Beruflich Dokumente
Kultur Dokumente
HEAD
• 100% 316 stainless steel head and two-piece manifold resists
washout and corrosion
• Stainless steel fasteners provide additional
• protection against environmental elements
• Heavy-duty, high pressure seals and back-up washers are
included to guard against corrosion and continuous duty
fatigue
• Precision-machined, stainless steel valve and seats provide
higher resistance to chemical attack
• Self-adjusting, spring-loaded, double V-packings maintain
constant high pressure seal compression and extend seal and
plunger life
:OV^U^P[OVW[PVUHSTV\U[PUNRP[RP[75 • High density ceramic plungers increase the high pressure
seal life
• Lifetime warranty on the stainless steel head
Order Information BODY
Model Max. • Oversized crankshaft, bearings and bronze
Max. GPM Max. PSI Inlet Port Outlet Port
Number RPM
• connecting rod can handle the abuse of cold start-ups and
2535S 38 1200 800 1-1/2” NPT 1” NPT intermittent operation
2545S 47 1200 800 1-1/2” NPT 1” NPT • Forged stainless steel plunger rod stepped between plunger
3430-0645 Base Rail Kit guide and oil seal eliminates seal failure due to plunger rod
3430-0699 2535S Mobile Repair Kit (See below for details)
wear
• Heavy-duty oil seals for longer life
• 5-year warranty on material & workmanship
2545S 2545S
PSI 800 1000 1200 BAR 55 69 83
RPM GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw
400 24.4 13.2 24.2 16.0 24.1 18.9 400 92.4 9.8 91.6 11.9 91.2 14.1
500 30.4 16.1 30.3 19.6 30.2 23.1 500 115.1 12.0 114.7 14.6 114.3 17.2
600 36.5 19.2 36.5 23.2 36.4 27.5 600 138.2 14.3 138.2 17.3 137.8 20.5
700 42.1 22.1 42.1 27.1 42.0 32.3 700 159.4 16.5 159.4 20.2 159.0 24.1
800 46.8 25.1 46.8 30.4 46.7 36.1 800 177.2 18.7 177.2 22.7 176.8 26.9
105
Forged Brass Head, Triplex Plunger Pumps
Series 2400B-P
HEAD
• Single-piece forged brass heads
• Quick and easy pump packing replacement
• Precision-machined stainless steel valve and seats provide
higher resistance to chemical attack
• 100% ceramic plungers
• Dual low pressure packing design for improved priming
capabilities
• Lifetime warranty on single-piece forged brass heads
BODY
• Hypro’s state-of-the-art, patented cartridge technology
allows the crankcase oil seals and all wet-end seals to be
easily serviced by removing only the pump head
• Hardened stainless steel lower plungers offer superior
corrosion and wear resistance
• Longer lasting drive system with heavy-duty ball bearings
• Bronze piston guides give you larger bearing surface for
extended life on oil seals and plungers
• 1” OD Solid Shaft
• Heavy-duty oil seals
• O-ring sealed dipstick
• Includes rail mounting kit
• 5-year warranty on material & workmanship
2411B-P 2411B-P
PSI 1000 1500 2000 2500 BAR 69 103 138 172
RPM GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw
1000 3.2 2.4 3.2 3.3 3.1 4.2 3.1 5.1 1000 12.1 1.8 11.9 2.5 11.7 3.1 11.7 3.8
1150 3.7 2.5 3.7 3.6 3.6 4.6 3.6 5.6 1150 14.0 1.9 13.8 2.6 13.6 3.4 13.4 4.2
