbl mixing tank Two 50 bbl compartments
Overall dimensions: 20’8” Long x 7’7” Wide x 7’4” High
Pump size: 4x3 Mission Fluid King w/9” impeller
Pump motor size: 40 HP 1760 RPM 480/240 volt 3 ph 60 Hz TB Woods coupling
Gun lines: 2” pipe with ¾” jets and unique agitator gun line system
Mixing hopper size: 4” mixing hopper Printable Version
Valves: 4” ball valves on suction to pump and on tank for isolation
Home < Print Exit
Exceptional reliability
Simplicity is the essence of every FSI
design. The tank is divided into two 50
bbl compartments that can be isolated
with valves.
General Specifications
Engineering Manufacturing
& Sales & Sales
7676 Hillmont Rd Ste. 135 2808 Engineers Rd
Houston, TX 77040 Belle Chasse, LA 70037
713-895-8422 504-393-1804
FAX: 713-895-8616 FAX: 504-393-7080
www.fsishakers.com
Home < > Print Exit
Home < > Print Exit
Home < > Print Exit
Home < Print Exit
How to Calculate Mud Agitator Size
Correct mud agitator horse power sizing is based on a given impeller diameter versus a
given volume and mud weight. If you had a mud tank that was 10’ wide x 8’ deep x 30’
long, you should divide the tank as equally as possible, (divide length by the width) or in
this case, 3 areas that would be 10’ x 10’. If the tank depth is 8’, the normal mud depth
would be 7’ (normal fluid level is 1’ from the top). Therefore, you would have three areas
with a volume of 123.2 BBLS (10’L x 10’W x 7’D x .176 = 123.2 BBLS).
Refer to the Agitator Sizing Chart on the next page and find 123.2 BBLS on the left side,
vertical scale, move horizontally to the right until you intersect the “AXIAL” Impeller
curve. From this point move down vertically to establish the proper impeller diameter
(36”) and turnover time. Turnover time is the time required for the volume of the agitated
area to be projected by the impeller. We have established that a 30 to 90 second
turnover time is acceptable. To have less than a 30 second turnover time would create
vortexing (introducing air into the mud). To have more than a 90 second turnover time
would allow suspended solids to settle.
Therefore, the range in each impeller category (I.e. – 36”) is 30 seconds from left to 90 seconds to the right. The
example yields approximately 58 seconds turnover time. It should be noted that in the active and intermediate
tanks, turnover time should be relatively fast (30 to 60 seconds) because of the high volume of drilled solids in the
active tank and chemical and solids addition I the intermediate tanks, where high shear agitation promotes good
addition. In the suction tank, a longer turnover time (60 to 90 seconds) is desirable, preventing any aeration of the
mud just prior to entering the hole.
Below the impeller diameter are two horse power ratings: one using 20 lb. per gallon mud (mot extreme), and one
using 15 lb. per gallon mud. If the maximum mud weight will never exceed 15LB/gallon, then use that HP for the
given impeller. If the mud weight is not known, then use the 20LB/gallon HP rating.
The answer to the example problem is three 10 HP mud agitators with 36” axial flow impellers.
Agitator Sizing Chart
450
400
“RADIAL” Impeller
“AXIAL” Impeller
Technical
BBLS
350
300
250
(most recommended)
Section
200
150
100
50
0
Impeller Dia. 28” 32” 36” 40” 44” 48”
H.P. Rating (20lb. Mud) 5 7.5 10 15 20 25
H.P. Rating (15lb. Mud) 5 5 7.5 10 15 20
Approx. Tk. Width 8’ 9’ 10’ 11’ 12’ 13’
“AXIAL” Displacement
60 90 130 170 240 310
BBLS/Min.
“RADIAL” Displacement
70 106 160 200 285 360
BBLS/Min.
Weight and Dimensional Data
General
Horse Approx.
Assembly Motor Drive A B C D E F G H I J K L M
Power WT.*
Part No. Frame Wt.
M02101 5 589 184T 70 9 5½ 7½ 16¼ 3113/16 1713/16 17½ 1613/16 913/16 8 2 5¾
02102 7.5 737 213T 149 9 5½ 8½ 16¾ 3315/16 18½ 17½ 1815/16 11¼ 7¼ 2 5¾
Shaft Length
to Specify
Customer
02103 10 967 215T 176 11 7 8½ 18¾ 37½ 19¾ 19 20½ 11¼ 8½ 2½ 6¼
02104 15 1222 254T 292 12 8¼ 10 21 411/8 217/8 20¼ 231/8 133/8 8½ 2½ 6½
02105 20 1741 256T 302 14 10 10 23 4415/16 227/8 2111/16 2415/16 133/8 9½ 3 6¾
02106 25 1751 284T 360 14 9½ 11 23½ 479/16 23½ 2111/16 279/16 14¾ 8¾ 3 6¾
All dimensions stated as inches. *Basic weight is approximate and does no include motor or agitator shaft.
Upgrade your existing shaker with
the Fluid Systems ReplaceAbed ™
High “G” Force Kit.
By upgrading your existing shaker, you can
produce finer screening and subsequently
A50B Upgrade kit on a reduce mud costs.
Brandt Dual Tandem®
Many ReplaceAbed ™
Upgrade the following shakers:
FSI Model 500™ kits take only a few hours
FSI Model 500 P12™ to mount and require very
FSI Model 500 B1™ and B2™ little or no welding.
Derrick Flo Line Cleaners®
Brandt Dual Tandem®
Rumba 201 ST and 202 DT®
A500B Upgrade kit on a
Triton® Derrick Flo Line Cleaner®
Swaco®
. . . and others
• Diaphragm Pumps
• Mixing Hoppers
• Biodegradable Degreasers/Soaps/Rig Wash
Fluid Systems’ Solids Control Equipment is being used
on some of the world’s largest mud systems for bentonite
recovery and solids removal. FSI products are very low
maintenance and employ a unique, quick change panel
design. This simple feature helps to maximize the
separation potential of the equipment.
Compact Cleaning System
300 GPM Re-claimer
• Caisson Drilling
• Micro-Tunneling
• Horizontal Drilling
• Directional Drilling
• Pipeline Utility Drilling
• Environmental Crossings
50 bbl Cleaning System
Simple design, rugged and reliable
Introducing the 50 bbl cleaning tank system, FSI’s latest advance in compact
high performance equipment. FSI has designed this unit to achieve optimum
performance. Even in the most challenging applications, the 50 bbl cleaning
system achieves its design. Processing rates vary with slurry content,
percent solids and viscosity.
Exceptional reliability
The FSI Difference Simplicity is the essence of every FSI design. The tank is divided into two 25
• Simple Design bbl compartments that can be isolated with valves.
• Rugged and Reliable Solids control equipment option
• High Performance A variety of FSI’s reliable shakers, mud cleaners, desilters and desanders can
• Low maintenance be installed to fit your application
• Small footprint
Lowest Maintenance Cost
• Customizing of equipment Simplicity pays off. FSI mixing tanks have the low operational and
available maintenance costs. Fluid Systems Inc. keeps you on-line for decades of
trouble free performance. It’s that simple.
General Specifications
Tank Capacity: 50 bbl mixing tank Two 25 bbl compartments
Overall dimensions: 110”Long x 90” Wide x 126” High
Shaker shown: Series 50 Linear motion with 16.8 sq ft screening area
Desilter shown: Four Krebs U4B High Volume cones 400 GPM
Gun lines: 2” pipe with ¾” jets and unique agitator gun line system
Hand Rails: OSHA safety approved Printable Version
Valves: 4” ball valves on suction to pump and on tank for isolation
Home < Print Exit
50 bbl Cleaning System
Simple design, rugged and reliable
Introducing the 50 bbl cleaning tank
system, FSI’s latest advance in
compact high performance equipment.
FSI has designed this unit to achieve
optimum performance. Even in the
most challenging applications, the 50
bbl cleaning system achieves its
design. Processing rates vary with
slurry content, percent solids and
viscosity.
Exceptional reliability
Simplicity is the essence of every FSI
design. The tank is divided into two 25
bbl compartments that can be isolated
with valves.
General Specifications
Engineering Manufacturing
& Sales & Sales
6718 Northwinds Drive 2808 Engineers Rd
Houston, TX 77041 Belle Chasse, LA 70037
832.467.9898 504.393.1804
FAX: 832.467.9897 FAX: 504.393.5166
www.fsishakers.com
R300 Re-claimer System
Cleaning System
Hydrocyclone system: Inline header accepting 3 balanced cones rated for 20
micron cut point at 100 gpm (380 l/min) each.
Shakers: 2 High speed linear motion shakers with adjustable g-force range of
0-7 G’s and unique adjustable while drilling (AWD) jacking system for
adjusting screen angle for optimum performance in varying solids content
and fluid viscosities. System can operate with one or two shaker systems.
Feed manifold provides increased capacity and better fluid control when both
A unique single tank drilling fluid
shakers are needed as primary cut units.
solids processing system for
optimum solids removal Shaker Screen Mesh Options: 18 screen options are available; 3 mesh sizes of
efficiencies and zero base fluid MF (Maximum Flow) screen type; 6 mesh sizes of MBHCR (Metal Back High
contamination Capacity Rectangular) screen type; 9 mesh sizes of MFD (Maximum Flow
Deblinding) screen type (Four screens are required in any combination of
mesh size)
General Specifications
Tank Capacity: 2300 gallon (8706 liters)
Process Rates: 0-300+ gpm (0-1137 L/min)
Overall Dimensions: 20’ 6” Long x 8’ Wide x 9’ High
Weight: 16,000 lbs. [7,264 kg (empty)]
Mixing Type: Venturi/recirculation w/ 4-bag hopper and 4” positive displacement
venturi system
Centrifugal Pumps: Three streamline severe duty waterproof units used for mixing,
blending, feeding hydrocyclones, and super charging
reciprocating pumps.
