Beruflich Dokumente
Kultur Dokumente
registers. SERILIZER
2m COAX CABLE
DESERIALIZER
(USB POWERED) OUT+ IN+
19) Select any of the other tabs to evaluate other POWER OVER COAX (POC)
*Jumper selections in the Serializer/Deserializer group boxes on the Configurations Settings window are for reference only and
do not affect software operation.
**Default position.
Figure 2. MAXSerDesEV-N EV Kit Software: Configuration Settings Window (shown with MAX96705 and
MAX96706 EV Kits Connected)
Figure 4. MAXSerDesEV-N EV Kit Software: Warning! (Microcontroller Firmware is Not the Latest Version)
Evaluation Kit Window updates from a previously saved file and the Save button
The Evaluation Kit window shown in Figure 5 provides saves the existing register values into a new file.
access to all internal registers and functions of the The Deserializer group box provides pushbuttons to
DUTs by means of reading and writing registers through update the deserializer’s register map from the DUT using
different tabs, thus enabling the user to evaluate various the Read All MAX96706 button. The Load button reads
functions of the serializer and deserializer. and updates from a previously saved file and the Save
The Read All button updates the SerDes register maps button saves the existing register values into a new file.
by reading the DUT’s internal registers. The Wake Up button applies the register write sequence
The Serializer group box provides pushbuttons to update described in the IC data sheets to wake the DUTs from
the serializer’s register map from the DUT using the sleep mode.
Read All MAX96705 button. The Load button reads and The Open Configuration button returns to the
Configuration Settings window.
Figure 5. MAXSerDesEV-N EV Kit Software: Evaluation Kit Window (MAX96705 Ser Tab (Serializer))
Figure 6. MAXSerDesEV-N EV Kit Software: Evaluation Kit Window (MAX96706 Des Tab (Deserializer))
Figure 7. MAXSerDesEV-N EV Kit Software: Evaluation Kit Window (Additional Features Tab)
On the Additional Features tab, press the Serializer Crossbar Switch button to launch the Serializer Crossbar
Switch Configuration function (Figure 8). This capability allows the rerouting of data between the parallel input/output
by the serializer. Refer to the respective IC data sheet for a detailed description and operation on the embedded crossbar
switches.
Figure 8. MAXSerDesEV-N EV Kit Software: Evaluation Kit Window (Serializer Crossbar Switch Configuration Window)
On the Additional Features tab, press the Deserializer Crossbar Switch button to launch the Deserializer Crossbar
Switch Configuration function for the deserializer (Figure 9). This capability enables rerouting data between the paral-
lel input/output by the deserializer. Refer to the respective IC data sheet for a detailed description and operation on the
embedded crossbar switches.
Figure 9. MAXSerDesEV-N EV Kit Software: Evaluation Kit Window (Deserializer Crossbar Switch Configuration Window)
On the Additional Features tab, press the Timing Generator button to launch this function (Figure 10), which allows the
user to utilize the programmable video timing generator to generate/retime the input sync signals. Refer to the respective
IC data sheet for a detailed description.
Figure 10. MAXSerDesEV-N EV Kit Software: Evaluation Kit Window (Timing Generator Window)
On the Additional Features tab, press the Equalizer Visualization button to launch this function (Figure 11), which
allows compensating for higher cable attenuation and higher frequencies. Refer to the respective IC data sheet for a
detailed description.
Figure 11. MAXSerDesEV-N EV Kit Software: Evaluation Kit Window (Equalizer Visualization Window)
On the Additional Features tab, press the Show PRBS Test button to perform a PRBS test (Figure 12). Enter test
duration (maximum 32,767s = 9.1hrs) in the Duration edit box and press Start to start the test. At test completion, the
number of bit errors are read from the PRBSERR register, and displayed in the PRBS Error Counter box.
Log\Low Level Tab
The Log\Low Level tab (Figure 13) logs all activities between the GUI and DUTs.
The Register Access group box allows reads or writes of the specified slave and register addresses. Use the Send String
to EVKIT button to communicate with non-register-based devices (such as the MAX7324). The SerDes Baud Rate drop-
down list sets the communications baud rate. Note that the baud rate should be changed in small increments/decrements
(one step change is forced by the GUI).
