Beruflich Dokumente
Kultur Dokumente
COM
加拿大温特岩土工程公司 VANCOUVER, CANADA
________________________________________________________________________
Notes for MSE Walls: (geo-computing)
2005.09; 2011.08; 2012.08.18
1. Factor of safety against sliding: 3. Maximum base pressure
N N
FS sliding Pmax using the Meyerhof equation, and
Pa Pq L 2e
Lateral force from soil mass & surcharge: Mom( D)
eccentricity: e (Note: e ≤ L/6)
Pa 0.5Ka ( H L tan i)2 N
Pq K a q H
4. Internal stability
Reaction at base and weight of the wall: (a). over-stressing of reinforcement (rupture):
N W q L Ta
FS rupture , and
W H L 0.5 L tan i
2
Tmax
H = height of the wall at the wall face; γ = soil
unit weight; L = length of wall/reinforcement ;
Tmax h SV , and the lateral stress
η =base friction coefficient. z L tan i
h [(1 a) (2a 1)(1 )] K a H ' K a q
H'
2. Factor of safety against over-
turning H′ = H + L tan(i); and
Mom( R) z = depth to this layer of reinforcement at wall face.
FS over turning , and
Mom( D) (b). pullout of reinforcement:
Mom(R) (W q L) 0.5L B _ strength Le
Mom(D) Pa Y p Pq 0.5H FS pullout , and
Tmax
Acting point of Pa: B _ strength 2 V , and overburden stress, σV, is:
1 a
Yp ( H L tan i) V [( z 0.5L tan i) ( L 0.5Le ) tan i] q
3
Note: Weight of wall is assumed to be at 0.5L, Le L Lb ( H z ) tan [Note: Le = R_length]
even for walls with a back slope angle (i). The active stress wedge is defined by:
Lb = length at base of wall, β=angle to vertical