Beruflich Dokumente
Kultur Dokumente
Features Sensors
Specifications
(L)
Model AT8PSN- AT8PMN- Panel
Meters
Function Power OFF Delay
※1
Control time setting range 0.05 to 10 sec 0.05 to 10 min (M)
Tacho /
• 100-120VACᜠ 50/60Hz • 200-240VACᜠ 50/60Hz Speed / Pulse
Power supply Meters
• 100/110VDCᜡ • 24VACᜠ 50/60Hz, 24VDCᜡ universal
Allowable voltage range 90 to 110% of rated voltage (N)
Display
• Max. 1.5VA (100-120VACᜠ) • Max. 1.5VA (200-240VACᜠ) Units
Power consumption
• Max. 0.8W (100/110VDCᜡ) • Max. 2VA (24VACᜠ), Max. 2W (24VDCᜡ)
Timing operation Power OFF start (O)
Sensor
Control Contact type Time limit DPDT (2c) Controllers
K-71
AT8PSN/AT8PMN Series
Connections 4 5
3 6
CONTACT OUT: CONTACT OUT:
250VAC 3A, a b 250VAC 3A,
a b
30VDC 3A 2 7 30VDC 3A
RESISTIVE LOAD RESISTIVE LOAD
1 8
(Time limit 1c) (Time limit 1c)
- + SOURCE:
• 100-120VAC 50/60Hz • 200-240VAC 50/60Hz
• 24VAC 50/60Hz, 24VDC • 100/110VDC
45 +0.6
0
Min. 65
44.8
56
45 +0.6
0
72
41
※
8-pin socket
Panel
※8-pin socket (PG-08, PS-08(N)) is sold separately.
Refer to the '(G)Connectors/Connector Cables/Sensor Distribution Boxes/Sockets'.
Power ②-⑦
⑧-⑥
Time limit a contact
①-③
⑧-⑤
Time limit b contact
①-④
Power LED operation
K-72
Power OFF Delay Analog Timer
Proper Usage (A)
Photoelectric
Sensors
Power
The unit is power OFF delay timer, the time of min. (B)
power supply is 0.1sec for AT8PSN- type and 2sec for Fiber
Optic
AT8PMN- . Therefore be sure that the unit will operation Sensors
Power ON Proximity
Sensors
OFF
(E)
Min. power Time Time stop Pressure
supply time operating Sensors
(F)
Power ON ON Rotary
Power Encoders
OFF OFF
(G)
Connectors/
※Please use the power within rating power and apply. Connector Cables/
Sensor Distribution
Boxes/Sockets
24VDC, 24VAC power supply should be insulated and
(H)
limited voltage/current or Class 2, SELV power supply Temperature
Controllers
device.
(I)
When supplying the power, inrush current flows for a SSRs / Power
Controllers
certain moment.
(J)
When performing dielectric voltage test or insulation Counters
generated.
(N)
Display
Units
This unit may be used in the following environments.
Indoors (O)
Altitude: max. 2,000m Sensor
Controllers
Pollution degree 2
Installation category II (P)
Switching
Mode Power
Supplies
(Q)
Stepper Motors
& Drivers
& Controllers
(R)
Graphic/
Logic
Panels
(S)
Field
Network
Devices
(T)
Software
K-73