Beruflich Dokumente
Kultur Dokumente
Users Manual.
For Bluetooth
phones and
CPT 9000.
A mobile phone lets you stay in touch wherever you go. This Owner's Manual will help you
learn how to easily operate your mobile phone using features built into your vehicle.
We wish you an enjoyable driving experience.
Contents
Notes 13 Phone book
2 Using this Owner's Manual 13 Dialing from the phone book
2 Symbols used 14 Adding digits to phone numbers
2 Status at time of printing 14 Lists
14 Dialing from a list
Safety notes 14 Deleting individual entries
3 Exposure to radio frequency technology 15 Deleting the entire list
3 For your own safety 15 Touch Tone dialing
3 Settings
3 Using the mobile phone in the car Operation by voice control*
3 Using the mobile phone in the vicinity of the car 15 The concept
3 Antenna 15 Voice Commands
16 Canceling operation via voice
Overview 16 Voice commands
4 Hands-free system 16 An example: dialing phone numbers
4 Adjusting the volume 16 Volume adjustment
16 First steps
Getting started with your Bluetooth phone 16 Entering unlock code
5 The principle 16 Correcting unlock code
5 What is…? 16 Deleting unlock code
6 Inserting the Snap-in adapter 16 Canceling the operation
6 Inserting the mobile phone 17 Calling
6 Removing the mobile phone 17 Dialing phone number
7 Activating Bluetooth in your vehicle 17 Correcting phone number
7 Pairing the mobile phone to the vehicle 17 Deleting input
7 Set the car in pairing mode 17 Voice phone book
7 Set the mobile phone in pairing mode 17 Storing an entry
8 Pairing 17 Selecting an entry
9 List of paired mobile phones 17 Reading out and selecting entries
9 Deleting mobile phone in the vehicle 17 Redialing
10 De-activating Bluetooth connection 17 Deleting an entry
10 Telephoning via the hands-free unit 17 Deleting all entries
18 Notes
Getting started with your BMW CPT 9000 18 Important for voice commands
10 Switching the mobile phone on/off
10 Inserting the mobile phone Text messages/SMS*
10 Removing the mobile phone (only available for CPT 9000)
18 Displaying text messages/SMS
General phone instruction 19 Calling sender
12 Operation using the display 19 Deleting text messages/SMS
12 Receiving a call
12 Accepting a call Entering unlock code*
12 Rejecting a call (only available for CPT 9000)
12 Calling 19
12 Dialing phone numbers
13 Ending a call
1
Notes
Using this Owner's Manual Status at time of printing
This Owner's Manual instructs you how to oper- BMW pursues a policy of continuous, on-going
ate your mobile phone using the multi-function development of the equipment and accessories
steering wheel, Display and the voice input sys- that ensures the highest quality standards com-
tem*. bined with advanced, state-of-the-art technolo-
For how to operate the mobile phone itself gy for BMW products. For this reason, the fea-
please see the separate Owner's Manual. tures described in this Owner's Manual could
differ from those in your vehicle. You are there-
Should the day arrive when you wish to sell
fore asked to appreciate that no claims can be
your BMW, please remember to hand this
recognized on the basis of the data, illustrations
Owner's Manual to the next owner; it is an
or descriptions in this Owner's Manual.
important part of the vehicle.
If you have any additional questions, your BMW
Center will be glad to help you.
Symbols used
Indicates precautions that must be fol-
lowed precisely in order to avoid the pos-
sibility of personal injury and serious damage to
the vehicle or the mobile phone.
Contains information that will assist you
in gaining the optimum benefit from your
mobile phone.
! Marks the end of a specific item of informa-
tion.
* Indicates special equipment, country-specific
equipment and optional extras when available.
"..."Identifies texts in the Display for selecting
functions
Identifies inputs made via the voice input
system.
{...} Identifies voice commands.
{{...}} Identifies instructions generated by the
system.
2
Safety Notes
3
Overview
Depending on your handset, you can connect your Adjusting the volume
Bluetooth phone via the Bluetooth interface or the CPT
9000 via the cradle to your vehicle.