1450 4.6 3.1 4.6 4.4 4.5 5.7 4.5 7.0 1450 17.4 2.3 17.2 3.3 17.0 4.3 16.8 5.2
1725 5.3 3.7 5.3 5.2 5.2 6.7 5.1 8.1 1725 20.1 2.8 19.9 3.9 19.7 5.0 19.3 6.0
2412B-P 2412B-P
PSI 1000 1500 2000 2500 BAR 69 103 138 172
RPM GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw
1000 3.6 2.7 3.5 3.6 3.5 4.6 3.5 5.6 1000 13.6 2.0 13.2 2.7 13.2 3.4 13.2 4.2
1150 4.1 2.9 4.1 4.1 4.0 5.2 4.0 6.4 1150 15.5 2.2 15.5 3.1 15.1 3.9 15.1 4.8
1450 5.1 3.7 5.1 5.1 5.0 6.6 5.0 8.0 1450 19.3 2.8 19.3 3.8 18.9 4.9 18.9 6.0
1725 5.9 4.2 5.9 5.9 5.8 7.7 5.7 9.4 1725 22.3 3.1 22.3 4.4 22.0 5.7 21.6 7.0
106
PISTON AND PLUNGER PUMPS
2413B-P U.S. Units 2413B-P Metric Units
PSI 500 1000 1500 1800 BAR 34 69 103 124
RPM GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw
1000 4.4 1.8 4.4 3.0 4.3 4.2 4.3 5.0 1000 16.7 1.3 16.7 2.2 16.3 3.1 16.4 3.7
1150 5.1 1.9 5.0 3.3 5.0 4.8 4.9 5.7 1150 19.1 1.4 18.9 2.5 18.9 3.6 18.7 4.2
1450 6.3 2.5 6.2 4.2 6.1 5.9 6.1 7.0 1450 23.7 1.8 23.5 3.1 23.1 4.4 23.2 5.2
1725 7.2 2.9 7.1 4.9 7.0 6.8 7.0 8.1 1725 27.1 2.2 26.9 3.7 26.5 5.1 26.6 6.1
2414B-P 2414B-P
PSI 500 1000 1500 1800 BAR 34 69 103 124
RPM GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw
1000 5.0 1.9 4.9 3.3 4.9 4.7 4.9 5.5 1000 18.9 1.4 18.5 2.5 18.5 3.5 18.5 4.1
1150 5.7 2.0 5.6 3.7 5.6 5.3 5.6 6.3 1150 21.6 1.5 21.2 2.8 21.2 4.0 21.2 4.7
1450 7.0 2.5 6.9 4.6 6.9 6.6 6.8 7.8 1450 26.5 1.9 26.1 3.4 26.1 4.9 25.7 5.8
1725 7.9 3.0 7.8 5.3 7.7 7.6 7.7 8.8 1725 29.9 2.2 29.5 4.0 29.1 5.7 29.1 6.6
2430B-P 2430B-P
PSI 1000 2000 3000 3600 BAR 69 138 207 248
RPM GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw
1000 2.7 1.9 2.6 3.4 2.5 4.8 2.5 5.6 1000 10.2 1.4 9.8 2.5 9.5 3.6 9.5 4.2
1150 3.1 2.1 3.0 3.8 2.9 5.4 2.8 6.4 1150 11.7 1.6 11.4 2.8 11.0 4.0 10.6 4.8
1450 3.9 2.6 3.8 4.8 3.6 6.8 3.6 8.0 1450 14.8 1.9 14.4 3.6 13.6 5.1 13.6 6.0
1725 4.6 3.1 4.4 5.7 4.3 8.1 4.2 9.5 1725 17.4 2.3 16.7 4.3 16.3 6.0 15.9 7.1
2431B-P 2431B-P
PSI 1000 2000 3000 3600 BAR 69 138 207 248
RPM GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw
1000 3.2 2.4 3.1 4.2 3.1 5.9 3.0 6.8 1000 12.1 1.8 11.7 3.1 11.7 4.4 11.4 5.1
1150 3.7 2.5 3.6 4.6 3.5 6.6 3.5 7.7 1150 14.0 1.9 13.6 3.4 13.2 4.9 13.2 5.7
1450 4.6 3.1 4.5 5.7 4.4 8.2 4.3 9.8 1450 17.4 2.3 17.0 4.3 16.7 6.1 16.3 7.3
1725 5.3 3.7 5.2 6.7 5.0 9.5 5.0 11.2 1725 20.1 2.8 19.7 5.0 18.9 7.1 18.9 8.4
2432B-P 2432B-P
PSI 1000 1500 3000 3600 BAR 69 138 207 248
RPM GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw
1000 3.6 2.6 3.5 4.7 3.4 6.9 3.4 7.8 1000 13.6 1.9 13.2 3.5 12.9 5.1 12.9 5.8
1150 4.1 2.9 4.0 5.3 4.0 7.5 3.9 8.8 1150 15.5 2.2 15.1 4.0 15.1 5.6 14.8 6.6
1450 5.2 3.6 5.0 6.6 4.9 9.4 4.8 11.0 1450 19.7 2.7 18.9 4.9 18.5 7.0 18.2 8.2
1725 6.0 4.2 5.8 7.6 5.7 10.9 5.6 12.8 1725 22.7 3.1 22.0 5.7 21.6 8.1 21.2 9.5
2433B-P 2433B-P
PSI 1000 1500 2000 2500 BAR 69 103 138 172
RPM GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw
1000 4.4 3.0 4.3 4.2 4.3 5.5 4.3 6.7 1000 16.7 2.2 16.3 3.1 16.3 4.1 16.3 5.0