Figure 12. MAXSerDesEV-N EV Kit Software: Evaluation Kit Window (Show PRBS Test Window, Expanded)
Figure 13. MAXSerDesEV-N EV Kit Software: Evaluation Kit Window (Log\Low Level Tab)
Oscillator (PCLK) Circuit Block Place jumper IDT_EN (J26) in the “L” position to dis-
An on-board custom oscillator (U4) to supply PCLK is able the oscillator output. To operate the the oscilla-
provided to facilitate the serializer/deserializer evalua- tor at a frequency other than the four preprogrammed
tion. This is an I2C-programmable oscillator with four frequencies, refer to the oscillator data sheet available at
custom preprogrammed and jumper-selectable www.idt.com/products/clocks-timing/quartz-crystal-
frequencies. FSEL0 and FSEL1 jumpers positions select oscillator-ics-xo-crystal-clock-oscillators-and-low-
one of the preprogrammed frequencies per list below: power-oscillator-circuits/8n0q001-quad-frequency-
programmable-xo-0, or contact the manufacturer.
FSEL1 FSEL0 PCLK (MHz)
L L 25.0
L H 37.0
H L 78.0
H H 104.0
Figure 14. MAX96705/MAX96711 Coax EV Kit Jumper Settings for Coax Link and I2C Communication
Figure 15. MAX96706/MAX96708 Coax EV Kit Jumper Settings for Coax Link and I2C Communication
Component Suppliers
SUPPLIER PHONE WEBSITE
Amphenol RF 800-627-7100 www.amphenolrf.com
Hong Kong X’tals Ltd. 852-35112388 www.hongkongcrystal.com
Integrated Device Technology (IDT) 908-766-4941 www.idt.com
Murata Americas 770-436-1300 www.murataamericas.com
ON Semiconductor 602-244-6600 www.onsemi.com
Rosenberger Hochfrequenztechnik GmbH 011-49-86 84-18-0 www.rosenberger.de
TDK Corp. 847-803-6100 www.component.tdk.com
Note: Indicate that you are using the MAX96705 or MAX96711 when contacting these component suppliers.
Revision History
REVISION REVISION PAGES
DESCRIPTION
NUMBER DATE CHANGED
0 12/15 Initial release —
Removed future product designation from MAX96711COAXEVKIT# in Ordering
1 3/16 20
Information
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses
are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. © 2016 Maxim Integrated Products, Inc. │ 21
TITLE: Bill of Materials
DATE: 12/2015
DESIGN: max96705_711_evkit_a
1
REF_DES DNI/DNP QTY VALUE DESCRIPTION MFG PART # MANUFACTURER
2
REF_DES DNI/DNP QTY VALUE DESCRIPTION MFG PART # MANUFACTURER
3
REF_DES DNI/DNP QTY VALUE DESCRIPTION MFG PART # MANUFACTURER
4
REF_DES DNI/DNP QTY VALUE DESCRIPTION MFG PART # MANUFACTURER
RESISTOR; 0402; 30K OHM; 1%; 100PPM;
R74 - 1 30K 0.063W; THICK FILM RC0402FR-0730KL YAGEO PHICOMP
RESISTOR; 0603; 0 OHM; 5%; JUMPER; RC1608J000CS; CR0603-J/- SAMSUNG
R75, R76 - 2 0 0.10W; THICK FILM 000ELF;RC0603JR-070RL ELECTRONICS/BOURNS/YAGEO PH
RESISTOR; 0603; 1K OHM; 1%; 100PPM;
R100 - 1 1K 0.10W; THICK FILM CR0603-FX-1001ELF BOURNS
MACHINE SCREW; SLOTTED; PAN; 4-40IN;
SCREW1-SCREW4 - 4 P440.375 3/8IN; NYLON P440.375 GENERIC PART
TEST POINT; JUMPER; STR; TOTAL
LENGTH=0.256IN; BLACK; INSULATION=PBT
CONTACT=PHOSPHOR BRONZE; COPPER
SU1-SU25 - 25 STC02SYAN PLATED TIN OVERALL STC02SYAN SULLINS ELECTRONICS CORP.
