Beruflich Dokumente
Kultur Dokumente
A20426508
1
Sidharth Kundathil Prasannakumar
A20426508
The United operates 744 mainline planes of different models, carrying about 50 to 366
passengers each. For a normal 737 plane carrying 180 passengers, the reduction will lead to
about 11 pounds per flight.
The airline said that this method of weight reduction is saving 170,000 gallons of fuel a year, or
$290,000 in annual fuel costs.
United has also stopped on board sales of duty-free items like perfumes, chocolates and liquor
cutting 1.4 million gallons of fuel a year at a cost savings of $2.3 million.
Virgin Atlantic recently announced a modified tray design that can accommodate more tray when
stacked. Almost 33% more trays per cart can be accomodated which lead to Virgin Atlantic getting
rid of one tray cart each flight, saving them around 53 lbs each flight. They have announced that
that losing a pound in weight from every plane in its fleet will save 53,000 litres of fuel a year,
adding up to thousands of dollars.
Lufthansa also made news with their move to reduce the weight by replacing their existing
containers with a light Weight one that weighs 31 lbs less.That’s 15.4 million pounds in weight
considering the size of their fleet, which is expected to save the airline 2,000 tons of fuel every
year.
In 2011, United Airlines purchased 11,000 iPads to replace pilots’ bulky paper manuals and
replaced it with them saving a 326,000 gallons of fuel annually. Recently, the U.S. Air Force joined
the trend and replaced their onboard flight bags with 18,000 Tablets, saving about $50 million
USD a year. Now,
American Airlines
has replaced their
Kitbags with iPads,
which will save
thousands of gallons
of fuel considering
they have over
14,000 daily flights.
OPERATIONAL PRACTICES:
Single Engine Taxiing
The taxi-out time is defined as the time that the aircraft spends on the airport before it takes off.
The aircraft here is waiting on the surface with its engines running, and this also includes the time
spent on the taxiway system and in the runway queues.
Aircraft taxiing contribute a great extent to the fuel burn and emissions at airports. With giant
engines chugging out gallons of fuel every second. The amount of fuel consumed depends on
the taxi times of each aircraft, other factors such as the throttle settings of the engines, number
of engines that are powered, and the control room decisions regarding engine shutdowns during
delays.
Fuel burn and emissions can be reduced to almost half if all aircraft were to taxi out using only a
minimum number of their engines whenever possible. This means using one engine for twin-
engine aircraft, This method is called as single-engine taxiing.
2
Sidharth Kundathil Prasannakumar
A20426508
Every engines must be warmed up before taking off, for a period that ranges from 5-10 min
depending on the type of engine. Therefore, even though an engine’s power is not necessary for
taxiing, it is necessary that all engines must be running for a minimum of 5-10 min before takeoff.
Thus, if the taxi time of an aircraft is less than five minutes, a single-engine taxi-out scenario would
not change either the activities of the pilot or the surface emissions of that flight. Alternatively, if
an aircraft taxies for longer than five minutes, the emissions are reduced by the amount of
pollutants that one of its engines would produce for the duration of the taxi time in excess of five
minutes.
This method is not done on uphill slopes or slippery surfaces, or when deicing operations are
required as the assymetric forces could push the aircraft off of its course and can even result in
fatatlities. Aircraft manufacturers like airbus and Boeing recommend that airlines adopt single-
engine taxiing whenever conditions are favourable for it, and yet only a few airlines follow it. There
is a potential for significant savings from single-engine taxiing; for example, American Airlines
and Emirates airlines is estimated to save $10-$12 million a year by following this
procedure
On a recent survey conducted on single engine Taxiing at two fifferent regions, 52% of pilots
reported following the method more than 75% of the time, while they were infrequently used on
departures and another 54% of pilots reported using them less than 10% of the time. The common
Reasons are:
• Excessive thrust and related issues.
• Maneuverability difficulties, mostly related to tight taxiway turns and weather conditions
• Problems involved in starting the second engine
• Distractions and workload issues.
Towed Taxiing
Another approach that have been proposed to reduce fuel consumption and emissions is by
shutting down all of the engines and running only the auxillary power unit and towing aircraft to
the runway, rather than using the engines to taxii. This procedure is also known as dispatch
towing. During departure tow-outs, the engines are not turned on until five minutes before takeoff
for warming up.These aircrafts are then towed to the runways with the help of towing vehicles in
the ground. As result, aircraft emissions are decreased.
Although it was tried out in the past by Virgin Atlantic for their 747 fleet, the method had to be
abandoned after Boeing adviced that the nose landing gear on the 747s are not designed to
withstand such loads on a regular basis. This concept is currently in developmennt by Airbus,
which is considering other means of dispatch towing in a way that will not involve imposing higher
loads on the nose gear. Approximate yearly fuel cost reduction if every every American
Airlline fleet were able to adopt this method: $1.3 billion USD
Shutting Down APU as much as posible at airports:
Commercial aircrafts are equipped with a small jet engine mounted in the tail end that acts as a
generator. When the main engines are shut down, pilots turn on this smaller engine, called the
Auxiliary Power Unit (APU) to provide electrical power while the aircraft is at the gate.to operate
things like the cabin lights and air conditioning. The APU also powers the systems that are used,
to start the main engine.