You can adjust the volume of the hands-free system dur-
" Getting started with your Bluetooth phone, refer to
ing a phone call:
page 5
" By using the buttons on the steering wheel
" Getting started with your
BMW CPT 9000, refer to page 11 " By using the Radio volume control
The telephone can be operated using: The volume of the hands-free system stays at the level set
here even if you lower the volume of other audio sources
" The multi-function steering wheel*
to a minimum.
" The Display*
" The voice input system*
For how to operate your mobile phone, please read the
separate Owner's Manual.
For Bluetooth phones BMW recommends that mobile
phones be operated inside the car via the optional cradle
with external antenna. Otherwise mutual interference
between the vehicle's electronics and such equipment
cannot be entirely ruled out.
While using BMW Assist, you will not be able to operate
the BMW mobile phone until after you have completed the
service call.
Only make adjustments if the traffic conditions
permit, so as not to endanger the car's occupants
and other road users by being distracted. Using a hand-
held mobile phone while driving is dangerous and is illegal
in many cities. Use the telephone in conjunction with the
hands-free unit, or pull over in a suitable place where you
will not endanger other road users.
Hands-free system
The hands-free microphone is located in the headliner.
The hands-free system is switched on automatically when
you make or receive a call using the following equipment:
" Button on the steering wheel
" Display.
As soon as you make a call with the hands-free system,
the other audio sources are automatically muted.
4
Getting started with your Bluetooth phone
5
Inserting the Snap-in adapter Inserting the mobile phone
1. Press button 1. 1. Remove the protective plug from the mobile phone's
Take out the cover antenna connector if necessary, so that the mobile
phone can be engaged in the cradle.
6
Activating Bluetooth in your vehicle 2. Call up i menu by pressing the controller
1. Press the button to call up the start menu 3. Select "Communication settings" and press the
controller
7
Pairing You cannot operate your mobile phone via the vehicle
while this list is being displayed.
In order to pair, you must enter a random passkey both via
the mobile phone and via the Display. The passkey can be
any number that you choose up to 16 digits long.
7. Depending on your mobile phone, you will be
prompted by the mobile phone or by the Display to
enter the passkey.
Via the Display:
8. Select "Add device" and press the controller
The next time you use the mobile phone inside the car,
provided the ignition key is on, the phone will be connect-
ed to the vehicle.1
As soon as a mobile phone is identified by the vehicle,
depending on your mobile phone the phone book entries
stored on the SIM card and/or in your mobile phone will be
transferred to your vehicle. Transferring this data may take
several minutes.
9. Enter passkey. Up to four mobile phones can be paired in succession. If
Depending on the mobile phone, you will have you wish to pair additional phones, first please delete
approximately 30 seconds to enter the passkey on unused phones from the list.
the mobile phone and on the Display.
Enter the same passkey in the mobile phone and in
To interrupt pairing of the mobile phone in the vehicle:
the Display.
Select "Refuse connection" and press the controller.
8
List of paired mobile phones Deleting mobile phone in the vehicle
All mobile phones that are paired are displayed in a list. If you no longer wish to operate a mobile phone via the
The mobile phone, which is at the top of the list, has the vehicle, you can delete it from the list.
highest priority and the vehicle will try to connect to this 1. Press the button to call up the start menu
device first. If the device is not available, the vehicle will
proceed with the next device at the list.
You can alter the order in which the mobile phones are dis- 2. Call up i menu by pressing the con-troller
played at the list. You cannot operate your mobile phone 3. Select "Communication settings" and press the
via the vehicle while this list is being displayed. controller
1. Press the button to call up the start menu 4. Select "Bluetooth" and press the controller
5. Select "Phone" and press the controller
2. Call up i menu by pressing the controller 6. Select the desired mobile phone and press the
controller
3. Select "Communication settings" and press the
controller
4. Select "Bluetooth" and press the controller
5. Select "Phone" and press the controller
9
De-activating Bluetooth connection Telephoning via the hands-free unit
If the Bluetooth connection is de-activated, you can no A conversation that you started outside the car can be
longer operate the mobile phone via the vehicle. continued inside the car, via the hands-free unit.