IC; HS81 PRELIMINARY; PACKAGE OUTLINE
32 TQFN; 0.50MM PITCH; 21-0140/T3255-8;
U1 - 1 MAX96705GTJ MAX96705 MAX96705GTJ MAXIM
IC; VREG; LOW-DROPOUT LINEAR
U2,U3,U12 - 3 MAX1792EUA33 REGULATOR; UMAX8 MAX1792EUA33 MAXIM
EVKIT PART; IC; IDT8N0Q001; CD10
PACKAGE OUTLINE 7X5 BODY; 2.54MM
U4 - 1 IDT8N0Q001 PITCH; CUSTOM PART ONLY IDT8N0Q001 IDT
IC; TRANS; +/-15KV ESD-PROTECTED, 1UA,
16MBPS, QUAD LOW-VOLTAGE LEVEL
U15 - 1 MAX3378EEUD+ TRANSLATOR; TSSOP14 MAX3378EEUD+ MAXIM
IC; CTRL; STEP-DOWN CONTROLLER WITH
U23 - 1 MAX16952AUE/V+ LOW OPERATING CURRENT; TSSOP16-EP MAX16952AUE/V+ MAXIM
CONNECTOR; MALE; USB; USB2.0 MICRO
CONNECTION CABLE; USB B MICRO MALE
MISC1 DNI 1 AK67421-1-R TO USB A MALE; STRAIGHT; 5PINS-4PINS AK67421-1-R ASSMANN
PACKAGE OUTLINE 0603 NON-POLAR
C37, C59, C128 DNP 3 OPEN CAPACITOR N/A N/A
EVKIT PART; MODULE; CTRL; TEENSY USB
DEVELOPMENT BOARD; TH-37; CUSTOM
DB1 DNP 1 TEENSY 3.1 PART ONLY TEENSY 3.1 PJRC
TOTAL 234
5
8 7 6 5 4 3 2 1
J1 TP_12V
+12V
PJ-202BH D5
B360B-13-F
1
A C
+
3 C118 C116 C115
2 100UF 0.1UF 10UF
+12V
D C130
D
10UF
5
6
7
8
1
C127 SUP D N1
10UF FDS8449
13 BIAS EN 2 DH IN
4 G S
12 DL FB 7 +5V0
DL IN POC5V
1
2
3
FSYNC 4
R76 0
15 DH
DH IN R2 14.3K
10 PGOOD FOSC 3
5
R74 C117 0.1UF 1
6 COMP BST 16
L25 R1
REG+5V 2 4 +5VIN
9 OUT LX 14 J2
30K 1.5UH +5VIN
CS 8 0.015 JU1
U23 C A
C129 C128 C2 C114 USB+5V C3 C4 C5 C6
MAX16952AUE/V+
3
5
6
7
8
2200PF OPEN D4 10UF 100UF USB+5V 10UF 0.1UF 100UF 0.1UF
EP PGND SGND B360B-13-F
17
D J3
11
5
GND
4 G S R75
DL IN
0
N2
C C
1
2
3
FDS8449 C1
1500PF
U12
+5V0 +5V0 +1V8IO
FB14 MAX1792EUA33
120
1 IN OUT 7
5 GND
4
+1V8IO IOVDD
9 EP
FB5
A
D8 R58
EXT 120
SML-210VTT86 1 3 J20
LED_PWR EXT-IOVDD
K 11K JU2
C20 C19
R38
IOVDD 3.3V
2
B 4.7UF 4.7UF B
24.9K
J34
GND
U2
+5V0 +3V3
FB1 MAX1792EUA33
120
1 IN OUT 7
GND1 GND2 GND3 GND4
C7 C8 C9 2 IN OUT 8
DVDD
0.1UF 10UF 0.1UF
4 SHDN C10 C11
10UF 4.7UF
6 SET RST 3
2
FB8
5 GND
+3V3
9 EP
120
R4 1 3 J19
EXT-DVDD
41.2K JU3 C58 C57
4.7UF 4.7UF
R3 DVDD
24.9K AVDD
X1 X2 X3 X4