1150 5.0 3.3 5.0 4.8 4.9 6.2 4.9 7.6 1150 18.9 2.5 18.9 3.6 18.5 4.6 18.5 5.7
1450 6.2 4.2 6.1 5.9 6.1 7.7 6.0 9.4 1450 23.5 3.1 23.1 4.4 23.1 5.7 22.7 7.0
1725 7.1 4.9 7.0 6.8 7.0 8.9 6.9 10.8 1725 26.9 3.7 26.5 5.1 26.5 6.6 26.1 8.1
2434B-P 2434B-P
PSI 1000 1500 2000 2500 BAR 69 103 138 172
RPM GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw
1000 4.9 3.4 4.9 4.8 4.8 6.2 4.8 7.6 1000 18.5 2.5 18.5 3.6 18.2 4.6 18.2 5.7
1150 5.6 3.8 5.6 5.4 5.5 7.1 5.5 8.5 1150 21.2 2.8 21.2 4.0 20.8 5.3 20.8 6.3
1450 7.0 4.5 6.9 6.5 6.8 8.6 6.8 10.5 1450 26.5 3.4 26.1 4.8 25.7 6.4 25.7 7.8
1725 7.9 5.3 7.8 7.7 7.8 10.0 7.7 12.1 1725 29.9 4.0 29.5 5.7 29.5 7.5 29.1 9.0
107
Forged Brass Head, Triplex Plunger Pumps
Series 2300B-P
HEAD
• Single-piece forged brass heads
• Quick and easy pump packing replacement
• Precision-machined stainless steel valve and seats provide
higher resistance to chemical attack
• 100% ceramic plungers
• Dual low pressure packing design for improved priming
capabilities
• Lifetime warranty on single-piece forged brass heads
BODY
• Hypro’s state-of-the-art, patented cartridge technology allows the crankcase oil seals and all wet-end seals to be easily
serviced by removing only the pump head
• Hardened stainless steel lower plungers offer superior corrosion and wear resistance
• Shafts Output:
• ¾” OD Solid Shaft – 2303B-P, 2304B-P, 2314B-P, 2330B-P, 2351B-P & 2345B-P
• ¾” OD Solid Shaft with M6 x 1” Tapped Thread for clutch installation – 2359B-P & 2340B-P
• ¾” OD Solid Shaft with 6” electric clutch assembly – 2359B-PY
• ¾” ID Hollow Shaft Flanged for direct couple to gasoline engines – 2354B-CP & 2331B-CP
• Heavy-duty oil seals
• O-ring sealed dipstick
• Includes rail mounting kit
• 5-year warranty on material & workmanship
2303B-P 3.1 1200 1725 1/2” 3/8” 2330B-P 3.1 2500 1725 1/2” 3/8”
2304B-P 4.2 1200 1725 1/2” 3/8” 2359B-P* 3.5 3000 1725 1/2” 3/8”
2314B-P 4.0/3.0 1200 1450/1100 1/2” 3/8” 2351B-P 4.0 3000 1725 1/2” 3/8”
Left-hand shaft extension - add suffix “L” - (i.e. 2303B-LP) 2340B-P* 4.2 2500 1725 1/2” 3/8”
2345B-P 4.8 2500 1725 1/2” 3/8”
2303B-P, 2304B-P, 2314B-P U.S. Units 2303B-P, 2304B-P, 2314B-P Metric Units
PSI 500 700 1000 1200 BAR 34 48 69 83
RPM GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw
1100 3.1 1.3 3.1 1.6 3.1 2.1 3.1 2.4 1100 11.7 1.0 11.7 1.2 11.7 1.6 11.7 1.8
1450* 4.1 1.5 4.0 2.0 4.0 2.7 4.0 3.2 1450* 15.5 1.1 15.1 1.5 15.1 2.0 15.1 2.4
1725** 3.1 1.2 3.1 1.7 3.1 2.2 3.1 2.6 1725** 11.7 0.9 11.7 1.3 11.7 1.6 11.7 1.9
1725*** 4.3 1.6 4.3 2.0 4.2 2.9 4.2 3.4 1725*** 16.3 1.2 16.3 1.5 15.9 2.2 15.9 2.5
* 2314 only, ** 2303 only, *** 2304 only * 2314 only, ** 2303 only, *** 2304 only
108
PISTON AND PLUNGER PUMPS
2330B-P U.S. Units 2330B-P Metric Units
PSI 500 700 1000 1300 1500 2000 BAR 34 48 69 90 103 172
RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw
1000 1.8 0.7 1.8 1.0 1.8 1.3 1.8 1.6 1.8 1.9 1.8 2.9 1000 6.8 0.5 6.8 0.7 6.8 1.0 6.8 1.2 6.8 1.4 6.8 2.2
