0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
77 Ansichten1 Seite
This document provides specifications for MPP Solar's PIP series pure sine wave inverters ranging from 2500W to 4000W. The inverters can output 230V AC power from a 24V or 48V DC battery source. They feature pure sine wave output, high efficiency over 90%, and protections for overloads, temperatures, and battery polarity. The inverters are suitable for RV, marine, and off-grid applications.
This document provides specifications for MPP Solar's PIP series pure sine wave inverters ranging from 2500W to 4000W. The inverters can output 230V AC power from a 24V or 48V DC battery source. They feature pure sine wave output, high efficiency over 90%, and protections for overloads, temperatures, and battery polarity. The inverters are suitable for RV, marine, and off-grid applications.
This document provides specifications for MPP Solar's PIP series pure sine wave inverters ranging from 2500W to 4000W. The inverters can output 230V AC power from a 24V or 48V DC battery source. They feature pure sine wave output, high efficiency over 90%, and protections for overloads, temperatures, and battery polarity. The inverters are suitable for RV, marine, and off-grid applications.
ELECTRICAL SPECIFICATIONS KEY FEATURES Max Continuous Power 2500W 3000W 3500W 4000W ● Pure sine wave output ensures seamless Output Voltage 230V ±5% Output Regulation compatibility with all types of loads. Output Waveform Pure Sine Wave ● Peak efficiency up to >90% Output Frequency 50Hz/60Hz ± 1Hz ● Output available range from 2500W Peak Efficiency >90% to 4000W and 24V to 48V System Voltage 24V / 48V 48V Only ● Supports both 50hz and 60hz DC Input Range 10V~15V / 20V~30V 21V~29V ● 230V nominal output with regulation (220- 240V load compatible) No Load Consumption <15W <20W <20W Standby Consumption N/A <4W <10W ● Large LCD display for system information and basic programming Batt. Reverse Polarity By Fuse (available on 1624/2424 only) Overload Protection >650W Shutdown >1.2KW Shutdown >150% Load for 5sec ● Auto-restart feature upon fault (available Low Battery <10V±0.5V / <20V±0.5V 20-22V (load specific) on 1624/2424 only) LCD / LED LED Only LCD & LED ● Standby power mode Comm. Inteface N/A COM port (reserved) ● Low idle power consumption ENVIRONMENTAL / MECHANICAL SPECIFICATIONS ● Lightweight anodized casing Certification CE certified ● Automatic detection of battery voltage. Operating Temperature 0°C ~ 50°C ● Suitable for wall mounting. Operating Humidity 10~90%RH Non-Condensing ● Inherent safety protections include over- Dimension 62*117*295mm 80*195*360mm 82*232*369mm load, over temperature and short circuit, Weight 2.5Kg 4.5Kg 5.8Kg and battery reverse polarity.
*Product specifications are subject to change without prior notice. MPP Solar is a registered trademark of MPP Solar Inc.