U3
+5V0 +1V8VDD
MAX1792EUA33
2
FB3 FB6
A 120 120 A
1 IN OUT 7 1 3 J18
EXT-AVDD
C16 C18 C17 2 IN OUT 8
JU4 C54 C53
0.1UF 10UF 0.1UF
4 SHDN C13 C14
AVDD 4.7UF 4.7UF
10UF 4.7UF
6 SET RST 3
5 GND
+1V8VDD
9 EP
PROJECT TITLE:
R6 MAX96705_711_EVKIT_A
DRAWING TITLE:
11K
R5 SIZE HARDWARE NUMBER: DATE:
24.9K B <HARDWARE_NUMBER> <DATE>
ENGINEER: DRAWN BY: REV:
<ENGINEER> <DRAWN_BY> A
TEMPLATE REV:
SHEET 2 OF 5
1.5
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
+3V3 +5V0
J53
VDD_REF
D
IOVDD 1 3 D
3.3V 5V
2
VDD_REF
R7 R9
2.2K 2.2K
AVDD
2
IOVDD
2
2
2
J21 J22
J60
SCLPU SDAPU J54 J55 LFAVDD
C99 C100
0.1UF 0.1UF
EXSDAPU EXSCLPU
1
1
1
U15
MAX3378EEUD+
14
R11 R13
1
VL VCC 2.2K 2.2K R16 R19
C J6 45.3K 45.3K C
8 3-STATE
LSH_SDA
1 VDD_REF
2 LMN0 IN LMN1 IN
RX/SDA OUT
1 2 2 I/O VL1 I/O VCC1 13 3 EXT_RX/SDA
1 2 3 I/O VL2 I/O VCC2 12 4 GND
2
IOVDD LSH_SCL 4 I/O VL3 I/O VCC3 11 EXT_TX/SCL
J50 5 I/O VL4 J58 J59
I/O VCC4 10
1
LFL+ LFL-
1
TX/SCL/DBL
2
DBL-H VHC3
VLC3
1
7 GND
1 U15_TX/SCL J13
6 NC
9 NC
UC_RX/SDA
TX/SCL/DBL I69 J11 IN
3 VHC4
DBL-L VLC4 IN UC_TX/SCL
4
2
R17 R20
2
4.99K 4.99K
LF+ IN LF- IN
+5V0
POC5VOUT
POC5V R18 R21
B IN LF+ B
49.9K 49.9K
2
2
OPEN
+12V
POC12V C62 C64 C61 C60 R30 R31 R32 R12
4
1 J56 J57
0.22UF 100UF 0.1UF 1000PF J4
LFR+ LFR-
2K 2K 2K 0
2
4
3
5
1
L3 L2 L1
POC5V POC5VOUT
IN LF-
2
2
4
3
5
L6 L7 L8
PROJECT TITLE:
MAX96705_711_EVKIT_A
DRAWING TITLE:
DVDD
1
MS/HVEN PWDN 0.1UF 1000PF
IN DIN0 H H
2 2 U1
22
29
12
5
MAX96705GTJ
IN DIN1 L L
AVDD
AVDD
DVDD
IOVDD
3
3
IN DIN2
PCLKIN I102
25 PCLKIN
IOVDD IN DIN3
H1-3 H1-1 H1-2 16 PWDN
IN DIN4
1 1 1 15 MS/HVEN
C C
2 2 2
IN DIN5
3 3 3 26 DIN0
4 4 4
IN DIN6 27 DIN1
5 5 5 28 DIN2
6 6 6
IN DIN7 30 DIN3
7 7 7 31 DIN4
8 8 8
IN DIN8 32 DIN5
9 9 9 1 DIN6
10 10 10
IN DIN9 2 DIN7
11 11 11 3 DIN8 21 C63 0.22UF
12 12 12 4
OUT+ I109 OUT+
IN DIN10/GPIO2 DIN9
13 13 13 6 DIN10/GPIO2
14 14 14 7 20 C12 0.22UF
IN DIN11/GPIO3 DIN11/GPIO3 OUT- I110 OUT-
15 15 15 8 DIN12/GPIO4
16 16 16
IN DIN12/GPIO4/LMN0 9 DIN13/GPIO5/DE