Electric Motors: 3 motors; 40 hp, 20 hp, 15 hp- 60 Hz standard, (50 Hz on European Printable Version
model)
Home < > Print Exit
A unique single tank drilling fluid solids processing system for optimum
solids removal efficiencies and zero base fluid contamination.
Cleaning System
Hydrocyclone system: Inline header accepting 3 balanced cones rated for 20 micron cut point at 100 gpm (380
l/min) each.
Shakers: 2 High speed linear motion shakers with adjustable g-force range of 0-7 G’s and unique adjustable
while drilling (AWD) jacking system for adjusting screen angle for optimum performance in varying solids
content and fluid viscosities. System can operate with one or two shaker systems. Feed manifold provides
increased capacity and better fluid control when both shakers are needed as primary cut units.
Shaker Screen Mesh Options: 18 screen options are available; 3 mesh sizes of MF (Maximum Flow) screen type;
6 mesh sizes of MBHCR (Metal Back High Capacity Rectangular) screen type; 9 mesh sizes of MFD (Maximum
Flow Deblinding) screen type (Four screens are required in any combination of mesh size)
Home < Print Exit
Experience and planning are the keys to all
successful zero discharge projects.
Environmental Control Technology from Fluid Systems addresses the problems
encountered while planning, designing and drilling in an environmentally-sensitive
area. The environmental aspects of the well require the same kind of attention as
planning the location, designing the casing string, selecting the rig, and so on.
However, the Zero Discharge aspect is, far too often, left to the last moment. The
result? A substantial increase in the cost and liability exposure from high volumes
of material sent for disposal. Be sure to get the greatest level of environmental
control at the lowest possible cost. Call Fluid Systems before planning begins.
OEM - Oilfield
Pretensioned Screen Panels
Original Equipment Manufacturer
Fluid Systems, Inc. manufactures its own line
of screen panels in Houston, TX USA. Be-
cause Fluid Systems, Inc. is the Originall
Equipment Manufacturer, we have an un-
matched selection of OEM screen panels
in stock and ready for fast delivery.
051701
Home < Print Exit
OEM - Oilfield
Pretensioned Screen Panels
General Specifications
Screen D50 (u) Conductance Screening Area (ft^2) Screening Area (m^2) Open Area
OEM - Oilfield
Pretensioned Screen Panels
General Specifications
Screen D50 (u) Conductance Screening Area (ft^2) Screening Area (m^2) Open Area
OEM - Industrial
Pretensioned Screen Panels
Original Equipment Manufacturer
Fluid Systems, Inc. manufactures its own line
of screen panels in Houston, TX USA. Be-
cause Fluid Systems, Inc. is the Originall
Equipment Manufacturer, we have an un-
matched selection of OEM screen panels
in stock and ready for fast delivery.
The FSI Difference When you use FSI OEM screen panels you
are building with confidence.
051601
Home < Print Exit
OEM - Industrial
Pretensioned Screen Panels
General Specifications
Screen D50 (m) Conductance Screening Area (ft2) Screening Area (m2) Open Area
OEM - Industrial
Pretensioned Screen Panels
General Specifications
Screen D50 (m) Conductance Screening Area (ft2) Screening Area (m2) Open Area
Printable Version
Home < Print Exit
Since our inception in 1980, we at Fluid Systems, Inc. have manufactured screen panels
distinctively designed for our equipment. Original Fluid Systems screen panels are designed
exclusively around the needs of our customers in the petroleum, industrial, and mining industries.
Through years of field testing and in house engineering, we have developed and to this day
continue to develop several lines of screen panels to resolve most if not all situations encountered
in today’s industry. Our main goal is customer satisfaction through superior quality and service.
When you purchase the original Fluid Systems screen panels you can be certain you will receive
SUPERIOR QUALITY and TECHNICAL SUPPORT. Our staff of knowledgeable and
experienced personnel can help you choose the proper screen panels for your application and
solve most if not all problems you may experience. For more information on Fluid Systems, Inc.
original screen panels call 800.232.1804 or 832.467.9898.
Home < > Print Exit
CASE HISTORY
During drilling operations on this 18,000 foot well, the operator used a total of four (4) Fluid Systems MFD screen
panels during the entire operation. The total screen cost for this piece of equipment was $880.00.
CASE HISTORY
During the drilling of surface hole the operator encountered a sandy clay formation. At the time, the finest screens
being run were 20 mesh screens which were not original Fluid Systems screens. The maximum pump rate that
could be handled was 550 GPM with a maximum penetration rate of 75 feet per hour. Fluid Systems MFD 50 mesh
screens were installed and after one circulation the pump rate was at 800 GPM with a penetration rate of 150 feet
per hour.
CASE HISTORY
Since shale shakers are the primary stage in proper solids removal, screen selection is very critical. Improper
screen selection can lead to loss of drilling fluids, solids removal equipment overload, premature pump part failures and
serious downhole problems. Shale shakers are only as efficient as the screens that are installed on them. When the
proper screens are selected the shakers will enhance the performance of other down - stream solids removal
equipment. The following manual will give you helpful information on proper screening of your Fluids Systems solids
control equipment. The various tables and charts will aid in the proper screen selection for your application. All Fluid
Systems screens are factory tensioned and bonded to eliminate improper tensioning.
SCREEN TYPES
MF SERIES
The MF series screens are manufactured using tensile bolting cloth. This cloth allows more fluid to be
processed than the market grade cloths used on older style shakers. This enables finer screens to be
utilized during the initial stages of drilling.
MB SERIES
The MB series screens use the same wirecloth as the MF series with the addition of a perforated support
plate. These screens allow for heavier solids loading than the MF series screens. These screens also
allow repairs to be made to damaged sections of the screens. This feature adds longer service life to the
screen panel.
MFD SERIES
The MFD series screens were designed specifically for near size particle blinding. The special
layering and assembly procedures used to manufacture these screens contribute to maximum
deblinding and excellent service life. These screens are particularly effective in screening sand and
sandy clays.
MBHCR SERIES
The MBHCR series screens are manufactured using the patented Cagle HCR cloth. This rectangular
weave allows for maximum fluid processing and optimum solids removal. These screens also utilize the
perforated support plate. These screens are extremely effective in screening synthetic or very viscous
fluids.
* For pricing and availability on any of the Fluid Systems OEM screen panels call 1.800.232.1804
Home < > Print Exit
5
FLUID SYSTEMS, INC.
MF / MB SERIES SCREENS
F L U I D S Y S T E M S , I N C .
V O L U M E H A N D L I N G C H A R T
F O R S E R I E S 5 0 S H A K E R S U S I N G M F / M B T Y P E S C R E E N S
800
700
H A N D L I N G
600
M F 3 0
500
V O L U M E
M F 5 0
M F 8 0
M F / M B 1 0 0
M F / M B 1 2 0
400 M F / M B 1 6 5
M F / M B 1 8 0
M F / M B 2 0 0
300
200
100
0
5 1 0 1 5 2 0 2 5 3 0 3 5 4 0
P L A S T I C V I S C O C I T Y
Home < > Print Exit
6
FLUID SYSTEMS, INC.
MF / MB SERIES SCREENS
1000
900
800
700
MF 30
MF 50
600 MF 80
MF/MB 100
MF/MB 120
MF/MB 165
500
MF/MB 180
MF/MB 200
400
300
200
100
0
5 10 15 20 25 30 35 40
PLASTIC VISCOCITY
Home < > Print Exit
7
FLUID SYSTEMS, INC.
SEPARATION POTENTIAL
SCREEN D50 D16 D84 E.O.A. CONDUCTANCE AREA TRANSMITTANCE
800
700
600
MFD 38
500 MFD 50
MFD 75
MFD 95
MFD 135
MFD 170
400
MFD 190
MFD 240
300
200
100
0
5 10 15 20 25 30 35 40
PLASTIC VISCOCITY
Home < > Print Exit
8
FLUID SYSTEMS, INC.
SEPARATION POTENTIAL
SCREEN D50 D16 D84 E.O.A. CONDUCTANCE AREA TRANSMITTANCE
1000
900
800
700
MFD 38
MFD 50
600 MFD 75
MFD 95
MFD 135
MFD 170
500
MFD 190
MFD 240
400
300
200
100
0
5 10 15 20 25 30 35 40
PLASTIC VISCOCITY
Home < > Print Exit
9
FLUID SYSTEMS, INC.
SEPARATION POTENTIAL
SCREEN D50 D16 D84 E.O.A. CONDUCTANCE AREA TRANSMITTANCE
700
600
500
MBHCR 80
MBHCR 100
400
MBHCR 150
MBHCR 200
MBHCR 250
300
200
100
0
5 10 15 20 25 30 35 40
PLASTIC VISCOCITY
Home < > Print Exit
10
FLUID SYSTEMS, INC.
SEPARATION POTENTIAL
SCREEN D50 D16 D84 E.O.A. CONDUCTANCE AREA TRANSMITTANCE
1000
900
800
700
MBHCR 80
600 MBHCR 100
MBHCR 150
MBHCR 200
MBHCR 250
500
400
300
200
100
0
5 10 15 20 25 30 35 40
PLASTIC VISCOCITY
Home < > Print Exit
11
Model 50 Shakers
2) Check shaker deck angle. Shakers are manufactured in a fixed flat position. If they have been modified to be adjustable
set the deck flat. This will ensure that gumbo is conveyed from the shaker properly.
5) Select screens that will allow fluid to cover 3/4 to all of the area on the feed end panel before solids return to the surface.
This can be done while drilling cement if the pump rates and drilling fluid properties are those which will be used during
drilling operations.