1450 2.7 1.0 2.7 1.4 2.6 1.9 2.6 2.3 2.6 2.7 2.5 4.2 1450 10.2 0.7 10.2 1.0 9.8 1.4 9.8 1.7 9.8 2.0 9.5 3.1
1600 2.9 1.1 2.9 1.5 2.9 2.0 2.9 2.5 2.8 2.8 2.8 4.6 1600 11.0 0.8 11.0 1.1 11.0 1.5 11.0 1.9 10.6 2.1 10.6 3.4
1725 3.1 1.2 3.1 1.7 3.1 2.2 3.1 2.8 3.1 3.2 3.0 5.0 1725 11.7 0.9 11.7 1.3 11.7 1.6 11.7 2.1 11.7 2.4 11.4 3.7
2340B-P 2340B-P
PSI 500 700 1000 1300 1500 2000 BAR 34 48 69 90 103 172
RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw
1000 2.5 1.0 2.5 1.3 2.5 1.8 2.5 2.2 2.5 2.5 2.4 4.0 1000 9.5 0.7 9.5 1.0 9.5 1.3 9.5 1.6 9.5 1.9 9.1 3.0
1450 3.6 1.3 3.6 1.8 3.6 2.4 3.6 3.1 3.5 3.6 3.5 5.6 1450 13.6 1.0 13.6 1.3 13.6 1.8 13.6 2.3 13.2 2.7 13.2 4.2
1600 4.0 1.5 4.0 1.9 3.9 2.7 3.9 3.3 3.9 3.8 3.8 6.2 1600 15.1 1.1 15.1 1.4 14.8 2.0 14.8 2.5 14.8 2.8 14.4 4.6
1725 4.3 1.6 4.3 2.0 4.2 2.9 4.2 3.6 4.2 4.1 4.1 6.6 1725 16.3 1.2 16.3 1.5 15.9 2.2 15.9 2.7 15.9 3.1 15.5 4.9
2345B-P 2345B-P
PSI 500 700 1000 1300 1500 2000 BAR 34 48 69 90 103 172
RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw
1000 2.8 1.2 2.8 1.5 2.8 2.0 2.8 2.5 2.8 2.8 2.7 4.5 1000 10.6 0.9 10.6 1.1 10.6 1.5 10.6 1.9 10.6 2.1 10.2 3.4
1450 4.1 1.7 4.1 2.2 4.0 2.9 4.0 3.7 4.0 4.1 4.0 6.5 1450 15.5 1.3 15.5 1.6 15.1 2.2 15.1 2.8 15.1 3.1 15.1 4.8
1600 4.5 1.8 4.4 2.4 4.4 3.2 4.4 4.1 4.4 4.6 4.3 7.2 1600 17.0 1.3 16.7 1.8 16.7 2.4 16.7 3.1 16.7 3.4 16.3 5.4
1725 4.8 2.0 4.7 2.6 4.7 3.4 4.7 4.4 4.7 4.9 4.6 7.6 1725 18.2 1.5 17.8 1.9 17.8 2.5 17.8 3.3 17.8 3.7 17.4 5.7
2351B-P 2351B-P
PSI 500 700 1000 1300 2000 3000 BAR 34 48 69 90 138 207
RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw
1000 2.4 0.9 2.3 1.7 2.3 2.1 2.3 2.4 2.3 3.1 2.3 4.3 1000 9.1 0.7 8.7 1.3 8.7 1.6 8.7 1.8 8.7 2.3 8.7 3.2
1450 3.4 1.4 3.4 2.4 3.4 3.0 3.3 3.4 3.3 4.4 3.2 6.3 1450 12.9 1.0 12.9 1.8 12.9 2.2 12.5 2.5 12.5 3.3 12.1 4.7
1600 3.8 1.6 3.7 2.7 3.7 3.3 3.7 3.7 3.6 4.8 3.6 7.0 1600 14.4 1.2 14.0 2.0 14.0 2.5 14.0 2.8 13.6 3.6 13.6 5.2
1725 4.0 1.7 4.0 2.9 4.0 3.5 4.0 4.0 3.9 5.1 3.8 7.4 1725 15.1 1.3 15.1 2.2 15.1 2.6 15.1 3.0 14.8 3.8 14.4 5.5
2331B-CP 2331B-CP
PSI 500 700 1000 1300 1500 BAR 34 48 69 90 103
RPM GPM HP GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw
1800 1.9 1.0 1.9 1.2 1.8 1.5 1.8 1.8 1.8 2.1 1800 7.2 0.7 7.2 0.9 6.8 1.1 6.8 1.3 6.8 1.6
2600 2.7 1.4 2.6 1.7 2.6 2.2 2.6 2.7 2.5 3.0 2600 10.2 1.0 9.8 1.3 9.8 1.6 9.8 2.0 9.5 2.2
2875 2.9 1.5 2.9 1.9 2.8 2.4 2.8 2.8 2.8 3.2 2875 11.0 1.1 11.0 1.4 10.6 1.8 10.6 2.1 10.6 2.4
3450 3.4 1.9 3.4 2.2 3.3 2.8 3.3 3.4 3.3 3.8 3450 12.9 1.4 12.9 1.6 12.5 2.1 12.5 2.5 12.5 2.8
2354B-CP 2354B-CP
PSI 500 1000 1500 2000 BAR 34 69 90 103
RPM GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw
2800 2.4 1.3 2.3 2.0 2.3 2.7 2.2 3.4 2800 9.1 1.0 8.7 1.5 8.7 2.0 8.3 2.5
3000 2.6 1.4 2.5 2.2 2.4 2.9 2.3 3.7 3000 9.8 1.0 9.5 1.6 9.1 2.2 8.7 2.8
3200 2.7 1.6 2.6 2.4 2.6 3.2 2.5 3.9 3200 10.2 1.2 9.8 1.8 9.8 2.4 9.5 2.9
3400 2.9 1.6 2.8 2.4 2.7 3.3 2.6 4.0 3400 11.0 1.2 10.6 1.8 10.2 2.5 9.8 3.0