B B
10 DIN14/HS
IN DIN13/GPIO5/LMN1 11 DIN15/VS
IN DIN14/HS 13 GPO/HIM
IOVDD 14 GPIO1/BWS
IN DIN15/VS
17 LCCEN
IOVDD 18 CONF0
R34 19 CONF1
2.2K
IOVDD J30
1
GPIO2 H 24
1
R14
H TX/SCL/DBL TX/SCL/DBL
2 1 J40 RX/SDA 23 RX/SDA
I158 DIN10/GPIO2 BWS 2 2
2.2K J41
J32
LCCN
EP
GPIO3 L L
3
IOVDD IOVDD
3
A R15 A
33
2 1 I159 DIN11/GPIO3
2.2K
1
H H
2
3
GPIO4/LMNO IOVDD DRAWING TITLE:
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
1
H H H
D
1
C30
2 C32 D
2 2 2 C29
+
C28 10UF C31 10UF
0.1UF
0.1UF 470UF
L L L
3
2
USB+5V
37
36
35
34
8
L4
VDD
2 C96 C97
OE 120
1 33 0.1UF 1000PF
GND VIN
DNU 1
DNU 7 C85
R36 1K
TNZ_RX1 I22
2 0-RX1 AGND 32 0.1UF
4 FSEL0
U4
R22 1K 5 IDT8N0Q001 3 31
FSEL1
6 TNZ_TX1 I23 1-TX1 3.3V
Q I52 PCLK_IDT
C J35 C
U4_SDA 4 2 23-A9 30
TNZ_SDA0 I10
2 1 9 SDATA
5 3 22-A8 29
10 SCLK
GND
TNZ_SCL0 I11
2 1
6 4 21-A7 28
3
J25
U4_SCL
7 5-TX1 20-A6 27
PCLK_SMA DB1
I45 PCLK_SMA TEENSY 3.1 I92 TNZ_SCL0
1 1 8 6 DNI 19-A5 26
J38
5 4 3 2 SMA I93 TNZ_SDA0
PCLK_IN 2 9 25
5
4
3
2
7-RX3 18-A4
B 3 1 J7 B
I15 PCLKIN
GND 10 8-TX3 17-A3 24 14
4 13 VIN
IDT 12 GND
PCLK_IDT I42 11 +3.3V
11 9-RX2 16-A2 23 10 TNZ_A9
9 TNZ_A8
8 TNZ_A7
7 TNZ_A6
12 10-TX2 15-A1 22 6 TNZ_SCL0
5 TNZ_SDA0
4 TNZ_A3
TNZ_SCL0 I24
3 TNZ_A2
13 21 2 TNZ_A1
1
J39 11 14-A0
1 TNZ_A0
SCL UC_TX/SCL 13
2 I29 UC_TX/SCL
TP1 14 12 13 20
PROGRAM
TX
A14/DAC
VBAT
GND
3.3V
3
TNZ_RX1 I25
A A
15
16
17
18
19
TNZ_SDA0 I26
1
J29
SDA UC_RX/SDA
PROJECT TITLE:
2 I28 UC_RX/SDA MAX96705_711_EVKIT_A
RX DRAWING TITLE:
3
HARDWARE NAME:MAX96705_711_EVKIT_A
HARDWARE NUMBER:
ENGINEER: DESIGNER:
17-A3
16-A2
15-A1
14-A0
VDD_REF J2 J3
U15
AGND
3.3V
J6 EXSDAPU -
VIN
13
VLC3 VHC3
EXT_TX/SCL
EXT_RX_SDA
GND
VDD_REF
+3.3V J1 -
VLC4 VHC4
C4
+
C5
H2 A14-DAC +5V
R7
CT_SCL
CT_SDA
PROGRAM J55 C3
C6 D5
USB
EXSCLPU
GND
TEENSY 3.1 R9 C118
3.3V L5 R23 +5VIN C129
JU1
SCLPU
SDAPU
J21
DB1
J22
R74
POWER
USB+5V
H3 VBAT R2
R76
H4
GND3 POC5V C128
C32 C115
C31
C116
11
5-TX1
10-TX2
12
0-RX1
1-TX1
8-TX3
9-RX2
7-RX3
2
3
4
REG+5V U23
TP1 TP_12V
GND
GPIO3 R15
