flowserve.com
Lead
impeller offers predictable,
CTEM a
Fen
aT
Predictable, Repeatable Performance
Unike open impellers, Durco reverse vane impellers offer
repeatable performance afer wear and impeller adjustment.
Reverse Vane Impellers
‘A teverse vane impeller has only one set of pumping vanes
and one crtcal tolerance. This single tolerance ~ between the
impeller andthe rear cover ~establ shes:
+ Performance
+ Efficiency
+ Seal chamber pressure
+ Thrust loads
‘Wear between the reverse vane impeller and the rea cover
‘causes axial thrust loads to decrease as the seal chamber gap
widens. At the same time, seal chamber pressure increas
By adjusting the setting ofthe reverse vane impeller against
its single tolerance locaton, the original seal chamber pres
sure and axial thrust loads are re-established. The result is.
consistent, like-new performance
Open Style impelter
‘Atront vane open style pellet has two sets of
pumping vanes and two erica tolerance locations
+ The front vane clearance to the casing establishes:
~ Performance
= ciency
‘+ The pump out vanes clearance to the rear cover
establishes:
= Seal chamber pressures and sealife
~ Thrust loads and bearing lite
‘Wear causes aval thrust loads and seal chamber
pressure to increase asthe seal chamber gap widens.
But the impeller cannot be adjusted to both tolerance
locations atthe same time. Seal chamber pressure
and bearing loads increase after each adjustment
Performance is diminished and seal and bearing Me
suffers as a result,
Consistent, Lik
gw Repoatable Performance
gaa acl Thus
1. ees Repo
‘el amber PresureiboalTho
Erfocts of Wear & Impeller Readjustment
Diminished Performance
tA Tt
‘el aber Psa
Effects of Wear & Impeller Readjustment