Sie sind auf Seite 1von 2

Installation Requirements and

Announcement of Readiness for Installation

mercur®

Address

The device will be installed by service technician(s) employed with or authorized by


Analytik Jena.
It is strictly necessary that all persons supposed to operate the device attend the
introduction in the device given by the service technician.

Please confirm that the requirements for the installation of the device have been met, and
return the corresponding announcement to us. If necessary, we will readily send you
information that is more detailed.

By signing the announcement, you confirm that all requirements for the complete
installation of the device will have been met by the time our service technician arrives.
If this should not be the case and thus additional costs arise (e.g. by a repeated visit), we
take the liberty of charging these costs to your account according to our price list.

The following requirements for the troublefree installation of the mercur® have to be
met by the customer:

Installation requirements mercur 1/2 Version 2004-07-30


Ensured
Requirements
Yes No
1300 x 800 mm (PC version)
Bench space
800 x 600 mm (stand-alone version)
Bench space/ Load capacity: min. 60 kg
installation site To be avoided:
Influence of strong mechanical vibrations
Magnetic fields
The device is to be connected to a single-phase a.c. mains.
230V + 10 %
Power 50/60 Hz
requirements Power consumption: 480 VA
Fuse protection: 16 A
Cable: 1.5 m long x
There are no specific requirements for the exhaust system.
Exhaust system The residual gas is directed in the device through activated-carbon filters
that totally adsorbs Hg.
+ 10 ... 35 °C
Ambient conditions
max. 90% relative humidity at 30o C
Argon or helium > 4.8
Gas supply Inlet pressure: 6 bar
Required rate of gas supply: max. 60 l/h
Gas connections Hose connector for hoses of 4 mm ID
Warning notes Observe general industrial safety regulations

Name customer
Company City
(in block letters please)

Customer No. Customer's signature Date (MM/DD/YYYY)

Installation requirements mercur 2/2 Version 2004-07-30

Das könnte Ihnen auch gefallen