TX RX GND4
R29 GPI05/LMN1
GPIO4/LMN0
GPIO1/BWS
UC_RX/SDA
HIM_HI
L L L L L L L
MS/HVEN
PWDN
L
CONF1
CONF0
LCCN
D4
H H H H H H H H J30 J32 J44
SCL SDA R34 R28 R33 L25
R19
R16
C1 R75
IOVDD_DUT
L H
U4_SCL
U4_SDA
GPO_LOW
LFR-
LFR+
DIN15/VS,DIN13/VS
DIN14/HS,DIN/HS C114 R1
LFL-
LFL+
LFAVDD
J60
J58
+3.3V
J20
C20
C19
+1.8V
5VOUT DIN11/GPIO3
R100 D8
POC- 5VIN DIN10/GPIO2
R38 JU2
CONF1/0
DIN9 FB5 EXT-IOVDD
12V PCLK_SMA R58 IOVDD
LL C F I DIN8
J5 J52 LM C F U
C104
C103
JU3
LH C R I DIN7 C30 DVDD J19
C58
C57
C12 U12
ML C R U
C107
C108
C106
DIN6 C29
C63 MM T F I DIN5 C28
5VOUT MH T F U INT EXT EXT-DVDD
J4 U1 FB14 FB8
DIN4 R3
HL T R I
OUT+
C9
C8
C7
POC+ 5VIN U4 R4
HM T R U DIN3
12V PCLK_IDT
DIN2
C11
C10
J51 JU4
H1-3
H1-2
H1-1
R36
R22
C53
DBL-H H L
J38 R6
J28 GND1
J34
MAX96711 PCLK_IN
IDT
SMA
FSEL1
C14
C13
H L
GND
U3 GND
J26 FB3
MAX96705_711 COAX EVKIT BOARD H L IDT_OE
REV-A
1-888-629-4642 www.maximintegrated.com 7/15 JG
1/6
This document contains information considered proprietary,
HARDWARE NAME:MAX96705_711_EVKIT_A
HARDWARE NUMBER:
ENGINEER: DESIGNER:
2/6
This document contains information considered proprietary,
HARDWARE NAME:MAX96705_711_EVKIT_A
HARDWARE NUMBER:
ENGINEER: DESIGNER:
3/6
This document contains information considered proprietary,
HARDWARE NAME:MAX96705_711_EVKIT_A
HARDWARE NUMBER:
ENGINEER: DESIGNER:
4/6
This document contains information considered proprietary,
HARDWARE NAME:MAX96705_711_EVKIT_A
HARDWARE NUMBER:
ENGINEER: DESIGNER:
5/6
This document contains information considered proprietary,
HARDWARE NAME:MAX96705_711_EVKIT_A
HARDWARE NUMBER:
ENGINEER: DESIGNER:
C100
J11
J13
C85
J3
J2
C97
C99
C96
J6
L4 J54
R11
R13
LSH_SCL
LSH_SDA
DB1 J53
J55
J1
GND3
J22
J21
JU1
TP1
TP_12V
GND4
J44
J30
J33
J32
J23
J39
J29
J47
J43
J42
J48
J41
J40
J46
J45
J25
J60
J35
J59
J57
J56
J58
C37
R24
R26
R25 C34
L8
J20
JU2
R27
L7 C33 C27 PCLK_SMA
R39
C24
R18 C60
R31 C62 C15
R12
J50
J51
L1 DBL-L
R32 J27 JU4 J18
R30 U15_TX/SCL
C64
C59 GND1
DBL-H
J28
J34
J26
J38
6/6