To de-activate the Bluetooth connection between your Your mobile phone may switch automatically to the hands-
vehicle and your mobile phone temporarily: free mode, depending on model and settings. To switch
1. Take the mobile phone out of the cradle and switch it manually to hands free mode, you can use the portable
off phone (Please refer to your portable phone owners manu-
2. Press the button to call up the start menu al for more information) or the cradle button (dependent
on the portable phone model).
10
Getting started with your BMW CPT 9000
To operate the BMW mobile phone using the equipment in When using the V60S move button (1) to the back
the vehicle, it must be placed in the cradle. position. This will raise the connector (2) to the
While using BMW Assist, you will not be able to operate correct position in order to insert the handset.
the BMW mobile phone until after you have completed the
service.
11
General phone instruction
You can use the following functions via the Display: Accepting a call
" Entering unlock code with portable phone inserted*
" Dialing phone number
" Phone book
" Top 8
*****
or
" Redialing Name or #
" Displaying accepted calls
" Displaying missed calls
" Emergency call, Assist
" Text messages/SMS2 Select "Accept" and press the controller.
Calling
Dialing phone numbers
1. Select "Phone" and press the controller
Receiving calls
If you have the phone number of the caller stored in the 2. Select "Dial" and press the controller
phone book and the phone number is transmitted, the 3. To enter the phone number: select digits individually
name of the entry is displayed. and press the controller. Always enter the complete
phone number consisting of international/national
dialing code, area code, and phone number.
To delete the entered digit:
Move the controller to the right to select
and press the controller
______________________________
2
SMS only for CPT 9000 available
12
4. Select "Dial number" and press the controller. Dialing from the phone book
1. Select "Phone" and press the controller.
Ending a call
1. If necessary, select the telephone number 2. Select "A-Z" and press the controller.
An alphabetical listing of all the entries in the phone
book appears on the Display.
To run a targeted search for an entry, select the first
letter of the entry and press the controller.
The first entry that starts with the letter is displayed.
3. Select the desired entry.
Phone book
The "A-Z" list is available to you for your phone book
entries. The entries in the SIM card's and/or mobile
phone's phone book appear on the Display; they are
arranged in alphabetical order.
13
Adding digits to phone numbers Dialing from a list
You can add other digits to a phone number stored in the To select an entry and establish a connection:
phone book, e.g. to call a specific extension: 1. Select "Phone" and press the controller
1. Select "Phone" and press the controller 2. Select the list:
2. Select "A-Z" and press the controller " "Top 8"
3. Select the desired entry ""Redial"
4. Press the controller. ""Received calls"
Other menu items are displayed ""Missed calls"
5. Select "Add digits" and press the con-troller
6. To supplement the phone number:
Select digits individually and press the controller
7. Select "Dial number" and press the controller.
Lists
Your phone can store phone numbers you have dialed and
calls you missed in lists. If the caller is entered in the tele-
phone book, the name of the entry is displayed instead of
the phone number. 3. Press the controller
You can select the desired subscriber from the list and 4. Select the desired entry
establish the connection.
Four lists are available to you:
" "Top 8".
The eight numbers called most frequently via the list
"A - Z" are automatically stored in the Top 8 list. The
number called most often appears at the top of the
list
" "Redial".
The last eight phone numbers you have dialed are
automatically stored. The last number dialed is at 5. Press the controller.
the top of the list
Other menu items are displayed
" "Received calls".
6. Select "Call" and press the controller.
The phone numbers of the last eight calls accepted
The system dials the number.
while the portable phone was in its cradle are stored.
Here, it must be possible for the telephone number
of the caller to be sent Deleting individual entries
" "Missed calls". 1. Select the desired entry from the list
The phone numbers of the last eight calls not 2. Press the controller.
accepted while the portable phone was in its cradle Other menu items are displayed
are stored. Here, it must be possible for the tele- 3. Select "Delete" and press the controller.
phone number of the caller to be sent.
The entry is deleted.
14
2. Press the controller.
Other menu items are displayed
3. Select "Keypad" and press the controller
4. Select the desired digits and press the controller.
Each digit is sent immediately.