7) During drilling operations, keep possum belly as clean as possible. This may be required as often as each connection.
Keeping the possum belly clean will help dampen drilling fluid velocity before reaching the screens.
Home < > Print Exit
12
2) Check shaker deck angle. Shakers are manufactured to be adjustable from 5 degrees uphill to 5 degrees
downhill. Deck angle should be set flat. Never set deck angles uphill when drilling gumbo as this will
slow down the conveyanceof gumbo and allow it to dry on the screens and plug the screening area.
.
3) Inflate all air springs to 40-50 PSI.
5) Select screens that will allow fluid to cover all of the area on the feed end panel and 1/2 the area of the middle
before solids return to the surface.This can be done while drilling cement if the pump rates and drilling fluid
properties are those which will be used during drilling operations.
7) During drilling operations, keep possum belly as clean as possible. This may be required as often as each
connection. Keeping the possum belly clean will help dampen drilling fluid velocity before reaching the screens.
Home < > Print Exit
13
Top Deck - Two (2) 42” x 29” pretensioned screen panels with wedgelocks
Bottom Deck - Three (3) 42” x 29” pretensioned screens with wedgelocks
1) The top deck is the Model 50 shaker. Prepare this deck as you would the standard Model 50 deck for gumbo.
This deck is considered the scalping deck and should be screened with screens that effectively handle
circulating volumes while at the same time not allowing gumbo to dry out.
2) The bottom deck is the Model 500 shaker. It should be prepared the same as the standard Model 500 shakers
with the exception of screen selection. This deck should be screened with screens no less than two (2) mesh
sizes finer that that of the top deck. Since the top deck will be removing approximately 75% of the gumbo, this
deck may be inclined slightly to accommodate finer screens if necessary. Take caution not to exceed 2.5
degrees uphill.
3) The possum belly may be dumped on this unit as the dump valve will divert flow to the bottom deck and not into
the sand trap as it would on the standard model shakers.
TIP If by chance the top deck will not handle the desired circulating rate or remove the gumbo efficiently, and the
fluid is only covering one screen on the bottom deck, it is a very good indicator that you have chosen a screen
too coarse to effectively remove gumbo on the top deck. If this is occurring, screen the top deck with the same
screens that are on the bottom deck and chose screens that are at least two (2) mesh sizes finer for the
bottom deck.
Home < > Print Exit
14
GLOSSARY
Area - The total non blanked area of the screen panel measured in square feet.
Blinding - A reduction of the open area in the screen surface caused by particles that have become lodged in
the mesh openings or materials forming a film that covers the mesh openings.
Conductance - The ease with which a fluid can flow through a screen measured in kilodarcies/millimeter.
D50 - The average opening size of the screen measured in microns. This value is used to determine the
separation potential of a screen. Particles this size have a 50% probability of being removed.
D16 & D84 - These are used to indicate the range of opening sizes present in the screen. They can be very
helpful when wanting to remove fines from unweighted mud or preventing barite removal in weighted
mud.
Deblinding Screen - A screen in which the mesh layering prevents most particles that are the same size as
the openings in the top mesh from becoming lodged in the openigs. The interaction of
the two meshes caused by the motion of the shaker also tends to dislodge the paticles
that are partially stuck in the openings.
E.O.A. - Effective Open Area - The resultant percent of open area of the screen panel due to the
combination of mesh layers.
Mesh - The number of openings in the screen cloth measured from the center of one wire to a point 1” distant.
Pretensioned - A screen in which the mesh layers have been stretched to proper tensions during the
manufacturing process and need no further tensioning once installed.
Transmittance - The conductance in combination with the area. This value compares the liquid through put
capacity of screens with different areas.
Home < Print Exit
15
TROUBLE SHOOTING
Gumbo sticking to screens Screens too coarse Screen up until mud covers 2/3 of
screening deck
Solids running across bed Motor burnt or not running Repair or replace motor
erratically or to one side
Motors turning in same direction Change rotation of one motor
Telephone
Date of
Fax Inquiry
Pump Rate
Hole Section Hole Diameter ROP (ft/hr) (gpm) Mud Type Mud Weight Mud P.V.
(1) -
(2) -
(3) -
(4) -
(5) -
No. of Shakers
(Type/Model)
Note: Fluid Systems, Inc will keep this information in strict confidence.
The sole purpose of this questionnaire is to assist with shaker screen selection.
(2)
(3)
(4)
(5)
Please call Fluid Systems with any questions or for more information.
1. Knock out the Wedgelok™ 2. Replace the Screen 3. Reinsert the Wedgelok™
With our Wedgelok™, all it takes to remove a screen panel is a minute and a hammer. Our
simple design does away with expensive bulky hardware and “wobbled” tension bolt holes.
Fluid Systems manufactures our own line of screen panels in Houston, TX USA. Because FSI
is the Original Equipment Manufacturer, we have an unmatched selection of OEM screen
panels in stock and ready for fast delivery. Our screen panels include “specialty screens” for
de-blinding, high volume handling, high abrasion, sticky clays and many other situations
encountered while screening. Years of stringent quality and manufacturing experience
allows proper screen selection for your application.
We at Fluid Systems believe there is more to the product than simply getting it out the door. Supporting our customers
and their clients is an all important facet of our marketing effort. Our in-house engineers will customize our screening
equipment to fit your needs at little to no cost. We can be reached at the following locations:
Manufacturing & Sales
2808 Engineers Road
Belle Chasse, LA 70037 USA Pete Hoffmann
David Lapeyrouse
Telephone: (504) 393-1804 Wayne Knight
(USA Only): (800) 232-1804 Mike Townsend
Fax: (504) 393-5166 Tony Williams
Email: service@fsishakers.com Robert Moore
sales@fsishakers.com Parker Hillery
General Specifications
Series 2L D18
Linear Power Shaker
General Specifications
Series: 2L
Model: D18
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 5.0 “G”
• 8.44 ft² [.78 m²] screening area VGS: Force adjustable to 7.0 “G” maximum
• Simple Design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and Reliable Screens: One 29” x 42” pre-tensioned panel
• High performance with Wedgelok fasteners
• Low maintenance Screening Area: 8.44 ft² [.78 m²]
• Quick screen panel changes Overall Dimensions: 59 1/4” L x 53 1/8” W x 30 3/4” H
1506mm x 1349mm x 781mm
• Small footprint
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series 2L D18
Linear Power Shaker
VGS Configuration Optional
High “G” force, high volume
Introducing the 2L D18, FSI’s latest advance
in high “G” force linear motion shakers. FSI
has designed this unit to achieve optimum
performance. Even in the most challeng-
ing applications, the 2L D18 achieves con-
sistently high throughput. Processing
rates vary with slurry content, percent sol-
ids and viscosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
051801
Home < Print Exit
Series 2L D18
Linear Power Shaker
General Specifications
Series: Series 2L
Model: D18
Motors: Two each 1800, 1500 or 1200 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.13" A (1800), 0.156” A (1500),
0.23” A (1200), 5.0 “G”
VGS: Force adjustable to 7.0 “G” maximum
Deck adjustment: Adjustable 0° to 5° uphill
Screens: One 29" x 42" pretensioned panel
with Wedgelok fasteners
Screening area: 8.44 ft2 [0.78 m2]
Overall dimensions: 59 1/4" L x 53 1/8" W x 30 3/4" H
1506mm x 1349mm x 781mm
53 1/8" [1349mm]
33 1/4" [845mm]
46 3/4" [1187mm]
29 1/4" [743mm]
54 3/16" [1377mm]
30 3/4" [781mm]
28" [712mm]
53" [1346mm]
59 1/4" [1506mm]
General Specifications
Series 20L ACMF
Linear Power Shaker
General Specifications
Series: 20L
Model: ACMF
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 5.0 “G”
• 16.9 ft² [1.57 m²] screening area VGS: Force adjustable to 7.0 “G” maximum
• Simple Design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and Reliable Screens: Two each 29” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 16.9 ft² [1.57 m²]
• Quick screen panel changes Overall Dimensions: 109” L x 54 3/4” W x 39 1/2” H
2787mm x 1333mm x 1004mm
• Small footprint
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series 20LACMF
Linear Power Shaker
VGS Configuration Optional
High “G” force, high volume
With almost 17 square feet of screening
area the 20LACMF high volume linear mo-
tion shaker can reach high “G” forces that
will enable the user to achieve optimum per-
formance. Even in the most challenging ap-
plications, the 20LACMF achieves consis-
tently high throughput. Processing rates vary
with slurry content, percent solids and vis-
cosity.
Series 20LACMF
Linear Power Shaker
General Specifications
Series: Series 20L
Model: ACMF
Motors: Two each 1800, 1500 or 1200 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.13" A (1800), 0.156” A (1500),
0.23” A (1200), 5.0 “G”
VGS: Force adjustable to 7.0 “G” maximum
Deck adjustment: Adjustable 0° to 5° uphill
Screens: Two each 29" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 16.87 ft2 [1.57 m2]
Overall dimensions: 109" L x 54 3/4" W x 39 1/2" H
2787 mm x 1333 mm x 1004 mm
General Specifications
Series 2984 DD
Linear Power Shaker
General Specifications
Series: 2984
Model: DD
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 5.0 “G”
• Double Deck Design VGS: Force adjustable to 8.0 “G” maximum
• 33.7 ft² [3.14 m²] screening area Deck adjustment: Adjustable 0° to 5° uphill
• Simple Design Screens: Four each 29” x 42” pre-tensioned
• Rugged and Reliable panels with Wedgelok fasteners
• High performance Screening Area: 33.7 ft² [3.14 m²]
• Low maintenance Overall Dimensions: 94 3/4” L x 55 5/8” W x 29 5/8” H
2405mm x 1411mm x 752mm
• Quick screen panel changes
• Small footprint
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series 2984 DD
Linear Power Shaker
VGS Configuration Optional
High speed, high volume
Introducing the 2984 DD, FSI’s latest ad-
vance in high “G” force, high volume linear
motion shakers. FSI has designed this unit
to achieve optimum performance. Even in
the most challenging applications, the 2984
DD achieves consistently high throughput.