109
Forged Brass Head, Duplex Plunger Pumps
Series 2200B-P
HEAD
• Single-piece forged brass heads
• Quick and easy pump packing replacement
• Precision-machined stainless steel valve and seats provide
higher resistance to chemical attack
• 100% ceramic plungers
• Dual low pressure packing design for improved priming
capabilities
• Lifetime warranty on single-piece forged brass heads
BODY
• Hypro’s state-of-the-art, patented cartridge technology allows the crankcase oil seals and all wet-end seals to be easily
serviced by removing only the pump head
• Hardened stainless steel lower plungers offer superior corrosion and wear resistance
• Shafts Output:
• ¾” OD Solid Shaft – 2220B-P, 2221B-P, 2230B-P, 2231B-P
• 5⁄8” ID Hollow Shaft with Torque Arm – 2220B-HP, 2221B-HP, 2230B-HP, 2231B-HP
• 5⁄8” ID Hollow Shaft for direct couple to electric motors (NEMA 56C) – 2220B-AP, 2221B-AP, 2230B-AP, 2231B-AP
• ¾” ID Hollow Shaft Flanged for direct couple to gasoline engines – 2231B-CP
• Heavy-duty oil seals
• O-ring sealed dipstick
• Includes rail mounting kit
• 5-year warranty on material & workmanship
Order Information
2220B-AP, 2221B-AP, 2230B-AP,2231B-AP Order Information 2231B-CP
Model Model
Max. GPM Max. PSI Max. RPM Inlet Port Outlet Port Max. GPM Max. PSI Max. RPM Inlet Port Outlet Port
Number Number
2220B-AP 2.1 2000 1725 1/2” 3/8” 2231B-CP 3.0 1500 3450 1/2” 3/8”
2221B-AP 2.1 1500 3450 1/2” 3/8” Left-hand shaft extension - add suffix “L” - (i.e. 2231-CLP)
110
PISTON AND PLUNGER PUMPS
2220B-P, 2220B-AP, 2220B-HP U.S. Units 2220B-P, 2220B-AP, 2220B-HP Metric Units
PSI 500 700 1000 1300 1500 2000 BAR 34 48 69 90 103 138
RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw
1000 1.2 0.5 1.2 0.7 1.2 0.9 1.2 1.1 1.2 1.2 1.2 1.6 1000 4.5 0.4 4.5 0.5 4.5 0.7 4.5 0.8 4.5 0.9 4.5 1.2
1450 1.7 0.8 1.7 1.0 1.7 1.4 1.7 1.6 1.7 1.8 1.7 2.3 1450 6.4 0.6 6.4 0.7 6.4 1.0 6.4 1.2 6.4 1.3 6.4 1.7
1600 1.9 0.9 1.9 1.1 1.9 1.5 1.9 1.8 1.9 2.1 1.9 2.7 1600 7.2 0.7 7.2 0.8 7.2 1.1 7.2 1.3 7.2 1.6 7.2 2.0
1725 2.1 0.8 2.1 1.1 2.1 1.5 2.0 1.9 2.0 2.1 2.0 2.9 1725 7.9 0.6 7.9 0.8 7.9 1.1 7.6 1.4 7.6 1.6 7.6 2.2
111
Big Twin
Models 5206C and 5206C-H
Order Information
Max Max Max Max Max Pressure GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP
Model Number Shaft Output in PSI LPM HP LPM HP LPM HP LPM HP LPM HP LPM HP
GPM LPM PSI BAR RPM
5206C 8 30.3 400 27.6 800 1" solid shaft w/base and BAR @400 RPM @500 RPM @540 RPM @600 RPM @700 RPM @800 RPM
5206C-H 8 30.3 400 27.6 800 1-3⁄8" hollow shaft w/base 25 PSI 3.9 .26 4.9 .29 5.4 .31 6.0 .34 7.0 .40 8.0 .46
3430-0037 Leather cup kit 1.7 BAR 14.8 .26 18.5 .29 20.4 .31 22.7 .34 26.5 .40 30.3 .46
Fabric Cups - Add Suffix “F” - (ie.: 5206C-F). 100 PSI 3.9 .40 5.0 .46 5.4 .50 6.0 .56 7.0 .65 7.9 .74
Buna-N Cups - Add Suffix “R” - (ie.: 5206C-R). 6.9 BAR 14.8 .40 189 .46 20.4 .50 22.7 .56 26.5 .65 29.9 .74
200 PSI 4.0 .66 5.0 .75 5.4 .81 6.0 .90 6.9 1.1 7.8 1.2
