Beruflich Dokumente
Kultur Dokumente
First Floor, Eureka Court, Beside Bata, Near Chermas, Ameerpet, Hyderabad,
V.IMP NOTE: Practice the Options that are dealt in the theory class for
MODELLING
the first 20-30 minutes and then practice the figures given here.. WORKBOOK
SYLLABUS PRO/E-CORE
Day Module Pages/ Task
1 Sketcher 2,3
2 Sketcher 4,5,6, 7
13 Part Modeling 28
14 EXAM 3 SOLIDS
16 Part Modeling Parts in bearing eccentric Assembly (Save them for later use to assemble)
17 Part Modeling Parts in bearing eccentric Assembly (Save them for later use to assemble)
18 Part Modeling Parts in Shaft Support Assembly (Save them for later use to assemble)
19 Part Modeling Parts in Knuckle Joint Assembly (Save them for later use to assemble)
20 Spiritual Reality Video Parts in Universal coupling Assembly (Save them for later use to assemble)
21 Assembly Assemble Bearing Eccentric (Save them for later use to get drawings)
22 Assembly Assemble Shaft Support (Save them for later use to get drawings)
23 Assembly Assemble Knuckle Joint (Save them for later use to get drawings)
24 Group Discussions Assemble Universal coupling (Save them for later use to get drawings)
25 Drawing Get part and assembly drawings for Shaft Support (Save them for detailing later)
26 Drawing & Detailing Get part and assembly drawings for Knuckle Joint (Save them for detailing later)
27 Drawing & Detailing Get part and assembly drawings for universal coupling (Save them for detailing later)
29 Seminars- 9 people. Pro/E FAQ’s – Study PDF File and work on software/ clarify doubts with staff
30 Public Speaking Pro/E FAQ’s – Study PDF File and work on software/ clarify doubts with staff
Sketcher
Save all these part files in “D:\student files\course\month\student name” folder
And show it to your staff at the end.
Folder Example: D:\Student Files\ProE\May07\Suresh\sketch1.sec
Files saved in any other location will be deleted.
Do not try to copy this file or carry this file out of this machine
Any misuse of this file, will lead to cancellation of admission.
ECC’s Intellectual Property.
END OF SKETCHER
Assume the hole diameter as 1 unit and relatively assume dimensions for the entire component,
draw Standard views of the above figure, show it to your staff and then model them using any
software.
Relatively assume dimensions for the entire component, draw required Sectional views of the
above figure, show it to your staff and then model them using any software.
Assume the bolt diameter as ½ inch and relatively assume dimensions for the entire
component, draw Standard views of the above figure, show it to your staff and then model them
using any software.
Relatively assume dimensions for the entire component, draw Standard views of the above
figure, show it to your staff and then model them using any software.
(The students are required to complete these assemblies, while advanced part modeling is
going on and save carefully in respective folders. You are required to retrieve them and
assemble them when assembly modeling is taught in the theory classes. The drawings are to
be generated later on for the same assemblies/ parts. The Detailing also has to be done for
the same models. So keep track of these assemblies carefully.)
Do not try to copy this file or carry this file out of this machine
Any misuse of this file, will lead to cancellation of admission.
ECC’s Intellectual Property.
BEARING ECCENTRIC
Assembly Practice – 2
(The students are required to complete these assemblies, while advanced part modeling is
going on and save carefully in respective folders. You are required to retrieve them and
assemble them when assembly modeling is taught in the theory classes. The drawings are to be
generated later on for the same assemblies/ parts. The Detailing also has to be done for the
same models. So keep track of these assemblies carefully.)
Do not try to copy this file or carry this file out of this machine
Any misuse of this file, will lead to cancellation of admission.
ECC’s Intellectual Property.
Assembly practice – 3
(The students are required to complete these assemblies, while advanced part modeling is
going on and save carefully in respective folders. You are required to retrieve them and
assemble them when assembly modeling is taught in the theory classes. The drawings are to be
generated later on for the same assemblies/ parts. The Detailing also has to be done for the
same models. So keep track of these assemblies carefully.)
Do not try to copy this file or carry this file out of this machine
Any misuse of this file, will lead to cancellation of admission.