Processing rates vary with slurry content,
percent solids and viscosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
protection. Each of the unit’s four
The FSI Difference pretensioned screen panels can be installed
or replaced independently of each other.
• High “G” Force Replacement takes less than three minutes
and requires only a light to medium-weight
• Double deck hammer.
• Rugged and reliable
Lowest maintenance cost
• High performance Simplicity pays off. FSI equipment have the
• Low maintenance lowest operational and maintenance costs in
the industry. Routine maintenance is
• Quick screen panel changes extremely minimal. Simple visual checks of
screen panels, deck rubbers, inflation of air
• Small footprint spring assemblies, and quarterly torque checks
• No lubrication of the vibrator motor bolts are all that is
required. Fluid Systems, Inc. keeps you on-line
• 33.7 ft2 [3.14 m2] screening area for decades of trouble-free performance. It’s
that simple!
• Low noise
052101
Home < Print Exit
Series 2984 DD
Linear Power Shaker
General Specifications
Series: Series 2984
Model: DD
Motors: Two each 1800, 1500 or 1200 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.13" A (1800), 0.156” A (1500),
0.23” A (1200), 5.0 “G”
VGS: Force adjustable to 8.0 “G” maximum
Deck adjustment: Adjustable 0° to 5° uphill
Screens: Four each 29" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 33.7 ft2 [3.14 m2]
Overall dimensions: 94 3/4" L x 55 5/8" W x 29 5/8" H
2405mm x 1411mm x 752mm
General Specifications
Series 3642B DFL
Linear Power Double Feed Shaker
General Specifications
Series: 3642B
Model: DFL
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 4.5 “G”
• 21 ft² [1.95 m²] screening area VGS: Force adjustable to 7.0 “G” maximum
• Simple Design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and Reliable Screens: Two each 36” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 21 ft² [1.95 m²]
• Quick screen panel changes Overall Dimensions: 117 7/8" L x 62 7/8" W x 112 5/8" H
2992mm x 1595mm x 2861mm
• Small footprint
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 75-dB
motor vibration eliminates the need for
hearing protection. Each of the unit’s two
pretensioned screen panels can be installed
or replaced independently of each other.
Replacement takes less than three minutes
General Specifications
Series 3642 2P
Linear Power Shaker
General Specifications
Series: 3642
Model: 2P
Motors: Two each 1500 or 1800 rpm exp.
proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.156” A(1500), 0.13” A(1800),
• High “G” Force
4.5 “G”
• 21 ft² [1.95 m²] screening area VGS: Force adjustable to 7.0 “G” maximum
• Simple Design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and Reliable Screens: Two each 36” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 21 ft² [1.95 m²]
• Quick screen panel changes Overall Dimensions: 109 3/4" L x 62 3/4" W x 45" H
2787mm x 1595mm x 1143mm
• Small footprint
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series 3642 2P
Linear Power Shaker
VGS Configuration Optional
High “G” force, high volume
Introducing the 3642 2P, FSI’s latest ad-
vance in high “G” force, high volume linear
motion shakers. FSI has designed this unit
to achieve optimum performance. Even in
the most challenging applications, the 3642
2P achieves consistently high throughput.
Processing rates vary with slurry content,
percent solids and viscosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 75-dB
motor vibration eliminates the need for
The FSI Difference hearing protection. Each of the unit’s two
pretensioned screen panels can be installed
• High “G” force or replaced independently of each other.
Replacement takes less than three minutes
• 21ft2 [1.95 m2] screening area and requires only a light to medium-weight
• Simple design hammer.
052101
Home < Print Exit
Series 3642 2P
Linear Power Double Feed Shaker
General Specifications
Series: Series 3642
Model: 2P
Motors: Two each 1800 or 1500 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.13" A (1800), 0.156” A (1500),
4.5 “G”
VGS: Force adjustable to 7.0 “G” maximum
Screens: Two each 36" x 42" pretensioned
panels with Wedgelok™ fasteners
Screening area: 21 ft2 [1.95 m2]
Overall dimensions: 109 3/4" L x 62 3/4" W x 45" H
2787mm x 1595mm x 1143mm
General Specifications
Series 500 BHS
Linear Power Shaker
General Specifications
Series: 500
Model: BHS
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 5.0 “G”
• 25.3 ft² [2.35 m²] screening area VGS: Force adjustable to 7.0 “G” maximum
• Simple Design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and Reliable Screens: Three each 29” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 25.3 ft² [2.35 m²]
• Quick screen panel changes Overall Dimensions: 150 5/8" L x 73 3/4" W x 68" H
3827mm x 1872mm x 1725mm
• Small footprint
Weir Height: 51 1/2” [1309 mm]
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series 500BHS
Linear Power Shaker
VGS Configuration Optional
High “G” force, high volume
Introducing the 500 BHS, FSI’s latest advance
in high “G” force, high volume linear motion
shakers. FSI has designed this unit to achieve
optimum performance. Even in the most chal-
lenging applications, the 500 BHS achieves
consistently high throughput. Processing rates
vary with slurry content, percent solids and vis-
cosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
The FSI Difference protection. Each of the unit’s three
pretensioned screen panels can be installed
or replaced independently of each other.
• High “G” force Replacement takes less than three minutes
• 25.3 ft2 [2.53 m2] screening area and requires only a light- to medium-weight
hammer.
• Simple design
• Rugged and reliable Lowest maintenance cost
Simplicity pays off. FSI equipment have the
• High performance lowest operational and maintenance costs in
• Low maintenance the industry. Routine maintenance is
extremely minimal. Simple visual checks of
• Quick screen panel changes screen panels, deck rubbers, inflation of air
spring assemblies, and quarterly torque checks
• Small footprint of the vibrator motor bolts are all that is
• No lubrication required. Fluid Systems, Inc. keeps you on-line
for decades of trouble-free performance. It’s
• Low noise that simple!
021801
Home < Print Exit
Series 500BHS
Linear Power Shaker
General Specifications
Series: 500
Model: BHS
Motors: Two each 1800, 1500 or 1200 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.13" A (1800), 0.156” A (1500),
0.23” A (1200), 5.0 “G”
VGS: Force adjustable to 7.0 “G” maximum
Deck adjustment: Adjustable 0° to 5° uphill
Screens: Three each 29" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 25.3 ft2 [2.35 mm2]
Overall dimensions: 150 5/8" L x 73 3/4" W x 68" H
3827mm x 1872mm x 1725mm
Weir Height: 51 1/2” [1309 mm]
General Specifications
Series 500 P2CS
Linear Shaker
General Specifications
Series: 500
Model: P2CS
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• 25.3 ft² [2.35 m²] screening area
0.13” A(1800), 5.0 “G”
• Simple Design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and Reliable Screens: Three each 29” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 25.3 ft² [23.5 m²]
• Quick screen panel changes Overall Dimensions: 110 1/4" L x 68 3/4" W x 44" H
• Small footprint 2800mm x 1747mm x 1115mm
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series 500P2CS
Linear Shaker
Simple, rugged design
Introducing the 500 P2CS, FSI’s latest advance
in high “G” force, high volume linear motion
shakers. FSI has designed this unit to achieve
optimum performance. Even in the most
challenging applications, the 500 P2CS
achieves consistently high throughput. Pro-
cessing rates vary with slurry content, per-
cent solids and viscosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
021801
Home < Print Exit
Series 500P2CS
Linear Shaker
General Specifications
Series: 500
Model: P2CS
Motors: Two each 1800, 1500 or 1200 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.13" A (1800), 0.156” A (1500),
0.23” A (1200), 5.0 “G”
Deck adjustment: Adjustable 0° to 5° uphill
Screens: Three each 29" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 25.3 ft2 [2.35 m2]
Overall dimensions: 110 1/4" L x 68 3/4" W x 44" H
2800mm x 1747mm x 1115mm
General Specifications
Series 500 P2CL
Linear Shaker
General Specifications
Series: 500
Model: PSCL
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• 25.3 ft² [2.35 m²] screening area
0.13” A(1800), 5.0 “G”, 20Hz
• Simple Design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and Reliable Screens: Three each 29” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 25.3 ft² [2.35 m²]
• Quick screen panel changes Overall Dimensions: 114" L x 68 3/4" W x 48 1/8" H
• Small footprint 2896mm x 1747mm x 1222mm
• No lubrication Weir Height: 35” [889 mm]
• Low noise
Printable Version
Home < > Print Exit
Series 500P2CL
Linear Shaker
Simple, rugged design
Introducing the 500P2CL, FSI’s latest advance
in high volume linear motion shakers. FSI has
designed this unit to achieve optimum perfor-
mance. Even in the most challenging applica-
tions, the 500P2CL achieves consistently high
throughput. Processing rates vary with slurry
content, percent solids and viscosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
protection. Each of the unit’s three
The FSI Difference pretensioned screen panels can be installed
or replaced independently of each other.
Replacement takes less than three minutes
• 25.3 ft2 [2.35m2] screening area and requires only a light- to medium-weight
• Simple design hammer.
