Beruflich Dokumente
Kultur Dokumente
S.NO Description
B DOORS
C WALL FINISHES
D MISCELLANEOUS
E FALSE CEILING
F FURNITURE
G PARTITION
TOTAL
DISCOUNT
VAT
SERVICE TAX
GRAND TOTAL
S.No Description
Quantity Unit Rate Amount
A Civil works
1 PARTITION WALL WORKS
1 Half brick partition walls qro sqm
Providing and laying 4½" thick half brickwork in partition walls, parapets, architectural
elements etc., with well burnt 1st class table molded, good quality approved bricks in 1:4
Cement Mortar (1 Cement : 4 Coarse Sand by volume) including providing 2 Nos., 6 mm
dia., MS round bars at every 4th course, including soaking the bricks in water adequately
and drying, scaffolding, curing, rubbing the surface, raking out the joints etc., complete as
directed and specified for walls, parapet, platform supports etc., at all floor levels.
Providing and laying in position vitrified tiles of min size 600 x 600 mm of approved shade
and make, over a base of 3/4" thick 1:3 Cement Plaster (1 Cement : 3 Coarse Sand),
including laying tiles to approved pattern, applying Laticrete epoxy grout, providing spacers
3mm wide, cleaning, curing etc. complete at all levels; i/c mitering edges and providing PVC
a 1112.00 sqm 0
edge trims at corner edges. Please note that no separate payment for wall plastering shall
be made for areas where ceramic tile dado has been specified, since this rate is inclusive of
the plaster base, as mentioned above. Skirting fixed flush to the wall. Rate to include
chasing, fixing, and making good the wall and plaster as also making 6x6 groove in plaster.
Same as above but as 100 mm high skirting fixed flush to the wall. Rate to include chasing,
b 196.00 rm 0
fixing, and making good the wall and plaster as also making 6x6 groove in plaster.
Providing and laying in position in skirting/dado glazed ceramic tiles of approved shade and
make, over a base of 3/4" thick 1:3 Cement Plaster (1 Cement : 3 Coarse Sand), including
laying tiles to approved pattern, applying Laticrete epoxy grout, providing spacers 3mm
wide, cleaning, curing etc. complete at all levels; i/c mitering edges and providing PVC edge
86.00 sqm 0
trims at corner edges. Please note that no separate payment for wall plastering shall be
made for areas where ceramic tile dado has been specified, since this rate is inclusive of
the plaster base, as mentioned above. Skirting fixed flush to the wall. Rate to include
chasing, fixing, and making good the wall and plaster as also making 6x6 groove in plaster.
100 dia core cutting to be carried out in the site based on the location of the waste water
drain outlets. The location to be marked and approvel to be sought from the basebuilder 12 nos 0
prior to the commincement of the process of core cutting- Hilti core cutting system
Aerocon panel- 75mm thick- 4.7 m high, A sandwich panel of two fiber-reinforced
cement sheets enclosing a light weight concrete core composed of Portland cement and
Fly-ash. Fully cured at factory,with a Unique “Tongue and Groove” jointing system. Rate to
4 include patty and two coats of acrylic emulsion paint finish as per approved shade. 182.46 sqm 0
Rate to include basic ms structure anchor bolts, scaffolding and erection. Rate to also
include ms frame work around doors, windows and wall openings for services etc.
B Doors
1 Frameless toughened glass doors
a Frameless toughened glass door with 12mm thick toughened glass fixed to either the
laminated plywood/ gypsum or glass partition or a civil wall. Rate to include floor spring
2 nos 0
(dorma or equivalent) SS handles 2' long (Kich or equivalent) all complete.Size 1000 x
2400 mm
b Same as above - Size 900 x 2400 mm qro nos
c Same as above but double door 1800x2400 with 2 nos 900x2400 panels qro nos
2 Fire Doors
Fire doors - As per proprietry specifications; 1 hour fire rated door. 1000mm x
2400mm(Shakthimet or equivalent) With vision panel and hardwares as per qro nos
manufacturer's standards.
3 Flush doors- laminate finish
Solid flush doors 30 mm thick - finished with laminate as per drg. Rate to include all
hardware etc. all complete with Door closer (dorma or equiv) with a 200 mm x300 mm
vision panel. With 100 mm x 45 mm + 15 mm rebate solid beech wood frame.