ECC’s Intellectual Property.
here. Whatever you took, you took from God. Whatever you gave, you gave to him. You came
empty handed, you will leave empty handed. What is yours today, belonged to someone else
yesterday, and will belong to someone else the day after tomorrow. You are mistakenly
enjoying the thought that this is yours. It is this false happiness that is the cause of your sorrows.
"Whatever you took, you took from God. Whatever you gave, you gave
ECC’s Intellectual Property.
to him. You came empty handed, you will leave empty handed."
• Change is the law of the universe. What you think of as death, is indeed life. In one instance you
can be a millionaire, and in the other instance you can be steeped in poverty. Yours and mine,
big and small - erase these ideas from your mind. Then everything is yours and you belong to
everyone.
• This body is not yours, neither are you of the body. The body is made of fire, water, air, earth
and ether, and will disappear into these elements. But the soul is permanent - so who are you?
• Dedicate your being to God. He is the one to be ultimately relied upon. Those who know of his
support are forever free from fear, worry and sorrow.
• Whatever you do, do it as a dedication to God. This will bring you the tremendous experience of
joy and life-freedom forever.
The Bhagavad Gita is the essence of the Vedas and Upanishads. It is a universal scripture
applicable to people of all temperaments, for all times. It is a book with sublime thoughts and
practical instructions on Yoga, Devotion, Vedanta and Action. The Bhagavad Gita has influenced
many great thinkers over the years.
1. “Thousands of candles can be lit from a single candle, and the life of the candle will not be
shortened. Happiness never decreases by being shared.”
2. “All that we are is the result of what we have thought. The mind is everything. What we think
Do not try to copy this file or carry this file out of this machine
we become.”
Any misuse of this file, will lead to cancellation of admission.
3. “We are shaped by our thoughts; we become what we think. When the mind is pure, joy
follows like a shadow that never leaves.”
4. “To conquer oneself is a greater task than conquering others”
5. “An idea that is developed and put into action is more important than an idea that exists only
as an idea.”
ECC’s Intellectual Property.
6. “Hatred does not cease through hatred at any time. Hatred ceases through love. This is an
unalterable law.”
7. “However many holy words you read, however many you speak, what good will they do you
if you do not act on upon them?”
8. “A dog is not considered a good dog because it is a good barker. A man is not considered a
good man because he is a good talker.”
9. “Teach this triple truth to all: A generous heart, kind speech, and a life of service and
compassion are the things which renew humanity.”
10. “No one saves us but ourselves. No one can and no one may. We ourselves must walk the
path.”
Service to others is the rent you pay for your room here on earth.
-Muhammad Ali
You feel to do something for the society all through your life?
You feel that you can perform better given a chance in politics?
You feel that you can enroot corruption given a chance?
You feel to make sense of your life?
You feel to make reason for being on this earth plane?
1. Subject brush-up.
You can revise your subject @ 3 to 4 ½ hours a day till you get a job at no cost and at
the same time you are required to work as Lab staff for the same time.
Example: If you prefer working on projects or practicing on proe from 7am – 11.30am,
ECC’s Intellectual Property.
you are required to work for another 4 ½ hours…i.e. From 11.30am – 4.30pm, ofcourse
with a lunch break from 1.00-1.30pm. You may opt for a different slot for teaching or
practicing and need not be continues. It all depends on “how you are occupied during
the rest of the day”.
Q) If I practice and work for 2 months, will I be given any experience letter?
A) Yes! Basing on your skills and attitude, you will be given an opportunity to get an
experience letter upto 6 months. If your performance is impressive, additionally, we
shall give you “Spoken English” Free of cost during the second month.
Q) I don’t want to work as Lab staff and just want to practice or do some projects? Is it
possible?
A) It is possible. You are required to pay Rs.1000/- for 4 weeks @ 4 ½ hours a day.
2. Placements:
We offer placement services for which you have to consult the training director or the
placement officer with a soft copy and hard copy of your resume after 2 months of
additional practice. The placement charges would be Rs.250/- for a minimum of 5
interviews.
* Rs.250/- further discount upon taking 2 courses at ECC. If students prefer to work as Lab Staff
for 2 months @ 4 ½ hours a day, this would be offered free!