021901
Home < Print Exit
Series 500P2CL
Linear Shaker
General Specifications
Series: Series 500
Model: P2CL
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.13" A (1800), 0.156” A (1500),
0.23” A (1200), 5.0 “G”, 20 Hz
Deck adjustment: Adjustable 0° to 5° uphill
Screens: Three each 29" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 25.3 ft2 [2.35 m2]
Overall dimensions: 114" L x 68 3/4" W x 48 1/8" H
2896mm x 1747mm x 1222mm
Weir Height: 35” [889 mm]
General Specifications
Series 5000 BCS
Linear Power Shaker
General Specifications
Series: 5000
Model: BCS
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” force
0.13” A(1800), 5.0 “G”
• 34 ft² [3.16 m²] screening area VGS: Force adjustable to 8.0 “G” maximum
• Simple Design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and Reliable Screens: Four each 29” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 34 ft² [3.16 m²]
• Quick screen panel changes Overall Dimensions: 160 1/4" L x 69" W x 60 1/4" H
4070mm x 1753mm x 1529mm
• Small footprint
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series 5000BCS
Linear Power Shaker
VGS Configuration Optional
High “G” force, high volume
Introducing the 5000BCS, FSI’s latest advance
in high “G” force, high volume linear motion
shakers. FSI has designed this unit to achieve
optimum performance. Even in the most chal-
lenging applications, the 5000BCS achieves
consistently high throughput. Processing rates
vary with slurry content, percent solids and vis-
cosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
Series 5000BCS
Linear Power Shaker
General Specifications
Series: Series 5000
Model: BCS
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23" A (1200), 0.156” A (1500),
0.13” A (1800), 5.0 “G”
VGS: Force adjustable to 8.0 “G” maximum
Deck adjustment: Adjustable 0° to 5° adjustable
Screens: Four each 29" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 34 ft2 [3.16 m2]
Overall dimensions: 160 1/4" L x 69" W x 60 1/4" H
4070mm x 1753mm x 1529mm
General Specifications
Series 5000 BHS
Linear Power Shaker
General Specifications
Series: 5000
Model: BHS
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” force
0.13” A(1800), 5.0 “G”
• 33.8 ft² [3.14 m²] screening area VGS: Force adjustable to 7.0 “G” maximum
• Simple Design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and Reliable Screens: Four each 29” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 33.8 ft² [3.14 m²]
• Quick screen panel changes Overall Dimensions: 179 7/8" L x 69" W x 77 1/2" H
4569mm x 1753mm x 1967mm
• Small footprint
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series 5000BHS
Linear Power Shaker
VGS Configuration Optional
High “G” force, high volume
Introducing the 5000BHS, FSI’s latest ad-
vance in high “G” force, high volume linear
motion shakers. FSI has designed this unit
to achieve optimum performance. Even in the
most challenging applications, the 5000BHS
achieves consistently high throughput. Pro-
cessing rates vary with slurry content, per-
cent solids and viscosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
protection. Each of the unit’s four pretensioned
screen panels can be installed or replaced
independently of each other. Replacement
The FSI Difference takes less than three minutes and requires
only a light- to medium-weight hammer.
• High “G” force
• 33.76 ft2 [3.14 m2] Lowest maintenance cost
Simplicity pays off. FSI equipment have the
screening area lowest operational and maintenance costs in
the industry. Routine maintenance is
• Simple design extremely minimal. Simple visual checks of
• Rugged and reliable screen panels, deck rubbers, inflation of air
spring assemblies, and quarterly torque checks
• High performance of the vibrator motor bolts are all that is
• Low maintenance required. Fluid Systems, Inc. keeps you on-line
for decades of trouble-free performance. It’s
• Quick screen panel changes that simple!
• Small footprint
• No lubrication
• Low noise
Series 5000BHS
Linear Power Shaker
General Specifications
Series: Series 5000
Model: BHS
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23" A (1200), 0.156” A (1500),
0.13” A (1800), 5.0 “G”
VGS: Force adjustable to 7.0 “G” maximum
Deck adjustment: Adjustable 0° to 5° adjustable
Screens: Four each 29" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 33.76 ft2 [3.14 m2]
Overall dimensions: 179 7/8" L x 69" W x 77 1/2" H
4569mm x 1753mm x 1967mm
General Specifications
Series 5000 BTHS
Linear Power Shaker
General Specifications
Series: 5000
Model: BTHS
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” force
0.13” A(1800), 5.0 “G”
• 33.8 ft² [3.14 m²] screening area VGS: Force adjustable to 7.0 “G” maximum
• Simple Design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and Reliable Screens: Four each 29” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 33.8 ft² [3.14 m²]
• Quick screen panel changes Overall Dimensions: 175 7/8" L x 63" W x 90 7/16" H
4467mm x 1600mm x 2297mm
• Small footprint
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Exceptional reliability
Simplicity is the essence of every FSI
design. Permanently sealed vibrators
General Specifications
Series 29126 Double Deck Drier (“3D”) ®
VGS ™ Linear Cuttings Drier
General Specifications
Series: 29-126
Model: B4
Motors: Two each 1200, 1500 or 1800 rpm exp.
proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
The FSI Difference Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force 0.13” A(1800), 4.5 “G”
VGS: Force adjustable to 10.0 “G” maximum
• Double Deck Design
Deck adjustment: Adjustable 0° to 5° uphill
• 50.6 ft² screening area Screens: Six each 29” x 42” pre-tensioned
• Simple Design panels with Wedgelok fasteners
• Rugged and Reliable Screening Area: 50.6 ft² [4.7 m²]
• High Performance Overall Dimensions: 140” L x 63 9/16” W x 54 1/4” H
• Low maintenance 3556mm x 1614mm x 1378mm
• Quick screen panel changes
• Small footprint
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
General Specifications
Series 20L DSR2H-10
Linear Power Mud Cleaner
General Specifications
Series: 20L
Model: DSR2H-10
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 4.5 “G”
• 16.9 ft² [1.57 m²] screening area VGS: Force adjustable to 8.0 “G” maximum
• Simple Design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and Reliable Screens: Two each 29” x 42” pre-tensioned
• High Performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 16.86 ft² [1.57 m²]
• Quick screen panel changes Overall Dimensions: 89 5/8" L x 54 3/4" W x 72 3/8" H
• Small footprint 2276mm x 1391mm x 1873mm
• No lubrication Cone capacities: 1000 GPM total [227.1 m³/hr]
• Low noise
• High volume hydrocyclones
Printable Version
Home < > Print Exit
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
protection. Each of the unit’s two pretensioned
screen panels can be installed or replaced
independently of each other. Replacement
takes less than three minutes and requires
The FSI Difference only a light to medium-weight hammer.
• Low noise
• High volume hydrocyclones
Houston Office New Orleans Office
6718 Northwinds Dr. 2808 Engineers Road
Houston, TX 77041 Belle Chasse, LA 70037
832-467-9898 504-393-1804
FAX: 832-467-9897 FAX: 504-393-5166
www.fsishakers.com 042201
Home < Print Exit
General Specifications
Series 500B102DHC
Double Header Mud Cleaner
General Specifications
Series: 500
Model: B3NP102DHC
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 4.5 “G”
• 25.4 ft² [2.36 m²] screening area VGS: Force adjustable to 8.0 “G” maximum
• Simple Design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and Reliable Screens: Three each 29” x 42” pre-tensioned
• High Performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 25.4 ft² [2.36 m²]
• Quick screen panel changes Overall Dimensions: 109 7/8" L x 73 3/4" W x 90" H
• Small footprint 2789mm x 1873mm x 2287mm
• No lubrication Header capacity: 2000 GPM total - 1000 GPM each
• Low noise
• 2000 GPM
Printable Version
Home < > Print Exit
Series 500B102DHC
Double Header Mud Cleaner
VGS Configuration Optional
High “G” force, high volume
Introducing the 500 B102DHC, FSI’s latest ad-
vance in high “G” force, high volume linear
motion mud cleaners. FSI has designed this
unit to achieve optimum performance. Even in
the most challenging applications, the 500
B102DHC achieves consistently high through-
put. Processing rates vary with slurry content,
percent solids and viscosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
protection. Each of the unit’s three
pretensioned screen panels can be installed
or replaced independently of each other.
The FSI Difference Replacement takes less than three minutes
and requires only a light- to medium-weight
• High “G” force hammer.
Series 500B102DHC
Double Header Mud Cleaner
General Specifications
Series: Series 500 Mud Cleaner
Model: B3NP102DHC
Motors: Two each 1800, 1500 or 1200 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.13" A (1800), 0.156” A (1500),
0.23” A (1200), 4.5 “G”
VGS: Force adjustable to 8.0 “G” maximum
Deck adjustment: Adjustable 0° to 5° uphill
Screens: Three each 29" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 25.4 ft2 [2.36 m2]
Overall dimensions: 109 7/8" L x 73 3/4" W x 90" H
2789mm x 1873mm x 2287mm
Header capacity: 2000 GPM total - 1000 GPM each
General Specifications
Series 500/500 B
Linear Power Cascade Unit
General Specifications
Series: 500/500
Model: B
Motors: Four each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 4.5 “G”
• 50.8 ft² [4.72 m²] screening area VGS: Force adjustable to 8.0 “G” maximum
• Simple design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and reliable Screens: Six each 29” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 50.8 ft² [4.72 m²]
• Quick screen panel changes Overall Dimensions: 132” L x 73 5/8” W x 84” H
3353mm x 1870mm x 2134mm
• Small footprint
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series 500/500B
Linear Power Cascade Unit
VGS Configuration Optional
High “G” force, high volume
Introducing the 500/500 B, FSI’s latest ad-
vance in high “G” force, high volume cascad-
ing systems. FSI has designed this unit to
achieve optimum performance. Even in the
most challenging applications, the 500/500
B achieves consistently high throughput.
Processing rates vary with slurry content, per-
cent solids and viscosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
protection. Each of the unit’s six pretensioned
screen panels can be installed or replaced
The FSI Difference independently of each other. Replacement
takes less than five minutes and requires only
• High “G” force machines a light- to medium-weight hammer.