3
Sidharth Kundathil Prasannakumar
A20426508
Continuous Descent Arrival (CDA) or also known as Descent profile optimisation (DPO) is an
aircraft landing technique in which an arriving aircraft descends from an optimal position with
minimum thrust and avoids levelling
up or step wise landing to the extent
permitted by the safe operation of the
aircraft.
In a conventional, non-CDA,
approach the aircraft descends
stepwise, with levelled flight in-
between. But in CDA method, the
aircraft remains higher for longer and
with a reduced engine thrust. Both of
these elements induce a reduction in
fuel use, emissions and noise along
the descent profile tll it reaches the
point at which the aircraft is
established on the final approach
path. 1Image source: All Nippon Airways
The ideal CDA starts at the start of the descent and ends when the aircraft starts the final
approach and follows the glide slope to the runway. Usually, CDAs are not possible all the time,
not for all arriving flights and not always for the whole descent profile. But mesures are taken at
the airports to facilitate a higher percentage CDA to the extent possible.
Descending from a height of 6000ft can save upto quarter of a tonne of fuel for a four
engine aircraft if CDO method is used. Which will estimate to roughly 225USD per flight.
4
Sidharth Kundathil Prasannakumar
A20426508
5
Sidharth Kundathil Prasannakumar
A20426508
than necessary fuel consumption. If every flight is operated at optimal altitudes when on air,the
aircrafts could achieve a significant reduction in fuel consumption.
Average fuel reduction per flight: 23 gallons, $70 US Dollars.Total yearly fuel cost
reduction if every fleet of American Airlines adopted to this change: $330 million
The same goes for cruise speed. The “cruise phase” of an aircraft is the segment of every flight
after climb and before descent. Airline flights spend significant amounts of time in the cruise
phase, almost 56% of total flight time is spent in cruise on domestic US Domestic flight operations.
However, commercial aircrafts rarely operate at a speed that maximizes fuel efficiency. For an
aircraft carrying a particular amount of weight, there is a speed range that minimises fuel
consumption and give best fuel economy.The newest strategy is to encourage pilots to maintain
that cruise speed.
Average fuel reduction per flight: 20 gallons estimating $61 US Dollars
THE FUTURE
Blended Wing Body
Another method of reducing the fuel consumption is reducing the fleet age, that is phasing out old
aircrafts and bringing in newer aircrafts.Obviously newer aircrafts are cost effective and are much
more fuel efficient. So purchasing of newer aircrafts will reduce the fuel consumption. It is known
that the modern aircrafts are fuel efficient by almost 20 percent than the aircrafts in the 1980s.
NASA and Boeing have developed a blended wing aircraft concept with a potential of being used
for both commercial and military applications in the future. The design is called the Blended Wing
Body (BWB). The BWB has a hybrid shape that resembles the shape of a flying wing, resembling
a Stealth bomber aircraft but also incorporates features from an ordinary commercial aircraft. This
combination offers several advantages over the conventional aircraft structure. The BWB airframe
combines an efficient high-lift wings with a wide air foil-shaped body, allowing the entire aircraft
to reduce the drag and generate lift. This shape also improves fuel economy and provide larger
payload areas in the middle body portion of the aircraft.
The basic concept for a BWB was first introduced decades ago and variations of it have been
used in the aircrafts like B-2 bomber (a blended wing) and YB-49. Like the B-2, the BWB design
6
Sidharth Kundathil Prasannakumar
A20426508
makes use of composite materials that are stronger and lighter than conventional metal parts.
The BWB also has several control systems on the trailing edge for manoeuvrability, like the B-2,
instead of the conventional tail assembly.
Because of its efficient design and construction, the BWB can save 20 percent more fuel than a
conventional aircraft of similar configuration that is flying at cruise speeds of 7,000 nautical-mile
range. A BWB aircraft would have a wingspan slightly greater than a Boeing 747 and can be
operated from most of the existing airport terminals. The BWB would also weigh less, will generate
less noise and less emissions, and will have lower operational costs than an equally advanced
conventional transport aircraft.
In just fifteen years, a plane that flies with a hybrid wing shaped body will become a reality. A
scale version of the ‘Blended Wing Body’ (BWB) aircraft is being tested at a NASA facility now.
NASA announced that commercial designs will be available by 2035.
REFERENCES:
http://fivethirtyeight.com/features/if-everyone-went-to-the-bathroom-before-boarding-the-plane-
ticket-prices-might-be-lower/
Fuel Burn Reduction: How Airlines Can Shave Costs, Luke Jensen, Bryan Yutko
National Geographic Article: Green-aviation (2017)
Three Great Fuel-Saving Hacks for Airlines, March 27, 2018 | Author: Iliya Maksimov
The Top 6 Technologies for Improving Aircraft Fuel Efficiency By Rajasimha Koppula (Jan 2018)
Sustainability in operations Article By Emirates Airlines.
Article published on traveller.com, Airline weight reduction to save fuel: The crazy ways airlines
save weight on planes,By Hugh Morris
“Airbus signs MoU with Honeywell and Safran to develop electric taxiing solution for the A320
Family”: (18 December 2013) Article from www.Airbus.com
Nasa Technical Memorandum: Blended Wing Body