C Wall finishes
1 Altek / Birla Putty
a Application of Altek / Birla or equivalent Putty to wall surfaces. Putty not to be applied on
1020 sqm 0
those surfaces which are getting panelled. All wall surfaces to be marked for putty work and
b approval
Same as taken
above but for ceilings. qro sqm
2 Plastic Emulsion painting
Supply and application of washable interior grade Dulux 3-in-1 pastic emulsion paint on
walls with 1 coat of wallprimer and 2 or more coats of plastic emulsion paint as per
manufacturer's specifications etc. all complete. All painting final coats to be done after 1020 sqm 0
removal of face plates of switch boards in coordination with the electrical contractor and
face plates to be fixed only after satisfactory completion of painting.
b Same as above but for ceilings. 1095 sqm 0
3 Texture Paint
Providing and applying of texture paint - Asian royale play or equivalent as per 45 sqm 0
manufacturers specifications.
4 Enamel paint
P&F applying semi gloss enamel paint on walls as per manufacturer's specifications (Asian 108 sqm 0
paints or equivalent)
5 POP punning
a Supply and application of POP punning to a thickness of 10-12 mm. Application after
cleaning the wall surface to get a seamless finish. Application to be done as per qro sqm
manufacturers' specifications etc. all complete.
b Same as above but for ceilings qro sqm
6 Gypsum plaster
a Providing and applying of VANS Gypsum Plaster and Gypbond for ceiling after grinding and
preparing the surface of application. 1095 sqm 0
b Providing and applying of VANS Gypsum Plaster and Gypbond for proposed civil block
walls 200 sqm 0
D Miscellaneous
1 Panelling - Direct on Column/ Walls
Panelling on wall / column - Laminated finish - Providing and fixing with 12mm plywood
fixed directly on wall or column finished with1m laminate as per design. Rate to include
150 sqm 0
making grroves in laminate as per design and details. (Basic rate of laminate Rs. 50/sft).
Rate to include providing PVC edge
2 Panelling - With framework on Column/ Walls- circular framework and panelling
around columns as per the layout plan.
Paneling on columns - Laminated finish - Providing and fixing with 12mm MDF over
framework of Aluminium sections of 50x50 mm directly on columns finished with 1m 82 sqm 0
laminate as per design / drawing all complete. Gap of boxing to be 50 mm.
3 Panelling - With Laquered glass
Same as item 2 but with 6mm "Planileque" lacquered glass (St. Gobain) over 12mm
plywood backing on any one side and laminate/ softboard finish on the other sies. Rate to
include fixing either on gypsum or laminated partitions or directly on walls. Rate to include 13 sqm 0
providing Al. "U" channel 6x6mm all around the glass when fixed in partition and 12x18
Brushed SS U channel when fixed directly on wall.
4 Softboards
Softboards -Providing and fixing pin up boards with 12mm thick soft board panels with 6mm
commercial plywood backing and covered with approved fabric (cost not more than Rs
150/=per mt). A 6mm thick melamine polished TW lipping to be fixed around the corners.
The pinup board need to be fixed either on the wall or over the partition. Rate to include 21 sqm 0
providing Al. "U" channel 6x6mm all around the glass when fixed in partition and 12x18
Brushed SS U channel when fixed directly on wall.
5 White Boards
White boards -Magnetic type with 3M coated film on surface - Rate to include providing 5 sqm 0
Aluminium trim all around.
6 Architectural film
Providing and fixing of 3M dusted crystal film on glass as per design and pattern. Rate to 24 sqm 0
include shape cutting as per design.
7 Pelmets
Providing and fixing pelmets with 18mm ply painted from inside.
Size 300 mm deep and 300 mm wide 67 rm 0
8 Boxing
Providing and fixing Plywood boxing in locations as per drg. with 8mm plywood over
necessary Al. framework 50x50 in size finished with 1mm laminate. Rate to include
85 sqm 0
providing grooves, shapes all as per drg., hardware all complete. Surface area of panelling
around the boxing will be measured for payment.
9 Housekeeping
S.No Description
Lumpsum charges for hosuekeeping of site in the last 30 days of the project. During this
period, all debris to be cleared from site daily and proper cleaning including . sweeping,
dusting wherever possible and mopping to be included. To include thorough cleaning of 45 days 0
existing windows/ glazings, towards balcony and towards shaft all complete. Cleaning of
window includes frames and glass.