Voice commands
Touch Tone dialing In ignition key position 2:
Touch tone numbers are required to access network serv- 1. Briefly press the button on steering wheel.
ices or to control devices, e.g. remote access to an
A sound signal indicates operating readiness
answering machine.
2. Speak voice commands.
This function can only be used during a call.
To have the system list the voice commands possi-
1. Establish a connection
ble in each case:
{Help}.
15
Canceling operation via voice This volume for the instructions is maintained, even if the
other audio sources are set to minimum volume.
Briefly press the button on steering wheel
Depending on which key you have used to open the vehi-
or
cle, the last adjustment is applied.
{Cancel}.
In dialogs where text of any kind can be spoken, e.g. a First steps
name, canceling is only possible using the button.
The dialog is automatically interrupted when an incoming Entering unlock code
call is received. You can protect your BMW portable phone against misuse
with a four-digit unlock code.
Voice commands 1. {Input unlock code}.
In addition to the commands described in this Owner's The dialog for entering the unlock code is
Manual, alternative commands are often possible for the started
same functions, e.g.: 2. Speak unlock code
{Dial name} or {Name}. 3. {Send unlock code}.
Digits from zero to nine are understood.
You can say each digit individually or group them into a Correcting unlock code
sequence of three to five digits to accelerate the input.
After the last spoken sequence of digits has been repeat-
You say The voice input system replies ed by the system, you can delete this sequence of digits.
{Dial number} {{Please say the number}}
e.g. {555-123-4567} e.g. {{555-123-4567. Continue?}} 1. {Correct number}.
{Dial} {{Dialing number}} The block of digits is deleted
2. Speak the new unlock code on request
An example: dialing phone number 3. {Send unlock code}.
Start the dialogue:
Briefly press the button on the steering wheel. Deleting unlock code
{Delete number<.
Volume adjustment
You can adjust the volume for the instructions from the Canceling the operation
system: {Cancel}.
16
Calling Selecting an entry
Dialing phone number The connection to the phone number of the selected entry
is established.
1. {Dial number}.
1. {Dial name}.
The dialog for establishing a telephone connec-
tion is called up The dialog for selecting an entry is called up
2. Say the phone number. 2. Speak the name on request
3. Confirm the prompt with {Yes}.
For telephone calls abroad, say {Plus} and then
the country code
3. {Dial}. Reading out and selecting entries
The connection to the desired subscriber is You can have all the entries of your voice phone book read
out in the order of input and select a certain entry to estab-
established.
lish a connection:
1. {Read phone book}.
Correcting phone number The dialog for reading the phone book is called
After the last spoken sequence of digits has been repeat- up
ed by the system, you can delete this sequence of digits. 2. {Dial number} when the desired entry is read
{Correct number}. out.
The digits are deleted.
The command {Correct number} can be repeated as often Redialing
as you like. {Redial} dials the last phone number dialed.
17
Notes Text messages/SMS*
The voice commands were available in English on going to (only available for CPT 9000)
print. Other languages are currently not available. The messages/SMS are displayed as long as the portable
phone is inserted.
Important for voice commands The symbol on the Display shows that you have
For voice commands, bear the following in mind: received a new text message. The symbol is no longer dis-
" Issue the commands fluently and at normal volume, played after there are no unread text messages.
avoiding excessive emphasis and pauses The number of text messages that can be stored depends
" Keep the doors, windows and glass roof closed to on the memory capacity of your BMW portable phone.
prevent interference from ambient noise
" Avoid other sources of noise in the vehicle while Displaying text messages/SMS
speaking, and ask other vehicle occupants to refrain
from talking while you are using the system. 1. Select "SMS" and press the controller.
18
Calling sender Entering unlock code*
1. Select the desired text message and press the con- (only available for CPT 9000)
troller. If you are asked to enter the Unlock Code by a message on
The text message is displayed the Display:
2. Select "Options" and press the controller 1. Select "Phone" and press the controller
3. Select "Call sender" and press the controller.
The selected sender is called.
19
More about BMW
The Ultimate
bmwusa.com Driving Machine