13.8 BAR 15.1 .66 18.9 .75 20.4 .81 22.7 .90 26.1 1.1 29.5 1.2
300 PSI 3.9 .89 5.0 1.1 5.3 1.2 5.9 1.3 6.9 1.5 7.7 1.7
20.9 BAR 14.8 .89 18.9 1.1 20.1 1.2 22.3 1.3 26.1 1.5 29.1 1.7
400 PSI 3.9 1.1 4.9 1.4 5.3 1.5 5.9 1.6 6.9 1.9 7.7 2.2
27.6 BAR 14.8 1.1 18.5 1.4 20.1 1.5 22.3 1.6 26.1 1.9 29.1 2.2
Big Twin
Models 5210C and 5210C-H
• Port sizes: 3⁄4" inlet, 3⁄4" outlet
• Max. fluid temperature: 140°F/60°C
• Pump shaft rotation: bi-rotational
• Cups: Leather standard [fabric-reinforced (F) and Buna-N (R) available]
• Recommended to be used with Pulsation Dampener 3375-0015-2
• Weight: 18 lbs./8.2 kg
112
Small Twin
PISTON AND
Series 5315, 5320, 5325 and 5330
PUMPS
PLUNGER PUMPS
• Port sizes: 1⁄2" inlet, 1⁄2" outlet
• Max. fluid temperature: 140°F/60°C
• Pump shaft rotation: bi-rotational
• Cups: Leather (-X) standard for 5300 Series [Buna-N (-RX),
Teflon (-CX) available]
• Models require a pulsation dampener (such as a 3375-0012 pulse hose) on the
discharge side
• Injector head available (sold separately part number 3396-0014)
• Weight: 10 lbs./4.5 kg
Order Information
Max Max Max Max Max Model 5315 5320 5325 5330
Model Number Shaft Output
GPM LPM PSI BAR RPM Pressure GPM HP GPM HP GPM HP GPM HP
5315C-X 1.5 5.7 500 34.5 1800 5⁄8" OD solid shaft in PSI LPM HP LPM HP LPM HP LPM HP
5320C-X 2.2 8.3 500 34.5 1800 5⁄8" OD solid shaft and BAR @1725 RPM @1725 RPM @1725 RPM @1725 RPM
5325C-X 2.5 9.5 500 34.5 1800 5⁄8" OD solid shaft 50 PSI 1.56 .12 2.22 .21 2.56 .25 3.02 .37
5330C-X 3 11.4 500 34.5 1800 5⁄8" OD solid shaft 3.4 BAR 5.9 .12 8.4 .21 9.7 .25 11.4 .37
5315C-HX 1.5 5.7 500 34.5 1800 5⁄8" ID hollow shaft 100 PSI 1.52 .15 2.18 .28 2.54 .37 3.01 .49
5320C-HX 2.2 8.3 500 34.5 1800 5⁄8" ID hollow shaft 6.9 BAR 5.8 .15 8.3 .28 9.6 .37 11.4 .49
5325C-HX 2.5 9.5 500 34.5 1800 5⁄8" ID hollow shaft 200 PSI 1.50 .28 2.16 .43 2.52 .52 3.00 .74
5330C-HX 3 11.4 500 34.5 1800 5⁄8" ID hollow shaft 13.8 BAR 5.7 .28 8.2 .43 9.3 .52 11.4 .74
Buna-N - add suffix "R" - ( i.e :5320C-RX) 300 PSI 1.47 .35 2.12 .57 2.50 .68 2.98 .92
Teflon - add suffix "C" - ( i.e :5320C-CX) 20.7 BAR 5.6 .35 8.0 .57 9.5 .68 11.3 .92
400 PSI 1.45 .43 2.11 .71 2.10 .82 2.96 1.11
27.6 BAR 5.5 .43 8.0 .71 7.9 .82 11.2 1.11
500 PSI 1.44 .56 2.10 .83 2.44 .96 2.94 1.23
34.5 BAR 5.5 .56 7.9 .83 9.9 .96 11.1 1.23
Small Twin
Models 5324C and 5324C-H • Port sizes: 1⁄2" inlet, 1⁄2" outlet
• Max. fluid temperature: 140°F/60°C
• Pump shaft rotation: bi-rotational
• Cups: Buna-N standard
• Model 5324 requires a pulsation dampener (such as a 3375-0012 pulse hose) on the
discharge side
• Injector head available 3396-0006
• Weight: 11 lbs./5 kg
113
Small Twin
Models 5321C, 5322C, 5321C-H and 5322C-H
Order Information
Max Max Max Max Max Shaft Plunger Pressure GPM HP GPM HP GPM HP GPM HP
Model Number
GPM LPM PSI BAR RPM Output Material in PSI LPM HP LPM HP LPM HP LPM HP
5321C 2.2 8.3 1000 68.9 1800 5⁄8" OD solid shaft Stainless Steel and BAR @900 RPM @1200 RPM @1450 RPM @1725 RPM