• 50.8 ft2 [4.72 m2] screening area Lowest maintenance cost
• Simple design Simplicity pays off. FSI equipment have the
lowest operational and maintenance costs in
• Rugged and reliable the industry. Routine maintenance is
• High performance extremely minimal. Simple visual checks of
screen panels, deck rubbers, inflation of air
• Low maintenance spring assemblies, and quarterly torque checks
of the vibrator motor bolts are all that is
• Quick screen panel changes required. Fluid Systems, Inc. keeps you on-line
• Small footprint for decades of trouble-free performance. It’s
that simple!
• No lubrication
• Low noise
Series 500/500B
Linear Power Cascade Unit
General Specifications
Series: Series 500/500
Model: B
Motors: Four each 1800, 1500 or 1200 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.13" A (1800), 0.156” A (1500),
0.23” A (1200), 4.5 “G”
VGS: Force adjustable to 8.0 “G” maximum
Deck adjustment: Adjustable 0° to 5° uphill
Screens: Six each 29" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 50.8 ft2 [4.72 m2]
Overall dimensions: 132" L x 73 5/8" W x 84" H
3353mm x 1870mm x 2134mm
General Specifications
Series 20L CL
Linear Power Shaker
General Specifications
Series: 20L
Model: CL
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 5.0 “G”
• 16.9 ft² [1.57 m²] screening area VGS: Force adjustable to 7.0 “G” maximum
• Simple Design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and Reliable Screens: Two each 29” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 16.9 ft² [1.57 m²]
• Quick screen panel changes Overall Dimensions: 114 3/16” L x 55 9/16” W x 46 15/16” H
2900mm x 1411mm x 1192mm
• Small footprint
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series 20L CL
Linear Power Shaker
VGS Configuration Optional
High “G” force, high volume
With almost 17 square feet of screening
area the 20LACMF high volume linear
motion shaker can reach high “G” forces
that will enable the user to achieve
optimum performance. Even in the most
challenging applications, the 20LACMF
achieves consistently high throughput.
Processing rates vary with slurry content,
percent solids and viscosity.
Series 20L CL
Linear Power Shaker
General Specifications
Series: 20L
Model: CL
Motors: Two each 1800, 1500 or 1200 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.13" A(1800), 0.156" A(1500),
0.23" A(1200), 5.0 “G”
VGS: Force adjustable to 7.0 “G” maximum
Deck Adjustment: Adjustable 0° to 5° uphill
Screens: Two each 29" x 42" pretensioned
panels with Wedgelok™ fasteners
Screening area: 16.9 ft² [1.57m²]
Overall dimensions: 114 3/16" L x 55 9/16" W x 46 15/16" H
2900mm 1411mm 1192mm
General Specifications
Series A500 B
Linear Power ReplaceAbed™
General Specifications
Series: A500
Model: B
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 5.0 “G”
• 25.4 ft² [2.36 m²] screening area VGS: Force adjustable to 7.0 “G” maximum
• Easy change-out design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and reliable Screens: Three each 29” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 25.4 ft² [2.36 m²]
• Quick screen panel changes Overall Dimensions: 100” L x 73 5/8” W x 24” H
2540mm x 1870mm x 610mm
• Small footprint
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series A500B
Linear Power ReplaceAbedTM
VGS Configuration Optional
Retro-fit competitor’s shaker beds
Introducing the A500 B ReplaceAbedTM,
FSI’s latest advance in high “G” force, high vol-
ume linear motion retro-fit shaker beds. FSI
has designed this unit to replace many
competitor’s shaker beds at a fraction of the
cost of a new machine and achieve optimum
performance. Even in the most challenging ap-
plications, the A500 B ReplaceAbed TM
achieves consistently high throughput. Pro-
cessing rates vary with slurry content, percent
solids and viscosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
The FSI Difference systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
• High “G” force protection. Each of the unit’s three
pretensioned screen panels can be installed
• 25.4 ft2 [2.36 m2] screening area or replaced independently of each other.
Replacement takes less than three minutes
• Easy change-out design and requires only a light- to medium-weight
• Rugged and reliable hammer.
Series A500B
Linear Power ReplaceAbedTM
General Specifications
Series: A500 ReplaceAbedTM
Model: B
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23" A (1200), 0.156” (1500)
0.13” A (1800), 5.0 “G”
VGS: Force adjustable to 7.0 “G” maximum
Deck adjustment: Adjustable 0° to 5° uphill
Screens: Three each 29" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 25.4 ft2 [2.36 m2]
Overall dimensions: 100” L x 73 5/8” W x 24” H
2540mm x 1870mm x 610mm
General Specifications
Black Thunder
Linear Power Shaker
General Specifications
Series: 4236
Model: Black Thunder
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• Linear Motion
0.13” A(1800), 4.5 “G”
• High “G” Force VGS: Force adjustable to 8.0 “G” maximum
• 32 ft² [2.97 m²] screening area Deck adjustment: Adjustable 0° to 5° uphill
• Simple Design Screens: Three each 36” x 42” pre-tensioned
• Rugged and Reliable panels with Wedgelok fasteners
• Low maintenance Screening Area: 32 ft² [2.97 m²]
• Quick screen panel changes Overall Dimensions: 128” L x 67 5/8” W x 56 7/8” H
3250mm x 1718mm x 1445mm
• Small footprint
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Black Thunder
Linear Power Shaker
VGS Configuration Optional
High “G” force, high volume
Introducing the Black Thunder Linear Power
Shaker, This high “G” force linear shaker
is capable of up to 8.0 “G”. FSI has designed
this unit to achieve optimum performance
and to answer our customers needs
formore screening area but with a small
foot print. Processing rates vary with slurry
content, percent solids and viscosity.
Simplicity in design
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
010202
Home < Print Exit
Black Thunder
Linear Power Shaker
General Specifications
Series: 4236
Model: 3P
Motors: Two each 1800, 1500 or 1200 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.13" A (1800), 0.156” A (1500),
0.23” A (1200), 4.5 “G”
VGS: Force adjustable to 8.0 “G” maximum
Lower Deck adjustment: Adjustable 0° to 5° uphill
Screens: Three each 36" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 32 ft2 [2.97 m2]
Overall dimensions: 128" L x 67 5/8" W x 56 7/8" H
3250mm x 1718mm x 1445mm
General Specifications
Series 5000B CD
VGS ™ Linear Cuttings Drier
General Specifications
Series: 5000
Model: B4
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 4.5 “G”
• 34 ft² screening area VGS: Force adjustable to 7.0 “G” maximum
• Simple Design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and Reliable Screens: Four each 29” x 42” pre-tensioned
• High Performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 34 ft² [3.14 m²]
• Quick screen panel changes Overall Dimensions: 129 1/2” L x 67 5/8” W x 52” H
3289mm x 1718mm x 1320mm
• Small footprint
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series 5000B CD
VGS™ Linear Cuttings Drier
VGS Configuration Optional
High “G” force, high volume
Introducing the 5000B CD, FSI’s latest ad-
vance in high “G” force, high volume linear
cuttings driers. FSI has designed this unit
to achieve optimum performance, allowing
you to recover up to 80% of the solids cur-
rently reporting to your reserve pit. The
5000B CD will recover silts and ultra-fine
sands, provide solids in a consistently
stackable and conveyable form and re-
quires no expensive chemicals or polymers.
Even in the most challenging applications,
the 5000B CD achieves consistently high
Series 5000B CD
VGS™ Linear Cuttings Drier
General Specifications
Series: 5000
Model: B4
Motors: Two each 1800 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.13" A, 4.5 “G”, 20 Hz
VGS: Force adjustable to 7.0 “G” maximum
Screens: Four each 29" x 42" pretensioned
panels with Wedgelok™ fasteners
Screening area: 33.8 sq. ft. [3.14 sq. m.]
Overall dimensions: 129 1/2" L x 67 5/8" W x 52" H
General Specifications
Series 50 B
Linear Power Shaker
General Specifications
Series: 50
Model: B
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 5.0 “G”
• 16.9 ft² [1.57 m²] screening area VGS: Force adjustable to 7.0 “G” maximum
• Simple design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and reliable Screens: Two each 29” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 16.9 ft² [1.57 m²]
• Quick screen panel changes Overall Dimensions: 88 1/2” L x 68 7/8” W x 42 7/8” H
2248mm x 1747mm x 1087mm
• Small footprint
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series 50B
Linear Power Shaker
VGS Configuration Optional
High “G” force, high volume
Introducing the 50 B, FSI’s latest advance
in high “G” force, high volume linear motion
shakers. FSI has designed this unit to achieve
optimum performance. Even in the most chal-
lenging applications, the 50 B achieves con-
sistently high throughput. Processing rates
vary with slurry content, percent solids and vis-
cosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
protection. Each of the unit’s two
pretensioned screen panels can be installed
The FSI Difference or replaced independently of each other.
Replacement takes less than three minutes
• High “G” force and requires only a light- to medium-weight
hammer.
• 16.9 ft2 [1.57 m2] screening area
• Simple design Lowest maintenance cost
Simplicity pays off. FSI equipment have the
• Rugged and reliable lowest operational and maintenance costs in
• High performance the industry. Routine maintenance is
extremely minimal. Simple visual checks of
• Low maintenance screen panels, deck rubbers, inflation of air
• Quick screen panel changes spring assemblies, and quarterly torque checks
of the vibrator motor bolts are all that is
• Small footprint required. Fluid Systems, Inc. keeps you on-line
for decades of trouble-free performance. It’s
• No lubrication that simple!