10 Wall paper
Wall paper - Application of wall paper as per approved sample. Rate to include surface
preparation abd application as per manufacturers standards. (Basic Rate Rs.150/- sqft) 36 sqm 0
11 Vinyl flooring
Vinyl flooring - Providing and laying in position 'Armstrong' or equivalent vinyl flooring of
3mm thickness (basic rate not less than 80 Rs /sft) as per manufacturer's sepcifications.
Tiles/ Planks may be used. Shade as per approved sample. Rate to include surface
preparation, levelling using POP if required and covering of the floor by plastic sheet 45 sqm 0
securley and re covering it as required. Rate to include final cleaning before handover. Rate
to also include providing suitable brushed SS transition profile as required and approved by
the architects.
12 Wooden Flooring
a Wooden floor - Providing and laying in position laminated wooden floor as per approved
colour. Rate to include surface preparation, levelling using POP if required and covering of
the floor by plastic sheet securley and re covering it as required.(Basic Rate Rs.140/- sqft ). 23 sqm 0
Rate to include transition profiles as per manufacturer's standards fixed all along the edges.
Rate to also include 50mm high matching skirting.
b Same as above but with Engineered wooden floor as per approved colour.(Basic Rate 6 sqm 0
Rs.275/- sqft )
13 Dirt Matting
a Dirt matting - From '3M' or equivalent as per approved sample.3M or equivalent- medium 27 sqm 0
b duty
Dirt matting - From '3M' or equivalent as per approved sample.3M or equivalent- heavy duty 14 sqm 0
14 Mirrors 6mm - For toilets as per drg. Rate to include 12mm backing ply, fixing with 3m 37 sqm 0
double side tape, laminated or polished wooden frames as reqd.
15 Aluminium Skirting
Providing and fixing proprietary Anodized Aluminum Skirting of 100mm high, as per details 75 Rm 0
and Architect's approval
16 Trap doors
Providing and fixing Trap doors made with 18mm waterproof plywood with Aluminum
support structure all around and one intermediate section. Plywood to be lipped with TW
lipping and finished with 1mm laminate on ply and duco paint on lipping. Rate to include
either concealed or cut hinges ( 2 pairs) dead lock, concealed aldrop, recessed handles etc 12 sqm 0
all complete. Additional support in the false ceiling ot take the weight of the trap doors also
to be included in the rate.
17 Closure of service openings in wall
S.No Description
To close wall openings with mdf board of 12mm thickness and to accommodate services
like ducts of specific sizes and sealed and finished with mdf beading all around the opening 32 sqm 0
made in the board. To include finish with PE paint as well.
18 Aluminium L profile
Providing and fixing of Aluminium L profile of size 12mmx12mm on top open edge of 245 rmt 0
laminated wall panelling.
19 Boxing for Stretch ceiling
Providing and fixing 350 mm deep boxing in locations as per drg. With 12mm mdf over
necessary framework of Aluminium sections of 50x25mm with painted finish as per shape
23 sqm 0
all as per drg. with hardware all complete. Reflected ceiling area of boxing will be measured
for payment.
a Same as above but with paint finish instead of laminate- For stretch ceiling. 4 sqm 0
b Same as above but with 12mm com ply and aluminium frame and gyp board on top on both 3 sqm 0
sides
c Same as above but with 12 water proof ply. 5 sqm 0
20 Acoustic board panelling
Providing and fixing Tranquil Ecocore acoustical board 9mm in thickness as per 65 sqm 0
manufacturers standards on to a ply backing at various places of application at the site.
21 Providing and fixing Stainless steel transition profile between carpet flooring and Hard
flooring area along the periphery of all cabins and workstation areas in the office space, the
45 rmt 0
Aluminium trim to be of 32 mm in width and to serve as a leveller between top floor finishes.
The trim to have brushed finish as per approved sample.
22 Providing and fixing of Aluminium hat profile of size 10mm in all kinds of partiion walls in 127 rmt 0
between the soft board, glass board and laminated panelling.
23 Providing and fixing of column pvc edge banding with Rehau or equivalent make. The edge 120 rmt 0
band is to be as per approved shade.