5322C 2.2 8.3 1000 68.9 1800 5⁄8" OD solid shaft Ceramic
100 PSI 1.1 0.2 1.5 .3 1.8 .4 2.2 .4
5321C-H 2.2 8.3 1000 68.9 1800 5⁄8" ID hollow shaft Stainless Steel
5322C-H 2.2 8.3 1000 68.9 1800 5⁄8" ID hollow shaft Ceramic 6.9 BAR 4.2 0.2 5.7 .3 6.8 .4 8.3 .4
300 PSI 1.1 .4 1.5 .5 1.8 .6 2.1 .7
20.7 BAR 4.2 .4 5.7 .5 6.8 .6 7.9 .7
500 PSI 1.1 .5 1.5 .6 1.8 .7 2.1 .8
34.5 BAR 4.2 .5 5.7 .6 6.8 .7 7.9 .8
700 PSI 1.1 .6 1.5 .8 1.8 .9 2.1 1.1
48.3 BAR 4.2 .6 5.7 .8 6.8 .9 7.9 1.1
1000 PSI 1.1 .8 1.4 1.0 1.8 1.2 2.1 1.4
69.0 BAR 4.2 .8 5.3 1.0 6.8 1.2 7.9 1.4
Small Twin
Model 53702
• Port sizes: 1⁄2" inlet, 1⁄2" outlet
• Max. fluid temperature: 180°F/82°C
• Pump shaft rotation: bi-rotational
• Plungers: polished ceramic
• Model 53702 requires a pulsation dampener
(such as a 3375-0012 pulse hose) on the discharge side
• Inlet requirements: pressure feed 20-100 psi (1.4-6.9 bar)
• Weight: 11 lbs./5 kg
GPM HP
Pressure in PSI and BAR LPM HP
@3450 RPM
100 PSI 2.3 .4
6.9 BAR 8.7 .4
300 PSI 2.2 .7
20.7 BAR 8.3 .7
Order Information 500 PSI 2.1 .9
Max Max Max Max Max 34.5 BAR 8.0 .9
Model Number Shaft Output 700 PSI 2.1 1.2
GPM LPM PSI BAR RPM
53702 2.2 8.3 1000 68.9 3450 5⁄8" ID hollow shaft 48.3 BAR 8.0 1.2
1000 PSI 2.0 1.5
69 BAR 7.6 1.5
114
Small Twin
PISTON AND
Model 53703
PUMPS
PLUNGER PUMPS
• Max. fluid temperature: 180°F/82°C
• Port sizes: 1⁄2" inlet, 1⁄2" outlet
• Pump shaft rotation: bi-rotational
• Plungers: polished ceramic
• Model 53703 requires a pulsation dampener (such as a 3375-0012 pulse hose) on
the discharge side
• Inlet requirements: pressure feed 20-100 psi (1.3 - 6.9 bar)
• Weight: 11 lbs./5 kg
Order Information
Max Max Max Max Max Pressure GPM HP
Model Number Shaft Output
GPM LPM PSI BAR RPM in PSI LPM HP
53703 2.3 8.7 1000 68.9 3100 5⁄8" ID hollow shaft and BAR @3100 RPM
Requires a Special Order Gas Engine With 5⁄8” Shaft 100 PSI 2.3 0.4
6.9 BAR 8.7 0.4
300 PSI 2.2 .7
20.7 BAR 8.3 .7
500 PSI 2.1 .9
34.5 BAR 7.9 .9
700 PSI 2.1 1.2
48.3 BAR 7.9 1.2
1000 PSI 2.0 1.5
69.0 BAR 7.6 1.5
Closed-Coupled Unloaders
Injector Orifice
Model Max Max Max Max Range Max Max
Inlet/Outlet Description
Number PSI Bar GPM LPM Temp Temp
GPM LPM
116
Piston/Plunger Accessories
Brass Body;
3300-0084 3/8” (F)NPT 2000 138 200-2000 14-138 7 26 160° F 71° C Stainless Steel
plunger & seat
High Flow Pressure Regulator/Relief Valve for 2535S & 2545S Pumps
Max Max Balanced Pressure Max Max
Model Number Inlet/Outlet
PSI Bar GPM LPM
PSI Bar
3300-0102 3/4” x 1/2” 53 200
2000 138 260-2000 18-138
1 3300-0103 1” x 1” 55 208
2
117
Piston/Plunger Accessories
C-Flange Kits
Model Number Fits Motor For Models
Pulsation Dampeners
These quality-built pulsation dampeners protect your system from damage due to pulsation and vibration. Choose the
size and capacity that meets your system’s needs. In most applications, the recommended dampener charge is 1/2 of
the operating pressure with a 2-piston pump and 2/3 of the operating pressure with a 3-piston pump.