• Low noise
Series 50B
Linear Power Shaker
General Specifications
Series: 50
Model: B
Motors: Two each 1800, 1500 or 1200 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.13" A (1800), 0.156” A (1500),
0.23” A (1200), 5.0 “G”
VGS: Force adjustable to 7.0 “G” maximum
Deck adjustment: Adjustable 0° to 5° uphill
Screens: Two each 29" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 16.9 ft2 [1.57 m2]
Overall dimensions: 88 1/2" L x 68 7/8" W x 42 7/8" H
2248mm x 1747mm x 1087mm
General Specifications
Series 500 B
Linear Power Shaker
General Specifications
Series: 500
Model: B
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 5.0 “G”
• 25.4 ft² [2.36 m²] screening area VGS: Force adjustable to 8.0 “G” maximum
• Simple design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and reliable Screens: Three each 29” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 25.4 ft² [2.36 m²]
• Quick screen panel changes Overall Dimensions: 117 5/8” L x 73 5/8” W x 43” H
2988mm x 1870mm x 1091mm
• Small footprint
Weir Height: 29” [737mm]
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series 500B
Linear Power Shaker
VGS Configuration Optional
High “G” force, high volume
Introducing the 500 B, FSI’s latest advance
in high “G” force, high volume linear motion
shakers. FSI has designed this unit to achieve
optimum performance. Even in the most chal-
lenging applications, the 500 B achieves
consistently high throughput. Processing rates
vary with slurry content, percent solids and vis-
cosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
The FSI Difference vibration eliminates the need for hearing
protection. Each of the unit’s three
pretensioned screen panels can be installed
• High “G” force or replaced independently of each other.
Replacement takes less than three minutes
• 25.4 ft2 [2.36 m2] and requires only a light- to medium-weight
screening area hammer.
041501
Home < Print Exit
Series 500B
Linear Power Shaker
General Specifications
Series: 500
Model: B
Motors: Two each 1800, 1500 or 1200 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A (1200), 0.156” A (1500),
0.13” A (1800), 5.0 “G”
VGS: Force adjustable 0 - 8.0 “G” maximum
Deck adjustment: Adjustable 0° to 5° uphill
Screens: Three each 29" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 25.4 ft2 [2.36 m2]
Overall dimensions: 117 5/8" L x 73 5/8" W x 43" H
298.8 cm L x 187 cm W x 109.1 cm H
Weir Height: 29” [73.7 cm]
General Specifications
Series 5000 B
Linear Power Shaker
General Specifications
Series: 5000
Model: B
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 5.0 “G”
• 34 ft² [3.16 m²] screening area VGS: Force adjustable to 7.0 “G” maximum
• Simple design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and reliable Screens: Four each 29” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 34 ft² [3.16 m²]
• Quick screen panel changes Overall Dimensions: 146 7/8” L x 61” W x 54 5/8” H
3729mm x 1549mm x 1967mm
• Small footprint
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series 5000B
Linear Power Shaker
VGS Configuration Optional
High “G” force, high volume
Introducing the 5000B, FSI’s latest advance
in high “G” force, high volume linear motion
shakers. FSI has designed this unit to achieve
optimum performance. Even in the most chal-
lenging applications, the 5000B achieves
consistently high throughput. Processing
rates vary with slurry content, percent solids
and viscosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
Series 5000B
Linear Power Shaker
General Specifications
Series: Series 5000
Model: B
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23" A (1200), 0.156” A (1500),
0.13” A (1800), 5.0 “G”
VGS: Force adjustable to 7.0 “G” maximum
Deck adjustment: Adjustable 0° to 5° adjustable
Screens: Four each 29" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 34 ft2 [3.16 m2]
Overall dimensions: 146 7/8" L x 61" W x 54 5/8" H
3729mm x 1549mm x 1967mm
General Specifications
Series 500 BSBS
Linear Power Side-By-Side Shakers
General Specifications
Series: 500
Model: BSBS
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 4.5 “G”
• 50.8 ft² [4.72 m²] screening area VGS: Force adjustable to 8.0 “G” maximum
• Simple design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and reliable Screens: Six each 29” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 50.8 ft² [4.72 m²]
• Quick screen panel changes Overall Dimensions: 123 1/2” L x 161 5/8” W x 51 3/4” H
3137mm x 4013mm x 1315mm
• Small footprint
Weir Height: 35 7/8” [910mm]
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series 500BSBS
Linear Power Side-By-Side Shakers
VGS Configuration Optional
High “G” force, high volume
Introducing the 500BSBS, FSI’s latest advance
in high “G” force, high volume linear motion
shakers. FSI has designed this dual-shaker unit
to achieve optimum performance. Even in the
most challenging applications, the 500BSBS
achieves consistently high throughput. Pro-
cessing rates vary with slurry content, per-
cent solids and viscosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
protection. Each of the unit’s six pretensioned
The FSI Difference screen panels can be installed or replaced
independently of each other. Replacement
• High “G” force takes less than five minutes and requires only
a light- to medium-weight hammer.
• 50.8 ft2 [4.72 m2] screening area
• Simple design Lowest maintenance cost
Simplicity pays off. FSI equipment have the
• Rugged and reliable lowest operational and maintenance costs in
• High performance the industry. Routine maintenance is
extremely minimal. Simple visual checks of
• Low maintenance screen panels, deck rubbers, inflation of air
spring assemblies, and quarterly torque checks
• Quick screen panel changes of the vibrator motor bolts are all that is
• Small footprint required. Fluid Systems, Inc. keeps you on-line
for decades of trouble-free performance. It’s
• No lubrication that simple!
• Low noise
Series 500BSBS
Linear Power Side-By-Side Shakers
General Specifications
Series: 500
Model: BSBS
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.13" A (1800), 0.156” A (1500),
0.23” A (1200), 4.5 “G”
VGS: Force adjustable to 9.0 “G” maximum
Deck adjustment: Adjustable 0° to 5° uphill
Screens: Six each 29" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 50.8 ft2 [4.72 m2]
Overall dimensions: 123 1/2" L x 161 5/8" W x 51 3/4" H
3137mm x 4013mm x 1315mm
Weir Height: 35 7/8” [910mm]
Printable Version
Home < > Print Exit
RUMBATM 201-ST
Single Tandem Shaker
Improved penetration rate
A shale shaker, the first removal device deal-
ing with mud from the hole, will discard a
high percentage of larged drilled solids. If
allowed to return to the hole, the bit will re-
drill the same solids causing more drilling
action than required. By removing drill sol-
ids you can increase the rate of penetration.
Exceptional reliability
The RUMBATM Model 201-ST Shale Shaker
provides high volume mud handling
capabilities with fine mesh screens.
Featuring a single deck with dual screens, it
The FSI Difference is designed to meet the most severe drilling
conditions and provides low cost operation
on oil or water based systems. A more
• Weir height of 37” constant flow rate is achieved regardless of
• 60 sq ft of screening area the size or volume of solids.
General Specifications
Series 50/500 B
Linear Power Cascade Unit
General Specifications
Series: 50/500
Model: B
Motors: Four each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 4.5 “G”
• 42.8 ft² [3.92 m²] screening area VGS: Force adjustable to 8.0 “G” maximum
• Simple design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and reliable Screens: Five each 29” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 42.17 ft² [3.92 m²]
• Quick screen panel changes Overall Dimensions: 103 7/8” L x 73 5/8” W x 80 7/8” H
2638mm x 1870mm x 2053mm
• Small footprint
Weir Height: 66” [1678mm]
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series 50/500B
Linear Power Cascade Unit
VGS Configuration Optional
High speed, high volume
Introducing the 50/500 B, FSI’s latest
advance in high “G” force, high volume cas-
cading systems. FSI has designed this unit
to achieve optimum performance. Even in
the most challenging applications, the 50/
500 B achieves consistently high through-
put. Processing rates vary with slurry con-
tent, percent solids and viscosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
protection. Each of the unit’s five pretensioned
screen panels can be installed or replaced
independently of each other. Replacement
takes less than five minutes and requires only
The FSI Difference a light to medium-weight hammer.
Series 50/500B
Linear Power Cascade Unit
General Specifications
Model: Series 50/500B
Weir Height: 66” [1678mm]
Motors: Four each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23" A (1200), 0.156” A (1500),
0.13” A (1800), 4.5 “G”
VGS: Force adjustable to 9.0 “G” maximum
Deck adjustment: Adjustable 0° to 5° uphill (lower)
Screens: Five each 29" x 42" pretensioned
panels with Wedgelok fasteners
Screening area: 42.17 ft2 [3.92 m2]
Overall dimensions: 103 7/8" L x 73 5/8" W x 80 7/8" H
2638mm x 1870mm x 2053mm
General Specifications
Series 500/500 EOL
Elliptical Over Linear Power Cascade
General Specifications
Series: 500ELS/500B3
Model: EOL
Motors: Four each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Elliptical (upper), linear (lower)
• High “G” Force
0.23” A(1200), 0.156” A(1500),
• 50.6 ft² [4.7 m²] screening area 0.13” A(1800), 4.5 “G”
• 68” [1727 mm] weir height VGS: Force adjustable to 8.0 “G” maximum
• Simple design on lower basket
• Rugged and reliable Deck adjustment: Adjustable 0° to 5° uphill
• High performance Screens: Six each 29” x 42” pre-tensioned
• Low maintenance panels with Wedgelok fasteners
Screening Area: 50.6 ft² [4.7 m²]
• Quick screen panel changes Overall Dimensions: 131 7/8” L x 73 5/8” W x 86 3/8” H
• Small footprint 3350mm x 1870mm x 2193mm
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series 500/500EOL
Elliptical Over Linear Power Cascade
VGS Configuration Optional
High volume, high “G” force
Introducing the 500/500 EOL, FSI’s latest
advance in high volume elliptical over linear
cascade units. FSI has designed this unit to
achieve optimum performance. Even in the
most challenging applications, the 500/500
EOL achieves consistently high throughput.
