Beruflich Dokumente
Kultur Dokumente
2. If 𝑋(𝑘) = {10 + 2𝑗, −2 + 5𝑗, 1 + 4𝑗. 8 + 6𝑗, 5, 𝐴, 𝐵, 𝐶} is the DFT of a real sequence, then
A,B,C are CO1
a) 8 + 6𝑗, 1 + 4𝑗, −2 + 5𝑗
b) −2 + 5𝑗, 1 + 4𝑗, 8 + 6𝑗
c) 8 − 6𝑗, 1 − 4𝑗, −2 − 5𝑗
d) −2 − 5𝑗, 1 − 4𝑗, 8 − 6𝑗
3. If 𝑥[𝑛] = {1,2,3,4} and periodic then 𝑥1 [𝑛] = {1,4,3,2}is related to x[n] as CO1
a. 𝑥[𝑛 − 3]
b. 𝑥[𝑛 + 3]
c. 𝑥[𝑛 − 1]
d. 𝑥[−𝑛]
4. Frequency domain representation of an aperiodic DT time domain signal is ______ in nature
a. Continuous and periodic CO1
b. Continuous and aperiodic
c. Discrete and periodic
d. Discrete and periodic
5. To avoid frequency domain aliasing in DFT CO1
a. 𝐹𝑠 ≥ 2𝑓𝑚
b. 𝐹𝑠 ≤ 2𝑓𝑚
c. 𝑁 ≥ 𝐿
d. 𝑁 ≤ 𝐿
6. How to find the output of a linear filter for real time input signal using DFT efficiently
a. Overlap and add /Overlap and save method CO1
b. Direct periodic convolution
c. Direct Linear convolution
1
7. 𝑦(𝑛) = 𝑥(𝑛) + 8 𝑥(𝑛 − 1)is CO1
a. A recursive system
b. A non-recursive system
c. IIR system
8. In a 6-point Split radix FFT with N=2.3, What does 2 and 3 stand for CO1
a. 2 stages of 3 input DFT followed by 3 stages of 2 input DFT
b. 3 stages of 2 input DFT followed by 2 stages of 3 input DFT
c. 2 stages of 3 input DFT followed by 2 stages of 3 input DFT
d. 3 stages of 2 input DFT followed by 3 stages of 2 input DFT
9. An “in place” FFT will save ------------- while implementing DFT CO1
a. Multipliers
b. Adders
c. Computations
d. Memory
10. FFT of u[n] for N=4 is CO1
a. 𝑋[𝑘] = {1,0,0,0}
b. 𝑋[𝑘] = {1,1,1,1}
c. 𝑋[𝑘] = {1,0,1,0}
d. 𝑋[𝑘] = {4,0,0,0}
𝑧 −1 −0.4
11. 𝐻1 (𝑧) = 1−0.4𝑧 −1 behaves like an CO3
a. Low pass filter
b. Band pass filter
c. Notch filter
d. All pass filter
12. An FIR filter has the following property that all of its zeros lie inside the unit circle then
∠𝐻(0) − ∠𝐻(𝜋) = CO3
a. π
b. Between 0 and π
c. 0
d. Neither 0 nor π
13. All FIR filters are Linear phase filters CO3
a. True
b. False
14. Type III Linear phase filter can behave like an CO3
a. Low pass filter
b. High pass filter
c. Band pass Filter
d. All of the above
15. The location of compulsory zero in a Type II linear phase filter is at CO3
a. z = -1
b. z=+1
c. z=-1 and z=+1
d. No compulsory zeros