Model Number Inlet Charge Charge Max Max For Models Ref #
PSI Bar GPM LPM
1
2 3375-0015-x 1” (F)NPT 35 132 2500 Series 1
200-1000 14-69
3375-0017-x 1/2” (F)NPT 6 23 2000 Series 2
Note: Replace 'x' with maximum charge designation; Example: 3375-0015-8 = 800 psi, 3375-0017-7 = 700 psi
Available in 100 psi increments from 200 psi to 1000 psi.
Pulse Hoses
Quality pulsation dampener hoses constructed of special Hi-Flex horizontally-braided hose.
3375-0012 24” (61 cm) 1500 103 3/8” (F)NPT x plugged end
Gear Boxes
Model Number Inlet/Outlet Max Max Max Max Description Materials
PSI Bar Temp Temp
1.8:1 gearbox kit for mounting
8000-0015 10 hp-18 hp gas engines with
1-1/8” solid shaft (Kohler
engines) Forged brass
3/8” (F)NPT x 3200 220 200° F 93° C body; Stainless
3/8” (M)NPT 1.8:1 gearbox kit for mounting steel ball and
spring
8000-0021 8 hp-18 hp gas engines with
1” solid shaft (B&S and Honda
engines)
118
Piston/Plunger Accessories
Vacuum Switches
Max Max
Features
Model Number Performance Temp Temp • Switches can be used with either AC or DC motors in
the ratings shown
2510-0001 VAC-ON: 1.5 Hg vac. • DC (32-115-230V): up to 1/2 hp
2510-0007 VAC-ON: 2.5 Hg vac. 140° F 60° C • Single or 3 Phase at 110V: up to 2 hp
220V: up to 2 hp
2510-0017 VAC-ON: 4.5 Hg vac.
• VAC-ON switch automatically shuts off motor when
liquid is depleted or vacuum drops to a specific level
Pump Oil
Features
Model Number Size Decriptions
• Reduces scuff and wear in piston and plunger pumps
2160-0038 1 qt. (12 per carton)
Specially- • Inhibits moisture that causes damage
2160-0047 1 gallon (bulk) formulated • Prevents oxidation that could lead to sludge formation
pump oil
2160-0048 2-1/2 gallon (bulk) • Resists foaming and aeration that can cause
v equipment to operate erratically and oil to oxidize
• Provides smooth pump operation in a variety of
temperatures
Pressure Switch
Model Number Inlet Max Max Max Max Voltage Max Amp Vertical and
PSI Bar Temp Temp Horizontal Mount
119
Piston/Plunger Accessories
Float Switch
Model Number Inlet/Outlet Max Max Max Max Max Max Voltage Mount
PSI Bar GPM LPM Temp Temp
Suction Strainer
Model Number Size Opening Overall Screen Material
Size (ID) Diameter Mesh
3350-0021 1.25”
1/4” (ID) plastic tubing .330”
3350-0022 1” Stainless
50 Steel
3350-0033 5/8” (ID) x 61/64” (OD) garden hose .940” 2.187” Screen
3800-0035 (F) garden hose end .57” 1.016”
120
Piston/Plunger Accessories
Ordering Instructions:
To order one 1⁄2” x 3⁄4” Series 2738 coupling, Quantity Part Number Description
specify the following: 1 2738-1001 1⁄2” coupling end
Note: It is not necessary to order in complete
1 2738-1003 3⁄4” coupling end
sets, parts can be ordered individually.
1 2728-1001 Center disc
121