24 Aluminium framework of 1200 x 1200 mm spacing with 50 x 50 mm sections as per
standards to be suspended with treaded rods and gripple wire for the purpose of supporing
327 sqm 0
a grid ceiling system in specific areas, The height of suspension is to be a max of 1500mm
from the true ceiling.
25 Tensile fabric ceiling in Library.
Tensile membrane fabric for false ceiling at cafeteria suspended from true ceiling as per
details mentioned in the drawings provided. The tensile fabric to have a thickness of
700gsm PVC coated fabric and to be Ferrari or Mehler make or equivalent- Color to be as 37 sqm 0
per approved sample Fabric to be susped with treaded rods and tensile steel ropes as per
fabrication details.
3 Plank ceiling
Providing and fixing in true horizontal level false ceiling grid of 15mm Suprafine XL grid
system manufactured by M/s. Armstrong World Industries (India) Pvt. Ltd using hot dipped
galvanized steel section, exposed surface chemically cleaned capping prefinished in
backed polyester paint wall angle of size 3000x19x19mm used in periphery of the ceiling
fixed to the wall/partition/RCC column/band walls with the heip of screws at 600mm c/c.
Main runner of size 3600x15x38mm suspended at 1200mm c/c by using 2.5mm dia G.I.
wire hanger securely fixed to the structural soffit of RC slab by using 6mm anchor fastener 45 sqm 0
at every 1200mm(max) and 1200mm long cross tee of size 15x38mm to be interlocked
between in main runner at 300mm c/c(max) to form grid of 1200x300mm and finally laying
Dune Plank Bev.Tegular tiles of size 1200x300x16mm(RH 99,NRC 0.50) in the Middle
portion and Placing Dune Sq.Edge tile of size 300x150x16mm in side Portion.
F Furniture
1 Running Tables - circular counter
Running counter table tops - laminated finish; 900mm high with 40mm edge with painted /
polished TW beading. Table edge to be slightly curved with PVC edge banding as per drg.
Intermediate supports at 900 c/c made with 18mm plywood laminated with 1mm laminate 41 sqm 0
on both sides and edges lipped with PVC edge banding are to be provided. Plan Area of the
table to me measured for payment
2 Storage - Laminated
S.No Description
a Providing and fixing 750 high Storage of 450mm depth made with 18 mm MR grade
plywood. The external surfaces of plywood to have laminate finish and inside with enamel
paint. Rate to include 100mm high laminated skirting and all hardware, good quality SS
handles, multipurpose lock etc. all complete. All exposed edges of plywood to be lipped with 11 sqm 0
6mm / 4mm TW lipping. Rate to also include duco paint to the TW members all complete.
b Providing and fixing of Sliding storage with aluminium channel track set and conceled 12 sqm 0
handles, to be 900 mm high and 450 mm deep storage units.
11 Light steel works - vertical drop panels in front of the food stalls for signage and
display panels - 1200 mm high(For detaild refer to the tender drawings)
Providing, fabricating and fixing and position all MS light steel works with standard sections
of flats, squares, bars, rounds etc., as per detailed drawings, i/c welding, filing of joints,
fixing screws/grouting in position all complete. Rate to include straightening, cutting to
required sizes, fixing in line and level at all levels, bolting and welding of joints and painting
with 2 or more coats of synthetic enamel paint over red oxide primer. Rate to include 1.5 MT 0
staging, scaffolding, making layouts, fabrication drawings etc. all complete The
grilles/louvers to weigh not more than 3 Kg per Sft. Net covered area in elevation shall be
measured and paid for.
12 1200 high 50mm thick free standing metal wall parition with Ms section frame work and
metal sheet with perforations as a cladding element on the two sides of the frame work. The
33.0 sqm 0
parititon to be integrated with the light fitting pole and anchored to the floor with anchor bolts
as per standards.
13 Structural Steel works
Supplying, fabricating and erecting in position structural steel works in columns, beams,
portals, runners, roof structural elements, trusses, purlins, bracings, sag rods, platforms,
decking, railings, catwalks, ladders, stairs, hangers, monorails, jibcranes etc. as per design,
drawings and details and as per specifications. Rate to include consumables such as bolts,
nuts, washers, surface preparation as per specifications, painting with one coat of zinc
chromate primer and 2 or more coats of enamel paint one at shop level and one after
erection and alignment. (VSP/SAIL/VKG)