Processing rates vary with slurry content, per-
cent solids and viscosity. Bottom shaker is
capable of “G” forces of up to 8.0G.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
protection. Each of the unit’s six pretensioned
screen panels can be installed or replaced
independently of each other. Replacement
The FSI Difference of each screen panel takes less than two
minutes and requires only a light- to medium-
• Elliptical over linear weight hammer.
• 50.6 ft2 [4.7 m2] screening area Lowest maintenance cost
• Simple design Simplicity pays off. FSI equipment have the
lowest operational and maintenance costs in
• Rugged and reliable the industry. Routine maintenance is
• 68” [1727 mm] weir height extremely minimal. Simple visual checks of
screen panels, deck rubbers, inflation of air
• Low maintenance spring assemblies, and quarterly torque checks
of the vibrator motor bolts are all that is
• Quick screen panel changes required. Fluid Systems, Inc. keeps you on-line
• Small footprint for decades of trouble-free performance. It’s
that simple!
• No lubrication
• Low noise
Series 500/500EOL
Elliptical Over Linear Power Cascade
General Specifications
Series: 500ELS/500B3
Model: EOL
Motors: Four each 1800, 1500 or 1200 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Elliptical (upper), linear (lower)
0.13" A (1800), 0.156” A (1500),
0.23” A (1200), 4.5 “G”
VGS: Force adjustable to 8.0 “G” maximum
on lower basket
Deck adjustment: Adjustable 0° to 5° uphill (lower)
Screens: Six each 29" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 50.6 ft2 [4.7 m2]
Overall dimensions: 131 7/8" L x 73 5/8" W x 86 3/8" H
3350mm x 1870mm x 2193mm
eLiminates
• De-silter cones • High maintenance cost
• De-sander cones • Additional equipment
• Double header cleaners • Excessive cone plugging
• Extra pumps and piping • Undesired solids
General Specifications
Series 5000 gMAX ™ the eLIMINATOR™
Linear Power Mud Cleaner
General Specifications
Series: 5000
Model: B4
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
aDvantages Motion: Linear, 0.23” A(1200), 0.156” A(1500),
0.13” A(1800), 4.5 “G”
• Finer, sharper particle VGS: Force adjustable to 7.0 “G” maximum
separations at high capacities
Deck adjustment: Adjustable 0° to 5° uphill
• Fewer cyclones needed for Screens: Four each 29” x 42” pre-tensioned
optimal performance panels with Wedgelok fasteners
• Easy maintenance Screening Area: 34 ft² [3.14 m²]
Overall Dimensions: 131 1/8” L x 67 5/8” W x 82 1/2” H
eLiminates 3331mm x 1718mm x 2096mm
• De-silter cones • High maintenance cost
• De-sander cones • Additional equipment
• Double header cleaners • Excessive cone plugging
• Extra pumps and piping • Undesired solids
Printable Version
Home < > Print Exit
aDVANTAGES
The cyclone inlet and cylindrical sections
have been modified to minimize
turbulence and wear, but still have the
• Finer, sharper particle separations capability to operate at much higher
capacities than our competitor’s
at high capacities cyclones.
• Fewer cyclones needed for optimal The gMAX™ Super Cyclone produces the
performance performance you need with large
diameter cyclones while operating at
• Easy maintenance lower pressures!
eLIMINATES
• De-silter cones • High maintenance cost
• De-sander cones • Additional equipment
• Double header cleaners • Excessive cone plugging
• Extra pumps and piping • Undesired solids
General Specifications
Series 20L SSR10HIL-14
Linear Power Mud Cleaner
General Specifications
Series: 20L
Model: SSR10HIL-I4
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 4.5 “G”
• 16.9 ft² [1.57 m²] screening area VGS: Force adjustable to 8.0 “G” maximum
• Simple Design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and Reliable Screens: Two each 29” x 42” pre-tensioned
• High Performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 16.86 ft² [1.57 m²]
• Quick screen panel changes Overall Dimensions: 89 5/8" L x 53" W x 87 3/8" H
• Small footprint 2276mm x 1346mm x 2218mm
• No lubrication Cone capacities: 1000 GPM total [227.1 m³/hr]
• Low noise
• High volume 4” hydrocyclones
Printable Version
Home < > Print Exit
General Specifications
Series 5000BDHC
Double Header Mud Cleaner
General Specifications
Series: 5000
Model: B3 DHC
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 4.5 “G”
• 34 ft² [3.16 m²] screening area VGS: Force adjustable to 8.0 “G” maximum
• Simple Design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and Reliable Screens: Four each 29” x 42” pre-tensioned
• High Performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 34 ft² [3.16 m²]
• Quick screen panel changes Overall Dimensions: 131 1/2" L x 65 1/2" W x 105 5/8" H
• Small footprint 3340mm x 1664mm x 2681mm
• No lubrication Header capacity: 2000 GPM total [454.2 m³/hr]
• Low noise
• 2000 GPM [454.2 m³/hr]
Printable Version
Home < > Print Exit
Series 5000BDHC
Double Header Mud Cleaner
VGS Configuration Optional
High “G” force, high volume
Introducing the 5000B DHC, FSI’s latest ad-
vance in high “G” force, high volume linear
motion mud cleaners. FSI has designed this
unit to achieve optimum performance. Even
in the most challenging applications, the
5000B DHC achieves consistently high
throughput. Processing rates vary with slurry
content, percent solids and viscosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
protection. Each of the unit’s four
pretensioned screen panels can be installed
or replaced independently of each other.
The FSI Difference Replacement takes less than three minutes
and requires only a light- to medium-weight
• High “G” force hammer.
Series 5000BDHC
Double Header Mud Cleaner
General Specifications
Series: Series 5000 Mud Cleaner
Model: B3 DHC
Motors: Two each 1800, 1500 or 1200 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.13" A (1800), 0.156” A (1500),
0.23” A (1200), 4.5 “G”
VGS: Force adjustable to 8.0 “G” maximum
Deck adjustment: Adjustable 0° to 5° uphill
Screens: Four each 29" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 34 ft2 [3.16 m2]
Overall dimensions: 131 1/2" L x 65 1/2" W x 105 5/8" H
3340mm x 1664mm x 2681mm
Header capacity: 2000 GPM total [454.2 m3/hr]
General Specifications
Series A50 B
Linear Power ReplaceAbed™
General Specifications
Series: A50
Model: B
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.156” A(1500),
• High “G” Force
0.13” A(1800), 5.0 “G”
• 16.9 ft² [1.57 m²] screening area VGS: Force adjustable to 7.0 “G” maximum
• Easy change-out design Deck adjustment: Adjustable 0° to 5° uphill
• Rugged and reliable Screens: Two each 29” x 42” pre-tensioned
• High performance panels with Wedgelok fasteners
• Low maintenance Screening Area: 16.9 ft² [1.57 m²]
• Quick screen panel changes Overall Dimensions: 70” L x 68 7/8” W x 20” H
1778mm x 1747mm x 508mm
• Little or no welding
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Series A50B
Linear Power ReplaceAbedTM
VGS Configuration Optional
Retro-fit competitors shaker beds
Introducing the A50 B ReplaceAbed TM ,
FSI’s latest advance in high “G” force, high
volume linear motion retro-fit shaker beds.
FSI has designed this unit to replace many
competitor’s shaker beds at a fraction of the
cost of a new machine and achieve optimum
performance. Even in the most challenging ap-
plications, the A50 B ReplaceAbed TM
achieves consistently high throughput. Pro-
cessing rates vary with slurry content, percent
solids and viscosity.
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
The FSI Difference vibration eliminates the need for hearing
protection. Each of the unit’s two pretensioned
• High “G” force screen panels can be installed or replaced
independently of each other. Replacement
• 16.9 ft2 [1.57 m2] screening area takes less than three minutes and requires
• Easy change-out design only a light- to medium-weight hammer.
Series A50B
Linear Power ReplaceAbedTM
General Specifications
Series: Series A50
Model: B
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23" A (1200), 0.156” (1500),
0.13” A (1800), 5.0 “G”
VGS: Force adjustable to 7.0 “G” maximum
Deck adjustment: Adjustable 0° to 5° uphill
Screens: Two each 29" x 42” pretensioned
panels with Wedgelok fasteners
Screening area: 16.9 ft2 [1.57 m2]
Overall dimensions: 70" L x 68 7/8" W x 20" H
1778mm x 1747mm x 508mm
General Specifications
Series 500B 16HIL-I4
Linear Power Mud Cleaner
General Specifications
Series: 500
Model: B3NP16HIL-I4
Motors: Two each 1200, 1500 or 1800 rpm
exp. proof or non-exp. proof available
The FSI Difference Bearings: Permanently sealed and lubricated
Motion: Linear, 0.23” A(1200), 0.13” A(1800),
• High “G” Force
4.5 “G”
• 25.3 ft² screening area VGS: Force adjustable to 9.0 “G” maximum
• High volume hydrocyclones Deck adjustment: Adjustable 0° to 5° uphill
• Up to 1600 gpm Screens: Three each 29” x 42” pre-tensioned
• Rugged and reliable panels with Wedgelok fasteners
• High performance Screening Area: 25.3 ft²
• Low maintenance Overall Dimensions: 104 3/4” L x 73 3/4” W x 90” H
• Quick screen panel changes Cone Capacities: 100 GPM each - 1600 GPM total
• No lubrication
• Low noise
Printable Version
Home < > Print Exit
Exceptional reliability
Simplicity is the essence of every FSI design.
Permanently sealed vibrators make lubrication
systems totally unnecessary. Low 80-dB motor
vibration eliminates the need for hearing
protection. Each of the unit’s three
pretensioned screen panels can be installed
or replaced independently of each other.
Replacement takes less than five minutes and
requires only a light- to medium-weight hammer.